KL7000/8000LYHYUNDAI WIA Heavy Duty Y-Axis CNC Turning Center

The KL7000/8000LY,Y-axis CNC turning center designed with HYuNDAi WiA's engineering expertise to maximize productivity by enhancing rigidity and accuracy of machining.

Technical Leader

KL7000LY KL8000LY[ ] : Option [ ] : Option

Max. Swing mm(in) Ø1,200 (47.2″)Max. Turning Length mm(in) 3,250 (128″)Chuck Size inch [Opt. 24″]

Bar Capacity mm(in) Ø165 (6.5″)

Spindle Speed (rpm) r/min 1,500Motor (Max/Cont.) kW(HP) 45/37 (60.3/50)

Travel (X/Y/Z) mm(in)500/220 (±110)/3,280

(19.7″/8.7″(±4.3″)/129″)

No. of Tool EA 12

Max. Swing mm(in) Ø1,200 (47.2″)Max. Turning Length mm(in) 3,250 (128″)Chuck Size inch [Opt. 32″]

Bar Capacity mm(in)Hydraulic : Ø239 (9.4″),

Air/independent : Ø319 (12.6″)

Spindle Speed (rpm) r/min 700Motor (Max/Cont.) kW(HP) 45/37 (60.3/50)

Travel (X/Y/Z) mm(in)500/220 (±110)/3,280

(19.7″/8.7″(±4.3″)/129″)

No. of Tool EA 12

Heavy Duty, Large Capacity, CNC Turning Center

KL7000/8000LY● Multi-tasking operation with wedge type Y-axis BMT85P turret

● Flat bed with rigidity increased by 25% compared to slant type bed

● 3 Step gear box type main spindle (KL8000LY : 2 step)

● Main spindle thermal displacement minimized

● Rigidity secured through box guideways on all axis

● Structure designed for machining long shafts and pipes with maximum turning length of 3,250mm (128")

01 Basic FeaturesHigh Precision & Heavy Duty CuttingY-axis CNC Turning Center

Wedge Type Y-axis StructureThe wedge type Y-axis offering superb positional accuracy and rigidity ensures increased productivity.

Ball ScrewTravel is stabilized by fixing both ends of the ball screw with double anchored method.

in particular, a large diameter ball screw with proper preload reinforces rigidity and resistance to thermal displacement.

04

0302

High Rigidity Flat Bed StructureKL7000/8000LY is designed with a unique structure analysis only offered by HYuNDAi WiA in the flat bed structure unlike the existing slant bed, resulting in improvements in strong and heavy-duty cutting capability.

Up to 25% additional ridigity compared to slant type bed

01

BMT 85P Turret (Mill Turret)The BMT turret, with 4 screws solidly fixes the holder, showing outstanding performance in powerful cutting applications and is capable of machining complex products by using milling tools.

45° 0°

KL7000LYKL8000LY

04+

05

K

L700

0/80

00LY

H

eavy

Dut

y Y-

Axis

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Powerful Cutting Capability & Large Working Area

Basic Structure

Main SpindleThe main spindle has become sturdier by enlarging its diameter and thickness. The rigidity has been further reinforced by the design combining highly accurate angular ball bearings and roller bearings.

Built-in Tail StockThe large built-in type tailstock makes it possible to maintain stable machining and accuracy even during a powerful heavy-duty cutting operation.

0605

02

01

03

04

05

06

◉ Rapid Traverse Rate (X/Y/Z axis) : 12/10/12 m/min (472/394/472 ipm)

◉ Travel (X/Y/Z axis) : 500/220/3,280 mm (19.7″/8.7″/129″)

Large Machining AreaKL7000/8000LY features the largest machining area in its class, increasing the size of parts that can be machined.

3,250 mm (278″)

Ø920 (36.2″)

02 High-Precision SpindleLong Lasting, High Accuracy & Excellent PerformanceCNC Turning CenterKL7000LY

KL8000LY

To accomplish stability even during the heavy-duty cutting, the spindle is designed with a combination of P4 level double cylindrical roller bearings and angular bearings.

The spindle is equipped with a high torque gear box showing the strength in the heavy-duty cutting. in addition, heat dissipation ribs and fan are attached to the front/rear side making heat discharge faster.

Main Spindle

06+

07

K

L700

0/80

00LY

H

eavy

Dut

y Y-

Axis

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Spindle

MT#6 Built-In Tail StockThe built-in type tailstock ensures high accuracy even the heavy-duty cutting. it can be controlled manually or automatically by program.

◉ Quill Dia : Ø180 (Ø7.1″)◉ Quill Travel : 200 mm (7.9″)◉ Travel : 3,100 mm (122″)◉ Quill Travel Type : Programmable

Spindle Gear BoxGear shift of spindle provides stability and high torque during low speed.

KL7000LY : 3 Step Gear

KL8000LY : 2 Step Gear

C-Axis Control C-axis of KL7000LY can be controlled to 0.001° which makes it possible to process various shapes.

❖ Cs contour control : need prior consultation

0.001°

Power (kW[HP])

0

45[60.3]

700200 50070

45kW[60.3HP] (30min)

45kW[60.3HP] (30min)

T=7,045N·m [5

,196.1lbf·ft]

T=2,385N·m [1

,759.1lbf·ft]

T=6,928N·m [5

,109.8lbf·ft]

T=2,342N·m [1

,727.4lbf·ft]

T=1,117N·m [8

23.9lbf·ft]

Spindle Speed (r/min)

200 50070

Power (kW[HP])

0

45[60.3]

1,500

Spindle Speed (r/min)

Power (kW[HP])

0

45[60.3]

700200 50070

45kW[60.3HP] (30min)

45kW[60.3HP] (30min)

T=7,045N·m [5

,196.1lbf·ft]

T=2,385N·m [1

,759.1lbf·ft]

T=6,928N·m [5

,109.8lbf·ft]

T=2,342N·m [1

,727.4lbf·ft]

T=1,117N·m [8

23.9lbf·ft]

Spindle Speed (r/min)

200 50070

Power (kW[HP])

0

45[60.3]

1,500

Spindle Speed (r/min)

Power (kW[HP])

0

45[60.3]

700200 50070

45kW[60.3HP] (30min)

45kW[60.3HP] (30min)

T=7,045N·m [5

,196.1lbf·ft]

T=2,385N·m [1

,759.1lbf·ft]

T=6,928N·m [5

,109.8lbf·ft]

T=2,342N·m [1

,727.4lbf·ft]

T=1,117N·m [8

23.9lbf·ft]

Spindle Speed (r/min)

200 50070

Power (kW[HP])

0

45[60.3]

1,500

Spindle Speed (r/min)

KL7000LY

KL8000LY

03 Big Bore SpindleMax. Ø320(Ø12.6″), Dual Chuck for Large Size Bar Material CuttingKL7000LY

KL8000LY

K

L700

0/80

00LY

H

eavy

Dut

y Y-

Axis

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

08+

09

KL8000LY Big Bore SpindleMax. Spindle Bore Ø320(Ø12.6″) shows excellent performance in machining large cylindrical parts for oil and gas industry applications.

(Example)

Oil & Gas Pipe Line

Air Chucking System

The machining area is maximized by applying the air chuck to minimize deformation of the material when processing pipes.

Big Bore Spindle

Y-Axis FunctionHigh Accuracy, Highly Reliable, Powerful Wedge Type Y-axis Structure

YS-axis

X-axis

Y-ax

is22

0mm (8

.7″)

Y-ax

is

Wedge Type Y-axis StructureThe KL7000/8000LY is designed with a wedge type Y-axis that is transferred by the simultaneous operation of the Ys-axis and the X-axis. in addtion, excellent rigidity makes possible to perform superb quality when machining a heavy-duty cutting.

04KL7000LYKL8000LY

10+

11

K

L700

0/80

00LY

H

eavy

Dut

y Y-

Axis

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

The large 12-station BMT turret enables the KL7000/8000LY to perform high accuracy milling operations in a single set-up.

The BMT turret is driven by a high torque servo motor with a 0.3 second indexing time in either direction.

Y-Axis Machining

Mill Turret (BMT85P)

Side milling Off-center grooving Off-center drilling

Mill Tool HolderMachining capabilities have been increased with the addition of a straight milling head, which can remove material from the side of the workpiece, and an angular milling head, which can perform i.D. operations.

Angular Milling HeadStraight Milling Head

◉ No. of Tools : 12 EA

◉ Tool Size (OD/iD) : □32/Ø80 (□1.2″/Ø3.1″)◉ indexing Time : 0.3 sec/step

◉ Output (Max./Cont.) : 11/7.5 kW (14.8/10 HP)◉ Torque (Max./Cont.) : 140/95.4 N・m (103.2/70.4 lbf・ft)◉ Speed(rpm) : 3,000 r/min

◉ Collet size : Ø34 (Ø1.3″) (ER50)

Turn/Mill Spindle

750 3,000

35.2[26]

140[103.3]

11[14.8]

7.5[10]

95.4[70.4]

23.5[17.3]

7.5kW [10HP] (S1 Cont.)

11kW [14.8HP] (15min,S3 60%)

140N∙m [103.3lbf∙ft] (15min,S3 60%)

95.4N∙m (S1 Cont.)

Power(kW[HP]) Torque(N∙m[lbf∙ft])

Spindle Speed (r/min)

05Machine Monitoring

Energy Saving

Intelligent Machining

User Convenience

HW-MMS HW

-ESS

HW-eDNC | HW-MCG

User Friendly

HW-TM

Faster processing and enhanced accuracy in are possible through the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.

USB Port (Standard)Convenience is increased when inputting and outputting program. The uSB port is available in addition to the former input output methods such as CF memort card and LAN.

Smart SystemSoftware for Smart Operating and MachiningKL7000LY

KL8000LY

12+

13

K

L700

0/80

00LY

H

eavy

Dut

y Y-

Axis

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

HYuNDAi WiA Smart System

HW-MMS

RemoteSystem

Smart Factory HW-MMS (HYuNDAi WiA-Machine Monitoring System)

A brand new manufacturing machine by HYuNDAi WiA, HW-MMS is a unique software capable of monitoring the operation status of manufacturing machines in factories, a smart solution to improve manufacturing conditions of customers.

01 05

04

03

Real-time monitoring of machine operation status (Cloud)

History and statistics of machine operation (Cloud)

History and statistics of alarm occurrence (Cloud)

History and statistics of work count (Cloud)

Remote diagnosis (Remote)

01

05

04

03

02

02

HW-eDNCHYUNDAI WIA ethernet Direct Numerical Control

This software allows transmition of NC data between PC and a machine's CNC. The processing programs can be managed on the PC through the ethernet or serial communication.

HW-MCGHYUNDAI WIAMachine Guidance

Software that offers operation, maintenance, management monitoring and various user friendly features.

HW-TMHYUNDAI WIA Tool Monitoring

A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.

HW-ESS (Standard)HYUNDAI WIAEnergy Saving System

An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.

User ConvenienceVarious Devices for user Convenience

Operation Panel

The ergonomic design enhances user convenience.

LM guide is installed at the bottom of the machine to enable smooth movement of the operation panel.

06Steady Rest Automatic Q-Setter

For long parts, such as shafts, the optional steady rest increases rigidity and minimizes vibration. When using the programmable hydraulic work rest provided as an option, the position of the work rest can be adjusted according to the shape of the product using the alignment pin connected to the turret. This enhances the efficiency of the machining operation. ※ Steady rest contact dia. : Max. Ø510 (Ø20.1″) for SMW K.6.1

Cutting tools are calibrated quickly and accurately with the addition of a Q-Setter.Each tool tip is touched off automatically by program using a sensor that inputs the position automatically.

(KL8000LY : Manual Q-Setter)

KL7000LY

KL7000LYKL8000LY

Standard & Optional

Specifications are subject to change without notice for improvement.

Spindle KL7000LY KL8000LY

Main SpindleHollow Chuck 3 Jaw

24″ ○ -32″ - ○

Main SpindleSolid Chuck 3 Jaw

24″ - -32″ - -

Big Bore Air Chuck (Dual) 34″ - ○Big Bore independent Chuck (Dual) 32″ - ○Standard Soft Jaw (1set) ○ ○Chuck Clamp Foot Switch ● ●2 Steps Hyd, Pressure Device ○ ○Spindle inside Stopper ☆ ☆5° index ☆ ☆Cs-Axis (0.001°) ● ●Chuck Open/Close Confirmation Device ○(CE:●) ○(CE:●)2 Steps Chuck Foot Switch ○ ○TurretTool Holder ● ●Mill Turret BMT85P ● ●Straight Milling Head (Radial) Adaptor Type ● ●Angular Milling Head (Axial) Adaptor Type ● ●Boring Sleeve ● ●Drill Socket ○ ○u-Drill Cap ● ●Long Boring Bar i.D Holder ☆ ☆Angle Head ☆ ☆Tail Stock & Steady Rest Built-in Tail Stock ● ●Programable Tail Stock ● ●Manual Type Steady Rest ☆ ☆

Manual TypeHyd. Steady Rest

1Set - -2Sets - -

ProgramableHyd. Steady Rest

1Set ○ ○2Sets ○ ○

Fixed center ● ●2 Steps Tail Stock Pressure System ☆ ☆Quill Forward/Reverse Confirmation Device ● ●Tail Stock Foot Switch ● ●Coolant & Air BlowStandard Coolant (Nozzle) ● ●Bed Flushing Coolant ● ●Chuck Coolant (upper Chuck) ○ ○Gun Coolant ○ ○Spindle Thru Coolant (Only for Special Chuck) ☆ ☆Thru Coolant for Live Tool - -Chuck Air Blow (upper Chuck) ○ ○Tail Stock Air Blow (upper Tail Stock) ☆ ☆Turret Air Blow ☆ ☆Air Gun ○ ○Spindle Thru Air Blow (Only for Special Chuck) ☆ ☆

High Pressure Coolant6Bar (87psi) ● ●20Bar (290psi) ○ ○70Bar (1,015psi) ○ ○

Power Coolant System (For Automation) ☆ ☆Coolant Chiller ☆ ☆Chip DisposalCoolant Tank 620ℓ(163.8 gal) ● ●

Chip Conveyor(Hinge/Scraper)

Front (Right) ○ ○Front (Rear) - -

Special Chip Conveyor (Drum Filter) ☆ ☆

Chip Wagon

Standard(180ℓ[47.5 gal]) ○ ○

Swing(200ℓ[52.8 gal]) ○ ○

Large Swing(290ℓ[76.6 gal]) ○ ○

Large Size(330ℓ[87.2 gal]) ○ ○

Customized ☆ ☆

Safety Device KL7000LY KL8000LY

Total Splash Guard ● ●Chuck hydraulic pressure maintenance interlock ○(CE:●) ○(CE:●)Electric DeviceCall Light 1Color : ■ ● ●Call Light 2Color : ■■ ○ ○Call Light 3Color : ■■■ ○ ○Call Light & Buzzer 3Color : ■■■B ○ ○Electric Cabinet Light ○ ○Remote MPG ○ ○Work Counter Digital ○ ○Total Counter Digital ○ ○Tool Counter Digital ○ ○Multi Tool Counter ○ ○Electric Circuit Breaker ○ ○AVR (Auto Voltage Regulator) ☆ ☆Transformer 70kVA ○ ○Auto Power Off ○ ○MeasurementManual Q-Setter - ●Automatic Q-Setter ● -

Work Close Confirmation Device (Only for Special Chuck)

TACO ☆ ☆SMC ☆ ☆

Work Setter ○ ○

Linear ScaleX Axis ○ ○Z Axis ○ ○

Coolant Level Sensor (Only for Chip Conveyor) ☆ ☆EnvironmentAir Conditioner ○ ○Oil Mist Collector ☆ ☆Oil Skimmer ○ ○MQL (Minimal Quantity Lubrication) ☆ ☆Fixture & Automation

Auto DoorStandard ○ ○High Speed ☆ ☆

Auto Shutter (Only for Automatic System) - -Sub Operation Pannel ☆ ☆Bar Feeder interface ○ ○Bar Feeder (FEDEK) ☆ ☆Extra M-Code 4ea ○ ○Automation interface ☆ ☆

i/O Extension (iN & OuT)16 Contact ○ ○32 Contact ○ ○

Parts Catcher Main SP. - -Turret Work Pusher (For Automation) ☆ ☆Hyd. DeviceStandard Hyd. Cylinder Hollow ● ●

Standard Hyd. unit 58bar(841.2psi) / 63ℓ(16.6 gal) ● ●

S/WMachine Guidance (HW-MCG) ☆ ☆Energy Saving System (HW-ESS) ● ●Tool Monitoring (HW-TM) ○ ○DNC software (HW-eDNC) ○ ○Machine Monitoring System (HW-MMS) ☆ ☆Conversational program (HW-DPRO) ○ ○ETCTool Box ● ●Customized Color Need Munsel No. ☆ ☆CAD & CAM ☆ ☆

● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable

14+

15

K

L700

0/80

00LY

H

eavy

Dut

y Y-

Axis

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

SPECIFICATIONS

unit : mm(in)External Dimensions

SPECIFICATIONS

unit : mm(in)Tooling System

I.D Holder

Straight MillHolder

Angular MillHolder

Plug

U-Drill Cap

Boring BarSocket

Colle Chuck

Weldon Adapter

Milling ArborAdapter

Boring Bar

U-Drill

Drill

ER Collets(ER 50)

O.D Holder

Facing Holder

ExtendO.D Holder

BMT 85P12 Station

Face & O.D Tool

Specifications are subject to change without notice for improvement.

KL7000/8000LY Tooling Parts Detail

ITEMKL7000LY / KL8000LY

mm Unit inch Unit

Turning HolderO.D Holder

Right/Left 3 3

Extended 1 1

Facing Holder 1 1

Boring Holder I.D HolderSingle 5 5

Long (SET) - -

Driven HolderStraight Mill Holder Standard 2 2

Angular Mill Holder Standard 2 2

Socket

Boring

Ø20 (Ø3/4″) 1 1

Ø25 (Ø1″) 1 1

Ø32 (Ø1 1/4″) 1 1

Ø40 (Ø1 1/2″) 1 1

Ø50 (Ø2″) 1 1

Ø60 (Ø2 1/4″) 1 1

Drill

MT 3 Opt Opt

MT 4 Opt Opt

MT 5 Opt Opt

ER Collet Opt Opt

Adapter Set 1 Set 1 Set

16+

17

K

L700

0/80

00LY

H

eavy

Dut

y Y-

Axis

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

SPECIFICATIONS

unit : mm(in)Interference

SPECIFICATIONS

unit : mm(in)Interference

18+

19

K

L700

0/80

00LY

H

eavy

Dut

y Y-

Axis

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

SPECIFICATIONS

unit : mm(in)Tooling Travel Range

SPECIFICATIONS

Specifications are subject to change without notice for improvement.

Specifications [ ] : Option

ITEM KL7000LY KL8000LY

CAPACITY

Swing Over the Bed mm(in) Ø1,200 (47.2″)

Swing Over the Carriage mm(in) Ø1,000 (39.4″)

Max. Turning Dia. mm(in) Ø920 (36.2″)

Max. Turning Length mm(in) 3,250 (128″)

Bar Capacity mm(in) Ø165 (6.5″)Hydraulic : Ø239 (9.4″),

Air/Independent : Ø319 (12.6″)

SPINDLE

Chuck Size inch Opt. [24″] Opt. [32″]

Spindle Bore mm(in) Ø185 (7.3″) Ø320 (12.6″)

Spindle Speed (rpm) r/min 1,500 700

Motor (30min./Cont.) kW(HP) 45/37 (60.3/50)

Torque (30min/Cont.) N・m(lbf・ft) 6,928/5,700 (5,109.8/4,204.1) 7,045/5,795 (5,196.1/4,274.2)

Spindle Type - BELT+3STEP GEAR BELT+2STEP GEAR

Spindle Nose - A1-15 A1-20

C-axis indexing deg 0.001˚

FEED

Travel (X/Y/Z) mm(in) 500/220 (±110)/3,280 (19.7″/8.7″(±4.3″)/129″)

Rapid Traverse Rate (X/Y/Z) m/min(ipm) 12/10/12 (472/394/472)

Slide Type - BOX GUIDE

TURRET

No. of Tools ea 12

Tool SizeOD mm(in) □32 (1.3″)

iD mm(in) Ø80 (3.1″)

indexing Time sec/step 0.3

LIvE TOOL

Motor (Max/Cont.) kW(HP) 11/7.5 (14.8/10)

Milling Tool Speed (rpm) r/min 3,000

Torque (Max/Cont.) N・m(lbf・ft) 140/95.4 (103.3/70.4)

Collet Size mm(in) Ø32 (1.3″) (ER50)

Type - BMT85P

TAILSTOCK

Taper - MT6 (Built-in)

Quill Dia. mm(in) Ø160 (6.3″)

Quill Travel mm(in) 200 (7.9)

Travel mm(in) 3,180 (125.2″)

TANKCAPACITY

Coolant Tank ℓ(gal) 620 (163.4)

Lubricating Tank ℓ(gal) 4.0 (1.1)

POWERSUPPLY

Electric Power Supply kVA 55

Thickness of Power Cable Sq Over 50

Voltage V/Hz 220/60 (200/50)

MACHINE

Floor Space (L×W) mm(in) 7,300×3,270 (287.4″x128.7″)

Height mm(in) 2,950 (116.1″)

Weight kg(lb) 24,500 (54,013)

NC Controller - FANUC 32i-A

20+

21

K

L700

0/80

00LY

H

eavy

Dut

y Y-

Axis

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

SPECIFICATIONS

CONTROLLER

Figures in inch are converted from metric values.The FANuC controller specifications are subject to change based on the policy of company CNC supplying.

FANUC 32i-AAxis control / Display unit

Controlled axes

Max. 4 axes are availableX, Z axesX, Z, C axes (M type machine)X, Z, Y, C axes (Y type machine)X, Z, B, C axes (MS type machine)

Simultaneous controllable axes 2axes / Linear and circular (Max. 4axes)

Least input incrementX, Z, Y, B axes : 0.001 mm (0.0001”)C axis : 0.001 deg

Least command incrementX, Z, Y, B axes : 0.001 mm (0.0001”)C axis : 0.001 deg

High speed HRV controlinch / Metric conversion G20 / G21interlock Each axis / All axesMachine lock All axesEmergency stopStored stroke check 1 Over-travelStored stroke check 2Stored stroke check 3Follow-upServo-off

Backlash compensation +/- 0~9999 pulses (Rapid traverse & cutting feed)

Position switchunexpected disturbance torque detection Back-spin torque limiter (BST)High resolution transfer control (HRM)LCD / MDi 10.4″ Color LCDOperationAutomatic operation (memory)MDi operationSearch function Sequence, programProgram restartWrong operation preventionBuffer registerProgram check function Dry run., program checkSingle blockFeed functionsManual jog feed Rapid, jog, handleManual handle feedrate x1, x10, x100Feed command F code feedrate direct commandFeedrate override 0~200 % (10% units)Jog override 0~2,000 mm/min[79 ipm]Rapid traverse override F1, F5, F25/F50, F100%Override cancelFeed per minute / rotationProgram input & interpolation functions

Nano interpolation Positioning / Linear / Circular (G00 / G01 / G02, G03)

Dwell G04, 0~9999.9999 secThread retractVariable lead threading1st reference point return G28, manualReference point return check G272nd reference point return G30Program stop / End M00, M01 / M02, M30Tape code EiA / iSOOptional block skip 1 eaMaximum programmable dimensions +/- 9999.9999″Program number O+4 digitsAbsolute and incremental programmingDecimal point inputPlane selection G17, G18, G19Work coordinate system selection G52 to G59Manual absolute “ON” FixedG code system AProgrammable data input G10Sub program call 10 folds nestedCustom macro B

Program input & interpolation functions

Addition of custom macro common variable #100 to #199, #500 to #999Multiple repetitive cyclesMultiple repetitive cycles ⅡCanned cycles for turningManual guide i Conversational programmingSub / Main spindle functionM-Code function M4 digitsM-Code function lockLock sp. speed command S4 digits, binary outputMain sp. constant control G96, G97Spindle speed override 50% to 150% (10% units)Spindle position decisionRigid tappingTool function / Tool compensationTool function T2 + 2Tool offset pairs 64 pairsTool offsetTool nose radius compensation G40, G41, G42Direct input of measured toolcompensation value BTool life managementData in/output & editing functionsReader / Puncher interface RS232CMemory card input/outputPart program storage length 256 KbyteNumber of registrable programs expansion Max. 500 programsMemory lockBackground editingExtended part program edition Copy, move, change of NC programDisplay, diagnosis & setting functionsSelf-diagnosis functionHistory display Alarm & operation displayHelp functionExternal messageRun hour / Parts count displayDisplay of actual spindle speed and T codeActual cutting feedrate displayOperating monitor screen Rod meter lightGraphic displaySpindle / Servo setting screenSelection of 5 optional languageLCD screen display Screen saverAutomatic data backupFunctions according to machine specificationCs contouring control Turn millStored pitch error compensation Turn millPolar coordinate interpolation Turn millCylindrical interpolation Turn millCanned cycles for drilling Turn millspindle orientation expansion Turn mill, Sub spindleSpindle synchronous control Sub spindleTorque control Sub spindleY axis offset Y type machineAngular axis control Y type machine

OptionHigh speed Ethernet 100 Mbps (Option board is required)Optional block skip 9 ea3rd & 4th reference point returnG code system B / CPart program storage length 512 Kbyte Polygon turningHelical interpolationDynamic graphic displayProtection of data at 8 levelsDirect drawing dimension programming included chamfering / Corner R`

22+

23

K

L700

0/80

00LY

H

eavy

Dut

y Y-

Axis

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

OVERSEAS OFFICES

GLOBAL NETWORK

Changwon Technical Center / R&D Center / Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533)TEL : +82 55 280 9114 FAX : +82 55 282 9680

Uiwang Technical Center / R&D Center37, Cheoldobangmulgwan-ro, uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082)TEL : +82 31 596 8209 Fax : +82 55 210 9804

HEADQUARTER

HYUNDAI WIAMachine Tools America 265, Spring Lake Drive, itasca, iL, 60143

TEL : +1 630 625 5600 FAX : +1 630 625 4733

Jiangsu HYUNDAI WIACompany No.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China

TEL : +86 512 5672 6808FAX : +86 512 5671 6960

Chengdu Branch OfficeNO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China

TEL : +86 028 8665 2985FAX : +86 028 8665 2985

HYUNDAI WIAMachine Tools Europe Kaiserleipromenade 5, 63067 Offenbach, Germany

TEL : +49 69271 472 701FAX : +49 69271 472 719

Hyundai WIA Machine Tools ChinaShanghai Branch Office1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China

TEL : +86 021 6427 9885FAX : +86 021 6427 9890

Qingdao Branch OfficeRoom 1207, Cai Fu Building, 182-6 Haier Middle Road, Qingdao, China

TEL : +86 532 8667 9334FAX : +86 532 8667 9338

Raunheim Service CenterRaunheim R&D CenterFrankfurter. 63, 65479 Raunheim, Germany

TEL : +49 6142 9256 111 FAX : +49 6142 9256 100

Beijing Branch OfficeFloor 14, Zhonghangji Plaza B, No.15 Ronghua South Road, BDA Dist., Daxing Dist., Beijing, China 100176

TEL : +86 010 8453 9850FAX : +86 010 8453 9853

Wuhan Office306-2, A Tower,Jiayu Gpmggian, No12 Chuangye Road, Economic Development Zone, Wuhan, Hubei, China

TEL : +86 027 5952 3256FAX : +86 027 5952 3256

India Branch Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, indiaTEL: +91-44-3290-1719

Guangzhou Branch OfficeRoom 311, unit 1-3, POLY TAL Tu WuN, Hanxi Avenue, Panyu District, Guangzhou, China

TEL : +86 020 8550 6595 FAX : +86 020 8550 6597

Chongqing OfficeRoom 951, #3, Jinrongcheng T3, Jiangbei, Chongqing, China

TEL : +86 23 6701 2970

Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do Tel +82 55 280 9500

Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, uiwang-si, Gyeonggi-do Tel +82 31 593 8173

HYUNDAI WIA Machine Tools America265 Spring Lake Drive,itasca, iL, 60143 Tel +1 (630) 625 5600 Fax +1 (630) 625 4733

HYUNDAI WIA Machine Tools EuropeKaiserleipromenade 5, D-63067 Offenbach, Germany Tel +49 69271 472 701 Fax +49 69271 472 719

India Branch Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, india Tel +91 44 3290 1719

http://machine.hyundai-wia.com

2017-05 001.001 ENG