I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,
description
Transcript of I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,
![Page 1: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/1.jpg)
![Page 2: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/2.jpg)
I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin, Syed Wajahat Ali, Faraz Ahmad Bhatti, Ibraheem Ali, Bilal Aziz Rajput, Saad Ahmad Sheikh, Bilal Khan, Muddasir Akram Arain, Muhammad Haris Latif and Salman Rasheed.Which helped me to making this presentation good and correcting all mistakes.
![Page 3: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/3.jpg)
History of Multisim.?
Multisim was originally called Electronics Workbench and created by a company called Interactive Image Technology. At the time it was mainly used as an educational tool to teach electronic technician and electronic engineering programs in colleges and universities. National Instruments has maintained this educational legacy, with a specific version of Multisim with features developed for teaching electronics.
In 1999, Multisim was integrated with Ultiboard after the original company merged with Ultimate Technology , a PCB layout software company.
In 2005, Interactive Image Technologies was acquired by National Instruments Electronic Workbench group and Multisim was renamed to NI Multisim.
![Page 4: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/4.jpg)
What is Electronic Workbench/ Multisim.?
Electronics Workbench/Multisim are simulation programs for educators and engineers that can model the behavior of analog / digital circuits and provide a means of analyzing them in a safe and efficient manner.
Benefits of Multisim:1. Provides real-life experience not readily available
due to lack of resources.2. Costs less than the physical equipment that’s
why it motivates the learner.3. Experiment in a safe environment.
![Page 5: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/5.jpg)
Limitation of Multisim
1. Simulation can not really substitute for real – life practice at handling components (e.g. soldering)
2. Cost (personal copy)3. Lack of technical support
User Friendly: 4. Quick access to the most commonly used tools.5. Components are well organized and easy to find.6. Simple procedures in developing circuits.
![Page 6: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/6.jpg)
Multisim User Friendly InterfaceMenu Bar
ComponentsTool Box
Main Tool Bar
Standard Tool Bar
SimulationButton/Bar
Work Window
Instrumentation
Tool Box
![Page 7: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/7.jpg)
Toolbars
Multisim has movable toolbars located at the top and side of the screen.
The following slides identify the most commonly used toolbars.
Standard ToolbarNew File, Open File, Save File, Print etc.
View ToolbarFull Screen, Zoom In, Zoom Out
etc.
![Page 8: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/8.jpg)
Components ToolbarSources, Basics Components, Diodes,
Transistors, Analogue, Indicators, RF and MCU etc.
SimulationRun Simulation, Stop Simulation,
Pause Simulation , Step In etc.
![Page 9: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/9.jpg)
Main ToolbarShow/Hide Spice net list viewer, Breadboard viewer,
Design toolbox viewer, Grapher Analyzer, Create Components etc.
![Page 10: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/10.jpg)
Instrumentations Toolbar.Digital Multimeter
Watt Meter
Word GeneratorLogic Analyzer
Function Generator
2 Channel Oscilloscope
![Page 11: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/11.jpg)
Draw a Simple NAND GATE circuit.
To place components on the window, you can: Click on the component toolbar, then browse
for the part.
Click Place on the menu bar, select components, then browse for the part
![Page 12: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/12.jpg)
Now Select DC Power Source from there respective families (source) and click OK...
First Place Power Source & Ground.
![Page 13: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/13.jpg)
Next, we need to add a Ground. The Select Component window automatically opens after the first component is placed, so all you need to do is click Ground then click OK. If your component window did not automatically open, click the Place Source button to reopen it.
Select Ground & click OK….
![Page 14: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/14.jpg)
Under Group, click the drop-down arrow and
click Transistors.
Next, we will place Transistor from Transistor Menu.
![Page 15: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/15.jpg)
Choose the Required Transistor (nPn & PnP) From Transistor Families.
Select BJT_NPN then Search BC547 & Click OK place it on work place… Place 3 times the same
transistors on work window.
![Page 16: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/16.jpg)
After Placement of these components the work window look like this. Now we can repeat the part placement to place a switches and resistors. See if you can find the switches in the Basic Group.
![Page 17: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/17.jpg)
Place a switch. Choose the switch labeled SPST for single pole, double throw. Then place another
switch like this.
![Page 18: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/18.jpg)
Place a resistor. Choose the 1K value resistor from the resistors sheet & click OK... Another resistor of
value 4.7K also place by same method.
![Page 19: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/19.jpg)
We have placed all of the components that we need for now. For close
Components Box Click Close Button.
![Page 20: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/20.jpg)
Parts can be moved. Make sure that the component has a Bar box around it. Arrange the components to match the above configuration.
![Page 21: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/21.jpg)
According to your circuit designing, you can rotate, Flip vertical or horizontal and change setting (of some components like switches) etc. This is done by right click on selected component then menu will appear.
![Page 22: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/22.jpg)
If you want to change the value of the components like (Sources, resistor, capacitor etc.). Double-click on that component a dialog box will appear from where you can change your values.
Example: you want to change the resistance value double click on it.
Enter your new value here
![Page 23: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/23.jpg)
Wiring the Components
To begin wiring, how over the cursor over a part terminal (end pin). Notice that the cursor changes shape to indicate that you are starting a wire.
Cursor shape changes, showing that a wire is beginning on the ground symbol.
![Page 24: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/24.jpg)
Click once. Now you can start the wire. To end the wire, click on another terminal.
Circuit window after connection between Vcc & Resistor R1.
![Page 25: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/25.jpg)
Continue Wiring
• Click on the top of the source. Move the cursor to the right terminal of resistor R2 and click again. This should draw a wire connecting the parts.
• Continue wiring the circuit until you have a complete circuit.
• After completing the wiring you must check it the connections is correct, if any mistake is found you correct it and simulate the circuit.
![Page 26: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/26.jpg)
Now the circuit is complete. We will start the simulation by using the Play
button.
TTL NAND GATE.ms11
Multisim File Format.
11ES4611ES104
![Page 27: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/27.jpg)
11ES4611ES104
Click here to start the simulation.
TTL NAND GATE.ms11
Multisim File Format.
![Page 28: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/28.jpg)
Analyzing Results.
Inputs Output
S1 S2 X1
1 1 0 - OFF
![Page 29: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/29.jpg)
Inputs Output
S1 S2 X1
0 1 1 - ON
Deg. Probe is Glowing.
![Page 30: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/30.jpg)
Inputs Output
S1 S2 X1
1 0 1 - ON
Deg. Probe is Glowing.
![Page 31: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/31.jpg)
Inputs Output
S1 S2 X1
0 0 1 - ON
Dig. Probe is Glowing.
![Page 32: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/32.jpg)
Hence the circuit design is correct & it proves all the NAND gate results.
Inputs OutputsS1 S2 X11 1 0 – OFF1 0 1 – ON0 1 1 – ON 0 0 1 – ON
Assignment… (submit soft and hard copy)
Design a CMOS NOR gate circuit and simulate it. Also proves all the NOR gate results.
![Page 33: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/33.jpg)
Analyzing of NAND Gate by Digital Instruments
For digitally analyzing of NAND gate we replace the switches and sources by WORD
GENERATOR.
![Page 34: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/34.jpg)
Results Analyze:
0 10
00
1
1 11
01 1
![Page 35: I am thanks full to my friends Tur Ali Sina Khan, Daniyal Siddiqui, Muhammad Umar Yasin,](https://reader037.fdocuments.net/reader037/viewer/2022102809/56814161550346895dad3c61/html5/thumbnails/35.jpg)
THANKS YOU ALL
THANKS YOU ALL
SORRY FOR ANY MISTAKE.