Hydrostatic Recorder Hydro001
1
Chart Speed 8 h, 12 h, 24 h, 7 days, or selectable hours per revolution Engineering Units barg, kPa, psi, °C, °F CE conformity of Chart recorder 73/23/EEC, 89/336/EEC Shipping Weight 25 kg Power Supply 120/240 Vac 60/50 Hz Power Consumption 20 VA maximum Operating Range 0 - 55 °C (max range) Relative Humidity 5 – 90 % (max range) Protector Case IP Rating IP67 Pen Stylus Life Typically capable of printing one chart per day for five years under clean room conditions. PORTABLE HYDROSTATIC TEST RECORDER DIMENSIONS Protector Case: L 800 mm x W 490 mm x D 320 mm complete with wheels SPECIFICATIONS Digital 1 digit 200 barg Transducer Accuracy ± 0.25 % of Span 600 barg Transducer Accuracy ± 0.25 % of Span Air Temperature Accuracy ± 0.5 °C Water Temperature Accuracy ± 0.5 °C Sampling Rate Each input sampled 3 times in 2 seconds Digital Display A six digit display provides guidance during configuration and operation FEA TURES OPERATION • 4 channel circular data recorder • Watertight mobile protector case • 1 x 200 barg pressure transducer (3 m Cable, ¼ " BSP male) • 1 x 600 barg pressure transducer (3 m Cable, ¼ " BSP male) • 1 x 0-50 °C water temperature sensor c/w ¼ " NPT fitting, 150 mm x 6.35 mm stainless steel stem • 1 x -10 °C to 40 °C air temperature sensor c/w surface • mounting head • Selectable chart rotation • Additional digital display on chart controller • Universal power supply (3 m Cable – other options available) • Creates a permanent, reliable, readable document • Field configurable • UL Listing, CSA & FM approved, CE Mark Recorder • ISO:17025 IANZ temperature & pressure calibration • certificates recognised in over 80 countries HOW TO ORDER • The Hydro 001 is designed to record the most critical hydrostatic test results onto an accurate thermal trace circular chart • The watertight mobile protector case is not only suitable for the most demanding onsite field applications, it is also suitable as a freighting container to anywhere you need to send it OPTIONS (contact us) • Other pressure configurations available - contact us • Other cable lengths available – contact us • Modbus output Model No HYDRO 001-200-600 Chart Paper HC-30755317-001 (box of 100 charts) Pen Arm HR-30756304-501 Teltherm Instruments Ltd 5/343 Church St, Onehunga, Auckland 1642, New Zealand, PO Box 12-171, Penrose, Auckland Phone: +64 9 633 0040 | Fax: +64 9 633 0012 | Email: [email protected] | Web: www.teltherm.co.nz ADV - 48, REVISION 4 - The specifications may change at any time without notice
-
Upload
raju-vraju -
Category
Documents
-
view
212 -
download
0
description
Hydrostatic Recorde MANUAL
Transcript of Hydrostatic Recorder Hydro001
Chart Speed 8 h, 12 h, 24 h, 7 days, or
selectable hours per revolution
Engineering Units barg, kPa, psi, °C, °F
CE conformity of Chart recorder 73/23/EEC, 89/336/EEC
Shipping Weight 25 kg
Power Supply 120/240 Vac 60/50 Hz
Power Consumption 20 VA maximum
Operating Range 0 - 55 °C (max range)
Relative Humidity 5 – 90 % (max range)
Protector Case IP Rating IP67
Pen Stylus Life
Typically capable of printing one
chart per day for five years under
clean room conditions.
PORTABLE HYDROSTATIC TEST RECORDER
DIMENSIONS Protector Case:
L 800 mm x W 490 mm x D 320 mm complete with wheels
SPECIFICATIONS
Digital 1 digit
200 barg Transducer Accuracy ± 0.25 % of Span
600 barg Transducer Accuracy ± 0.25 % of Span
Air Temperature Accuracy ± 0.5 °C
Water Temperature Accuracy ± 0.5 °C
Sampling Rate Each input sampled 3 times in 2
seconds
Digital Display A six digit display provides guidance
during configuration and operation
FEATURES OPERATION
• 4 channel circular data recorder
• Watertight mobile protector case
• 1 x 200 barg pressure transducer (3 m Cable, ¼ " BSP male)
• 1 x 600 barg pressure transducer (3 m Cable, ¼ " BSP male)
• 1 x 0-50 °C water temperature sensor c/w ¼ " NPT fitting, 150 mm x 6.35 mm stainless steel stem
• 1 x -10 °C to 40 °C air temperature sensor c/w surface • mounting head
• Selectable chart rotation
• Additional digital display on chart controller
• Universal power supply (3 m Cable – other options available)
• Creates a permanent, reliable, readable document
• Field configurable
• UL Listing, CSA & FM approved, CE Mark Recorder
• ISO:17025 IANZ temperature & pressure calibration • certificates recognised in over 80 countries
HOW TO ORDER
• The Hydro 001 is designed to record the most
critical hydrostatic test results onto an accurate thermal
trace circular chart
• The watertight mobile protector case is not only
suitable for the most demanding onsite field applications,
it is also suitable as a freighting container to anywhere you
need to send it
OPTIONS (contact us)
• Other pressure configurations available - contact us
• Other cable lengths available – contact us
• Modbus output
Model No
HYDRO 001-200-600
Chart Paper HC-30755317-001 (box of 100 charts)
Pen Arm
HR-30756304-501
Teltherm Instruments Ltd 5/343 Church St, Onehunga, Auckland 1642, New Zealand, PO Box 12-171, Penrose, Auckland
Phone: +64 9 633 0040 | Fax: +64 9 633 0012 | Email: [email protected] | Web: www.teltherm.co.nz
ADV - 48, REVISION 4 - The specifications may change at any time without notice
