IBOC Technology Seminar PPT

21
IBOC TECHNOLOGY PRESENTED BY, MARIA JOSEPH 1

description

IBOC Technology Seminar PPTIBOC Technology SeminarIBOC Technology

Transcript of IBOC Technology Seminar PPT

Page 1: IBOC Technology Seminar PPT

1

IBOC TECHNOLOGY

PRESENTED BY,MARIA JOSEPH

Page 2: IBOC Technology Seminar PPT

2

CONTENTS

Introduction Why Digital Radio? What is IBOC Eureka 147 Block diagram IBOC modes of operation IBOC implementation Techniques Benefits of DAB Why delay in adoption?

Page 3: IBOC Technology Seminar PPT

3

INTRODUCTION

Digital radio, also called digital audio broadcasting (DAB), is transmission and reception of radio signals in the digital domain, as opposed to the traditional analogue transmission/reception by AM and FM systems.

Digital radio is similar to hooking up the digital output from a CD player directly to a radio transmitter. At the other end is a digital-to-analogue converter (DAC), which converts the digital signal back into analogue mode so that it can be heard on the audio system as it was recorded.

In practice, the CD player is hooked up to a control board, which, in turn, routes the signal as part of the feed to the radio station’s transmitter.

Page 4: IBOC Technology Seminar PPT

4

The signal is either impressed onto a signal carrier and transmitted via uplink to a satellite or transmitted across the land.

In both the cases, the signal is received and converted into analogue by a specialized DAC within the radio’s tuner circuit.

Currently, digital radio broadcasts are available in select countries, including the UK , Germany and Canada.

Page 5: IBOC Technology Seminar PPT

5

Why Digital Radio?

The main advantage of digital radio is that it doesn’t have the usual distortion associated with analogue radio such as hissing, popping and phasing.

It is immune to distortion from multipath, adjacent stations.

User get a new array of data-rich services including traffic information, sports score and weather updates, stock prices, etc..

The data is displayed on the LCD in the form of text, images and video. Thus multimedia radio becomes reality.

Page 6: IBOC Technology Seminar PPT

6

Contd…

To explain, in analogue radio, a large number of radio signals can exist in the atmosphere at any time. However each of them is being transmitted on a different radio frequency. Stations that share the same radio frequency are usually far apart so that they don’t interface with each other. In order to receive a station within its transmission range, all we have to do is tune the receiver to its frequency.

The drawback of this analogue mode is that the signals in close proximity in terms of frequency can interfere with each other to some extent, depending on the modulation pattern of the radio station and the ability of the radio receiver to reject interfering adjacent signals.

Page 7: IBOC Technology Seminar PPT

7

What is IBOC?

In-band on -channel (IBOC) is a hybrid method of transmitting digital radio and analog radio broadcast signals simultaneously on the same frequency.

Page 8: IBOC Technology Seminar PPT

8

IBOC: a new system

The IBOC technology allows digital audio broadcasting without the need for new spectrum allocations for the digital signal.

The IBOC system will be compatible with existing tuners as it utilizes the existing AM and FM bands by attaching a digital side band signal to the standard analogue signal.

For digital compression, the IBOC uses a perceptual audio coder (PAC) developed by Lucent Technology.

The USADR AM IBOC DAB system basically comprises the codec, forward error correction(FEC) coding, and interleaving section, modem and blender.

Page 9: IBOC Technology Seminar PPT

9

Eureka 147: The digital radio system in use

Uses at much higher frequencies than standard 88-108Mhz FM band and 0.525-1.705MHz AM band.

UK utilizes Band III (174-240 MHz) Canada uses L-Band (1452-1492MHz) The eureka system broadcasts multiple stations

and services over a single frequency in something called a multiplex.

The bandwidth within the multiplex is allotted to stations as needed.

Stereo programming is typically broadcast at 192kilobits.

Page 10: IBOC Technology Seminar PPT

10

Block diagram of the IBOC DAB transmitter

Page 11: IBOC Technology Seminar PPT

11

IBOC modes of operation

Hybrid mode : In this mode the digital signal isinserted within a 69.041 kHzbandwidth, 129.361 kHz oneither side of the analog FM signal. Each sideband is approximately 23 dB below thetotal power in the FM signal.

Page 12: IBOC Technology Seminar PPT

12

Extended hybrid mode :This mode includes the hybrid mode and additional digital signals are inserted closer to the analog signal, utilizing a 27.617 kHz bandwidth, 101.744 kHz on either side of the analog FM signal. The total power of the digital sidebands is 20dBbelow the nominalpower of the FM analog carrier.

Page 13: IBOC Technology Seminar PPT

13

All Digital mode: This mode replaces the analog signal with additional digital signals and also includes the digital signals of the Hybrid and Extended Hybrid Modes. The total power of the digital sidebands is 10dB below the nominalpower of the replaced FM analogcarrier.

Page 14: IBOC Technology Seminar PPT

14

IBOC implementation Technique The requirement for FM-to-IBOC isolation is

also somewhat difficult to achieve in practice because of the power ratio between FM and IBOC(100:1).

In a combiner that has to deal with a 1:1 power combining ratio, a 26 dB isolation seems to be fine.

There are a few techniques used to combine FM and IBOC signals.

Page 15: IBOC Technology Seminar PPT

15

Low Level Combining Option

Page 16: IBOC Technology Seminar PPT

16

Low level combining relies essentially on a common amplification technique which means that both the host FM and the IBOC signals are amplified in the same Power Amplifier(PA).

This method requires very good linearity from the PA part.

Most PA’s cannot handle common mode amplification at rated output power; they have to be operated in the most linear portion of their transfer curve which results in a substantial back-off(around 6-10 dB).

As IBOC adds about 1% to the total channel power, its power contribution is negligible so the power rating of the antenna is normally not an issue.

Page 17: IBOC Technology Seminar PPT

17

High Level Combining Option

Page 18: IBOC Technology Seminar PPT

18

High level combining is based on the use of distinct power amplifiers for the Host FM and the IBOC signals.

This technique uses an IBOC Power injector which is basically an inverted directional coupler

Its power ratio is selected to minimize the loss on the host path, typically 0.5 dB.

Such an injector offers a loss of about 10 dB on the IBOC path

Page 19: IBOC Technology Seminar PPT

19

Benefits of Digital Audio Broadcasting

High quality digital audio Reliable delivery to fixed, portable and mobile

receivers for interference-free reception. Efficient use of the limited radio frequency

spectrum available. Easy to use receivers. Flexibility and choice of programmes for

listeners. Added-value system features such as

multimedia.

Page 20: IBOC Technology Seminar PPT

20

Why delay in adoption?

Low power FM stations are prone to interference.

IBOC licensing, and service rules have not been adopted yet.

Cost is high.