i mid-ED-EEE
4
HOLY MARY INSTITUTE OF TECHNOLOGY & SCIENCE (COLLEGE OF ENGINEERING) Bogaram(v),Keesara(M),RR.Dist-501301 DESCRIPTIVE TEST - I A.Y: 2010-11 Branch : EEE Subject : Engg.Drawing Class : I B.Tech Marks : 10 marks Date : 04.01.2011 AN Time : 60 mins. Instructions before you write exam : 1. Do the proper dimensioning while you are drawing the diagrams. 2. Differentiate the thick and thin lines while you are drawing the diagrams. 3. Before drawing the diagrams do proper planning of the sheet. 4. Mention the arrow heads neatly the dimensional lines. Answer any TWO of the following questions 2x5=10 1).On a map, the distance between two points is 14 cm. The real distance between them is 20 Km. Draw a Diagonal scale of this map to read kilometers, hectometers and decameters, and to measure upto 25 Km. Show a distance of 17.65 KM On this scale. 2).The asymptotes of a hyperbola are inclined at 50 to each other. A point on the curve is at the intersection of two lines parallel to the asymptotes and 40 mm away from them. Draw the hyperbola. 3).Inscribe an ellipse in a parallelogram having sides 200 mm and 100 mm long and an included angle of 120 degrees. 4).Draw an involute of a circle of 75 mm diameter. Also draw a normal and a tangent at distance 100 mm from the centre of the circle. 5).Draw an epicycloids generated by a rolling circle of 60 mm diameter for one complete revolution. The radius of the directing circle is 100 mm. Draw a tangent and a normal to it at 150 mm from the centre of the directing circle. HOLY MARY INSTITUTE OF TECHNOLOGY & SCIENCE (COLLEGE OF ENGINEERING) Bogaram(v),Keesara(M),RR.Dist-501301 DESCRIPTIVE TEST - I A.Y: 2010-11 Branch : EEE Subject : Engg.Drawing
-
Upload
rambabudara -
Category
Documents
-
view
214 -
download
0
description
eee
Transcript of i mid-ED-EEE
HOLY MARY INSTITUTE OF TECHNOLOGY & SCIENCE(COLLEGE OF ENGINEERING)
Bogaram(v),Keesara(M),RR.Dist-501301 DESCRIPTIVE TEST - I A.Y: 2010-11
Branch : EEE Subject : Engg.DrawingClass : I B.Tech Marks : 10 marksDate : 04.01.2011 AN Time : 60 mins.Instructions before you write exam :1. Do the proper dimensioning while you are drawing the diagrams.2. Differentiate the thick and thin lines while you are drawing the diagrams.3. Before drawing the diagrams do proper planning of the sheet.4. Mention the arrow heads neatly the dimensional lines.
Answer any TWO of the following questions 2x5=101).On a map, the distance between two points is 14 cm. The real distance between them is 20 Km. Draw a Diagonal scale of this map to read kilometers, hectometers and decameters, and to measure upto 25 Km. Show a distance of 17.65 KM On this scale. 2).The asymptotes of a hyperbola are inclined at 50 to each other. A point on the curve is at the intersection of two lines parallel to the asymptotes and 40 mm away from them. Draw the hyperbola.3).Inscribe an ellipse in a parallelogram having sides 200 mm and 100 mm long and an included angle of 120 degrees.4).Draw an involute of a circle of 75 mm diameter. Also draw a normal and a tangent at distance 100 mm from the centre of the circle. 5).Draw an epicycloids generated by a rolling circle of 60 mm diameter for one complete revolution. The radius of the directing circle is 100 mm. Draw a tangent and a normal to it at 150 mm from the centre of the directing circle.
HOLY MARY INSTITUTE OF TECHNOLOGY & SCIENCE(COLLEGE OF ENGINEERING)
Bogaram(v),Keesara(M),RR.Dist-501301 DESCRIPTIVE TEST - I A.Y: 2010-11
Branch : EEE Subject : Engg.DrawingClass : I B.Tech Marks : 10 marksDate : 04.01.2011 AN Time : 60 mins.Instructions before you write exam :1. Do the proper dimensioning while you are drawing the diagrams.2. Differentiate the thick and thin lines while you are drawing the diagrams.3. Before drawing the diagrams do proper planning of the sheet.4. Mention the arrow heads neatly the dimensional lines.
Answer any TWO of the following questions 2x5=101).On a map, the distance between two points is 14 cm. The real distance between them is 20 Km. Draw a Diagonal scale of this map to read kilometers, hectometers and decameters, and to measure upto 25 Km. Show a distance of 17.65 KM On this scale. 2).The asymptotes of a hyperbola are inclined at 50 to each other. A point on the curve is at the intersection of two lines parallel to the asymptotes and 40 mm away from them. Draw the hyperbola.3).Inscribe an ellipse in a parallelogram having sides 200 mm and 100 mm long and an included angle of 120 degrees.4).Draw an involute of a circle of 75 mm diameter. Also draw a normal and a tangent at distance 100 mm from the centre of the circle. 5).Draw an epicycloids generated by a rolling circle of 60 mm diameter for one complete revolution. The radius of the directing circle is 100 mm. Draw a tangent and a normal to it at 150 mm from the centre of the directing circle.
HOLY MARY INSTITUTE OF TECHNOLOGY & SCIENCE(COLLEGE OF ENGINEERING)
Bogaram(v),Keesara(M),RR.Dist-501301 DESCRIPTIVE TEST - I A.Y: 2010-11
Branch : MECH Subject : Engg.DrawingClass : I B.Tech Marks : 10 marksDate : 06.01.2011 FN Time : 60 mins.Instructions before you write exam :1. Do the proper dimensioning while you are drawing the diagrams.2. Differentiate the thick and thin lines while you are drawing the diagrams.3. Before drawing the diagrams do proper planning of the sheet.4. Mention the arrow heads neatly the dimensional lines.
Answer any TWO of the following questions 2x5=101).An area of 114 sq.cm on a map represents an area of 36 sq.km on the field. Find the S.F of the scale for this map and draw a Diagonal scale to show kilometers, hectometers and decameters, and to measure upto 10 Km. Show a distance of 7.56 Km On this scale. 2).Draw the curve when the distance between the focus and the directrix is 50 mm and eccentricity is 3/4. Also draw the tangent and normal at any point on the curve.3).The foci of an ellipse are 100 mm apart and the minor axis is 70 mm long. Determine the length of the major axis and draw half the ellipse by concentric circles method and the other half by Oblong method.Draw a curve parallel to the ellipse and 25mm away from it.4).Draw an involute of a circle of 75 mm diameter. Also draw a normal and a tangent at distance 100 mm from the centre of the circle. 5).Draw an epicycloids generated by a rolling circle of 60 mm diameter for one complete revolution. The radius of the directing circle is 100 mm. Draw a tangent and a normal to it at 150 mm from the centre of the directing circle.
HOLY MARY INSTITUTE OF TECHNOLOGY & SCIENCE(COLLEGE OF ENGINEERING)
Bogaram(v),Keesara(M),RR.Dist-501301 DESCRIPTIVE TEST - I A.Y: 2010-11
Branch : MECH Subject : Engg.DrawingClass : I B.Tech Marks : 10 marksDate : 06.01.2011 FN Time : 60 mins.Instructions before you write exam :1. Do the proper dimensioning while you are drawing the diagrams.2. Differentiate the thick and thin lines while you are drawing the diagrams.3. Before drawing the diagrams do proper planning of the sheet.4. Mention the arrow heads neatly the dimensional lines.
Answer any TWO of the following questions 2x5=101).An area of 114 sq.cm on a map represents an area of 36 sq.km on the field. Find the S.F of the scale for this map and draw a Diagonal scale to show kilometers, hectometers and decameters, and to measure upto 10 Km. Show a distance of 7.56 Km On this scale. 2).Draw the curve when the distance between the focus and the directrix is 50 mm and eccentricity is 3/4. Also draw the tangent and normal at any point on the curve.3).The foci of an ellipse are 100 mm apart and the minor axis is 70 mm long. Determine the length of the major axis and draw half the ellipse by concentric circles method and the other half by Oblong method.Draw a curve parallel to the ellipse and 25mm away from it.4).Draw an involute of a circle of 75 mm diameter. Also draw a normal and a tangent at distance 100 mm from the centre of the circle. 5).Draw an epicycloids generated by a rolling circle of 60 mm diameter for one complete revolution. The radius of the directing circle is 100 mm. Draw a tangent and a normal to it at 150 mm from the centre of the directing circle.
