Ibn majid state companyIbn Majid Company considered the general rule only in the industrial southern...

Ibn majid state company

شركة ابن ماجد للصناعات الهندسية الثقيلة WWW.IBNMAJID.COM [email protected] IRAQ – BASRAH – AL-ZUBEER ROAD



IBN MAJID STATE COMPANY►

A state-owned company and it leading companies in the construction and

engineering works. Our company is equipped with equipment and support

infrastructure to enable the benefit and enhance the possibility of

Industrialists beneficiaries in strengthening their abilities and

achievements

Ibn Majid Company considered the general rule only in the industrial

southern Iraq specialized in the manufacture and installation of heavy

engineering equipment that you need the electricity sector companies and

the oil companies and the industrial sector in southern of Iraq.



►Ibn maid company consists of four main factories in addition to

retaining its sections, namely: -

A. Al Salam factory This plant specializes manufactures naval vessels, steel structure for

bridges that more than10 tons weight



B- Al Nasser Factory This plant specializes in the manufacture of different types of storage

vessels and other kinds of steel structure up to 10 tons weight



C – Al Wafaa factory: -

This plant specializes in the manufacture of different types of storage

vessels and other kinds of steel structure up to 5 tons weight



D - Heat Exchanger Factory

Design, manufacture and repair of heat exchangers for all types

and sizes and capacities, manufacturing convex endings



*other department in company are

Planning and monitoring ►

► Quality Management

► Quality control

Engineering design►

► Accounts

Administrative section ►

► Logistics Operations

► Transportation

Welding School►

► Commercial Department, marketing and media



Quality Management

The quality department is important sections in the company

and consists of

►Internal audit

►Documentation

►Analysis and Measurement and Improvement

The company's system administration to applied and

documented in accordance with international quality standard

iso 9001:2008

According to the application of the system the company has

quality manual and guide the work instructions and procedures

manual and reliably documented and the company has many

internal auditors and head of international auditors and holding

degrees in the quality of internationally accredited agencies and

oversee implementation of the system

Quality control The role of this department is the supervision and inspection

on the quality products of the company and audit the accounts

of all stages of production and work required tests of raw

materials for engineering that tests products and periodic tests

for staff. This section contains the following tests:

1. X-ray test

2. Visual inspection test .

3. Dypenetrant test

4. Ultrasonic and magnetic test.

5. mechanical test.

6. chemical test.

7. Hydrostatic test



►Company staff

Ibn Majid company owns a group of engineers and technicians

those with high technical experience

The company worked on the training and development through

local training and scholarship outside the country to obtain the

necessary expertise for modern machinery and specialized

equipment which the company sought to owning that allows the

company to assume the responsibilities and tasks to carry out

company's activities

ENGINEER

Civil Engineer

Civil Technicians

Technicians

Administrators

Inspectors

Other

93

7

900

80

50

163

7

TOTAL 1300



► Machinery, vehicles and equipment

No . Type item

11 Trailer (BMC ,Scania ) 1

4 Lorry truck (scania) 2

2 Shovel 3

2 Excavator 4

1 Crane 5 tons hiab 5

1 Crane 6 tons hiab 6

1 Crane hiab mak 7

1 Crane tadano 20 ton 8

1 Crane leibherr 30 tons 9

1 Crane leibherr 60 tons 11

1 Crane mantex 20 tons 11

1 Crane truck 12

1 Side boom cat 13

1 Sideboom chitra 14

7 Tractor (newholand) 15

3 Forklift 16

1 Water truck 17

26 Pick up different type 18

22 Mini bus 19

2 Bus ( 28) hyundai 21

2 Bus ( 44) scania 21

1 Half lorry 22

1 Ambulance 23

1 Fire truck 24



►Clients

A- local clients

1)South Oil Company.

2) Ministry of Water Resources.

3) Hartha power station.

4) General Company for Paper Industries.

5) General Fertilizers Company.

6) General Company for Oil refinery in the southern region.

7) General Company for the processing of water and sewage systems.

8) local markets

B – International clients

1- B.P

2- SHELL

3- PETROCHINA



projects in the last thee year The ►

Project Client item

Processing, installation and operation of floating pumps to site Sadr alyousefah number 8

Ministry of Water Resources

1

Processing and installation caravan city of in Al Zubeer Basrah Governorate 2

Processing, installation and operation of floating pumps to basrah water proect number/ 7


3

Processing, installation and operation of floating pumps to Salehia pumping station in Dhi Qar number/2


4

Processing, installation and operation of floating pumps to Al khmisia pumping number/8


5

Civil works Exxon mobil and FOD 6

3 in Artawy 5000 M tank and installation of Manufacturing Soc 7

31000 M tank and installation of Manufacturing SOC 8

in NAHER BIN tank and installation of Manufacturing3AUOMER 5000 M

SOC 9

tanks in Fao ( 8 ) and installation of Manufacturing 358000 m

SOC 10

Manufacturing and installation of tanoma bridge Basrah Governorate 11

Processing, installation and operation of floating pumps in al ashar river To clean it and raise his level number / 8

Basrah Governorate 12

strategic oil pipeline Four stages 200 km 24 inch SOC 13

Manufacturing and installation of 5000 m3 tank And Civil construction of foundation

South Refineries Company

14

Manufacturing and installation of 5000 m3 in DS4 B.P +ROO 15

Extend and welding of tube carrier in the Majnoon field SOC + SHELL 16



► Ibn Majid Company implemented its projects through a joint

venture with specialized companies such as

SEE C.V attached



► Overview about the works at last three year

1- A - Supply plain concrete for base of steel pipe ARAMCO culverts using

sulphate resistant cement with compressive strength of no less than 21 MPa with

mix ratio of (1:1:5:3) 924M3

The steel pipe ARAMCO culverts available in North Romaila. Ibn majid

collected this material, transport and connect the parts of ARAMCO plates

to be cylinder and to be of 22 meter length or more on each cylinder.



B- Supply local soil without compaction to cover the pipes on the 103 Row on the 3side 2 meters deep and 3 meters width in approximate 60000 Mwest and east

C- Supply local soil with compaction under supervision of supervising engineer – 3103 79000 M-102-each 25 cm layer of row101



Civil works for the establishment of the foundations of the tanks in

the Maysan Oil Company

Civil works to covering by reinforcement cement the Shatt al-Swaib crossing in the Majnoon field



Al-Fao storage tanks

Our company has contracted with the Southern Oil Company to set up and installation eight (8) Floating Roof storage tanks

(58,000 m3 each) and pipe system with booster pumps for FAO

Depot, Basra – IRAQ

And this project have a lot of civil works such as

1-The establishment of roads



2- the foundations of tank by Modern way to strengthen the

foundation by deep mixing cement injection



3- Building control station for eight tanks

4- Works poured and installation of concrete supporting for

pipelines



5- Create dyke around each tank 3m height and 5.5 m width compacted



► Al-Tanoma bridge

One of the most important bridges in Basra Governorate Center

Specifications

The length of the bridge 440 meters and a width of 9.6 meters

Showing navigational aperture of 60 meters and a height of 45

meters high towers line

Number of pillars 80



►Supply, installation and operation of floating pumps



►HSE plan

Safety and responsibility of each individual in his work site and

linked to his relationship with around him such as people,

machines, tools, materials, and methods of operating, and

others. Safety is a package of measures aimed at preventing

accidents and work injuries, which is of no less importance for

the production, quality and costs related to it

the Integrated Safety and Environmental Management

1. Define scope: What do I want to do?

2. Analyze hazards: What are the risks of doing it?

3. Develop controls: How can I control those risks?

4. Perform work: Do it (controlling for risks)

5. Evaluate Performance: How can I do better next time?

And our company have Safety procedures guide attached



►Fuel supply plan Our company approached the Ministry of Oil for the processing of gas and oil product according to the annual actual requirement under Tables vehicles and equipment and generators that run to the product above. After obtaining the approval of the Ministry to provide us with the quantity of 110 000 liters monthly share of the company approached the Oil Products Distribution Company South Branch processing compared to the official price and the excess quantity purchased the commercial price, according to the ministry instructions SEE document 1 The company after receipt of the amount by storing them in warehouses inside the company see document 2 equipment and machines, generators calculated according to actual working hours If there are locations outside the city-wide open committee approvals in the oil province of Basra for the purpose of approaching the protection of oil facilities Police for obtaining approvals for the transfer of fuel

Document out of fuel with authorized transportation Fuel delivered to the store keeper of the store at the site officially Fuel release to consumables ( equipment, machinery, vehicles and generator) according to official documented singed by site Eng. And project engineer

Ibn majid state companyIbn Majid Company considered the general rule only in the industrial southern...

Documents

Transcript of Ibn majid state companyIbn Majid Company considered the general rule only in the industrial southern...