IAT 0932 Chapter1 Rev2
Transcript of IAT 0932 Chapter1 Rev2
-
7/28/2019 IAT 0932 Chapter1 Rev2
1/37
CHAPTER 1:Introduction to
Automationand
Manufacturing
Rev: 2_Jan2011
-
7/28/2019 IAT 0932 Chapter1 Rev2
2/37
Reference Book
Automation, Production System and CIM
-
7/28/2019 IAT 0932 Chapter1 Rev2
3/37
Automation Definition
Automation technology concern with theapplication of mechanical, electronic and
computer-based systems to operate and control
production
-
7/28/2019 IAT 0932 Chapter1 Rev2
4/37
Example :* Automatic Machine tools to process
parts (eg.CNC machine)
* Automatic Assembly Machines (eg.Packaging machine)
* Industrial Robotics
* Automatic Material Handling & StorageSystem (eg. Positioning unit)
* Automatic Inspection System forQuality Control (eg. Vision system)
Technology concern with Automation
-
7/28/2019 IAT 0932 Chapter1 Rev2
5/37
Types of Automation
1. Fixed Automation (Hard Automation)
- a system in which the sequence of processing (or
assembly) operations is fixed by the equipmentconfiguration
- Operations in the sequence are simple
- It is Integration/ Coordination of many such operations
into one piece of equipment that makes the systemcomplex
-
7/28/2019 IAT 0932 Chapter1 Rev2
6/37
Fixed Automation (continue)
- Typical features :* High initial investment for custom-engineered equipment
* High production rates
* Inflexible in accommodating product changes
- Economic justification : Product with very high demandrates and volume
- High initial cost of equipment can be spread over a largenumber of unit
- Cost attractive
- Example: ~ Mechanized Assembly Lines (conveyor)
~ Machining Transfer Lines
~ Stamping Machine
~ Forging Machine
-
7/28/2019 IAT 0932 Chapter1 Rev2
7/37
Example of Stamping Machine
-
7/28/2019 IAT 0932 Chapter1 Rev2
8/37
2. Programmable Automation
- the production equipment is designed with the
capability to change the sequence of operations to
accommodate different product configuration
- the operation sequence is controlled by a program
which is a set of instructions coded so that the sys.Can read and interpret them
- New program can be prepared and entered into the
equipment to produce new products
-
7/28/2019 IAT 0932 Chapter1 Rev2
9/37
Programmable Automation (continue)
- Features :
* High investment in general purpose equipment
* Low production rates relative to Fixed Automation
* Flexibility to deal with changes in product configuration* Most suitable for batch production
- Used in low and medium volume production
- The changeover process like reprogram, physical setup,
tools & fixture replacement and required machine settingwill be taking times
- Example: CNC Machine, Robotics
-
7/28/2019 IAT 0932 Chapter1 Rev2
10/37
Example of CNC Machine
-
7/28/2019 IAT 0932 Chapter1 Rev2
11/37
3. Flexible Automation
- capable of producing a variety of products withvirtually no time lost for changeover from one productto the next
- no time lost while reprogramming the system andalternating the physical setup
- the system can produce various combinations andschedules of products instead of requiring that they bemade in separate batches
- Feature:
* High investment for a custom engineered system
* Continuous production of variable mixtures ofproducts
* Medium production rates
* Flexibility to deal with product design variations
-
7/28/2019 IAT 0932 Chapter1 Rev2
12/37
Flexible Automation (continue).
- Essential features that distinguish flexible automation fromprogrammable automation:
* Capacity to change part programs with no lost production
time
* Capability to change over the physical setup again withno lost production time
- These features allow the automated production sys. To
continue production without the downtime between
batches
- Changing the part programs is generally accomplished by
preparing the programs off line on a computer system and
electronically transmitting the programs to automated
production system
-
7/28/2019 IAT 0932 Chapter1 Rev2
13/37
- The use of pallet fixtures that hold the parts and transferinto position at the workplace is one way of implementingthis approach
- Therefore the variety of part is more limited compared to
programmable automation- Example: Flexible Manufacturing System for performing
machining operations
- Changing the physical setup is accomplished by
making the changeover off-line and then moving itinto place simultaneously with the part
Flexible Automation (continue)
-
7/28/2019 IAT 0932 Chapter1 Rev2
14/37
Example of Flexible Manufacturing System
-
7/28/2019 IAT 0932 Chapter1 Rev2
15/37
Produc
tVariety
High
Medium
Low
Low Medium High
Parts per year
Type of Automation as a function Volume and Product Variety
PROGRAMMABLE
AUTOMATION
FLEXIBLE
AUTOMATION
MANUAL
METHOD FIXEDAUTOMATION
-
7/28/2019 IAT 0932 Chapter1 Rev2
16/37
Reason for Automating
1. Increase Productivity
- Higher production rates (Output/hour) are achievedcompared to manual operations
2. High Cost of Labor
- Machine can produce at higher rates of output resultinglower cost per unit labor
3. Labor shortages- Labor shortages stimulate the development of automation asa substitute for labor
4. Trend of labor toward the service sector
- the growth of government employment at federal, state andlocal levels has consumed a certain share of the labor market
- There has been a tendency for people to view factory workas tedious, demeaning and dirty. This view has cause them toseek employment in the service sector
-
7/28/2019 IAT 0932 Chapter1 Rev2
17/37
5. Safety
- By automating the operation and transferring the operator from
an active participation to a supervisory role, work is made safer
6. High cost of raw material
- Greater efficiency in using raw material is need7. Improve Product Quality
- Automation produced parts with greater consistency and
conformity to qualify specifications
8. Reduce Manufacturing Lead Time
- Automation allows the manufacturer to reduce the time between
customer order and product delivery. This gives the manufacturer
a competitive advantage in promoting good customer service
Reason for Automating (continue)..
-
7/28/2019 IAT 0932 Chapter1 Rev2
18/37
9. Reduction of in-process inventory
- Automation tends to accomplish this goal by reducing the time a
work parts spends in the factory
10. High cost of not automating
- The benefits of automation such as improved quality, highersales, better labor relation will bring up company image
Reason for Automating (continue)..
-
7/28/2019 IAT 0932 Chapter1 Rev2
19/37
Manufacturing
-
7/28/2019 IAT 0932 Chapter1 Rev2
20/37
1. Basic Producer
- Take the natural resources and transform iron ore into
steel ingots
Three categories to classify company :
~ in the transformation of natural resources and
basic raw materials into goods
Steel Ingot
-
7/28/2019 IAT 0932 Chapter1 Rev2
21/37
2. Converter
- Take the output of the basic producer and transform theraw materials into various industrial products and some
consumer items-eg: Steel ingot is converted into bar stock or sheet metal
- characteristic : products are uncomplicated in physicalform, product are not assembled item
-
7/28/2019 IAT 0932 Chapter1 Rev2
22/37
3. Fabricator
-Fabricate and assemble final products
* bar stock and sheet metal are tramsform into
machined engine components and
automobile body panel
* plastic are moulded into various shape
- include both the firms that produce the components
and those which assemble the components into
consumer item
-
7/28/2019 IAT 0932 Chapter1 Rev2
23/37
Types of Production
Another way of classifying production activity is
according to the quantity of product made
1. Job Shop Production
- Low Volume, Manufacturing lot size are small
- Use to meet specific requirement
- Variety in the type of work in the plant
- The equipment must be flexible and general purpose
for variety of work
- skill level of worker must be high
- eg: Aircraft, Machine tools
-
7/28/2019 IAT 0932 Chapter1 Rev2
24/37
Example of Aircraft Production
-
7/28/2019 IAT 0932 Chapter1 Rev2
25/37
2. Batch Production
- manufacture of medium size lots of the same item or
product- the lot maybe produced only once, or produced atregular intervals
- purpose : to satisfy continuous customer demand
- capability of production rate to exceeds the demandrate build up inventory
- than it changes over to another model
- when the inventory stock is depleted production isrepeated to build up inventory again
- manufacturing equipment used is general purpose butdesigned for higher rates
- eg: furniture, textbook, components part for assembleconsumer product, machine shop etc
-
7/28/2019 IAT 0932 Chapter1 Rev2
26/37
Example of Batch
Production Products
-
7/28/2019 IAT 0932 Chapter1 Rev2
27/37
3. Mass Production
- continuous specialized manufacture of identical
products- very high production rates
- equipmentdedicated to manufacture particularproduct at very high demand rates
- the entire plan is designed for the exclusive purposefor particular product
- special purpose equipment
- investment machines and special tooling is high
- skill of labor is low due to transferring to machine
- two category of mass production:
(a.) Quantity Production
(b.) Flow Production
-
7/28/2019 IAT 0932 Chapter1 Rev2
28/37
(a.) Quantity Production
- involves the mass production of single parts on standardmachine tools
- eg: injection moulding machine, automatic screw machineetc.
- the production is devoted full time to satisfy very largedemand rate
- eg of items: components for assemble products (screw,bolts, nuts, nails etc)
(b.) Flow Production- the items are made to flow through a sequence of operationby material handling devices (conveyor, moving belts,transfer devices etc)
- eg: * automated transfer for the production of complex
discrete parts* manual assembly lines for assembly of complex
products
* automotive engine block
-
7/28/2019 IAT 0932 Chapter1 Rev2
29/37
Screw Production Machine
(a. Quantity Production)
Manual Production Line
(b. Flow Production)
-
7/28/2019 IAT 0932 Chapter1 Rev2
30/37
Types of Production
Job Shop
Batch
Production
Mass
Production
Production Quantity
Production Rate
Labor Skill LevelEquipment
Special Tooling
Plant Layout
SpecialGeneral
Product FlowProcess
-
7/28/2019 IAT 0932 Chapter1 Rev2
31/37
Manufacturing firms must organize themselves toaccomplish the 5 functions describe above
1. Business Function
2. Product Design
3. Manufacturing Planning
4. Manufacturing Control
5. Factory operation
Manufacturing Activities
-
7/28/2019 IAT 0932 Chapter1 Rev2
32/37
Manufacturing Activities
Factory
Operation
2. Product Design
1. Business
Function
3. Manufacturing
Planning
4. ManufacturingControl
Marketing
Sales
Order entry
Customer billing
Product Development
Engineering Drawing
Bill of Material
Process planning
Master Schedule
Requirement Planning
Capacity Planning
Shop floor control
Quality control
Inventory control
-
7/28/2019 IAT 0932 Chapter1 Rev2
33/37
1. Business Function- Principle means of communicating with the customer
- The beginning and the end of information processing cycle- An order to produce product will typically originate from the
sales and marketing department
2. Product Design- The design will have been provided by the customer
- The cycle of events that initiates a new product design often
originates in the sales and marketing department
- The product design is documented by means of component
drawing, specifications, Bill of Material (BOM) etc- Prototype built for testing and demo
- Upon completion of the design and fabrication of prototype,
management is invited in for a show & tell presentation
-
7/28/2019 IAT 0932 Chapter1 Rev2
34/37
3. Manufacturing Planning
- Information & documentation from design flow into the
manufacturing planning function
- Including manufacturing engineering, industrial engineering
and production planning & control
- The information processing activities in manufacturing
planning include:
(a.) Process Planning
- determining the sequence of the individual processing
and assy. Operations needed to produce part
(b.) Master Schedule
- listing of the products to be made, when they are to bedelivered and in what quantities
- the individual components and subassemblies that
make up each product must be planned
-
7/28/2019 IAT 0932 Chapter1 Rev2
35/37
(c.) Required Planning
- All items (such as raw material, purchase part fromsupplier) must be planned so that they are available
when needed
(d.) Capacity Planning
- concerned with planning the manpower and machine
resources of the firm
-
7/28/2019 IAT 0932 Chapter1 Rev2
36/37
4. Manufacturing Control
- Concerned with managing and controlling physical
operations in the factory to implement the manufacturing
plan
- Production Scheduling : concerned with assigning start
dates and due dates to the various part
- Inventory Control : attempts to balance up too much or toolitter inventory/ stock
- Quality Control : to ensure that the quality of the product and
its component meet the standards specified by the product
designer
-
7/28/2019 IAT 0932 Chapter1 Rev2
37/37
5. Factory Operation
(in manufacturing floor)
1. Processing
2. Assembly
3. Material Handling
4. Inspection & Testing
RawMaterial FinishedProduct
Add
Value
5. Control
Receiving Shipping