ICARUS ENG ITA - Quiko Italy MANUALS/15 ICARUS/I… · 8 DECLARATION OF CONFORMITY (OF THE...
Transcript of ICARUS ENG ITA - Quiko Italy MANUALS/15 ICARUS/I… · 8 DECLARATION OF CONFORMITY (OF THE...
AUTOMATIC BARRIER
use and maintenance manual
ICARUS
V04/2017
ENGLISH
QK-I30B
QK-I40B
QK-I50B
QK-I60B
3
3
4
5
5
5
6
6
7
7
8
8
8
9
10
12
13
3
ENGLISH
QK-I40BQK-I50BQK-I60B
)
,25
Quiko Italy Sas
Quiko Italy Sas
7
4
25
5
ENGLISH
6
7
ENGLISH
8
9
ENGLISH
,25
8
DECLARATION OF CONFORMITY (OF THE MANUFACTURER)
Manufacturer: QUIKO ITALY SAS
hereby declares, under his liability, that products: QK-I30B, QK-I40B, QK-I50B, QK-I60B
are in compliance with the essential safety requirements of the regulations:
Electro-magnetic Compatibility Directive
Low
Voltage
Directive
Machinery Directive
2006/42/CEE (EN 60204-1:2006)
and their amendments and modifications, and with the regulations set forth by the National Legislative Body of the country in which the machinery is destined for use.
Via Seccalegno, 19 36040 Sossano (VI) Italia
Managing Directo r
Luca Borinato
Sossano, 26/01/2017
2014/35/UE (EN60335-1:2012; EN60335-1/A11:2015; EN60335-2-103:2015)
2014/30/UE (EN61000-6-3:2006;EN61000-6-2:2005; EN61000-6-3/A1:2013; EN61000-3-2:2014; EN61000-3-3:2013)
ENGLISH
�
DECLARATION OF CONFORMITY (OF THE INSTALLER)
The undersigned: Address: in charge of the set-up, declares that the product: Gate type: Location: are in compliance with the essential safety requirements of the regulations: Electro-magnetic Compatibility Directive .........................2004/108/EC Low Voltage Directive ......................................................2006/95/EC Machinery Directive .........................................................2006/42/EC and also declares that the related and/or specific national technical regulations have been followed:
� EN 12453/EN 12445 on Industrial, Commercial and Residential Gates and Doors – Safe Use of Motorized Doors – Requirements and Classification – Test Methods;
� EN 12604/ EN 12605 on Industrial, Commercial and Residential Gates and Doors – Mechanical Aspects – Requirements and Classification – Test Methods;
� CEI 64/8 Electrical Systems Using Nominal Tension Not Higher Than 1000V a.c. and 1500 V d.c.;
� EN 13241-1 (Industrial, commercial and garage doors and gates), conformity evaluation (6.3).
Notes: Place and date: ………………………………………
The Manufacturer can technically improve the quality of its products without any prior notice.
QUIKO ITALYVia Seccalegno, 1936040 Sossano (VI) - ItalyTel. +39 0444 785513Fax +39 0444 [email protected]