hydromatic SK Sewage SerieS SubmerSible Sewage ejector PumPS · SubmerSible Sewage ejector PumPS...
Transcript of hydromatic SK Sewage SerieS SubmerSible Sewage ejector PumPS · SubmerSible Sewage ejector PumPS...
w w w.hydromatic.com
SubmerSible Sewage ejector PumPS
hydromatic® SK Sewage SerieS
applications • Commercial Sewage• Residential Sewage• High-Capacity Sump• Septic Tank Effluent
• The Redesigned SK75 & SK100 Appearance• The SK50 is now Available in Automatic Operation with the New Non-Clog Diaphragm Switch• The SK60 is now Available in Automatic Operation with the Wide Angle Float Switch
SK50
SK75
SK60
SK100
SubmerSible Sewage ejector PumPShydromatic® SK Sewage SerieS
0
10
20
30
40
0 25 50 75 100 125 150CAPACITY-U.S. G.P.M.
TOTA
L DY
NAM
IC H
EAD-
FEET
SK75
SK100
SK60
SK50
Performance data
dimensional data
Pump characteristics
ma te ri als of con struc tion
SK 50 SK 60
SK 75 SK 100
5-1/2PUMPOFF
6-1/2
11-1/2PUMP
ON
11-1/2PUMP
ON
12-5/16
5-1/2PUMPOFF
6-1/2(158)
19(482)16-1/4
(412)
6-1/2(158)
4-3/4
4-5/16 5-7/88-3/4
3-3/4
4-3/4
4-5/165-7/8
8-1/16
3-3/4
19(482)16-1/4
(412)
2" NPTDISCHARGE
2" NPTDISCHARGE
All dimensions in inches. Metric for international use. Component dimensions may vary ± 1/8 inch. Dimensional data not for construction purpose unless certified. Dimensions and weights are approximate. On/Off level adjustable.
Pump/Motor Unit SubmersibleSK50 Manual Models M1 m2SK50 Automatic Models A1 -Horsepower 1/2Full Load Amps 12.0 6.0Motor Type Split Phase w/ Thermal Overload ProtectionTemperature 130o F AmbientWeight 54 lbs.SK60 Manual Models M1 M7 m2 M6 M3 M4 M5SK60 Automatic Models A1 - a2 - - - -Horsepower 6/10Full Load Amps 12 6.9 6.0 3.0 2.5 1.3 1.1Temperature 130o F AmbientWeight 56 lbs.SK75 Manual Models - M7 m2 M6 M3 M4 M5Horsepower 3/4Full Load Amps - 10.4 9.0 4.0 3.5 1.8 1.5Temperature 140o F AmbientWeight 76 lbs.SK100 Manual Models - M7 m2 M6 M3 M4 M5Horsepower 1Full Load Amps - 11.5 11.0 5.0 4.4 2.2 1.7Temperature 140o F AmbientWeight 78 lbs.Motor Type Split Phase Three-PhaseR.P.M. 1750Phase 1 3Voltage 115 200 230 200 230 460 575Hertz 60Operation IntermittentNEMA Design aInsulation Class ADischarge Size 2” NPT std. (3” opt.)Solids Handling 2”
Power Cord
SK50 115V 16/3, SJTA, 1Ø, 10’ std. (20’ opt.)230V 16/3, SJTA, 1Ø, 10’ std.
SK60115V 16/3, STWA, 1Ø, 10’ std. (20’ opt.)
200V/230V 16/3, STWA, 1Ø, 20’ std.3Ø 16/4, STWA, 20’ std.
SK75/SK100 16/3, STWA, 1Ø, 20’ std.16/4, STWA, 3Ø, 20’ std.
Handle SteelLubricating Oil Dielectric OilMotor Housing Cast Iron Pump Casing Cast Iron Shaft Stainless Steel
MechanicalShaft Seal
Seal Faces: Carbon/CeramicSeal Body: Brass
Spring: Stainless SteelBellows: Buna-N
Impeller Cast IronUpper Bearing Single Row Ball BearingLower Bearing Single Row Ball BearingFasteners Stainless Steel
USa CaNaDa293 wright Street, DelavaN, wi 53115 www.hYDrOMatiC.COM 269 trilliUM Drive, KitCheNer, ONtariO, CaNaDa N2g 4w5Ph: 888-957-8677 OrDerS FaX: 800-426-9446 Ph: 519-896-2163 OrDerS FaX: 519-896-6337
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
© 2012 Pentair ltd. all rights reserved. W-02-7190 (11/21/12)