Hydrocore Ltd NEW
-
Upload
karen-bell -
Category
Documents
-
view
83 -
download
2
Transcript of Hydrocore Ltd NEW
Version: 2.0.3 http://www.hydrocore.co.uk
Manufacturers of
Low and High Pressure Water Mist Delivery Systems and Emitter Nozzles.
Address : Hydrocore Ltd , Craven House, Harpings Business Park, Harpings Road, Hull, HU5 4JF.
Tel: 01482 629290 Email: [email protected]
Version: 2.0.3 http://www.hydrocore.co.uk
What is Water Mist
Technology Company R&D Application
Version: 2.0.3 http://www.hydrocore.co.uk
Definition--NFPADroplet
Diameter / µmDefinition
1000 Sprinkler
400 – 1000Class 3
(Low pressure)
200 – 400Class 2
(Low pressure)
1 – 200Class 1
(High pressure)
NFPA: Dv0.99, for the flow-weighted cumulative volumetric distribution of water droplets, is less than 1000 microns at the minimum design operating pressure of the water mist nozzle.
Version: 2.0.3 http://www.hydrocore.co.uk
Principals of Hydrocore Water Mist
Energy Oxygen
MaterialCooling
Displacement
Version: 2.0.3 http://www.hydrocore.co.uk
Cooling Effect
Droplet Diameter / µm Reaction Surface / m² / l
1000 2
100 20
10 200
The small droplet size has large reaction surface which makes the absorption of heat very efficient.
Version: 2.0.3 http://www.hydrocore.co.uk
Cooling Effect and Radiant Heat Attenuation
100
120 0 240 360 480 600
200
300
400
500
600
700
800
900
0
Time(s)
Tem
pera
ture
/℃
—— T1 ------ T2 …… T3
Test Result
WM system activates
Effective cooling reduces the temperature of the fire in a very short time. Temperature away from the source drops below re-ignition temperature. Safer environment during fire activation.
Version: 2.0.3 http://www.hydrocore.co.uk
Advantages of Water Mist
Less water required / usage.Typically uses 10% of the volume of water required by a sprinkler system.
Less damage.Water mist is not a deluge system, it smothers fire by means of droplet expansion.
Less down time after a fire in a production environment.
Typically equipment with a IP24 rating or greater will not even be affected by water mist.
Easier installationPipe work diameters are substantially smaller than required by a sprinkler system.
Version: 2.0.3 http://www.hydrocore.co.uk
Scale of Water Damage
Version: 2.0.3 http://www.hydrocore.co.uk
Suitable Applications for Water Mist
Libraries Hotels Hospitals
Typical applications and benefits for Water Mist. Suppressing the fire to prevent spread. Absorbing smoke to keep clean air available to breathe. Allows more time for evacuation.
Version: 2.0.3 http://www.hydrocore.co.uk
Suitable Applications for Water Mist – Cont.
Transformer SubstationUnderground Tunnel
Typical applications – Cont. Less down time after activation. Absorbing smoke to decrease damage. Less water consumed. Keep temperatures low and maintain high visibility. Easier to recover and resume activity.
Version: 2.0.3 http://www.hydrocore.co.uk
Why Choose Hydrocore
Technology Company R&D Application
Version: 2.0.3 http://www.hydrocore.co.uk
Advanced Technology – Delivery Pump
• 9 – Plunger rotary pumpMore consistent flowNo maintenance requiredSelf-cooling
P60 and P6 Water Hydraulic Delivery Pumps. Manufactured completely from 316 Stainless Steel.Delivering between 8 - 100 LTR/MIN each.
Version: 2.0.3 http://www.hydrocore.co.uk
Advanced Technology – Pump Unit
• The XSWB range of water mist pump units offer delivery systems from 8 LTR/MIN up to 700 LTR/MIN – 80Bar up to 140Bar.
Version: 2.0.3 http://www.hydrocore.co.uk
Advanced Technology - Valve
Electrically operated valve.More reliable than a pneumatic valve.
Pneumatic valve requires an air source.More reliable than solenoid valve
Solenoid valves have a high possibility of false positives.
Version: 2.0.3 http://www.hydrocore.co.uk
Advanced Technology - Nozzles
• 10 Micron filter in nozzle body.• Co Efficiency testing of open nozzles. (1 in 50)• Safety factor testing of closed nozzles up to 21mpa (210Bar
(2700psi)). (100% Individually Tested)• Droplet size: Dv0.99 < 100 μm
Version: 2.0.3 http://www.hydrocore.co.uk
Advanced Technology - Nozzles
• Live fire test. Closed nozzle activation time. (Under 10 seconds). (With protective shroud attached)
• Frangible bulb testing up to 37 degrees for 10 minutes. (1 in 50). (Sample heated to destruct and temperature result recorded)
Version: 2.0.3 http://www.hydrocore.co.uk
On Site Test Equipment
Version: 2.0.3 http://www.hydrocore.co.uk
Production Facility – 1 Hectare Site
Version: 2.0.3 http://www.hydrocore.co.uk
Approvals
• FM Approval – XSWB Open Nozzle.• BRE / LPCB – XSWB Delivery Unit with Open and
Closed Nozzle.• CCCF – QMS.• ISO – LPCB QMS.• SOLAS Chapter II-2. • IMO Resolution A.800 (19).• BSI-QMS
Version: 2.0.3 http://www.hydrocore.co.uk
The Team
Tony Sims 01482 309285Director
Kev Gay 01482 309290Operations Mgr
Gareth Edge 01482 309283Q/S
Karen Bell 01482 309281Sales Executive
Penny Cox 01482 629290Admin/Accounts
Version: 2.0.3 http://www.hydrocore.co.uk
Research & Development
Technology Company R&D Application
Version: 2.0.3 http://www.hydrocore.co.uk
Control Panels Designed and Built in House
Version: 2.0.3 http://www.hydrocore.co.uk
Recent Products
• Frangible bulb protection from false activation.
• Continual development of the Domestic System
Version: 2.0.3 http://www.hydrocore.co.uk
Application
Technology Company R&D Application
Version: 2.0.3 http://www.hydrocore.co.uk
Recent Projects Completed.
• Foundry, Lincoln – Protecting Hammer Head Presses.• Major Hotel Chain, London – Protecting Public Areas.
• Residential, London – Protecting the whole accommodation.• Currently designing a bespoke turbine application.
Version: 2.0.3 http://www.hydrocore.co.uk
Summary of Hydrocore
• Independent approvals.• UK manufacture and assembly.• Full design and calculation capabilities.• On site commissioning and training support.• Twelve years experience.• In house quality and testing procedures.• Investing in innovation, R&D and technology.
Version: 2.0.3 http://www.hydrocore.co.uk
Thank you for your time
For all your Water Mist enquiries please
contact Hydrocore on 01482 629290
or Karens mobile 07878 630583
Address : Hydrocore Ltd , Craven House, Harpings Business Park, Harpings Road, Hull, HU5 4JF.Tel: 01482 629290 Email: [email protected]