HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKER ......Zugankerzylinder, nach ISO 6020/2 Norm, auch für...
Transcript of HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKER ......Zugankerzylinder, nach ISO 6020/2 Norm, auch für...
1
ISO 6020/2 HYDRAULISCHE SERVOZYLINDERISO 6020/2 SERVOCYLINDERS
HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKERtIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
HYDRAULIKZYLINDER ISO 6020/2 MIT GEGENFLANSCHCOUNtER FLANGES ISO 6020/2 HYDRAULIC CYLINDERS
HYDRAULIKZYLINDER ISO 6022ISO 6022 HYDRAULIC CYLINDERS
SERVOZYLINDER ISO 6022ISO 6022 SERVOCYLINDERS
ZUBEHÖR FÜR HYDRAULISCHE ISO ZYLINDERACCESSORIES FOR ISO HYDRAULIC CYLINDERS
KOMPAKTE HYDRAULIKZYLINDER FÜR LEICHTE ANFORDERUNGENLIGHt COMPACt HYDRAULIC CYLINDERS
KOMPAKTE HYDRAULIKZYLINDER FÜR SCHWERLASTANFORDERUNGENHEAVY DUtY COMPACt HYDRAULIC CYLINDERS
DREHANTRIEBEROtARY ACtUAtORS
TECHNISCHE TABELLENtECHNICAL tABLES
26-27
4-15
16-25
30-37
38-39
40-41
44-47
48-51
54-57
60-63
1
2
3
4
5
6
3
HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKERtIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
BESTELLCODEORDERING CODE
TECHNISCHE EIGENSCHAFTEN tECHNICAL CHARACtERIStICS
KOLBENSTANGENENDENROD END
INTEGRIERTE PLATTEN INCORPORAtED PLAtES
ISO 6020/2 HYDRAULISCHE SERVOZYLINDERISO 6020/2 SERVOCYLINDERS
MONTAGE MOUNtING
BESTELLCODEORDERING CODE
NÄHERUNGSSCHALTERPROXIMItY SWItCHES
TECHNISCHE EIGENSCHAFTEN tECHNICAL CHARACtERIStICS
ABMESSUNGENDIMENSION
OPTIONEN UND SPEZIALAUSFÜHRUNGENOPtIONS AND SPECIAL VERSIONS
MAGNETSCHALTERMAGNEtIC SWItCHES
HYDRAULIKZYLINDER ISO 6020/2 MIT GEGENFLANSCHWItH COUNtER FLANGES ISO 6020/2 HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTEN tECHNICAL CHARACtERIStICS
KOLBENSTANGENENDENROD END
MONTAGEMOUNtING
BESTELLCODEORDERING CODE
ABMESSUNGEN DIMENSION
OPTIONEN UND SPEZIALAUSFÜRUNGENOPtIONS AND SPECIAL VERSIONS
INTEGRIERTE PLATTEN INCORPORAtED PLAtES
1-1
1-2
1-3
3-1 ZUBEHÖR FÜR HYDRAULISCHE ISO ZYLINDER ACCESSORIES FOR ISO HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTEN tECHNICAL CHARACtERIStICS
1
4-5
10
13
6-8
11
14
9
12
15
16-17
22
18-20
23
21
24
26
27
40-41
4
1
CD/DK
Standardzylinder Standard cylinders
Kolbendurchmesser mm Bore
Arbeitsdruck bar Pressure
Max. Hub mm Max stroke
Hubtoleranz Stroke tolerance
Fluid Fluid Viskosität Viscosity
ISO 6020/2 - DIN 24554 mit Zuganker / tie rods
von 25 bis 100 from 25 to 100
Betriebsdruck 160 operating
4000 0 + 2 mm Standard ISO 8131 ISO 8131 Standard
Mineralöl Hydraulic mineral oil Phosphorester Phosphoric esters HFC-Medium HFC-fluid
12... 90 mm2/S
TECHNISCHE EIGENSCHAFTEN SPECIFICATIONS
CD DKvon 125 bis 200 from 125 to 200
max 210
HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKERtIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
MD MAGNETIC / MAGNETIC
Standardzylinder Standard cylinders
Kolbendurchmesser mm Bore
Arbeitsdruck bar Pressure
Flüssigkeitstemperatur ̊ C Fluid temperature
Max. Hub mm Max stroke
Hubtoleranz Stroke tolerance
Fluid Fluid
Viskosität Viscosity
ISO 6020/2 - DIN 24554 mit Zuganker / tie rods
von 25 bis 125 from 25 to 125
max 160
Kompatibel mit der Betriebstemperatur der Näherungsschalter. Compatibly with magnetic proximity switches operating temperature limits.
4000 0 + 2 mm Standard ISO 8131 ISO 8131 Standard
Mineralöl Hydraulic mineral oil Phosphorester Phosphoric esters HFC-Medium HFC-fluid
12... 90 mm2/S
TECHNISCHE EIGENSCHAFT SPECIFICATIONS
Zugankerzylinder, nach ISO 6020/2 Norm, auch für den Einsatz mit magnetischen Sensoren.Es sind alle nach ISO Standard definierten Befestigungen und verschiedene Dichtungsarten erhältlich.Alle Zylinder werden nach ISO 10100 Norm geprüft.Für einen Hub grösser als 2000 mm, empfehlen wir Zylinder der HD / HK Serie zu verwenden (Seite 16).
Tie rods hydraulic cylinder, in compliance with the ISO 6020/2 standard, also available with magnetic sensors.All standard ISO mountings are available, in several seals configurations, depending on application conditions and desired performances.All cylinders are tested in compliance with the ISO 10100 standard.In the event of strokes longer than 2000 mm, we recommend the use of the cylinders series HD / HK (see page 16).
0,5 m/s
1 m/s
1 m/s
0,5 m/s
- 20
- 20
- 20
- 20
+ 80
+ 80
+ 150
+ 80
DichtungscodeSeal code Hohe Festigkeit
High sealingHydrauliköl
Hydraulic oil
Phosphor-säureesterPhosphoric
esters
HFC-MediumHFC-fluid
NiedrigeReibung
Low friction
Maximale Geschwindigkeit
Max speed
Temp °C
Min Max
LeistungPerformance
Fluid Fluid
S L H G
√
√
√
√
√
√
√ √
√
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
Komponenten
Abstreifer
Kolbenstangendichtung
OR Kolbendichtung
Kolbenstangendichtung
OR Zylinderrohrdichtung
Kopf-Buchsen-Abdichtung
OR Kolbendichtung
Kolbenführung
5
1
HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKERtIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
S L H GNute Groove
Werkstoff Material
14
15
16
17
18
19
20
21
ISO 7425/2
NBR + PTFE NBR + PTFE NBR + PTFE CGViton® + PTFE
NBR + PTFE NBR + PTFE NBR + PTFE CGViton® + PTFE
PU NBR + PTFE NBR + PTFE CGViton® + PTFE
Viton® + PTFE
NBR
NBR + PTFE
NBR
NBR + PTFE
NBR
NBR + PTFE CG
Viton®
NBR NBR NBRViton®
NBR + PU NBR + PTFE NBR + PTFE CGViton® + PTFE
ISO 7425/2
ISO 7425/1
Komponenten
Abstreifer
Kolbenstangendichtung
OR Kolbendichtung
Kolbenstangendichtung
OR Zylinderrohrdichtung
Kopf-Buchsen-Abdichtung
OR Kolbendichtung
Kolbenführung
Component
Rod wiper
Rod seal
Piston seal
Rod seal
Tube seal
Head-bushing sealing
Piston seal
Piston guide PhenoplastResin
PhenoplastResin
PhenoplastResin
PhenoplastResin
1142 6 9 12
14
10875431
15 2118 1819 201617
13
CD
24
20 21
2322
19
MD MAGNETISCHE VERSION MAGNETIC VERSION
DK
Materiale / Material Spec.Componente / Component
Poliert / Honed H8 - Ra 0.40 µm
Brüniert / Burnished
Brüniert / Burnished
Brüniert / Burnished
Gerollte Gewinde / Rolled threaded
123
4
5
6789
10111213222324
Bronze
Stahl
Stahl
Stahl
Stahl
Verchromter Stahl
Gehärteter Stahl
Stahl
Gehärteter StahlStahl
Stahl
Stahl
Legierter Stahl
Edelstahl
Edelstahl
Werkstoff
Bronze
Steel
Steel
Steel
SteelChromeplated steel
Hardened steel
Steel
Hardened steelSteel
SteelSteel
Alloy steel
Stainless steel
Stainless steel
Material Kenngrössen SpecificationsVerschlussflansch
Führungsbuchse
Zylinderkopf vorne
Einstellbare Dämpfung + Entlüftung
Zylinderrohr
Kolbenstange
Vordere Dämpfung
Kolben
Hintere Dämpfung
Zylinderkopf hinten
(Kolben) Selbstsichernde Mutter
(Zuganker) Selbstsichernde Mutter
Zuganker
Magnetischer Kolben
Magnet
Zylinderrohr
KomponentenClosing flangeGuide bushing
Front head
Cushioning adjusting + air bleed
Cylinder body
Piston rod
Front cushioning
Piston
Rear cushioning
Rear head
Rod self-locking nut
Tie-rod self-locking nut
Tie-rod
Magnetic piston
Magnet
Cylinder body
Component
3 4 5 7 8 11106 42
201917 1818 2115 1614
1312
Cr 25 µm ISO f7 - Ra 0.20 µm
6
1
LÖCHER MIT GEWINDE VORNE x ISO MX5 FRONT THREAdEd HOLES
FLANSCH VORNE A ISO ME5 FRONT FLANGE
FLANSCH HINTEN b ISO ME6 REAR FLANGE
GELENKLAGER D ISO MP5 BALL JOINTEd EYE
SCHARNIER (LASCHE) C ISO MP3 MALE CLEVIS
GABELSCHARNIER M ISO MP1 FEMALE CLEVIS
HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKERtIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
MONTAGEMOUNtING
VD
WH
BGAA
RT
HE TG
WF
KB TG
E
ZJ+
ØB
EEF
Y PJ+
EETOUO
FBF
Y PJ+
ØRD
*
KBGFWF
H
R
EZJ+
ØB
VD
JA
ZJ+ HER
Y PJ+ FB
TOUO EEØB
VD
YEE PJ+
EH
E
EXEP
XO+
LT
CX
MS
ØB
VD
3°3°
MR
CD
L
XC+
EW
E
HE
PJ+EE Y
ØB
VD
Y PJ+
XC+
L
CD
MR
ØB
VD
EE
EH
CF
CB
DK CDPJ+Y
H
E
EE
E
LH
US
ØSB
TSSS+
JA
ZJ+
GXS
WF
ST
GWH
CO KCCO KC
ØB
VD
FUSSBEFESTIGUNG e ISO MS2 FEET
*Siehe die Anmerkung auf Seite 9*See note at page 9
MONTAGEMOUNtING
7
1
SCHWENKZAPFEN VORNE g ISO MT1 FRONT TRuNNIONS
SCHWENKZAPFEN IN DER MITTE h ISO MT4 INTERMEdIATE TRuNNIONS
SCHWENKZAPFEN HINTEN l ISO MT2 REAR TRuNNIONS
ZUGANKERVERLÄNGERUNG VORNE UND HINTEN Q ISO MX1 FRONT ANd REAR EXTENdEd TIE-ROdS
ZUGANKERVERLÄNGERUNG VORNE R ISO MX3 EXTENdEd FRONT TIE-ROdS
ZUGANKERVERLÄNGERUNG HINTEN s ISO MX2 EXTENdEd REAR TIE-ROdS
LÖCHER MIT GEWINDE HINTEN T ISO MX6 REAR THREAdEd HOLES
HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKERtIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
MONTAGEMOUNtING
PJ+YG EEH
ZG+
XG
UT
TC
E ØTDØB
VD
Y
BDEE
PJ+
ØTDUW
ZJ+
XVmin/XVmax+ TM
UMKB
ØB
VD
EE PJ+Y
E ØTD
H
UT
TC XJ+
ZL+ KB
ØB
VD
VD
AA
BB E
TGWH
ZJ+H
E TG
DD
EEBB
PJ+Y
ØB
PJ+YEE
BB
DD
AA
ZJ+
WH
EKB
TG
TGEH
VD
ØB
BBZJ+
AA
TG
E
H
TGE
PJ+
DD
EE Y
ØB
VD
YEE
RT
PJ+
E TG
H
E
TG
AA
ZJ+
BGØB
VD
8
1
LÖCHER MIT GEWINDE VORNE x FRONT THREAdEd HOLES
FLANSCH VORNE A FRONT FLANGE
FUSSBEFESTIGUNG e FEET
SCHWENKZAPFEN VORNE g FRONT TRuNNIONS
SCHWENKZAPFEN IN DER MITTE h INTERMEdIATE TRuNNIONS
ZUGANKERVERLÄNGERUNG VORNE UND HINTEN Q FRONT ANd REAR EXTENdEd TIE-ROdS
HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKERtIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
BEFESTIGUNGEN MIT ZWEIFACHER KOLBENSTANGE DOUBLE ROD MOUNtINGS
VD
ØB1
WH
BGAA
RT
EE
HE TG
TG
E
WH+WF
ZM++
F
PJ+Y
KB
VD
ØB2
EETOUO
FB
WF GF
H
R
E
WH+
ZM++
ØRD
*
KB
Y PJ+
VD
ØB2
ØB1
VD
F
ØTDE
TC
UT
WH+XG
ZP++
PJ+YG
EEHKB
VD
ØB2
ØB1
VD
UW
ØTD
TM
UM
WH+XVmin/XVmax+
ZM++
EEBD
Y PJ+
KBKB
VD
ØB2
ØB1
VD
WH
VD
WH+
ZM++
E TG
TG
E
AA
DD
EEBB
H
PJ+
BB
Y
ØB1
ØB2
VD
*Siehe die Anmerkung auf Seite 9*See note at page 9
G
WH
HE
LHST
TSUS
ØSBWF+WF
XS
G
SS+ZM++
EE
E
Y PJ+
KB
CO KC VD
ØB2
ØB1
VD
ABMESSUNGENDIMENSION
9
1
HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKERtIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
ABMESSUNGENDIMENSION
AABBBDBGCB
CD h8CF
CO H8CXDD
E maxEEEP
EW h14EXF
FB H13GGFHJAKBKCL
LH h10LT
MR maxMS max
PJR
RD f8RT
SB H13SSSTTC
TD f8TGTMTOTSUMUOUSUTUWVDWFWHXCXGXJXOXS
XV min / maxY
YGZGZJZLZMZP
B f9 40192012
16(*)1040—
12 -0.008M5x0.8
40G 1/4”
91210105.532255
327
—1319161220
49+ (*)2738M56.673+8.53812
28.348515468657258456
2515
127+44
95+ (*)130+
3367 / 72+
45 (*)45 (*)114+114+114+
139++139++
47242515161245—
16 -0.008M6x1
45G 1/4”
121614106.6
35.5255
35.510—19222017
22.547+ (*)
3342M69
73+12.54416
33.25558637970846850123525
147+54
109+ (*)148+
4583 / 80+
58 (*)58 (*)128+128+128+
163++163++
5935291620146012
20 -0.012M8x1
60G 3/8”
14201610114638—46134
1931251729
58+ (*)4162M811
98+12.56320
41.7768783
1081101039570123525
172+57
131+ (*)178+
4596 / 92+
65 (*)65 (*)153+153+153+
188++188++
7446381830207412
25 -0.012M12x1.25
75G 1/2”
18302016144538—45174.53237312933
62+ (*)5274
M1214
92+197625
52.389
105102129130127116909
4125
191+64
136+ (*)190+
54106 / 94+
69 (*)69 (*)159+159+159+
200++200++
9146481830209016
30 -0.012M12x1.25
90G 1/2”
20302216144538—45174.53244382940
64+ (*)65
88 (**)M1218
86+268932
64.3100117124150145161139100134832
200+70
146+ (*)206+
65118 / 98+
76 (*)76 (*)168+168+168+
216++216++
117595824402811016
40 -0.012M16x1.5
115G 3/4”
24402820185245—522353957483450
77+ (*)83
105 (**)M1618
105+2611440
82.7127149149191180186178130
95131
229+76
165+ (*)238+
68133 / 108+
82 (*)82 (*)190+190+190+
241++241++
137596824503613016
50 -0.012M16x1.5
130G 3/4”
30503522185545—552365463585062
78+ (*)97
125 (**)M1626
102+3212750
96.9140162172220200216207140105735
257+71
177+ (*)261+
79147 / 113+
91 (*)79 (*)191+203+203+
260++248++
178818830
64(*)4516420
60 -0.015M22x1.5
165G 1”38604422228758—653065782725380
117+126
150 (**)M2226
131+3216563
125.9178208210278250254265180105735
289+75
214+ (*)304+
79166 / 123+
8686
232+232+254+
289++289++
2199210835
80(*)5620030
80 -0.015M27x2
200G 1”47705525269558—70358631019259100
130+155
170 (**)M2733
130+3820380
154.9215253260341300318329215
75732
308+75
227+ (*)337+
86182 / 120+
8686
245+245+270+
302++302++
26911512540807024040
100 -0.020M30x2
245G 1 1/4”
588070253311776—923788212211678120
165+190
210 (**)M3039
172+44241100
190.227930031143936038140130075732
381+85
271+ (*)415+
92213 / 142+
9898
299+299+324+
356++356++
25 32 40 50 63 80 100 125 160 200KolbenBore
24 30
Kolbenstange
Rod 12 18 14
26
18
30
22
34
18
30
22
34
28
42
22
34
28
42
36
50
28
42
36
50
45
60
36
50
45
60
56
72
45
60
56
72
70
88
56
72
70
88
90
108
70
88
90
108
110
133
90
108
110
133
140
163
(*) Nicht gemäss ISO 6020/2. Does not comply with ISO 6020/2 standard.(**) Einheitliches RD-Maß mit Bezug auf die größere Kolbenstange als in der Norm ISO 6020/2 vorgesehen. RD dimension is unified, with reference to the higher diameter between the ones defined by ISO 6020/2 standard. Special RD dimension on request.
+ = den Hub addieren add the stroke ++ = den doppelten Hub addieren add the double of the stroke
10
1
HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKERtIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
KOLBENSTANGENENDENROD END
AB f9CHKKKFMNOP
142410
M10x1.25M8x1
116.55
10
12Kolbenstange Rod
162612
M12x1.25M10x1.25
138612
14
183015
M14x1.5M12x1.25
1610714
18
223419
M16x1.5M16x1.5
1811816
22
284222
M20x1.5M20x1.5
22141020
28
365030
M27x2M27x2
28181325
36
456036
M33x2M33x2
35221632
45
567246
M42x2M42x2
45282040
56
638860
M48x2M48x2
56352550
70
8510875
M64x3M64x3
70453570
90
9513395
M80x3M80x3
106653570
110
112163120
M100x3M100x3
136704590
140
Reference point
sF
*
Reference point
sl dIn 24554
*
sTAnDARD
Reference point Reference point
sT
AB f9CHKK1VD
14 24 30 10 15
M10x1.256
16 26 30 34 12 15 19
M12x1.2512
18 30 34 42 15 19 22
M14x1.512
22 34 42 50 19 22 30
M16x1.59
28 42 50 60 22 30 36
M20x1.513
36 50 60 72 30 36 46
M27x29
45 60 72 88 36 46 60
M33x210
56 72 88 108 46 60 75
M42x210
63 88 108 133 60 75 95
M48x27
85 108 133 163 75 95 120
M64x37
25
12
32 40 50 63 80 100 125 160 200KolbenBore
KolbenstangeRod
18 14 18 22 18 22 28 22 28 36 28 36 45 36 45 56 45 56 70 56 70 90 70 90 110 90 110 140
IsO 6020/2
DIn 24554
* Für das Stangenende Standard, das Kolbenstangenende mit Gelenklager ist die am besten geeignete Version CS (siehe Seite 40).* For the standard male rod end, the most suitable rod end eye with spherical bearing is the CS version (see page 40).
* Für das Stangenende SL, das Kolbenstangenende mit Gelenklager ist die am besten geeignete Version TS (siehe Seite 40).* For the SL male rod end, the most suitable rod end eye with spherical bearing is the TS version (see page 40).
Bezugspunkt
Bezugspunkt
Bezugspunkt
Bezugspunkt
BESTELLCODEORDERING CODE
11
1
HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKERtIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
BESTELLCODEORDERING CODE
BefestigungMounting
BESTELLCODE / ORDERING CODE
Spezialausführung / Special version (1) SX
MX5
ME5
ME6
MS2
MP5
MP3
MP1
MT1
MT4
MT2
MX1
MX3
MX2
MX6
Löcher mit gewinde vorne Front tapped holes
Flansch vorne Front flange
Flansch hinten Rear flange
Fussbefestigung Feet
Gelenklager Ball jointed eye
Scharnier (lasche) Male clevis
Gabelscharnier Female clevis
Schwenkzapfen vorne Front trunnions
Schwenkzapfen in der mitte Intermediate trunnions
Schwenkzapfen hinten Rear trunnions
Zugankerverlängerung vorne und hinten Extended front and rear tie-rods
Zugankerverlängerung vorne Extended front tie-rods
Zugankerverlängerung hinten Extended rear tie-rods
Löcher mit gewinde hinten Rear threaded holes
X
A
B
E
D
C
M
G
H
L
Q
R
S
T
ISO 6020/2 DIN24554
ME5
ME6
MS2
MP5
MT4
28
Kolbenstange / Possible 2nd rod
CD 50 A 500
Hub / Stroke
In mm angeben / Specify in mm
/ /
Kolbenstange / Rod
CD
DK
MD
25
32
40
50
63
80
100
125
160
200
1218 1418221822282228362836453645564556705670907090
11090
110140
Kolben / Bore
Die Felder mit Beispielwerten sind verbindlich einzutragen.The fields containing sample values are compulsory.
(1) Bei Optionen oder Spezialausführungen des Zylinders, SX angeben. Danach im entsprechenden Feld am Ende des Codes den Spezialcode (siehe Seite 12) eintragen, gefolgt von der Zeichnungsnummer, sofern vorhanden. Indicate SX when the cylinder has special options or versions. Then, indicate in the appropriate box, after the ordering code the corresponding code (see page 12) followed by the drawing’s number, if any.(2) Für Befestigung H (MT4), am Ende des Codes die Beschriftung “XV”, gefolgt vom XV Wert (siehe Seite 7-8) eintragen. For H mounting (MT4), indicate at the end of the code the letters “XV” followed by the XV quote value (see pages 7-8).
DistanzstückSpacer
SJ 50SJ 100SJ 150SJ 200
von 0 bis 1000 / from 0 to 1000von 1000 bis 1500 / from 1000 to 1500von 1500 bis 2000 / from 1500 to 2000von 2000 bis 3000 / from 2000 to 3000über 3000 / over 3000
Empfohlen für hub:Recommended for stroke:
Optionen/Spezialausführungen Special options/versions
(see seite 12/14) (see page 12/14)
Typ / Type Kolben / Bore
25... 100 CD
125... 200 DK
Magnetic 25... 125 MDMagnetic
Standard
Siehe Seite 6-8 / See pages 6-8
Kolbenstangenenden / Rod end (see seite 10 / see page 10)
SF
ST
SL
Aussengewinde Male thread
Innengewinde Female thread
Zapfen Floating joint
Aussengewinde DIN 24554 Male thread DIN 24554
(standard)
Nur für MD ZylinderOnly for Md cylinders
(see seite 15)(see page 15)
Entlüftung / Air bleedKeine entlüftung / No air bleedNur vorne / Front onlyNur hinten / Rear onlyVorne und hinten / Front and rear
SVSZSK
Dichtungen / Seals (see seite 4 / See pages 4)
Standard (mineralöl) Standard (mineral oil)Niedrige reibung / Low frictionViton® (hohe temperaturen, phosphorester) Viton® (high temperature, phosphoric esters)HFC-medium / HFC-fluid
S
L
H
G
S
Sensoren / Switch Typ / TypeREED 24-110 V. AC/DC
PNP 24 V. DCSRSH
Menge / Quantity
(2)
Einstellbare Dämpfung / Adjustable cushioning
V
Z
K
Ohne Dämpfung / Not cushioned
Nur vorne / Front only
Nur hinten / Rear only
Vorne und hinten / Front and rear
12
1
HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKERtIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
OPTIONENOPtIONS
Die Drainage der Buchse verhindert die Ablagerung von Flüssigkeit hinter dem Schaber. Ein Anschluss zwischen demSchaber und der Dichtungslippe ermöglicht die Rückführung der Flüssigkeit in den Behälter. Die Drainage befindet sich normalerweise gegenüber der Ölöffnung.
The bushing drain avoids the accumulation of liquid behind the scraper. A connection between the scraper and the lip seal allows to send the fluid back to the tank. The drain is usually installed on the opposite side of the oil port.
sD BUCHSENDRAINAGE / BuSHING dRAIN
Standardmässig sind die Ölanschlüsse auf Position 1 und die Dämpfung und Entlüftung kombiniert auf Position 3. Für Befestigung E sind die Dämpfung und Entlüftung kombiniert auf Position 2.The standard configuration has the oil ports in position 1 and the cushioning adjustment or air bleed in position 3, except for the mounting type E, where they are in position 2.
Für spezielle Anwedungen, wo eine hohe Dichtigkeit und niedrige Reibung benötigt werden, ist ein spezieller Kolben verfügbar.Bitte wenden Sie sich an unsere technische Abteilung für weitere Informationen.
For special application, where high sealing and low friction is required (i.e., closed circuit application), a special piston is available.Contact our technical department in order to verify the feasibility of this solution.
bl
SAE 3000 ANSCHLÜSSE / SAE 3000 CONNECTIONS
253240506380100125160200
KolbenBore
G 1/4”G 1/4”G 3/8”G 1/2”G 1/2”G 3/4”G 3/4”G 1”G 1”
G 1 1/4”
G 1/4”G 1/4”G 3/8”G 1/2”G 1/2”G 3/4”G 3/4”G 1”G 1”
G 1 1/4”
ISO 1179-1 (GAS) SAE 3000
–––––––
G 1 1/4”G 1 1/4”G 1 1/2”
G 3/8”G 3/8”G 1/2”G 3/4”G 3/4”G 1”G 1”
G 1 1/4”G 1 1/4”G 1 1/2”
Nur vorneFront
Nur vorneFront
–––––
3/4”3/4”1”1”
1 1/4”
–––––
3/4”3/4”1”1”
1 1/4”
StandardStandardNur hinten
RearNur hinten
RearNur vorne
FrontNur vorne
Front–––––1”1”
1 1/4”1 1/4”1 1/2”
–––––1”1”
1 1/4”1 1/4”1 1/2”
Übergrösse / OversizeÜbergrösse / OversizeNur hinten
RearNur hinten
Rear
Edelstahl-Kolbenstange / Stainless steel chromeplated rod
Vergütete-Kolbenstange / Hardened and tempered chromeplated rod
Nikrom-Kolbenstange / Nikrom rod
Gehärtete und verchromt Stange / Hardened chromeplated rod
RRx RRb RRK RRh
KOLBENSTANGESTOFFE / ROd MATERIAL
LAGE DER ANSCHLÜSSE PORT LOCATION
3
1
EE1
3
1
2
2
4
4 EE2
INTEGRIERTE PLATTEN INCORPORAtED PLAtES
13
1
INTEGRIERTE PLATTEN INCORPORAtED PLAtES HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKER
tIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
Die eingearbeiteten Platten werden verwendet um Vier-Port-Regelventile mit ISO 4410 Montagefläche zu montieren, so kann das Ventil direkt an dem Lesekopf des Zylinders angebracht werden.Dadurch wird die Ölmenge zwischen dem Ventil und dem Zylinder reduziert und eine bessere Regelgenauigkeit erreicht.Die Platten sind mit verschiedenen Ölanschlussgrössen und Befestigungsmöglichkeiten erhältlich.
The incorporated plate allows mounting a four port control valve with an ISO 4410 mounting surface. In this way, the oil volumes between the cylinder and the valve are reduced, obtaining a better control precision. They are mounted directly on the cylinder’s rear head though four screws and a nipple.They are available also in a version with conic threaded nipple, usable also for small bores or in other particular situations: for information, contact our technical department.
EINGEARBEITETE PLATTEN MIT 4 SCHRAUBEN BEFESTIGT/ INCORPORATEd PLATES: MOuNTEd wITH FOuR SCREwS
bv3-A
bv3-b
bv5-A
bv5-b
G3/8
G3/8G3/8
75 60
40
BP
T
G3/8G3/8
G3/8
T
PA
40
6075
G1/2G1/2
G1/2
50
75110
BT
P
T
PA
110 75
50
G1/2
G1/2G1/2
BESTELLUNG CODE PLATTEN / INCORPORATEd PLATES ORdERING COdE
BVDie Felder mit Beispielwerten sind verbindlich einzutragen.The fields containing sample values are compulsory.
A3 -
35 A
B
KolbendurchmesserBore range
ISO 4001-03 NG6ISO 4001-05 NG10
Anschluss A Rückseite
Anschluss B RückseitePort A rear side
Port B rear side
40 - 12550 - 200
ÖlanschlussgrösseOil port dimension
Link configurationLink configuration
14
18580807060655550
40506380100125160200
DB
DB
BL
BK
BW1
4
3
1
2
3
4
KolbenBore(mm)
DB max (mm)
NÄHERUNGSSCHALTER / PROXIMITY SwITCHES
HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKERtIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
NÄHERUNGSSCHALTERPROXIMItY SWItCHES
Näherungsschalter können die Kolbenposition erkennen, wenn der Kolben in der Nähe des Hubendes ist. Normalerweise sind die Schalter am Zylinderkopf auf Position 4 angebracht.Die Näherungsschalter funktionieren nur in den Zylindern mit Kolbendurchmesser zwischen 40 bis 200 mm und nur mit Dämpfung.Die Näherungsschalter erzeugen ein Magnetfeld und man kann dessen Veränderung durch die Nähe zur Dämpfungsbuchse messen. Proximity switches can be used to detect the piston position when it is close to stroke end. They are mounted on the cylinder head, usually in position 4 (see page 12).The proximity switches work only in cylinders with bore between 40 and 200 mm. In fact, the proximity switch generates a magnetic fieldand it is able to detect its modification due to the proximity of the cushioning bushing. The output signal is modulated by a “normally open” switch.
Arbeitstemperatur
Maximaldruck
Schutzart
Verbindung
Hysterese
Wiederholbarkeit
Verkabelung
UmschaltfunktionAusgangssignal
Bemessungsbetriebsspannung
Bemessungsbetriebsstrom
Versorgungsspannung
Working temperature
Maximum pressure
Protection grade
Connection
Hysteresis
Reapeatability
Wiring
Switching functionOutput signal
Rated operational voltage
Rated operationale current
Supply voltage
-25°C … +80°C
500 bar
IP68
S4
<= 15%
<= 5%
3 draehte / 3 wires
normalerweise geöffnet / Normally open
PNP
24 DCV
200 mA
10 … 30 DCV
TECHNISCHE EIGENSCHAFTEN SPECIFICATIONS
Vorderer Sensor / Front sensor
Hinterer Sensor / Rear sensor
Vorder und hinter Sensor / Front and rear sensor
sPv sPZ sPK
BESTELLCODES / ORdERING COdES
MAGNETSCHALTERMAGNEtIC SWItCHES
15
1
Spannung Max. Strom Schaltkreis
EinschaltzeitAusschaltzeit
Elektrische Lebensdauer Schutzart
Umgebungstemperatur Anzeigen
KabelKabellänge
VoltageMax current (a 25 °C)Electric circuitSwitching-on timeSwitching-off timeElectric lifespanProtection classTemperature rangeVisual signalCableCable length
BW = braun / brownBL = blau / blue
CB2C
BW
BL
24-110 V AC/DC0.3 AREED
0.8 ms0.1 ms
107 Impuls / pulseIP 67 EN60529
-20 +80 °CLED
2 x 0.25 mm2
5.0 m
Spannung Max. StromSchaltkreis
Einschaltzeit Ausschaltzeit
Elektrische Lebensdauer Schutzart
UmgebungstemperaturAnzeigen
KabelKabellänge
VoltageMax current (a 25 °C)Electric circuitSwitching-on timeSwitching-off timeElectric lifespanProtection classTemperature rangeVisual signalCableCable length
24 V DC0.25 APNP
0.8 ms0.1 ms
107 Impuls / pulseIP 67 EN60529
-20 +80 °CLED
3x0.25 mm2
5.0 m
CaricoLoad
BW
BK
BL
BW = braun / brown BL = blau / blueBK = schwarz / black
SR STA
Typ Type
Sensoren Switch
REED
PNP
SR
SH
BESTELLCODE FÜR SENSOREN UND HALTEKLAMMER / SwITCH + BRACkET ORdERING COdE
Halteklammer / Bracket Für Zylinderdurchmesser / For cylinder with bore
STA
STB
STC
STD
25, 32, 40
50, 63
80, 100
125
25
32
40
50
63
80
100
125
sTA
sTb
sTC
sTD
26
28
32
44
50
57
64
80
43
45
50
56
61
71
78
95
Kolben Bore X Y Halteklammer
Bracket
sR (REED)
sh (PNP)
TECHNISCHE EIGENSCHAFTEN / SPECIFICATIONS
TECHNISCHE EIGENSCHAFTEN / SPECIFICATIONS
SM3N
MAGNETSCHALTERMAGNEtIC SWItCHES HYDRAULIKZYLINDER ISO 6020/2 MIT ZUGANKER
tIE-RODS ISO 6020/2 HYDRAULIC CYLINDERS
+/~
–/~
RICHTIGE GEBRAUCH DER MAGNETISCHEN SENSORENDie Spannungs- und Stromwerte dürfen die in der Tabelle genannten Werte nicht übersteigen.Stromspitzen können durch kapazitive Lasten verursacht werden (z. B. Kabel mit einer Länge über 3 Meter).Spannungsspitzen können durch Induktion verursacht werden (z. B. Elektroventile, Relais, Schaltschütze usw.)Magnetische Distorsionen können durch Eisenmassen (z. B. Zylinderlagerung in Gussteilen)oder starke Magnetfelder (z. B. Elektromotoren, Spulen) verursacht werden. Für Hub weniger als 20 mm wenden Sie auf unsere technische Abteilung.In Gegenwart von starken Vibrationen können falsche Kontakte verursachen.
CORRECT uSE OF MAGNETIC SENSORSVoltage and current values must never exceed values specified in the table.Current surges may be caused by capacitive loads (e.g. cables of lengths over 3 metres).Voltage surges may be caused by inductance (e.g. solenoid valves, relays, contactors, etc.). Magnetic distortion may be caused by ferrous masses (e.g. cylinder seat inside moulds) or the presence of strong magnetic fields (e.g. electric motors, coils, inverter etc.).For strokes lower than 20 mm, contact our technical departmentHigh vibration can generate false contacts.
16
1
HYDRAULIKZYLINDER ISO 6020/2 MIT GEGENFLANSCHCOUNtER FLANGES ISO 6020/2 HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
hD/hK
Hydraulikzylinder mit Gegenflansch nach ISO 6020/2 Norm. Diese sind verwendbar für einen Druck bis zu 210 bar und eignen sich auch für große Hübe.Die Zylinder stehen in verschiedenen Dichtungsarten zur Verfügung, je nach Anwendung und gewünschter Leistung.Alle Zylinder werden nach der ISO 10100 Norm getestet.
Hydraulic cylinders with counterflanges, in compliance with the ISO 6020/2 standard. They can be used with pressures up to 210 bar and they are suitable for long strokes.The cylinders are available in several seal configurations, depending on application conditions and desired performances.All the cylinders are tested in compliance with the ISO 10100 standard.
Standardzylinder Standard cylinders
Kolbendurchmesser mm Bore
Arbeitsdruck bar Pressure
Max. Hub mm Max stroke
Hubtoleranz Stroke tolerance
Fluid Fluid Viskosität Viscosity
ISO 6020/2 - DIN 24554 mit Gegenflansch / with counterflanges
von 50 bis 100 from 50 to 100
Betriebsdruck 210 operating
4000 0 + 2 mm Standard ISO 8131 ISO 8131 Standard
Mineralöl Hydraulic mineral oil Phosphorsäureester Phosphoric esters Acqua glicole HFC-fluid
12... 90 mm2/S
TECHNISCHE EIGENSCHAFTEN / SPECIFICATIONS
hD hKvon 125 bis 200 from 125 to 200
0,5 m/s
1 m/s
1 m/s
0,5 m/s
- 20
- 20
- 20
- 20
+ 80
+ 80
+ 150
+ 80
DichtungscodeSeal code Hohe Festigkeit
High sealingHydrauliköl
Hydraulic oil
Phosphor-säureesterPhosphoric
esters
HFC-MediumHFC-fluid
Niedrige ReibungLow friction
Maximale Geschwindigkeit
Max speed
Temp °C
Min Max
LeistungPerformance
Fluid Fluid
S L H G
√
√
√
√
√
√
√ √
√
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
Komponenten
Abstreifer
Kolbenstangendichtung
OR Kolbendichtung
Kolbenstangendichtung
OR Zylinderrohrdichtung
Kopf-Buchsen-Abdichtung
Kolbenführung
Kolbenführung
Verschlussflansch
Führungsbuchse
Zylinderkopf vorne
Einstellbare Dämpfung + Entlüftung
VerschlussschraubeKolbenstange
Zylinderrohr
Kolben
(Kolben) Selbstsichernde Mutter
Vordere Dämpfung
Hintere Dämpfung
Zylinderkopf hinten
Komponenten
Gegenflansch
17
1
HYDRAULIKZYLINDER ISO 6020/2 MIT GEGENFLANSCHCOUNtER FLANGES ISO 6020/2 HYDRAULIC CYLINDERS
76 42 12983
211815 1819 2014
4 5
17 16
10 13
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
S L H GNute / Groove
Werkstoff / Material
ISO 7425/2
NBR + PTFE NBR + PTFE NBR + PTFE CGViton® + PTFE
NBR + PTFE NBR + PTFE NBR + PTFE CGViton® + PTFE
PU NBR + PTFE NBR + PTFE CGViton® + PTFE
Viton® + PTFE
NBR
NBR + PTFE
NBR
NBR + PTFE
NBR
NBR + PTFE CG
Viton®
NBR NBR NBRViton®
NBR + PU NBR + PTFE NBR + PTFE CGViton® + PTFE
ISO 7425/2
ISO 7425/1
Komponenten
Abstreifer
Kolbenstangendichtung
OR Kolbendichtung
Kolbenstangendichtung
OR Zylinderrohrdichtung
Kopf-Buchsen-Abdichtung
Kolbenführung
Kolbenführung
Component
Rod wiper
Rod seal
Piston seal
Rod seal
Tube seal
Head-bushing sealing
Piston seal
Piston guide PhenoplastResin
PhenoplastResin
PhenoplastResin
PhenoplastResin
Materiale / Material Spec.Componente / Component
Brüniert / Burnished
Poliert / Honed H8 - Ra 0.40 µm
Brüniert / Burnished
Cr 25 µm ISO f7 - Ra 0.20 µm
Brüniert / Burnished
Brüniert / Burnished
Brüniert / Burnished
123
4
5
6789
10111213
Bronze
Stahl
Stahl
Stahl
Stahl
Stahl
Verchromter Stahl
Stahl
StahlGehärteter Stahl
Stahl
Gehärteter Stahl
Stahl
Werkstoff
Bronze
Steel
Steel
Steel
Steel
Steel
Chromeplated steel
Steel
SteelHardened steel
SteelHardened steel
Steel
Material Kenngrössen / SpecificationsVerschlussflansch
Führungsbuchse
Zylinderkopf vorne
Einstellbare Dämpfung + Entlüftung
VerschlussschraubeKolbenstange
Zylinderrohr
Kolben
(Kolben) Selbstsichernde Mutter
Vordere Dämpfung
Hintere Dämpfung
Zylinderkopf hinten
Komponenten
Gegenflansch
Closing flangeGuide bushing
Front head
Cushioning adjusting + air bleed
Closing screwPiston rod
Cylinder body
Piston
Rod self-locking nut
Front cushioning
Rear cushioning
Rear head
Component
Counter flange
1 3 4 7 8 10
14
9
2019
2 4
18
6 12115 13
15 18 2117 16
hD
hK
14
15
16
17
18
19
20
21
18
1
HYDRAULIKZYLINDER ISO 6020/2 MIT GEGENFLANSCHCOUNtER FLANGES ISO 6020/2 HYDRAULIC CYLINDERS
LÖCHER MIT GEWINDE VORNE x ISO MX5 FRONT THREAdEd HOLES
FLANSCH VORNE A ISO ME5 FRONT FLANGE
FLANSCH HINTEN b ISO ME6 REAR FLANGE
GELENKLAGER D ISO MP5 BALL JOINTEd EYE
CD
MONTAGEMOUNtING
VD
WH
BGAA
RT
HE TG
WFTG
E
ZJ+
ØB
EEF
Y PJ+
EETOUO
FBF
Y PJ+
ØRD
*
GFWF
H
R
EZJ+
ØB
VD
JA
ZJ+ HER
Y PJ+ FB
TOUO EEØB
VD
YEE PJ+
EH
E
EXEP
XO+
LT
CX
MS
ØB
VD
3°3°
PJ+Y
H
E
EE
E
LH
US
ØSB
TSSS+
JA
ZJ+
GXS
WF
ST
GWH
COCO KC
ØB
VD
KL
KC
Der Gegenflansch steht über (Siehe KL Wert).The counterflange stick out from of the feet base (see KL dimension).
FUSSBEFESTIGUNG e ISO MS2 FEET
*Siehe die Anmerkung auf Seite 9*See note at page 9
DK
MONTAGEMOUNtING
19
1
HYDRAULIKZYLINDER ISO 6020/2 MIT GEGENFLANSCHCOUNtER FLANGES ISO 6020/2 HYDRAULIC CYLINDERS
SCHWENKZAPFEN VORNE g ISO MT1 FRONT TRuNNIONS
SCHWENKZAPFEN HINTEN l ISO MT2 REAR TRuNNIONS
LÖCHER MIT GEWINDE HINTEN T ISO MX6 REAR THREAdEd HOLES
SCHARNIER (LASCHE) C ISO MP3 MALE CLEVIS
GABELSCHARNIER M ISO MP1 FEMALE CLEVIS
DK CD
MONTAGEMOUNtING
MR
CD
L
XC+
EW
E
HE
PJ+EE Y
ØB
VD
Y PJ+
XC+
L
CD
MR
ØB
VD
EEHE
CF
CB
PJ+YG EEH
ZG+
XG
UT
TC
E ØTDØB
VD
EE PJ+Y
E ØTD
H
UT
TC XJ+
ZL+
ØB
VD
YEE
RT
PJ+
E TG
H
E
TG
AA
ZJ+
BGØB
VD
20
1
HYDRAULIKZYLINDER ISO 6020/2 MIT GEGENFLANSCHCOUNtER FLANGES ISO 6020/2 HYDRAULIC CYLINDERS
BEFESTIGUNGEN MIT ZWEIFACHER KOLBENSTANGE DOUBLE ROD MOUNtINGS
FUSSBEFESTIGUNG e FEET
FLANSCH VORNE A FRONT FLANGE
SCHWENKZAPFEN VORNE g FRONT TRuNNIONS
LÖCHER MIT GEWINDE VORNE x FRONT THREAdEd HOLES
VD
ØB1
WH
BGAA
RT
EE
HE TG
TG
E
WH+WF
ZM++
F
PJ+Y
VD
ØB2
EETOUO
FB
WF GF
H
R
E
WH+
ZM++Ø
RD*
Y PJ+
VD
ØB2
ØB1
VD
F
G
WH
HE
LHST
TSUS
ØSBWF+WF
XS
G
SS+ZM++
EE
E
Y PJ+
CO
KC
VD
ØB2
ØB1
VD
KLGWH
CO KC
ØB
VD
ØTDE
TC
UT
WH+XG
ZP++
PJ+YG
EEHKB
VD
ØB2
ØB1
VD
Der Gegenflansch steht über (Siehe KL Wert). The counterflange stick out from of the feet base (see KL dimension).
CD
CD
DK
DK
*Siehe die Anmerkung auf Seite 9*See note at page 9
ABMESSUNGENDIMENSION
21
1
HYDRAULIKZYLINDER ISO 6020/2 MIT GEGENFLANSCHCOUNtER FLANGES ISO 6020/2 HYDRAULIC CYLINDERS
ABMESSUNGENDIMENSION
AABDBGCB
CD h8CF
CO H8CXDD
E maxEEEP
EW h14EXF
FB H13GGFHJAKCKLL
LH h10LT
MR maxMS max
PJR
RD f8RT
SB H13SSSTTC
TD f8TGTOTSUOUSUTUWVDWFWHXCXGXJXOXSY
YGZGZJZLZMZP
B f9 74381830207412
25 -0.012M12x1.25
75G 1/2”
18302016144538—454.51
3237312933
62+ (*)5274
M1214
92+197625
52.3105102130127116909
4125
191+64
136+ (*)190+
5469 (*)69 (*)159+159+159+
200++200++
91481830209016
30 -0.012M12x1.25
90G 1/2”
20302216144538—454.52
3244382940
64+ (*)65
88 (**)M1218
86+268932
64.3117124145161139100134832
200+70
146+ (*)206+
6576 (*)76 (*)168+168+168+
216++216++
11758244028
11016
40 -0.012M16x1.5
115G 3/4”
24402820185245—5252
3957483450
77+ (*)83
105 (**)M1618
105+26
11440
82.7149149180186178130
95131
229+76
165+ (*)238+
6882 (*)82 (*)190+190+190+
241++241++
1376824503613016
50 -0.012M16x1.5
130G 3/4”
30503522185545—55665463585062
78+ (*)97
125 (**)M1626
102+3212750
96.9162172200216207140105735
257+71
177+ (*)261+
7991 (*)79 (*)191+203+203+
260++248++
1788830
64(*)4516420
60 -0.015M22x1.5
165G 1”38604422228758—65635782725380
117+126
150 (**)M2226
131+3216563
125.9208210250254265180105735
289+75
214+ (*)304+
798686
232+232+254+
289++289++
21910835
80(*)5620030
80 -0.015M27x2
200G 1”47705525269558—7081631019259100
130+155
170 (**)M2733
130+3820380
154.925326030031832921575732
308+75
227+ (*)337+
868686
245+245+270+
302++302++
26912540807024040
100 -0.020M30x2
245G 1 1/4”
588070253311776—92858212211678120
165+190
210 (**)M3039
172+44241100
190.230031136038140130075732
381+85
271+ (*)415+
929898
299+299+324+
356++356++
50 63 80 100 125 160 200KolbenBore
Kolbenstange
Rod 22 28 36
34 42 50
28 36 45
42 50 60
36 45 56
50 60 72
45 56 70
60 72 88
56 70 90
72 88 108
70 90 110
88 108 133
90 110 140
108 133 163
(*) Nicht gemäss ISO 6020/2. Does not comply with ISO 6020/2 standard.(**) Einheitliches RD-Maß mit Bezug auf die größere Kolbenstange als in der Norm ISO 6020/2 vorgesehen. RD dimension is unified, with reference to the higher diameter between the ones defined by ISO 6020/2 standard. Special RD dimension on request.
+ = Den Hub addieren add the stroke ++ = Den doppelten Hub addieren add the double of the stroke
22
1
HYDRAULIKZYLINDER ISO 6020/2 MIT GEGENFLANSCHCOUNtER FLANGES ISO 6020/2 HYDRAULIC CYLINDERS
KOLBENSTANGENENDENROD END
AB f9CHKKKFMNOP
Stangen Ǿ/Rod
223419
M16x1.5M16x1.5
18118
16
22
284222
M20x1.5M20x1.5
22141020
28
365030
M27x2M27x2
28181325
36
456036
M33x2M33x2
35221632
45
567246
M42x2M42x2
45282040
56
638860
M48x2M48x2
56352550
70
8510875
M64x3M64x3
70453570
90
9513395
M80x3M80x3
106653570
110
112163120
M100x3M100x3
136704590
140
Reference point
sF
*
Reference point
sl dIn 24554
* sTAnDARD
Reference point Reference point
sT
AB f9CHKK1VD
22 34 42 50 19 22 30
M16x1.59
28 42 50 60 22 30 36
M20x1.513
36 50 60 72 30 36 46
M27x29
45 60 72 88 36 46 60
M33x210
56 72 88 108 46 60 75
M42x210
63 88 108 133 60 75 95
M48x27
85 108 133 163 75 95 120
M64x37
50 63 80 100 125 160 200KolbenBore
KolbenstangeRod
22 28 36 28 36 45 36 45 56 45 56 70 56 70 90 70 90 110 90 110 140
IsO 6020/2
DIn 24554
* Für das Stangenende Standard, das Kolbenstangenende mit Gelenklager ist die am besten geeignete Version CS (siehe Seite 40).* For the standard male rod end, the most suitable rod end eye with spherical bearing is the CS version (see page 40).
* Für das Stangenende SL, das Kolbenstangenende mit Gelenklager ist die am besten geeignete Version TS (siehe Seite 40).* For the SL male rod end, the most suitable rod end eye with spherical bearing is the TS version (see page 40).
BezugspunktBezugspunkt
Bezugspunkt
Bezugspunkt
BESTELLCODEORDERING CODE
23
1
HYDRAULIKZYLINDER ISO 6020/2 MIT GEGENFLANSCHCOUNtER FLANGES ISO 6020/2 HYDRAULIC CYLINDERS
BESTELLCODEORDERING CODE
BefestigungMounting
BESTELLCODE / ORDERING CODE
Spezialausführung / Special version (1) SX
MX5
ME5
ME6
MS2
MP5
MP3
MP1
MT1
MT2
MX6
Löcher mit gewinde vorne Front tapped holes
Flansch vorne Front flange
Flansch hinten Rear flange
Fussbefestigung Feet
Gelenklager Ball jointed eye
Scharnier (lasche) Male clevis
Gabelscharnier Female clevis
Schwenkzapfen vorne Front trunnions
Schwenkzapfen hinten Rear trunnions
Löcher mit gewinde hinten Rear threaded holes
X
A
B
E
D
C
M
G
L
T
ISO 6020/2 DIN24554
ME5
ME6
MS2
MP5
28
Kolbenstange / Possible 2nd rod
HD 50 A 500
Hub / Stroke
In mm angeben / Specify in mm
/ /
Kolbenstange / Rod
HD
HK
50
63
80
100
125
160
200
2228362836453645564556705670907090
11090
110140
Kolben / Bore
Entlüftung / Air bleedKeine Entlüftung / No air bleedNur vorne / Front onlyNur hinten / Rear onlyVorne und hinten / Front and rear
Einstellbare Dämpfung / Adjustable cushioning
V
Z
K
Ohne Dämpfung / Not cushioned
Nur vorne / Front only
Nur hinten / Rear only
Vorne und hinten / Front and rear
Die Felder mit Beispielwerten sind verbindlich einzutragen.The fields containing sample values are compulsory.
DistanzstückSpacer
SJ 50SJ 100SJ 150SJ 200
von 0 bis 1000 / from 0 to 1000von 1000 bis 1500 / from 1000 to 1500von 1500 bis 2000 / from 1500 to 2000von 2000 bis 3000 / from 2000 to 3000über 3000 / over 3000
Empfohlen für Hub:Recommended for stroke:
Spezialausführung Special options/versions
(siehe Seiten 24/25) (see page 24/25)
Typ / Type Kolben / Bore
50... 100 HD
125... 200 HKStandard
Siehe Seiten 18-20 / See pages 18-20
Kolbenstangenenden / Rod end (siehe Seiten 22 / see page 22)
SF
ST
SL
Aussengewinde Male thread
Innengewinde Female thread
Zapfen Floating joint
Aussengewinde DIN 24554 Male thread DIN 24554
(standard)
Dichtungen / Seals (siehe Seiten 16 / see page 16)
Standard (Mineralöl) Standard (mineral oil)Niedrige Reibung / Low frictionViton® (hohe Temperaturen, Phosphorester) Viton® (high temperature, phosphoric esters)HFC-Medium / HFC-fluid
SVSZSK
S
L
H
G
S
(1) Bei Optionen oder Spezialausführungen des Zylinders, SX angeben. Danach im entsprechenden Feld am Ende des Codes den Spezialcode (siehe Seite 24) eintragen, gefolgt von der Zeichnungsnummer, sofern vorhanden. Indicate SX when the cylinder has special options or versions. Then, indicate in the appropriate box, after the ordering code, the corresponding code (see page 24) followed by the drawing’s number, if any.
24
Für spezielle Anwedungen, wo eine hohe Dichtigkeit und niedrige Reibung benötigt werden, ist ein spezieller Kolben verfügbar.
For special application, where high sealing and low friction is required (i.e., closed circuit application), a special piston is available.Contact our technical department in order to verify the feasibility of this solution.
bl
HYDRAULIKZYLINDER ISO 6020/2 MIT GEGENFLANSCHCOUNtER FLANGES ISO 6020/2 HYDRAULIC CYLINDERS
OPTIONEN UND NÄHERUNGSSCHALTEROPtIONS AND SPECIAL VERSIONS
M5
Die Drainage der Buchse verhindert die Ablagerung von Flüssigkeit hinter dem Schaber. Ein Anschluss zwischen dem Schaber und der Dichtungslippe ermöglicht die Rückführung der Flüssigkeit in den Behälter. Die Drainage befindet sich normalerweise gegenüber der Ölöffnung.
The bushing drain avoids the accumulation of liquid behind the scraper. A connection between the scraper and the lip seal allows to send the fluid back to the tank. The drain is usually installed on the opposite side of the oil port.
sD BUCHSENDRAINAGE / BuSHING dRAIN
Dokumentation zu den Näherungsschaltern auf Seite 14.For proximity switches features, see documentation at page 14.
8580807060655550
40506380100125160200
BL
BK
BW1
4
3
1
2
3
4
KolbenBore(mm)
DB max (mm)
NÄHERUNGSSCHALTER / PROXIMITY SwITCHES
DB
DB
Vorderer Sensor / Front sensor
Hinterer Sensor / Rear sensor
Vorder und hinter Sensor / Front and rear sensor
sPv sPZ sPK
LAGE DER ANSCHLÜSSE PORT LOCATION
1
Standardmässig sind die Ölanschlüsse auf Position 1 und die Dämpfung und Entlüftung kombiniert auf Position 3. Für Befestigung E sind die Dämpfung und Entlüftung kombiniert auf Position 2.The standard configuration has the oil ports in position 1 and the cushioning adjustment or air bleed in position 3, except for the mounting type E, where they are in position 2.
Edelstahl-Kolbenstange / Stainless steel chromeplated rod
Vergütete-Kolbenstange / Hardened and tempered chromeplated rod
Nikrom-Kolbenstange / Nikrom rod
Gehärtete und verchromt Stange / Hardened chromeplated rod
RRx RRb RRK RRh
KOLBENSTANGESTOFFE / ROd MATERIAL
50
63
80
100
125
160
200
KolbenBore
SeiteSide Standard Standard
ÜbergrösseOversize
ÜbergrösseOversize
Vorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / Rear
ISO 1179-1 (GAS) SAE 3000
G 1/2”G 1/2”G 1/2”G 1/2”G 3/4”G 3/4”G 3/4”G 3/4”G 1”G 1”G 1”G 1”
G 1 1/4”G 1 1/4”
-G 3/4”
-G 3/4”
-G 1”
-G 1”
G 1 1/4”G 1 1/4”G 1 1/4”G 1 1/4”G 1 1/2”G 1 1/2”
----
3/4”3/4”3/4”3/4”1”1”1”1”
1 1/4”1 1/4”
----1”1”1”1”
1 1/4”1 1/4”1 1/4”1 1/4”1 1/2”1 1/2”
1
3
1
2
4
4
EE1
2
EE2
3
INTEGRIERTE PLATTEN INCORPORAtED PLAtES
25
1
HYDRAULIKZYLINDER ISO 6020/2 MIT GEGENFLANSCHCOUNtER FLANGES ISO 6020/2 HYDRAULIC CYLINDERS
INTEGRIERTE PLATTEN INCORPORAtED PLAtES
EINGEARBEITETE PLATTEN MIT 4 SCHRAUBEN BEFESTIGT / INCORPORATEd PLATES: MOuNTEd wITH FOuR SCREwS
bv3-A
bv3-b
bv5-A
bv5-b
G3/8
G3/8G3/8
75 60
40
BP
T
G3/8G3/8
G3/8
T
PA
40
6075
G1/2G1/2
G1/2
50
75110
BT
P
T
PA
110 75
50
G1/2
G1/2G1/2
Die eingearbeiteten Platten werden verwendet um Vier-Port-Regelventile mit ISO 4410. Montagefläche zu montieren, so kann das Ventil direkt an dem Lesekopf des Zylinders angebracht werden.Dadurch wird die Ölmenge zwischen dem Ventil und dem Zylinder reduziert und eine bessere Regelgenauigkeit erreicht.Die Platten sind mit verschiedenen Ölanschlussgrössen und Befestigungsmöglichkeiten erhältlich.
The incorporated plate allows mounting a four port control valve with an ISO 4410 mounting surface. In this way, the oil volumes between the cylinder and the valve are reduced, obtaining a better control precision. They are mounted directly on the cylinder’s rear head though four screws and a nipple.They are available also in a version with conic threaded nipple, usable also for small bores or in other particular situations: for information, contact our technical department.
BESTELLUNG CODE PLATTEN / INCORPORATEd PLATES ORdERING COdE
BVDie Felder mit Beispielwerten sind verbindlich einzutragen.The fields containing sample values are compulsory.
A3 -
35 A
B
KolbendurchmesserBore range
ISO 4001-03 NG6ISO 4001-05 NG10
Anschluss A Rückseite
Anschluss B RückseitePort A rear side
Port B rear side
50 - 12550 - 200
ÖlanschlussgrösseOil port dimension
AnschlussLink configuration
26
Temposonic
24V DC
0-10 V
Unendlich / Endless
< ±0.02% F.S. (min ± 50 µm)
< ±0.001% F.S. (min ± 2.5 µm)
< 4 µm
100 mA
2 m/s
-20 +70 ˚C
2500
Temposonic
24V DC
4-20 mA
Unendlich / Endless
< ±0.02% F.S. (min ± 50 µm)
< ±0.001% F.S. (min ± 2.5 µm)
< 4 µm
100 mA
2 m/s
-20 +70 ˚C
2500
Temposonic
24V DC
SSI (Syncronic Serial Interface)
< ±0.01% F.S. (min ± 50 µm)
< ±0.001% F.S. (min ± 2.5 µm)
< 4 µm
100 mA
2 m/s
-20 +70 ˚C
2500
Potentiometrisch / Potentiometric
Max 60V
Unendlich / Endless
±0.1% F.S.
1 m/s
-20 +70 ˚C
500
Induktiv / Inductive
24V DC
0-10 V
±0.2% F.S.
2 m/s
-20 +70 ˚C
1000
Induktiv / Inductive
24V DC
4-20 mA
±0.2% F.S.
2 m/s
-20 +70 ˚C
1000
1
Die Servozylinder der Serie TD und TK sind mit einem elektrischen Signalwandler ausgestattet, der die genaue Position der Kolbenstange erkennt. Die Wahl des Signalwandlers hängt von den gewünschten Leistung ab.Die Genauigkeit der Positionierung wird durch 2 Elemente bestimmt: Die Auflösung des Signalwandlers und die Zylindersteuerung.Die Signalwandler sind in 3 Varianten lieferbar:• TEMPOSONIC: ermöglicht hohe Auflösungen und den Einsatz unterschiedlicher Steuerungen; es können alle Hublängen abgedeckt werden.• POTENZIOMETRISCH: Das Ausgangssignal wird von einem Kursor erzeugt, der auf einer potenziometrischen Spur läuft. Die Spannung ist proportional zur Position des Kursors. Der maximal mögliche Hub beträgt 500 mm.• INDUKTIV Liefert ein Spannungssignal, dass von einem separaten Stromkreis gene
riert wird. Der maximal mögliche Hub beträgt 1000 mm..
Version mit externen Signalwandler. Für Befestigungen X, A, E, G, L, R.Version with external transducer. For mountings X, A, E, G, H, L, R.
Version mit internem Signalwandler, für Befestigungen B,D,C,M,Q,S,T. Bitte wenden Sie sich an unsere technische Abteilung.Version with internal transducer. For mountings B, D, C, M, Q, S, T. Contact our technical department.
F.S. = Vollausschlag / full scale
Entlüftung
Für die ordnungsgemäße Funktion der Servozylinder der TD Serie ist unbedingt darauf zu achten,die Zylinder vor der Inbetriebnahme zu entlüften. Zu diesem Zweck befinden sich nicht nurEntlüftungsöffnungen an den Zylinderköpfen, sondern auch eine Entlüftungsschraube am Ende derKolbenstange, die den Austritt der Luft aus der Signalwandlerkammer ermöglicht. Dank der besonderenEinbauposition der Entlüftungsöffnung ist das Entlüften bei laufendem Betrieb möglich ohne die Kolbenstange ausbauen zu müssen.
Air bleed
To allow the servocylinders to work correctly, you need to completely exhaust the air within the cylinder when setting them up. Therefore, these cylinders not only include air bleed on the heads, but they also have an air bleed on the head of the rod for exhausting the air within the chamber of the transducer. The particular position of this air bleed allows working even when the cylinder is operative, without having to remove the rod from its housing.
The ISO 6020/2 servocylinders are available both with tie rods (TD and TK versions) and with counter flanges (TH and TX version).The servocylinders include an electronic transducer, which allows to obtain the absolute position of the rod. The type of transducer to be used depends on the performance you need. The precision of positioning is determined by 2 elements: the resolution of the transducer and the drive system of the cylinder. 3 type of transducers are available:• TEMPOSONIC: it allows high resolutions and different types of control; it supports
all the stroke lengths necessary.• POTENTIOMETRIC: the output signal is given from a cursor sliding on a piezoelectric. The maximum stroke allowed is 500 mm.• INDUCTIVE: it emits a voltage or current signal generated by a separated electrical
circuit. The maximum stroke allowed is 1000 mm.
MV MA MS PV IV IA
Signalwandler / Transducer type
Versorgungsspannung /
Supply voltage
Ausgang / Output
Auflösung / Resolution
Linearität / Linearity
Wiederholbarkeit / Repeatability
Hysterese / Hysteresis
Aufnahme / Absorption
Maximale Geschwindigkeit /
Max speed
Temperatur / Temperature
Max. Hub / Max stroke
ISO 6020/2 HYDRAULISCHE SERVOZYLINDERISO 6020/2 HYDRAULIC SERVOCYLINDERS
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
The servocylinders can be equipped with ISO interface plates, which allow to mount directly on the cylinder the following elements: - Solenoid valves ON/OFF - Proportional solenoid valves - Servovalves
This configuration, together with a CONTROL UNIT, ensures an optimal hydraulic rigidity, which drastically increments the answer time, the repeteability and the precision of the positioning.
Die Servozylinder der TD und TK Serie können mit ISO-Schnittstellen ausgestattet werden,die eine direkte Montage dieser Komponenten auf dem Zylinder ermöglichen:- Elektroventile (ein/aus)- Proportionale Elektroventile- ServoventileZusammen mit einer STEUEREINHEIT ermöglicht diese Konfiguration eine optimale hydraulischeStabilität, wodurch Reaktionszeiten, Taktung und Positionsgenauigkeit deutlich verbessertwerden.
Unendlich / Endless Unendlich / Endless
STEUEREINHEITBEZUGSPUNKT
BESTELLCODEORDERING CODE
27
1
BESTELLCODE / ORdERING COdE
56TD MA 80 A/ /Die Felder mit Beispielwerten sind verbindlich einzutragen.The fields containing sample values are compulsory.
Kolbenstange / Rod
TH
TX
TD
TK
40
50
63
80
100
125
160
200
2828362836453645564556705670907090
11090
110140
Kolben / Bore
Spezialausführung / Special version (1) SX
500
Dichtungen / Seals (siehe Seite 4 / see page 4)
L
H
G
Niedrige Reibung / Low frictionViton® (hohe Temperaturen, Phosphorester) Viton® (high temperature, phosphoric esters)
HFC-Medium / HFC-fluid
DistanzstückSpacer
SJ 50SJ 100SJ 150SJ 200
von 0 bis 1000 / from 0 to 1000von 1000 bis 1500 / from 1000 to 1500von 1500 bis 2000 / from 1500 to 2000von 2000 bis 3000 / from 2000 to 3000über 3000 / over 3000
Empfohlen für Hub:Recommended for stroke:
Hub / Stroke
In mm angeben / Specify in mm
Wenden Sie sich an unsere technische Abteilung / Contact our technical department
Spezialausführung Special options/versions
(siehe Seite 12-14) (see page 12-14)
Kolbenstangenenden / Rod end (siehe Seite 10 / see page 10)
SF
ST
SL
Aussengewinde Male thread
Innengewinde Female thread
Zapfen Floating joint
Aussengewinde DIN 24554 Male thread DIN 24554
(standard)
ISO 6020/2 HYDRAULISCHE SERVOZYLINDERISO 6020/2 HYDRAULIC SERVOCYLINDERS
BESTELLCODEORDERING CODE
Signalwandler / Transducer MV Temposonic MA MSPotentiometrisch / Potentiometric PV
Induktiv / Inductive IV IA
MVMAMSPVIVIA
L
BefestigungMounting
MX5
ME5
MS2
MT1
MT4
MT2
MX3
ME6
MP5
MP3
MP1
MX1
MX2
MX6
Löcher mit Gewinde vorne Front tapped holes
Flansch vorne Front flange
Fussbefestigung Feet
Schwenkzapfen vorne Front trunnions
Schwenkzapfen in der mitte Intermediate trunnions
Schwenkzapfen hinten Rear trunnions
Zugankerverlängerung vorne Extended front tie-rods
Flansch hinten Rear flange
Gelenklager Ball jointed eye
Scharnier (lasche) Male clevis
Gabelscharnier Female clevis
Zugankerverlängerung vorne und hinten Extended front and rear tie-rods
Zugankerverlängerung hinten Extended rear tie-rods
Rear tapped holes Rear tapped holes
X
A
E
G
H
L
R
B
D
C
M
Q
S
T
ISO 6020/2 DIN24554
ME5
MS2
MT4
ME6
MP5
(2)
siehe Seite 6-8 / See pages 6-8TD TH
√ √
√ √
√ √
√ √
√
√ √
√ √
√ √
√ √
√ √
√ √
√
√
√
TK TX
Wen
den
Sie s
ich an
uns
ere t
echn
ische
Abt
eilun
gCo
ntac
t our
tech
nica
l dep
artm
ent
40... 100 TDTKTHTX
50... 100125... 200
125... 200
Kolben / BoreTyp / Type
mit Zugankertie rods
Gegenflanschcounterflanges
Kolbenstange / Possible 2nd rod
Sfiato aria / Air bleed
SVSZSK
Keine Entlüftung / No air bleedNur vorne / Front onlyNur hinten / Rear onlyVorne und hinten / Front and rear
(1) Bei Optionen oder Spezialausführungen des Zylinders, SX angeben. Danach im entsprechenden Feld am Ende des Codes den Spezialcode (siehe Seite 36) eintragen, gefolgt von der Zeichnungsnummer, sofern vorhanden. Indicate SX when the cylinder has special options or versions. Then, indicate in the appropriate box, after the ordering code, the corresponding code (see page 12) followed by the drawing’s number, if any.
(2) Für Befestigung H (MT4), am Ende des Codes die Beschriftung “XV”, gefolgt vom XV Wert (siehe Seite 7-8) eintragen. For H mounting (MT4), indicate at the end of the code the letters “XV” followed by the XV quote value (see pages 7-8).
29
HYDRAULIKZYLINDER ISO 6022ISO 6022 HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTEN tECHNICAL CHARACtERIStICS
MONTAGE MOUNtING
2-1
SERVOZYLINDER ISO 6022ISO 6022 SERVOCYLINDERS
ZUBEHÖR FÜR HYDRAULISCHE ISO ZYLINDERACCESSORIES FOR ISO HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTEN tECHNICAL CHARACtERIStICS
TECHNISCHE EIGENSCHAFTEN tECHNICAL CHARACtERIStICS
BESTELLCODEORDERING CODE
ABMESSUNGENDIMENSION
OPTIONEN UND SPEZIALAUSFÜHRUNGENOPtIONS AND SPECIAL EXECUtIONS
BESTELLCODEORDERING CODE
2-2
3-1
2
30-31
35
36
37
38
40-41
30
2
DP
HYDRAULIKZYLINDER ISO 6022ISO 6022 HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
Hydraulikzylinder für schwere Anwendungen, nach ISO 6022 Norm.Die Zylinder sind mit verschiedenen Dichtungen verfügbar,-je nach Einsatzbedingungen und der gewünschten Leistung.Die Verwendung von Bronzeführungen für die Stange und den Kolben gewährleistet eine hohe Leistungsfähigkeit und lange Lebensdauer.Alle Zylinder werden nach ISO 10100 Norm geprüft.
Hydraulic cylinders for heavy duty applications, in compliance with the ISO 6022 standard. The cylinders are available in many mountings and with several sealing configurations.The use of bronze guides for the rod and the piston guarantees high performances and a long life.All the cylinders are tested in compliance with the ISO 10100 standard.
Standardzylinder Standard cylinders
Kolbendurchmesser mm Bore
Arbeitsdruck bar Pressure
Max. Hub mm Max stroke
Hubtoleranz Stroke tolerance
Fluid Fluid
Viskosität Viscosity
ISO 6022 - DIN 24333
Kolbendurchmesser von 50 bis 320 Bore from 50 to 320
Betriebsdruck 250 operating
6000
0 + 2 mm Standard ISO 8131 ISO 8131 Standard
Mineralöl Hydraulic mineral oil Phosphorsäureester Phosphoric esters HFC-Medium HFC-fluid
12... 90 mm2/S
Max 320 max
TECHNISCHE EIGENSCHAFTEN SPECIFICATIONS
0,5 m/s
1 m/s
1 m/s
0,5 m/s
- 20
- 20
- 20
- 20
+ 80
+ 80
+ 150
+ 80
DichtungscodeSeal code Hohe Festigkeit
High sealingHydrauliköl
Hydraulic oil
Phosphor-säureesterPhosphoric
esters
HFC-MediumHFC-fluid
Niedrige Reibung
Low friction
Maximale Geschwindigkeit
Max speed
Temp °C
Min Max
LeistungPerformance
Fluid Fluid
S L H G
√
√
√
√
√
√
√ √
√
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
31
2
DP
HYDRAULIKZYLINDER ISO 6022ISO 6022 HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
S L H GNute / Groove
Werkstoff / Material
12
13
14
15
16
17
18
ISO 7425/2
ISO 7425/2
NBR + PTFE
NBR + PTFE
NBR + PTFE
NBR + PTFE
NBR + PTFE
NBR + PTFE
NBR + PTFE CG
NBR + PTFE CG
NBR + PTFE CG
Viton® + PTFE
Viton® + PTFE
Viton® + PTFE
PU NBR + PTFE NBR + PTFE CGViton® + PTFE
NBR NBR NBRViton®
NBR + PTFE + PU NBR + PTFE NBR + PTFE CGViton® + PTFEISO 7425/1
Abstreifer
Kopf-Buchsen-Abdichtung
Kolbendichtung
Kolbenstangendichtung
OR Zylinderrohrdichtung
Kolbenstangendichtung
Kolbenführung
Rod wiper
Head-bushing sealing
Piston seals
Rod seal
Tube seal
Rod seal
Piston guide Bronze / Bronze Bronze / Bronze Bronze / BronzeBronze / Bronze
Materiale / Material Spec.Componente / Component
Bronze / Bronze
Stahl / Steel
Stahl / Steel
Stahl / SteelStahl / Steel
Poliert / Honed H8 - Ra 0.40 µmCr 25 µm ISO f7 - Ra 0.20 µmGehärteter und Verchromter Stahl / Hardened and tempered chromeplated steel
Stahl / Steel
Stahl / SteelGehärteter Stahl / Hardened steel
Gehärteter Stahl / Hardened steelStahl / Steel
123
4
5
6789
1011
Werkstoff / Material Kenngrössen / SpecificationsVerschlussflansch
Führungsbuchse
Zylinderkopf vorne
Einstellbare Dämpfung + Entlüftung
Testata posteriore
Kolbenstange
Zylinderrohr
Kolben
Vordere Dämpfung
Hintere Dämpfung
Komponenten
Komponenten
Gegenflansch
Closing flange
Guide bushingFront head
Cushioning adjusting + air bleed
Rear head
Piston rod
Cylinder body
Piston
Front cushioning
Rear cushioning
Component
Component
Counter flange
441 9 11107652 53 8
12 13 14 16 17 1615 1818
32
HYDRAULIKZYLINDER ISO 6022ISO 6022 HYDRAULIC CYLINDERS
MONTAGEMOUNtINGS
FLANSCH VORNE A ISO MF3 FRONT FLANGE
FLANSCH HINTEN b ISO MF4 REAR FLANGE
GELENKLAGER D ISO MP6 dISMANTABLE CLEVIS wITH BALL JOINTEd EYE
SCHARNIER (LASCHE) C ISO MP4 dISMANTABLE CLEVIS
BA
ZP+
PJ+YFC
FB
UC
F
KK
A
EEEE
VD
UC
F
FB
FC
VD
B
WC
Y PJ+
ZB+
BAKK
A
EEEE
4°4°
CX
BXEX
LT
Y PJ+
XO+
KK
A
EEEED
MS
XC+
L LX
CDPJ+Y
KK
A
EEEE
MRD
BWEW
2
MONTAGEMOUNtINGS
2
33
HYDRAULIKZYLINDER ISO 6022ISO 6022 HYDRAULIC CYLINDERS
MONTAGEMOUNtINGS
ERWEITERTES GELENKLAGER s ISO MP5 EXTENdEd wELdEd CLEVIS wITH BALL JOINTEd EYE
SCHARNIER (LASCHE) ERWEITERT R ISO MP3 EXTENdEd wELdEd CLEVIS
SCHWENKZAPFEN IN DER MITTE h ISO MT4 INTERMEdIATE TRuNNIONS
FUSSBEFESTIGUNG e ISO MS2 FEET
4°4°
BXEX
D EE EE
A
KK
Y PJ+CX
LTS
XC+
MS
XC+
LS
CD
EWBW
PJ+Y
KK
A
EEEED
MR
TD UV
TLTL TMBD
XV
Y PJ+
ZB+
VD
KK
A
EEEE
LH
SB
US
TSSC
SESE
SC
SS+XS
VDZB+
PJ+Y
ST
KK
A
EEEE
34
SCHWENKZAPFEN IN DER MITTE h
FLANSCH VORNE A FRONT FLANGE
INTERMEdIATE TRuNNIONS
FUSSBEFESTIGUNG e
HYDRAULIKZYLINDER ISO 6022ISO 6022 HYDRAULIC CYLINDERS
BEFESTIGUNGEN MIT ZWEIFACHER KOLBENSTANGE DOUBLE ROD MOUNtINGS
UC
F
FB
FC
VD
BA
WC
Y PJ1+
BA
VD
WC+
Y+
ZB3++
KK
A
A
KK
EEEE
Y+
ZB3++
Y PJ1+
TD UV
TLTL TMBD
XV
KK
A
A
KK
EEEE
BA
ZB3++
Y+
SCSE
SESC
SS+XS
SB
US
TS
PJ1+Y
LH
KK
A
A
KK
ST
EEEE
2
ABMESSUNGENDIMENSIONS
FEET
35
INTERMEdIATE TRuNNIONS
2
HYDRAULIKZYLINDER ISO 6022ISO 6022 HYDRAULIC CYLINDERS
ABMESSUNGENDIMENSIONS
B f8BA f8BDBWBX
CD H9CX H7D max
EWEXEEF
FBFCL
LSLTLTS
LH h10MRMSPJPJ1SBSCSESTSS
TD f8TLTMTSUCUSUVVDWCXCXOXS
XV min / maxYZBZB3ZP
63633827273232
1053232
G 1/2”25
8 x Ø 13.513240654065603838
120+120+
1115.515.532
55+3225
112135155160108
422
305+305+130
187 / 132+98
244+315++265+
757548353540401244040
G 3/4”28
8 x Ø 13.515050785078685050
136+136+13.517.517.53755+4032125155175185124
425
348+348+147.5
212 / 137+107274+350++298+
909058404050501485050
G 3/4”32
8 x Ø 17.51806395639580
61.561.5156+156+17.522.522.54255+5040150185210225148
528
395+395+170.5
245 / 155+120305+396++332+
11011073525263631756363
G 1”36
8 x Ø 222127110771107957171
172+172+
2227.527.55255+6350180220250265175
532
442+442+192.5
280 / 160+134340+440++371+
1321328860608080
2078080
G 1”40
8 x Ø 2225090
13090
1301159090
205+214+26303062
60+8063
2242702903252186
36520+520+230
340 / 180+153
396+520++430+
1451459865659090
2559090
G 1 1/4”40
8 x Ø 26300115155115155135113113
208+208+30
35.535.577
61+9070
2653253403902605
36580+580+254.5
380 / 200+181
430+570++465+
1601601088484
100100270100100
G 1 1/4”45
8 x Ø 26315112157112157145112112
235+240+33
37.537.577
79+10080
2803403604052807
40617+617+265.5
400 / 220+185
467+610++505+
200200133102102125125330125125
G 1 1/4”56
8 x Ø 33385160216160216170145145
278+280+40454587
90+1251003354054404803301045
756+756+315
450 / 260+221
550+720++596+
250250180130130160160412160160
G 1 1/2”63
8 x Ø 39475200263200263215178178
325+320+525050
112120+1601254255205406204121250
903+903+360
540 / 300+260
652+840++703+
320320220162162200200510200200
G 1 1/2”80
8 x Ø 45600250330250330260230230350+350+
626060152120+2001605306206757405101456
1080+1080+
425625 / 325+
310764+970++830+
50 63 80 100 125 140* 160 200 250 320KolbenBore
KK
A
CH
KF
A
CH
KOLBENSTANGENENDEN / ROD END sF INNENGENWINDE / FEMALE sTAnDARD
FEET
+ = Den Hub addieren / add the stroke ++ = Den doppelten Hub addieren / add the double of the stroke * = Kolbendurchmesser nicht definiert im ISO 6022 standard / bore not specified in ISO 6022 standard
A KK A KF
36 36 M27x2 M27x2 28 36 M20x1,5 M27x2
45 45 M33x2 M33x2 36 45 M27x2 M33x2
56 56 M42x2 M42x2 45 56 M33x2 M42x2
63 63 M48x2 M48x2 56 63 M42x2 M48x2
85 85 M64x3 M64x3 63 85 M48x2 M64x3
90 90 M72x3 M72x3 85 90 M64x3 M72x3
95 95 M80x3 M80x3 90 95 M72x3 M80x3
112 112 M100x3 M100x3 95 112 M80x3 M100x3
125 125 M125x4 M125x4 112 125 M100x3 M125x4
160 160 M160x4 M160x4 125 160 M125x4 M160x4
32 36 40 45 50 56 63 70 80 90 90 100 100 110 125 140 160 180 200 220KolbenstangeRod (mm)
Standard
InnenFemale
CH 28 30 34 36 43 46 52 60 65 75 75 85 85 95 110 120 140 160 180 200
36
8080706065555000
506380100125160200250320
BL
BK
BW1
4
3
1
2
3
4
KolbenBore(mm)
DB max (mm)
NÄHERUNGSSCHALTER / PROXIMITY SwITCHES
DB
DB
2
Die Buchsendrainage verhindert die Ablagerung von Flüssigkeit hinter dem Abstreifer. Ein Anschluss zwischen dem Abstreifer und der Dichtungslippe ermöglicht die Rückführung derFlüssigkeit in den Behälter. Die Drainage befindet sich normalerweise gegenüber dem Ölanschluss
The bushing drain avoids the accumulation of liquid behind the scraper. A connection between the scraper and the lip seal allows to send the fluid back to the tank. The drain is usually installed on the same side of the oil head.
3
1
3
1
HYDRAULIKZYLINDER ISO 6022ISO 6022 HYDRAULIC CYLINDERS
OPTIONEN UND NÄHERUNGSSCHALTEROPtIONS AND SPECIAL EXECUtIONS
Dokumentation zu den Näherungsschaltern auf Seite 14.For proximity switches features, see documentation at page 14.
LAGE DER ANSCHLÜSSE PORT LOCATION
sD BUCHSENDRAINAGE / BuSHING dRAIN
Vorderer Sensor / Front sensor
Hinterer Sensor / Rear sensor
Vorder und hinter Sensor / Front and rear sensor
sPv sPZ sPK
Edelstahl-Kolbenstange / Stainless steel chromeplated rod
Nikrom-Kolbenstange / Nikrom rod
Gehärtete und verchromt Stange / Hardened chromeplated rod
RRx RRK RRh
KOLBENSTANGESTOFFE / ROd MATERIAL
50
63
80
100
125
140
160
200
250
320
KolbenBore
SeiteSide Standard Standard
ÜbergrösseOversize
ÜbergrösseOversize
Vorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / RearVorne / FrontHinten / Rear
ISO 1179-1 (GAS) SAE 3000
G 1/2”G 1/2”G 3/4”G 3/4”G 3/4”G 3/4”G 1”G 1”G 1”G 1”
G 1 1/4”G 1 1/4”G 1 1/4”G 1 1/4”G 1 1/4”G 1 1/4”G 1 1/2”G 1 1/2”G 1 1/2”G 1 1/2”
G 3/4”G 3/4”G 1”G 1”G 1”G 1”
G 1 1/4”G 1 1/4”G 1 1/4”G 1 1/4”G 1 1/2”G 1 1/2”G 1 1/2”G 1 1/2”G 1 1/2”G 1 1/2”
G 2”G 2”
--
--
1/2”1/2”1/2”1/2”3/4”3/4”3/4”3/4”1”1”1”1”1”1”
1 1/4”1 1/4”1 1/4”1 1/4”
------1”1”1”1”
1 1/4”1 1/4”1 1/4”1 1/4”1 1/4”1 1/4”1 1/2”1 1/2”1 1/2”1 1/2”
EE1
EE2
Standardmassig sind die Ölanschlusse auf Position 1.In the standard configuration the oil ports are in position 1.
2
4
2
4
Die geeignetsten Kolbenstangenende mit gelenklager ist CS (see Seite 40).The most suitable rod end eye with spherical bearing is the CS version (see page 40).
BESTELLCODEORDERING CODE
37
2
BESTELLCODE / ORdERING COdE
90DP 125 A 500/ /Die Felder mit Beispielwerten sind verbindlich einzutragen.The fields containing sample values are compulsory.
Typ Type DP
Spezialausführung / Special version (1) SX
Kolbenstange / Rod
50
63
80
100
125
140 (2)
160
200
250
320
3236404550566370809090
100100110125140160180200220
Kolben / Bore
Kolbenstange / Possible 2nd rod
BefestigungMounting
MF3
MF4
MP6
MP4
MP5
MP3
MT4
MS2
Flansch vorne Front flange
Flansch hinten Rear flange
Gelenklager Dismantable clevis with ball jointed eye
Scharnier (lasche) Dismantable clevis
Erweitertes gelenklager Extended welded clevis with ball jointed eye
Scharnier (lasche) erweitert Extended welded clevis
Schwenkzapfen in der mitte Intermediate trunnions
Fussbefestigung Feet
A
B
D
C
S
R
H
E
ISO 6022
(3)
Kolbenstangenenden / Rod end (siehe Seite 35 / see page 35)
SF
Aussengewinde Male thread
Innengewinde Female thread
(standard)
Hube / Stroke
In mm angeben / Specify in mm
Einstellbare Dämpfung / Adjustable cushioning (4)
V
Z
K
Ohne Dämpfung / Not cushioned
Nur vorne / Front only
Nur hinten / Rear only
Vorne und hinten / Front and rear
DistanzstückSpacer
Wenden Sie sich an unsere technische AbteilungContact our technical department
(1) Bei Optionen oder Spezialausführungen des Zylinders, SX angeben. Danach im entsprechenden Feld am Ende des Codes den Spezialcode (siehe Seite 36) eintragen, gefolgt von der Zeichnungsnummer, sofern vorhanden. Indicate SX when the cylinder has special options or versions. Then, indicate in the appropriate box, after the ordering code, the corresponding code (see page 36) followed by the drawing’s number, if any.
(2) Nicht im ISO 6022 Standard definiert. Not included in ISO 6022 standard.
(3) Für Befestigung H (MT4), am Ende des Codes die Beschriftung “XV”, gefolgt vom XV Wert (siehe Seite 33-34) eintragen. For H mounting (MT4), indicate at the end of the code the letters “XV” followed by the XV quote value (see page 33-34).
(4) Für Kolben von 250 zu 320 gibbt es keine Dämpfung. The cushioning is not available for bore 250 and 320.
Spezialausführung Special options/versions
(siehe Seite 36) (see page 36)
HYDRAULIKZYLINDER ISO 6022ISO 6022 HYDRAULIC CYLINDERS
BESTELLCODEORDERING CODE
Dichtungen / Seals (siehe Seite 30 / see page 30)
Standard (Mineralöl) Standard (mineral oil)Niedrige Reibung / Low frictionViton® (hohe Temperaturen, Phosphorester) Viton® (high temperature, phosphoric esters)HFC-Medium / HFC-fluid
S
L
H
G
S
38
Temposonic
24V DC
0-10 V
Unendlich / Endless
< ±0.02% F.S. (min ± 50 µm)
< ±0.001% F.S. (min ± 2.5 µm)
< 4 µm
100 mA
2 m/s
-20 +70 ˚C
2500
MV
Temposonic
24V DC
4-20 mA
Unendlich / Endless
< ±0.02% F.S. (min ± 50 µm)
< ±0.001% F.S. (min ± 2.5 µm)
< 4 µm
100 mA
2 m/s
-20 +70 ˚C
2500
MA
Temposonic
24V DC
SSI (Syncronic Serial Interface)
< ±0.01% F.S. (min ± 50 µm)
< ±0.001% F.S. (min ± 2.5 µm)
< 4 µm
100 mA
2 m/s
-20 +70 ˚C
2500
MS
Signalwandler / Transducer type
Versorgungsspannung / Supply voltage
Ausgang / Output
Auflösung / Resolution
Linearität / Linearity
Wiederholbarkeit / Repeatability
Hysterese / Hysteresis
Aufnahme / Absorption
Maximale Geschwindigkeit / Max speed
Temperatur / Temperature
Max. Hub / Max stroke
Die Servozylinder der TD und TK Serie können mit ISO-Schnittstellen ausgestattet werden,die eine direkte Montage dieser Komponenten auf dem Zylinder ermöglichen:- Elektroventile (ein/aus)- Proportionale Elektroventile- ServoventileZusammen mit einer STEUEREINHEIT ermöglicht diese Konfiguration eine optimale hydraulische. Stabilität, wodurch Reaktionszeiten, Taktung und Positionsgenauigkeit deutlich verbessert werden.
TP servocylinders can be equipped with ISO interface plates, which allow to mount directly on the cylinder the following elements: - Solenoid valves ON/OFF - Proportional solenoid valves - Servovalves
This configuration, together with a CONTROL UNIT, ensures an optimal hydraulic rigidity, which drastically increments the answer time, the repeteability and the precision of the positioning.
EntlüftungFür die ordnungsgemäße Funktion der Servozylinder der TD Serie ist unbedingt darauf zu achten, die Zylinder vor der Inbetriebnahme zu entlüften. Zu diesem Zweck befinden sich nicht nur Entlüftungsöffnungen an den Zylinderköpfen, sondern auch eine Entlüftungsschraube am Ende der Kolbenstange, die den Austritt der Luft aus der Signalwandlerkammer ermöglicht. Dank der besonderen Einbauposition der Entlüftungsöffnung ist das Entlüften bei laufendem Betrieb möglich ohne die Kolbenstange ausbauen zu müssen.
Air bleed
To allow the TD servocylinders to work correctly, you need to completely exhaust the air within the cylinder when setting them up. Therefore, these cylinders not only include air bleed on the heads, but they also have an air bleed on the head of the rod for exhausting the air within the chamber of the transducer. The particular position of this air bleed allows working even when the cylinder is operative, without having to remove the rod from its housing.
Die Servozylinder der Serie TD und TK sind mit einem elektrischen Signalwandler ausgestattet, der die genaue Position der Kolbenstange erkennt. Die Wahl des Signalwandlers hängt von den gewünschten Leistung ab. Die Genauigkeit der Positionierung wird durch2 Elemente bestimmt: Die Auflösung des Signalwandlers und die Zylindersteuerung.Die Signalwandler sind in 3 Varianten lieferbar: TEMPOSONIC ermöglicht hoheAuflösungen und den Einsatz unterschiedlicher Steuerungen; es können alle Hublängenabgedeckt werden. POTENZIOMETRISCH: Das Ausgangssignal wird von einem Kursorerzeugt, der auf einer potenziometrischen Spur läuft. Die Spannung ist proportional zurPosition des Kursors. Der maximal mögliche Hub beträgt 500 mm. INDUKTIV: Liefertein Spannungssignal, das von einem separaten Stromkreis generiert wird. Der maximalmögliche Hub beträgt 1000 mm.TP servocylinders include an electronic transducer, which allows to obtain the absolute position of the rod. The type of transducer to be used depends on the performance you need. The precision of positioning is determined by 2 elements: the resolution of the transducer and the drive system of the cylinder. The standard transudec is the type TEMPOSONIC, that allows high resolutions and different types of control; it supports all the stroke lengths necessary.For Potentiometric and Induttivo type of transducer contact our technical department.
SERVOZYLINDER ISO 6022ISO 6022 HYDRAULIC SERVOCYLINDERS
TECHNISCHE EIGENSCHAFTEN tECHNICAL CHARACtERIStICS
2
STEUEREINHEIT
BEZU
GSPU
NKT
BESTELLCODEORDERING CODE
39
BefestigungMounting
BESTELLCODE / ORdERING COdE
90TP MA 125 A 500/ /Die Felder mit Beispielwerten sind verbindlich einzutragen.The fields containing sample values are compulsory.
Typ Type TP
Signalwandler / Transducer MV Temposonic MA MS
Kolbenstange / Rod
50
63
80
100
125
140 (2)
160
200
250
320
3236404550566370809090
100100110125140160180200220
Kolben / Bore
Kolbenstange / Possible 2nd rod
MF3
MT4
MS2
MF4
MP5
MP3
MP5
MP3
Flansch vorne Front flange
Schwenkzapfen in der mitte Intermediate trunnions
Fussbefestigung Feet
Flansch hinten Rear flange
Gelenklager Ball jointed eye
Scharnier (lasche) Male clevis
Erweitertes gelenklager Extended ball jointed eye
Erweitertes schanier (lasche) Male clevis extendend
A
H
E
B
D
C
S
R
ISO 6022
(3)
Kolbenstangenenden / Rod end (siehe Seite 35 / see page 35)
SF
Aussengewinde Male thread
Innengewinde Female thread
(standard)
DistanzstückSpacer
Wenden Sie sich an unsere technische AbteilungContact our technical department
Hub / Stroke
In mm angeben / Specify in mm
Einstellbare Dämpfung / Adjustable cushioning (4)
V
Z
K
Ohne Dämpfung / Not cushioned
Nur vorne / Front only
Nur hinten / Rear only
Vorne und hinten / Front and rear
Wen
den
Sie s
ich an
uns
ere
techn
ische
Abt
eilun
gCo
ntac
t our
tech
nica
l de
partm
ent
Spezialausführung / Special version (1) SX
Spezialausführung Special options/versions
(siehe Seite 36) (see page 36)
SERVOZYLINDER ISO 6022ISO 6022 HYDRAULIC SERVOCYLINDERS
BESTELLCODEORDERING CODE
Dichtungen / Seals (siehe Seite 30 / see page 30)
Niedrige Reibung / Low frictionViton® (hohe Temperaturen, Phosphorester) Viton® (high temperature, phosphoric esters)HFC-Medium / HFC-fluid
L
H
G
L
2
(1) Bei Optionen oder Spezialausführungen des Zylinders, SX angeben. Danach im entsprechenden Feld am Ende des Codes den Spezialcode (siehe Seite 36) eintragen, gefolgt von der Zeichnungsnummer, sofern vorhanden. Indicate SX when the cylinder has special options or versions. Then, indicate in the appropriate box, after the ordering code, the corresponding code (see page 36) followed by the drawing’s number, if any.
(2) Nicht im ISO 6022 Standard definiert. Not included in ISO 6022 standard.
(3) Für Befestigung H (MT4), am Ende des Codes die Beschriftung “XV”, gefolgt vom XV Wert (siehe Seite 33-34) eintragen. For H mounting (MT4), indicate at the end of the code the letters “XV” followed by the XV quote value (see page 33-34).
(4) Für Kolben von 250 zu 320 gibbt es keine Dämpfung. The cushioning is not available for bore 250 and 320.
40
CF 64316870
1608078
M64x383
19.50
CF 48212656
1407059
M48x263
10.04
CF 42211345
1206053
M42x257
6.52
CF 3329936
1005050
M33x254
4.92
CF 2727528804034
M27x239
1.90
CF 20156020603029
M20x1.532
0.92
CF 16155420603029
M16x1.532
0.88
CF 14153814402017
M14x1.519
0.25
CF 121253612321617
M12x1.2519
0.18
CF 101253210241212
M10x1.2513
0.10
Code / CodeCECKCLCMERKKLE
(Kg)
CF 803168701608078
M80x383
19.50
TS 1012515324212108
M10x1.251817
0.13
Code / CodeAXC
CHCNENEUKKLFN
(Kg)
TS 12125174248161411
M12x1.252221
0.23
TS 1415195058201613
M14x1.52825
0.39
TS 1615236268252017
M16x1.53430
0.70
TS 2015297685302219
M20x1.53836
1.22
TS 2723796
105402823
M27x24845
2.14
TS 33246
116130503530
M33x26255
3.96
TS 42257
150150604438
M42x27468
7.26
TS 48264
195185805547
M48x29878
14.60
TS 643862352401007057
M64x3122100
25.40
CS 121251732381212
10.5M12x1.25
1416
0.11
Code / CodeAXC
CHCNENEUKKLFN
(Kg)
CS 1415194044161613
M14x1.51821
0.20
CS 1615234752202017
M16x1.52225
0.36
CS 2015295865252521
M20x1.52730
0.62
CS 272377080323227
M27x23238
1.16
CS 332468997404032
M33x24147
2.16
CS 42257
108120505040
M42x25058
3.84
CS 48264
132140636352
M48x26270
7.24
CS 64386
168180808066
M64x37890
13.20
CS 72391
185195909072
M72x385
10017,50
CS 80396
21221010010085
M80x398
11028.0
CS 1003113264260125125103
M100x3120135
46.40
CS 1254126326310160160130
M125x415016581
CS 1604161418390200200167
M160x4195215174
ZUBEHÖR FÜR HYDRAULISCHE ISO ZYLINDERACCESSORIES FOR ISO HYDRAULIC CYLINDERS
Cs KOLBENSTANGENENDE MIT GELENKLAGER / ROd ENd EYE wITH SPHERICAL BEARING - ISO 6982
Ts KOLBENSTANGENENDE MIT GELENKLAGER / ROd ENd EYE wITH SPHERICAL BEARING - dIn 24555
CF GABELKOPF MIT ZAPFEN / ROd ENd CLEVIS wITH PIN - ISO 8133
3
* Geeignet für Zylinder mit Standard-Gelenkköpfe. * Suitable for cylinders with standard rod end.
* Geeignet für Zylinder mit SL Gelenkköpf (SL soll im Bestellschlüssel Zylinder angegeben werden).* Suitable for cylinders with SL rod end (“SL” must be specified in the cylinder ordering code).
41
LJ29384049637392
110142152
KC3.34.34.35.45.48.48.4
11.411.412.4
HB9
1113.515.517.52230394548
GL js134661627897
123155187255285
FO js1416182022242435353535
FM js114050556585100125150190210
CP H14304050607080100120160200
CO N910161625253636505063
CG10141620222835445570
CF H6121620253040506080
100
Code / CodeLD25LD32LD40LD50LD63LD80LD100LD125LD160LD200
LO56748098
120148190225295335
RE js13557085
100115135170200240300
SR121620253040506080
100
TA js134055587090
120145185260300
UJ7595120140160190240270320400
UK608090110135170215260340400
TH js1440506080
110125160200250
NH172121263341516181
KC3.34.34.35.45.48.48.4
11.411.4
HB9
1111
13.517.522263339
FS js148
1010121516202531
FN49596980
100120140177220
FK js1234404555657695112140
FH2530384552607585112
CR H7121620253240506380
CO N9101616252536365050
Code / CodeLK25LK32LK40LK50LK63LK80LK100LK125LK160
UL638090110150170210265325
CR
FHKC
HBCO
FN
NH
FK
UL
TH
1
FS
Für Zylinder mit D BefestigungFor cylinders with mounting D
Für Zylinder mit G, H, L Befestigung For cylinders with mounting G, H, L
ZUBEHÖR FÜR HYDRAULISCHE ISO ZYLINDERACCESSORIES FOR ISO HYDRAULIC CYLINDERS
CG
CP
GL
TA
RE UJ
UK
FM
FO CO KC
LO
LJ
CF
SR
HB
lD SCHWENKLAGERBOCK / FEMALE CLEVIS BRACkET IN ANGLE - ISO 8133 / dIn 24556
lK SCHWENKZAPFEN-LAGERBOCK / TRuNNION BRACkET - ISO 8132Paarweise geliefert.Supplied in pairs.
3
43
KOMPAKTE HYDRAULIKZYLINDER FÜR LEICHTE ANFORDERUNGENLIGHt COMPACt HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTEN tECHNICAL CHARACtERIStICS
BEFESTIGUNGEN UND ABMESSUNGENMOUNtING AND DIMENSION
BEFESTIGUNGEN UND ABMESSUNGENMOUNtING AND DIMENSION
OPTIONEN UND ZUBEHÖROPtIONS AND ACCESSORIES
BESTELLCODEORDERING CODE
MAGNETSCHALTERMAGNEtIC SWItCHES
KOMPAKTE HYDRAULIKZYLINDER FÜR SCHWERLASTANFORDERUNGENHEAVY DUtY COMPACt HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTEN tECHNICAL CHARACtERIStICS
OPTIONEN UND ZUBEHÖROPtIONS AND ACCESSORIES
BESTELLCODEORDERING CODE
4
45
46
47
48
50
51
44
4
0,5 m/s
1 m/s
1 m/s
0,5 m/s
- 20
- 20
- 20
- 20
+ 80
+ 80
+ 150
+ 80
DichtungscodeSeal code Hohe Festigkeit
High sealingHydrauliköl
Hydraulic oilPhosphorester
Phosphoric esters
HFC-MediumHFC-fluid
Niedrige Reibung
Low friction
Maximale Geschwindigkeit
Max speed
Temp °C
Min Max
LeistungPerformance
Fluid Fluid
√
√
√
√
√
√ √
√
S
L
H
G √
KOMPAKTE HYDRAULIKZYLINDER FÜR LEICHTE ANFORDERUNGENLIGHt COMPACt HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
1281 3 4 7 42 5 9 10 116
STANDARDZYLINDER STANdARd CYLINdER
1498 13
MAGNETISCHE VERSION MAGNETIC VERSION
132 6 105 2474 31 98
ZYLINDER MIT ZWEIFACHER KOLBENSTANGE dOuBLE ROd CYLINdER
Doppelt wirkende Hydraulikzylinder aus widerstandsfähigem Aluminium mit Antiverschleißbeschichtung. Geeignet für leichte, industrielle Automationsanwendungen, wenn leichte, kompakte und modulareKonstruktionsweisen erforderlich sind.
Double acting hydraulic cylinders, realized in high resistance aluminum with wear-resistant coating. Suitable for industrial automation applications, not in heavy duty conditions, when a light, compact and highly modular construction is required. Designed also for use with integrated magnetic sensors to control the piston position.
Kolbendurchmesser von 25 bis 63 von 80 bis 100Bore from 25 to 63 from 80 to 100
Maximaldruck 160 100Max pressure
Hub 20, 50, 80, 100 Stroke
TECHNISCHE EIGENSCHAFTEN SPECIFICATIONS
mm
bar
mm
Falls die Kolbengeschwindigkeit höher als 0.1 m/s ist empfehlen wir den Hub extern zu begrenzen um zu verhindern, dass der Kolben gegen den Zylinderboden stösst. Druckspitzen, zyklische Stoe und Spannungen können die Aluminium-Zylinderlebensdauer verringern. In diesen Fällen empfehlen wir, den Einsatz der RQ Zylinder aus Stahl (siehe Seite 48).
For piston speed higher than 0.1 m/s, we recommend to limit the stroke externally, avoiding that the piston hits the guide bushing or the rear cap. Pressure peaks, cyclic hits and stresses can reduce the aluminum cylinder life.In these cases, we recommend to consider using RQ cylinders in steel (see page 48).
S L H GNute / Groove
Werkstoff / Material
ISO 7425/2NBR + PTFE
NBR + PTFENBR + PTFE
NBR + PTFE
NBR + PTFENBR + PTFE
NBR + PTFE CG
NBR + PTFE CGNBR + PTFE CG
Viton® + PTFE
Viton® + PTFEViton® + PTFE
NBR
NBR + PU
NBR
NBR + PTFE
NBR
NBR + PTFE CG
Viton®
Viton® + PTFEISO 7425/1
Component
Rod wiper
Body seal
Rod seal
Piston guide
Piston seal
Piston seals
Komponenten
Abstreifer
Zylinderrohrdichtung
Kolbenstangendichtung
Kolbenführung
OR Kolbendichtung
KolbendichtungPhenoplast / Resin Phenoplast / Resin Phenoplast / ResinPhenoplast / Resin
1348910
Materiale / Material Spec.Componente / Component256711
121314
BronzeSpecial light alloy
Steel
Chromeplated steel
Steel
Steel
Stainless steel
MaterialBronze
Leichte Speziallegierung
Stahl
Verchromter Stahl
Stahl
Stahl
Edelstahl
WerkstoffGuide bushing
Rod
Cylinder body
Piston
Component
Rod nut
Rear cap
Magnet
Magnetic piston (MP)
Führungsbuchse
Kolbenstange
Zylinderrohr
Kolben
Komponenten
Kolbenstangenmutter
Zylinderboden
Magnet
Magnetischer Kolben (MP)
Maximaltemperatur ist 80°CMaximum temperature 80°C
BEFESTIGUNGEN UND ABMESSUNGENMOUNTING AND DIMENSION
45
4
KOMPAKTE HYDRAULIKZYLINDER FÜR SCHWERLAST ANFORDERUNGEN LIGHt COMPACt HYDRAULIC CYLINDERS
BEFESTIGUNGEN UND ABMESSUNGENMOUNTING AND DIMENSION
+ = Den Hub addieren / add the stroke
x ÖLANSCHLÜSSE MIT GEWINDE / THREAdEd OIL CONNECTIONS
e ÖLVERSORGUNG DURCH SEITENWAND / LATERAL OIL SuPPLY
A+C
E
Q
D B
5 Max
UU
ZZ
OR
OR
A ÖLVERSORGUNG DURCH VORDERWAND / FRONT SIdE OIL SuPPLY
ABCDE
ORQUZ
57+65455030
OR106(610)8.5
25.54
KolbenBore
25
60+75555535
OR106(610)10.5304
73+85636340
OR106(610)10.532.5
5
32 40
75+100757645
OR108(611)13407
50
85+115909055
OR108(611)13
47.57
63
100+14011011075
OR108(611)17597
80
110+17014013595
OR108(611)17707
100
A ziehen / pull B drücken / push
OR
OR
ZZ
UU
5 Max
B D
Q
E
C A+
b ÖLVERSORGUNG DURCH RÜCKWAND / REAR SIdE OIL SuPPLY
ABCDE
ORQUZ
57+65455030
OR106(610)8.5
25.54
KolbenBore
25
60+75555535
OR106(610)10.5304
73+85636340
OR106(610)10.532.5
5
32 40
75+100757645
OR108(611)13407
50
85+115909055
OR108(611)13
47.57
63
100+14011011075
OR108(611)17597
80
110+17014013595
OR108(611)17707
100
A ziehen / pull B drücken / push
ABC
CHDE
F f8GHIMNOPQRSW
57+6545155030326.514
G 1/4”17
M1032108.52
3723
KolbenstangeRod
KolbenBore
18
25
60+7555195535348
15G 1/4”
18M123412
10.53
4023
73+8563196340347
17G 1/4”23.5M143712
10.53
4330
22
32 40
22
75+10075227645428
20G 1/4”23.5M2037.515135
4530
28
50
85+11590229055507
20G 3/8”
26M2047.515135
5530
28
63
100+14011030
1107560720
G 1/2”30
M2750201756040
36
80
110+170140361359572825
G 1/2”35
M3360201757050
45
100
+ 0.1+ 0.2
ABCDMO
ORPQRSZ
57+6545501732
OR106(610)108.52
374
KolbenBore
25
60+7555551834
OR106(610)12
10.53
404
73+856363
23.537
OR106(610)12
10.53
435
32 40
75+1007576
23.537.5
OR108(611)15135
457
50
85+115909026
47.5OR108(611)
15135
557
63
100+1401101103050
OR108(611)20175607
80
110+1701401353560
OR108(611)20175707
100
+ 0.1+ 0.2
A
A
B
B
46
KOMPAKTE HYDRAULIKZYLINDER FÜR LEICHTE ANFORDERUNGENLIGHt COMPACt HYDRAULIC CYLINDERS
OPTIONEN UND ZUBEHÖROPtIONS AND ACCESSORIES
OPTIONEN UND SPEZIALAUSFÜHRUNGEN / SPECIAL OPtIONS AND VERSIONS
STANGEN-ZUBEHÖR / ROD ACCESSORIES
bU ANCHLUSS FÜR PLATTEN - VERSION “B” PLATE CONNECTIONS - VERSION “B”
5 Max
I
MM
I
As ZUSÄTZLICHE ANSCHLÜSSE AddITIONAL CONNECTIONS
IM
G 1/4”17
KolbenBore
25
G 1/4”18
G 1/4”23.5
32 40
G 1/4”23.5
50
G 3/8”26
63
G 1/2”30
80
G 1/2”35
100
AR ANTIROTATIONSSYSTEM ANTIROTATION SYSTEM
KJT
454055
KolbenBore
25
504060
554065
32 40
62.540
72.5
50
704080
63
82.540
92.5
80
97.550
107.5
100
eM AUSSENGEWINDE MALE ROd ENd
eT ZAPFEN FLOATING JOINT
ESLNUVWZ
1720
M1067
1610
TypType
KolbenBore
ET10
25
1920
M1278
1811
2225
M1488
1811
ET12
32 40
ET14
3030
M209
102214
ET20
50
3030
M209
102214
ET20
63
3640
M2712
12.52818
ET27
80
4650
M3314163522
ET33
100
BCDEILQT
65455030
G 1/4”208.516
KolbenBore
25
75555535
G 1/4”20
10.520
85636340
G 1/4”20
10.530
32 40
100757645
G 1/4” 241337
50
115909055
G 3/8”301340
63
14011011075
G 1/2”301750
80
17014013595
G 1/2”301765
100
A ziehen / pull B drücken / push
ESLNSTU
1720
M10M10x1.25
146
TypType
KolbenBore
EM10
25
1920
M12M12x1.25
167
2225
M14M14x1.5
188
EM12
32 40
EM14
3030
M20M20x1.5
289
EM20
50
3030
M20M20x1.5
289
EM20
63
3640
M27M27x2
3612
EM27
80
4650
M33M33x2
4514
EM33
100
4
BESTELLCODEORDERING CODE
tECHNICAL CHARACtERIStICS
47
4
KOMPAKTE HYDRAULIKZYLINDER FÜR LEICHTE ANFORDERUNGEN LIGHt COMPACt HYDRAULIC CYLINDERS
BESTELLCODEORDERING CODE
tECHNICAL CHARACtERIStICS
BESTELLCODE / ORdERING COdE
XMP S20 SP 2
(1) Bei Optionen oder Spezialausführungen des Zylinders, SX angeben. Danach im entsprechenden Feld am Ende des Codes die Nummer eintragen gefolgt von der Zeichnungsnummer, sofern vorhanden.
Indicate SX when the cylinder has special options or versions. Then, indicate in the appropriate box, after the ordering code, the corresponding code followed by the drawing’s number, if any.
Die Felder mit Beispielwerten sind verbindlich einzutragen.The fields containing sample values are compulsory.
Spezialausführung / Special version (1) SX
2532 40506380100
18 222228283645
Kolben / Bore
Kolbenstange / Possible 2 nd rod
Optionen und spezialausführungenSpecial options/versions
Dichtungen / Seals (siehe Seiten 44 / see page 44)
Standard Niedrige Reibung / Low frictionViton® / Viton® HFC-Medium / HFC-fluid
S LHG
DistanzstückSpacer
Distanzstücklänge(Standardhub)
Spacer length in mm(standard stroke - real stroke)
(empfohlen für Hubwege)(for intermediate strokes)
SJ ...
Standardhub / Standard stroke20 mm50 mm80 mm100 mm
205080100
2232 / /
Typ / TypeStandardMagnetic / Magnetic
RPMP
RICHTIGE GEBRAUCH DER MAGNETISCHEN SENSORENDie Spannungs- und Stromwerte dürfen die in der Tabelle genannten Werte nicht übersteigen.Stromspitzen können durch kapazitive Lasten verursacht werden (z. B. Kabel mit einer Länge über 3 Meter).Spannungsspitzen können durch Induktion verursacht werden (z. B. Elektroventile, Relais, Schaltschütze usw.)Magnetische Distorsionen können durch Eisenmassen (z. B. Zylinderlagerung in Gussteilen)oder starke Magnetfelder (z. B. Elektromotoren, Spulen) verursacht werden. Für Hub weniger als 20 mm wenden Sie auf unsere technische Abteilung. In Gegenwart von starken Vibrationen können falsche Kontakte verursachen.
CORRECT uSE OF MAGNETIC SENSORSVoltage and current values must never exceed values specified in the table.Current surges may be caused by capacitive loads (e.g. cables of lengths over 3 metres).Voltage surges may be caused by inductance (e.g. solenoid valves, relays, contactors, etc.). Magnetic distortion may be caused by ferrous masses (e.g. cylinder seat inside moulds) or the presence of strong magnetic fields (e.g. electric motors, coils, inverter etc.).For strokes lower than 20 mm, contact our technical departmentHigh vibration can generate false contacts.
Spannung
Max. Strom
Schaltkreis
Einschaltzeit
Ausschaltzeit
Elektrische Lebensdauer
Schutzart
Umgebungstemperatur
Anzeigen
Kabel
Länge
Voltage
Max current (25 °C)
Electric circuit
Switch-on time
Switch-off time
Electric lifespan
Protection class
Temperature range
Indicating
Cable
Length
TECHNISCHE EIGENSCHAFTEN / SPECIFICATIONS24 V AC/DC
0.25 A
REED
0.8 ms
0.1 ms
107 Impuls / pulse
IP 67 EN60529
-20 +80 °C
LED
3 x 0.25 mm2
5 m
BW = braun / brown BL = blau / blueBK = schwarz / black
M8
sPSCHALTER / SWItCHES
Nur für MD ZylinderOnly for MP cylinders
Menge / Quantity
XABE
ÖlanschlusslageOil feeder
Mit Gewinde / Threaded
Wand / Wall
AnschlüsseConnections
StandardVorderseite / FrontNur hinten / RearLaterale / Lateral
Kolbenstange / Rod
48
1 m/s
1 m/s
0,5 m/s
- 20
- 20
- 20
+ 80
+ 150
+ 80
DichtungscodeSeal code Hohe Festigkeit
High sealingHydrauliköl
Hydraulic oil
Phosphor-säureesterPhosphoric
esters
HFC-MediumHFC-fluid
Niedrige Reibung
Low friction
Maximale Geschwindigkeit
Max speed
Temp °C
Min Max
LeistungPerformance
Fluid Fluid
L H G
√
√
√
√ √
√√
KOMPAKTE HYDRAULIKZYLINDER FÜR SCHWERLAST ANFORDERUNGEN HEAVY DUtY COMPACt HYDRAULIC CYLINDERS
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
Doppelt wirkende Hydraulikzylinder aus Stahl für Schwerlastanforderungen.Geeignet für industrielle Automationsanwendungen, wenn robuste, kompakte undhochmodulare Konstruktionsweisen erforderlich sind. Double acting hydraulic cylinders, realized in steel for heavy duty uses. Suitable for industrial automation applications, when a strong, compact and highly modular construction is required. Available also with anti-rotation device and mechanic stroke limiters to control the final rod positions.
91 3 84 7 42 5 106
STANDARDZYLINDER STANdARd CYLINdER
652 474 831 9 23 1
ZYLINDER MIT ZWEIFACHER KOLBENSTANGE dOuBLE ROd CYLINdER
Kolbendurchmesser von 25 bis 100Bore from 25 to 100
Arbeitsdruck 250 max 320Operating pressure
Hub 20, 50, 80, 100 Stroke
TECHNISCHE EIGENSCHAFTEN SPECIFICATIONS
mm
bar
mm
Nut / GrooveWerkstoff / Material
ISO 7425/2
ISO 7425/1
Component
Rod wiper
Body seal
Rod seal
Piston guide
Piston seal
Komponenten
Abstreifer
Zylinderrohrdichtung
Kolbenstangendichtung
Kolbenführung
OR Kolbendichtung
LNBR + PTFE
NBR + PTFENBR + PTFE
NBR + PTFE
Phenoplast / Resin
GNBR + PTFE CG
NBR + PTFE CGNBR + PTFE CG
NBR + PTFE CG
Phenoplast / Resin
HViton® + PTFE
Viton® + PTFEViton® + PTFE
Viton® + PTFE
Phenoplast / Resin
13478
Materiale / Material Spec.Componente / Component256910
BronzeStahl
Stahl
Verchromter Stahl
Stahl
WerkstoffBronzeSteel
Steel
Chromeplated steel
Steel
MaterialGuide bushing
Rod
Cylinder body
Piston
Component
Rear cap
Führungsbuchse
Kolbenstange
Zylinderrohr
Kolben
Komponenten
Zylinderboden
4
BEFESTIGUNGEN UND ABMESSUNGENMOUNTING AND DIMENSION
49
4
KOMPAKTE HYDRAULIKZYLINDER FÜR SCHWERLAST ANFORDERUNGEN HEAVY DUtY COMPACt HYDRAULIC CYLINDERS
BEFESTIGUNGEN UND ABMESSUNGENMOUNTING AND DIMENSION
H+
I
O P
R
BD
Q
E
C
S
D
G
NØF
I
W
A+
M
H
M
CH
x ÖLANSCHLÜSSE MIT GEWINDE / THREAdEd OIL CONNECTIONS
ABC
CHDE
F f8GHIMNOPQRSW
57+6545155030326.514
G 1/4”17
M1032108.52
3723
KolbenstangeRod
KolbenBore
18
25
60+7555195535348
15G 1/4”
18M123412
10.53
4023
73+8563196340347
17G 1/4”23.5M143712
10.53
4330
22
32 40
22
75+10075227645428
20G 1/4”23.5M2037.515135
4530
28
50
85+11590229055507
20G 3/8”
26M2047.515135
5530
28
63
100+14011030
1107560720
G 1/2”30
M2750201756040
36
80
110+170140361359572825
G 1/2”35
M3360201757050
45
100
M
A+
D
S
R
PO
5 Max
S
C
M
Z ORZOR
B
FŰR HUBE>50FOR STROKE>50
Q
e ÖLVERSORGUNG DURCH SEITENWAND / LATERAL OIL SuPPLY
A+C
E
Q
D B
5 Max
UU
ZZ
OR
OR
A ÖLVERSORGUNG DURCH VORDERWAND / FRONT SIdE OIL SuPPLY
ABCDE
ORQUZ
57+65455030
OR106(610)8.5
25.54
KolbenBore
25
60+75555535
OR106(610)10.5304
73+85636340
OR106(610)10.532.5
5
32 40
75+100757645
OR108(611)13407
50
85+115909055
OR108(611)13
47.57
63
100+14011011075
OR108(611)17597
80
110+17014013595
OR108(611)17707
100
A ziehen / pull B drücken / push
OR
OR
ZZ
UU
5 Max
B D
Q
E
C A+
b ÖLVERSORGUNG DURCH RÜCKWAND / REAR SIdE OIL SuPPLY
A
B
ABCDE
ORQUZ
57+65455030
OR106(610)8.5
25.54
KolbenBore
25
60+75555535
OR106(610)10.5304
73+85636340
OR106(610)10.532.5
5
32 40
75+100757645
OR108(611)13407
50
85+115909055
OR108(611)13
47.57
63
100+14011011075
OR108(611)17597
80
110+17014013595
OR108(611)17707
100
A ziehen / pull B drücken / push
+ 0.1+ 0.2
ABCDMO
ORPQRSZ
57+6545501732
OR106(610)108.52
374
KolbenBore
25
60+7555551834
OR106(610)12
10.53
404
73+856363
23.537
OR106(610)12
10.53
435
32 40
75+1007576
23.537.5
OR108(611)15135
457
50
85+115909026
47.5OR108(611)
15135
557
63
100+1401101103050
OR108(611)20175607
80
110+1701401353560
OR108(611)20175707
100
+ 0.1+ 0.2
A
B
50
KOMPAKTE HYDRAULIKZYLINDER FÜR SCHWERLAST ANFORDERUNGEN HEAVY DUtY COMPACt HYDRAULIC CYLINDERS
OPTIONEN UND ZUBEHÖROPtIONS AND ACCESSORIES
OPTIONEN / SPEZIALAUSFÜHRUNGEN / SPECIAL OPtIONS - VERSIONS
STANGEN-ZUBEHÖR / ROD ACCESSORIES
TT
B D
Q
E
C
A
B
II
L
bU ANCHLUSS FÜR PLATTEN - VERSION “B” PLATE CONNECTIONS - VERSION “B”
5 Max
I
MM
I
As ZUSÄTZLICHE ANSCHLÜSSE AddITIONAL CONNECTIONS
IM
G 1/4”17
KolbenBore
25
G 1/4”18
G 1/4”23.5
32 40
G 1/4”23.5
50
G 3/8”26
63
G 1/2”30
80
G 1/2”35
100
AR ANTIROTATIONSSYTEME UND HUBBEGRENZER ANTIROTATION SYSTEM ANd STROkE LIMITERS
KJT
454055
KolbenBore
25
504060
554065
32 40
62.540
72.5
50
704080
63
82.540
92.5
80
97.550
107.5
100
eM AUSSENGEWINDE MALE ROd ENd
ESLNSTU
1720
M10M10x1.25
146
TypType
KolbenBore
EM10
25
1920
M12M12x1.25
167
2225
M14M14x1.5
188
EM12
32 40
EM14
3030
M20M20x1.5
289
EM20
50
3030
M20M20x1.5
289
EM20
63
3640
M27M27x2
3612
EM27
80
4650
M33M33x2
4514
EM33
100
eT ZAPFEN FLOATING JOINT
ESLNUVWZ
1720
M1067
1610
TypType
KolbenBore
ET10
25
1920
M1278
1811
2225
M1488
1811
ET12
32 40
ET14
3030
M209
102214
ET20
50
3030
M209
102214
ET20
63
3640
M2712
12.52818
ET27
80
4650
M3314163522
ET33
100
BCDEILQT
65455030
G 1/4”208.516
KolbenBore
25
75555535
G 1/4”20
10.520
85636340
G 1/4”20
10.530
32 40
100757645
G 1/4” 241337
50
115909055
G 3/8”301340
63
14011011075
G 1/2”301750
80
17014013595
G 1/2”301765
100
A ziehen / pull B drücken / push
4
K
J
T
ELECTRIC STROKE LIMITERS, IF ANYEVENTUELLE ELEKTRISCHE HUBBEGRENZER
BESTELLCODEORDERING CODE
tECHNICAL CHARACtERIStICS
51
KOMPAKTE HYDRAULIKZYLINDER FÜR SCHWERLAST ANFORDERUNGEN HEAVY DUtY COMPACt HYDRAULIC CYLINDERS
BESTELLCODEORDERING CODE
tECHNICAL CHARACtERIStICS
BESTELLCODE / ORdERING COdE
XRQ L20
(1) Bei Optionen oder Spezialausführungen des Zylinders, SX angeben. Danach im entsprechenden Feld am Ende des Codes die Nummer eintra gen gefolgt von der Zeichnungsnummer, sofern vorhanden.
Indicate SX when the cylinder has special options or versions. Then, indicate in the appropriate box, after the ordering code, the corresponding code followed by the drawing’s number, if any.
Die Felder mit Beispielwerten sind verbindlich einzutragen.The fields containing sample values are compulsory.
Spezialausführung / Special version (1) SX
Kolbenstange / Possible 2 nd rod
SpezialausführungSpecial options/versions
Dichtungen (siehe Seite 48 / see page 48) Niedrige Reibung / Low frictionViton® / Viton® HFC-Medium / HFC-fluid
LHG
Distanzstück Spacer
Distanzstücklänge(Standardhub)
Spacer length in mm(standard stroke - real stroke)
(empfohlen für Hubwege)(for intermediate strokes)
SJ ...
2232 / /
Kolbenstange / Rod2532 40506380100
18 222228283645
Kolben / Bore
Standardhub / Standard stroke20 mm50 mm80 mm100 mm
205080100
4
XABE
ÖlanschlusslageOil feeder
Mit Gewinde / Threaded
Wand / Wall
AnschlüsseConnections
StandardVorderseite / FrontNur hinten / RearSeitenwand / Lateral
53
DREHANTRIEBEROtARY ACtUAtORS
TECHNISCHE EIGENSCHAFTEN tECHNICAL CHARACtERIStICS
BESTELLCODEORDERING CODE
5
54-56
54
DREHANTRIEBEROtARY ACtUAtORS
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
0,5 m/s
1 m/s
1 m/s
0,5 m/s
- 20
- 20
- 20
- 20
+ 80
+ 80
+ 150
+ 80
DichtungscodeSeal code Hohe Festigkeit
High sealingHydrauliköl
Hydraulic oil
Phosphor-säureesterPhosphoric
esters
HFC-MediumHFC-fluid
Niedrige Reibung
Low friction
Maximale Geschwindigkeit
Max speed
Temp °C
Min Max
LeistungPerformance
Fluid Fluid
S L H G
√
√
√
√
√
√
√ √
√
hR
MR
Der Drehantrieb wird durch ein Zahnrad bewegt, welches wiederum durch eine Zahnstange angetrieben wird. Die Zahnstange wird dabei voneinem Hydraulikzylinder betätigt. Diese Lösung vereinfacht den Bewegungsablauf und reduziert somit die Wartungsarbeiten auf ein Minimum.Die Drehantriebe haben eine verstellbare Dämpfung und das damit erzeugte Drehmoment ist gleich dem maximalen Drehmoment des Zylinders.Eine Feineinstellung ermöglicht die Kalibrierung des Drehantriebes im Bereich von +/-5 °.Die Drehantriebe sind auch als Ausführung mit Näherungsschaltern, basierend auf Magnetkolben, erhältlich. Rotary actuators generate a torque through a cogwheel and a rack moved by a hydraulic cylinder.This solution simplifies the kinematic and the maintenance required during its life cycle.Rotary actuators have an adjustable cushioning, which can generate a cushioning torque comparable to the maximum torque of the cylinder.The stroke end adjuster allows phasing the system with a regulation range of +/-5°.They are also available in a version with magnetic piston for applications with magnetic proximity switches along the stroke of the piston.
Kolben Bore
Spezifischer Hub Specific stroke
Maximaler Betriebsdrehmoment Maximum operating torque
Arbeitsdruck Operating pressure
Maximaldruck Peak pressure
Max. Drehgeschwindigkeit Max. speed rotation
Gewicht Weight
TECHNISCHE EIGENSCHAFTEN SPECIFICATIONS
32
0.28
6
50
80
30
4.80
HR 32/32 HR 40/70 HR 63/96
40
0.61
40
100
140
14
12.5
63
0.83
120
100
140
10
43
(1)
daNm
bar
bar
rad/sec
(180°) Kg
Weitere Eigenschaften wie bei CD und MD Zylinder Other features such as CD and MD cylinders
(1) Spezifischer Hub für jeden Drehwinkel.
Zum Beispiel HR 40/70-180° Hub (0.61x180)=110. Specific stroke for every rotation angle. For example HR 40/70-180° stroke (0.61x180)=110.
5
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
55
5
32 4 5 6
11
9
8
10
12
17
DREHANTRIEBEROtARY ACtUAtORS
hR 32/32
2 3 4 5 61
10
8
9
11
12
7
hR 40/70 hR 63/96
* Lieferung auf Anfrage. Supplied on request.
* Lieferung auf Anfrage. Supplied on request.
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
Materiale / Material Spec.Componente / Component
NBR
123
4
5
6789
1011
12*
Stahl
Gehärteter Stahl
Stahl
Legierter Stahl
Stahl
Stahl
Stahl
AluminiumWerkstoff
Steel
Hardened steel
Steel
Alloy steel
Steel
Alloy steel
Steel
SteelAluminumMaterial
Zylinderrohr
Kopf
Hubbegrenzung +/-5°
Dämpfung
RackZylinderrohr
Kugellager
Zahnrad
Verschlussflansch
Schaftklemme
Rotierende Wellendichtung
Komponenten
Kolben
Body
HeadStroke adjuster +/-5°
Cushioning
RackTube
Ball bearing
Cogwheel with shaft
Closing flange
Shaft clamp
Rotating shaft seal
Component
Piston
Materiale / Material Spec.Componente / Component123
4
5
6789
1011
12*
Steel
Steel
Hardened steel
Steel
Alloy steel
Steel
Alloy steel
Steel
AluminumMaterial
Zylinderrohr
Kopf
Hubbegrenzung +/-5°
Dämpfung
RackZylinderrohr
Kugellager
Zahnrad
Verschlussflansch
Nutwelle
Rotierende Wellendichtung
Komponenten
Kolben
Body
HeadStroke adjuster +/-5°
Cushioning
RackTube
Ball bearing
Cogwheel
Closing flange
Grooved shaft
Rotating shaft seal
Component
Piston
Stahl
Stahl
Gehärteter Stahl
Stahl
Legierter Stahl
Stahl
Legierter Stahl
Stahl
AluminiumWerkstoff
NBR
56
M5 (DR)
13
65
88
M10
3
46
68
108
54
58 1642 45
Ø70
h8
Ø22
G 1/4 G 1/4
A
82
M8
28.2
545
36 36
300
P
DIN
5482
-A40
x36
Z20
58
10
4
G 1/8 (DR)A47 4760
3/8" GAS
60
3/8" GAS10.5
120
40
90
128
M10
4968
Ø 4
2 H
8
5
78 5.15.1
Ø10
0
160
100
DIN
5482
-A58
x53
Z27
300
P
G 1/4 (DR)
1780A52
G 1/2" G 1/2"
52
90
Ø13
8 230
5.1125
Ø60
H8
5
165
9072
180
60
5.1
M16
130
90
4
130
16
Der Überlauf muss mit dem Tank verbunden sein. It’s compulsory to link the drain (DR) to the tank.
222
368
462
272
478
610
322
587
760
90 180 270
HR 32/32
HR 40/70
HR 63/96
Typ / Type
Drehwinkel / rotation angleA
DREHANTRIEBEROtARY ACtUAtORS
TECHNISCHE EIGENSCHAFTENtECHNICAL CHARACtERIStICS
hR 32/32
hR 40/70
hR 63/96
5
BESTELLCODEORDERING CODE
tECHNICAL CHARACtERIStICS
57
BESTELLCODE FÜR NUTWELLE ORdERING COdE FOR GROOVEd SHAFT
Bestellcode für Nutwelle HR 40 Grooved shaft for HR 40Bestellcode für Nutwelle HR 63 Grooved shaft for HR 63
Z 20
Z 27
Länge = 300 mm Lenght = 300 mm
HR KR40Die Felder mit Beispielwerten sind verbindlich einzutragen.The fields containing sample values are compulsory.
180
BESTELLCODE / ORdERING COdE
Standard90 180270
Drehwinkel / Rotation angle
Andere Winkel auf Anfrage - Wenden Sie sich an unsere technische Abteilung. Other angle on demand - Contact our technical department
70/ -
Typ / TypeStandardMagnetic / Magnetic
HRMR
RitzeldurchmesserPinion Bore
32 4063
///
32 7096
KolbenBore
Dämpfung + Hubbegrenzung Cushioning + Stroke adjusterKR
Dichtungen / Seals (siehe Seiten 54 / see page 54)
Standard Niedrige Reibung / Low frictionViton® / Viton® HFC-Medium / HFC-fluid
SLHG
S
DREHANTRIEBEROtARY ACtUAtORS
BESTELLCODEORDERING CODE
tECHNICAL CHARACtERIStICS
5
Nur für MR VersionOnly for MR version
(siehe Seiten 15) (see page 15)
Sensoren / Switch Typ / TypeREED 24-110 V. AC/DC
PNP 24 V. DCSR
SH
Menge / Quantity
SH Sensoren für die MR32/32-90 nicht verfügbar sindSH switches are not available on MR32/32-90
59
TECHNISCHE TABELLENtECHNICAL tABLES
6
60
LI (m
m)
Last (daN) / Load (daN)
LI = FC x CO
LI = Ideallänge / ideal lenght (mm)FC = Hubfaktor / stroke factorCO = Hub / stroke (mm)
HUBFAKTOR “FC” STROkE “FC” FACTOR
DIAGRAM ZUR KOLBENSTANGENWAHL / ROd SELECTION CHART
HYDRAULIKZYLINDER ISO 6020/2 ISO 6020/2 HYDRAULIC CYLINDERS
TECHNISCHE TABELLENtECHNICAL tABLES
KNICKÜBERPRÜFUNG / BuCkLING VERIFICATION
Die Knickprüfung muss unter Rücksichtnahme von Hub und der Befestigungsart erfolgen.Um die ideale Länge LI zu ermitteln muss der Hub CO mit dem Hubfaktor FC, in Abhängigkeit mit der Befestigung, multipliziert werden: LI=FC*CO.Das Diagramm zeigt die Beziehung zwischen idealer Länge, Stangendurchmesser und maximaler Belastung.
When the cylinder is pushing, the rod must be not subject to buckling instability.The buckling verification must be done considering the stroke and the mounting of the cylinder.It must be calculated the ideal length LI through the multiplication of the stroke CO with the stroke factor FC,depending from the mounting and determined as shown in table.LI = FC x COThe diagram show the relationship between ideal length, rod diameter and maximum load.
6
DÄMPFUNGSEINSTELLUNG / CuSHIONING AdJuSTMENT
Zylinder mit Dämpfung haben eine Schraube zur Dämpfungseinstellunng.Dieses Schraube hat eine Seal-Lock ® Dichtmutter, die sorgfältig nach der Dämpfungseinstellung gesperrt werden muss.Die Dämpfungverstelleinrichtung kann auch als Entlüftung verwendet werden.
Cylinders with cushioning have a device with screw for cushioning adjustment.This device has a Seal-Lock® sealing nut, that must be carefully locked after cushioning adjustment.The cushioning adjustment device can be used as air bleeder, too.
TECHNISCHE TABELLENtECHNICAL tABLES
61
2011
3142
4988
8042
12566
19635
32170
50265
2639
4123
6546
10556
16493
25771
42223
65973
1287 1689
785 1031604378
1040880679
160314021025253321561513400233592443641454984102
1002286266409
15694134779456
260122199116965400873506025635
793496
13661155891
210518411346332528301986525344093206841872165383
13153113218412
205991768912411341412986322266526144601633646
KolbenBore
KolbenstangeRod
drückenpush
Kraft bei 160 barForce at 160 bar
CD - DK - MD HD - HK
Kraft bei 210 barForce at 210 bar
drückenpush
ziehenpull
ziehenpullS1 S2 S3 SF LF
mm mm cm² cm² cm² cm² mm daN daN daN daN
10
25
10
25
15
25
20
25
30
25
35
25
45
25
60
25
70
25
80
25
25KolbenBore
Minimumhub mmMinimum stroke
Befestigung H (ISO MT4)Mounting H (ISO MT4)
Zylinder MDMD cylinders
32 40 50 63 80 100 125 160 200
HYDRAULIKZYLINDER ISO 6020/2 ISO 6020/2 HYDRAULIC CYLINDERS
TECHNISCHE TABELLENtECHNICAL tABLES
ABMESSUNGEN UND KRAFT / dIMENSION ANd FORCE
MINIMUMHUB / MINIMuM STROkE
5 9 20 70 70 160 160 460 820 1150
25KolbenBore
Anzugsmoment für zuganker (Nm)Tie rods tightening torque
32 40 50 63 80 100 125 160 200
ANZUGSMOMENT FÜR ZUGANKER / TIE ROdS TIGHTENING TORQuE
S1: Kolbenfläche / pushing sectionS2: Kolbenstangenfläche / rod sectionS3: Ringfläche / pulling sectionSF: Dämpfungsfläche / cushioning sectionLF: Dämpfungslänge / cushioning lenght
Nehmen Sie 250 bar für die Dämpfungseigenschaften anTo verify the cushioning capability, consider a maximum pressare of 250 bar
6
25
32
40
50
63
80
100
125
160
200
12,6
19,6
31,2
50,3
78,5
123
201
314
5,5
8,3
13,8
23,8
38
56
99
151
23
21
21
28
28
26
30
44
8,0 3,5 14
4,9 1,8 121218141822182228222836283645364556455670567090709011090110140
1,12,51,52,53,82,53,86,23,86,210,26,210,215,910,215,924,615,924,638,52538643864956495154
3,82,46,55,54,210,08,86,415,813,59,525,021,015,340,134,425,662,653,940,1988459163137106251219160
62
HUBFAKTOR “FC” STROkE “FC” FACTOR
DIAGRAM ZUR KOLBENSTANGENWAHL / ROd SELECTION CHART
LI (m
m)
Last (kN) / Load (kN)
LI = FC x COLI = Ideallänge / ideal lenght (mm)FC = Hubfaktor / stroke factorCO = Hub / stroke (mm)
HYDRAULIKZYLINDER ISO 6022ISO 6022 HYDRAULIC CYLINDERS
TECHNISCHE TABELLENtECHNICAL tABLES
Die Knickprüfung muss unter Rücksichtnahme von Hub und der Befestigungsart erfolgen.Um die ideale Länge LI zu ermitteln muss der Hub CO mit dem Hubfaktor FC, in Abhängigkeit mit der Befestigung, multipliziert werden: LI=FC*CO.Das Diagramm zeigt die Beziehung zwischen idealer Länge, Stangendurchmesser und maximaler Belastung.
When the cylinder is pushing, the rod must be not subject to buckling instability.The buckling verification must be done considering the stroke and the mounting of the cylinder.It must be calculated the ideal length LI through the multiplication of the stroke CO with the stroke factor FC,depending from the mounting and determined as shown in table.LI = FC x COThe diagram show the relationship between ideal length, rod diameter and maximum load.
KNICKÜBERPRÜFUNG / BuCkLING VERIFICATION
6
DÄMPFUNGSEINSTELLUNG / CuSHIONING AdJuSTMENT
Zylinder mit Dämpfung haben eine Schraube zur Dämpfungseinstellunng.Dieses Schraube hat eine Seal-Lock ® Dichtmutter, die sorgfältig nach der Dämpfungseinstellung gesperrt werden muss.Die Dämpfungverstelleinrichtung kann auch als Entlüftung verwendet werden.
Cylinders with cushioning have a device with screw for cushioning adjustment.This device has a Seal-Lock® sealing nut, that must be carefully locked after cushioning adjustment.The cushioning adjustment device can be used as air bleeder, too.
TECHNISCHE TABELLENtECHNICAL tABLES
63
50
63
80
100
125
140
160
200
250
320
19,6
31,2
50,3
78,5
123
154
210
314
491
804
8,2
13,8
23,8
37,8
56
67
99
151
222
388
49
78
126
196
307
385
503
785
1227
2011
32
32
40
40
40
46
46
65
60
60
3236404550566370809090100100110125140160180200220
8,010,212,615,519,624,631,238,5506464797995123154201254314380
11,69,518,615,330,625,647,440,172599075123106191160290236490424
292447387764
118100181148226188306265478401725591
12251060
KolbenBore
KolbenstangeRod
drückenpush
Kraft bei 250 barForce at 250 bar
DP
ziehenpullS1 S2 S3 SF LF
mm mm cm² cm² cm² cm² mm kN kN
ABMESSUNGEN UND KRAFT / dIMENSION ANd FORCE
HYDRAULIKZYLINDER ISO 6022 ISO 6022 HYDRAULIC CYLINDERS
TECHNISCHE TABELLENtECHNICAL tABLES
6
S1: Kolbenfläche / pushing sectionS2: Kolbenstangenfläche / rod sectionS3: Ringfläche / pulling sectionSF: Dämpfungsfläche / cushioning sectionLF: Dämpfungslänge / cushioning lenght
Nehmen Sie 350 bar für die Dämpfungseigenschaften an 350 barTo verify the cushioning capability, consider a maximum pressare of 350 bar