Special Report – Heavy Duty Gas Springs and Gas Hydraulic Systems
HYDRAULIC - Special-Maskiner
22
HYDRAULIC 1 HYDRAULIC Professional heavy duty mulchers with hydraulic drive Constructed using the most advanced hydraulic components, the HYDRAULIC product range machines can be coupled to excavators, tractor loaders and skid steer loaders (wheeled or tracked). The professional heavy duty mulchers of this product range are ideal for application in the field of environmental maintenance, for clearing brambles, bush, branches and treetrunks along river banks and channels, slopes, railway lines and for land clearing purposes. High-tensile steel and special technical solutions make them suitable to easily bear the stress produced by the movements of the mechanical arms and the strong axial loads resulting from the quick rotation of the equipment on which they are installed. Most of the models are available with rotors having free swinging hammers or fixed teeth.
Transcript of HYDRAULIC - Special-Maskiner
HYDRAULIC 1
HYDRAULIC
Professional heavy duty mulcherswith hydraulic driveConstructed using the most advanced hydraulic components, the HYDRAULIC product range machines can be coupled to excavators, tractor loaders and skid steer loaders (wheeled or tracked).The professional heavy duty mulchers of this product range are ideal for application in the field of environmental maintenance, for clearing brambles, bush, branches and treetrunks along river banks and channels, slopes, railway lines and for land clearing purposes. High-tensile steel and special technical solutions make them suitable to easily bear the stress produced by the movements of the mechanical arms and the strong axial loads resulting from the quick rotation of the equipment on which they are installed.Most of the models are available with rotors having free swinging hammers or fixed teeth.
HYDRAULIC 2
The importance to details
The FAE machines are designed and manufactured so as to ensure the highest operability over the years. Only an extreme attention to each construction detail, the use of high quality materials and technologically advanced components enable to attain the exceptional performance standards which characterize the machines with the FAE trademark.
The guarantee of the original
In order to maintain these performances and attain the highest efficiency after years of use, FAE advises you to use its own original spare parts exclusively, supplied on request. In fact, the quality of the results is due to the special design of the patented tools and the availability of inserts in hard metal that boost the resistance to wear and tear. The replacement of the parts, both of fixed teeth and free swinging hammers is done very quickly and is extremely easy.
Only if you address to the FAE Service can you be certain of the FAE original quality and warranty.
HYDRAULIC 3
UML/SSLUML/SSL/VTMulcher with fixed teeth rotor for skid steer loaders between 75 and 120 HP, equipped with ahigh flow kit.
UML/SSL
Data refers to the machine without options.
Standard equipment: 63 cc hydraulic piston motor, double relief valve with anticavitation and brake function, hydraulic hood, adjustable skids, working pressure control gauge, hydraulic hoses, push frame. For the UML/SSL/VT 110/60cc variabledisplacement hydraulic motor.Options: diverter valve, oil cooler kit, possibility to have the rotor equipped with tooth type “C/3/HD” or blade C/3.
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Workingwidth mm
Overallwidth mm
Weight Kg
Grinding diametermm (max)
Teethq.ty/type
C/3+C/3/SS
UML/SSL 125 75 - 120 130 - 150 200 - 350 1340 1640 1140 200 26+2
UML/SSL 150 75 - 120 130 - 150 200 - 350 1580 1880 1240 200 32+2
UML/SSL 175 85 - 120 130 - 150 230 - 350 1820 2120 1330 200 36+2
UML/SSL/VT Hydraulic motor with variable torque
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Workingwidth mm
Overallwidth mm
Weight Kg
Grinding diametermm (max)
Teethq.ty/type
C/3+C/3/SS
UML/SSL/VT 125 75 - 120 130 - 200 200 - 350 1340 1640 1100 200 26+2
UML/SSL/VT 150 75 - 120 130 - 200 200 - 350 1580 1880 1250 200 32+2
UML/SSL/VT 175 75 - 120 130 - 200 200 - 350 1820 2120 1340 200 36+2
Tooth type C/3 (standard) Tooth type C/3/SS (side scraper)Tooth type C/3/HD (option) Tooth blade type C/3 (option)
HYDRAULIC 4
Blade E
DML/SSLMulcher with fixed teeth for skid steer loaders between 40 and 90 HP.
DML/SSL
Data refers to the machine without options.
Standard equipment: variable displacement hydraulic motor (17-34 cc) with anticavitation valve, “double steel cage system” machine shell, belts transmission, oversized rotor bearings, double counter blade in HARDOX®, hydraulic cylinder to open and close the hood, diverter valve “Plug in and Play”, rotor with tools type E.Options: variable displacement hydraulic piston motor (32-65 cc).
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Workingwidth mm
Overallwidth mm
Weight Kg
Grinding diametermm (max)
Teeth q.ty/Type E
DML/SSL 125 40 - 90 50 - 130 180 - 250 1240 1520 685 120 30
DML/SSL 150 40 - 90 50 - 130 180 - 250 1480 1760 745 120 36
HYDRAULIC 5
FML/SSLMulcher withswinging hammers rotor for skid steer loaders between 75 and 120 HP equipped with a high flow kit.
FML/SSL
Hammer type FMM
Data refers to the machine without options.
Standard equipment: 63 cc hydraulic piston motor with double relief valve with anticavitation and brake function, hydraulic hood, adjustable skids, working pressure control gauge, hydraulic hoses, pushing frame.Options: diverter valve, oil cooler kit.
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Workingwidth mm
Overallwidth mm
Weight Kg
Grinding diametermm (max)
Hammersq.ty/type
FMM
FML/SSL 125 75 - 110 125 - 150 200 - 350 1340 1640 1160 200 20
FML/SSL 150 75 - 110 125 - 150 200 - 350 1580 1880 1260 200 24
FML/SSL 175 85 - 120 125 - 150 230 - 350 1820 2120 1350 200 28
HYDRAULIC 6
PMM/SSLBrush mulcher for skidsteer loaders between60 and 130 HP.
PMM/SSL
Data refers to the machine without options.
Standard equipment: hydraulic gear type motor (from 32 to 65 cc), double relief valve with anticavitation and brake function and variable displacement for high and low flow usage, skid steer loader type quick attachment plate with self levelling device, self cleaning rear roller with integrated skids, anti-projection flaps, adjustable rear hood, Hardox steel counter blades, hydraulic hoses. possibility to have the rotor equipped with heavy duty hammers or with “Y” flails. Options: oversized roller supports for heavy duty application.
Hammer type PMM Flail type “Y”
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Workingwidth mm
Overallwidth mm
Weight Kg
Grinding diametermm (max)
Teeth q.tyhammers
PMM
flails
Y
PMM/SSL 150 60 - 130 60 - 130 180 - 250 1540 1760 790 80 18 18
PMM/SSL 175 65 - 130 60 - 130 180 - 250 1780 2000 850 80 22 22
PMM/SSL 200 70 - 130 60 - 130 180 - 250 2020 2180 910 80 24 24
HYDRAULIC 7
Data refers to the machine without options.
STC/SSLStone crushers with a max working depth and grinding diameter of 15 cm for skid steer loaders between 80 and 120 HP equipped witha high flow kit.
STC/SSL
Standard equipment: 125 cc hydraulic piston motor with double relief valve and anticavitation and brake function, adjustable hardox-counterblade, inner hydraulic dozing hood with adjustable cylinder for better output material regulation, soil penetration skids, working pressure control gauge, hydraulic hoses. Options: diverter valve.
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Workingwidth mm
Overallwidth mm
Weight Kg
Grinding diametermm (max)
Working Teeth q.tydepth
mm (max)type
STCL + CSS
STC/SSL 125 80 - 120 130 - 150 220 - 350 1350 1650 1090 150 150 24 + 4
STC/SSL 150 90 - 120 130 - 150 220 - 350 1590 1890 1210 150 150 30 + 4
Tooth type STCL Tooth type C/SS (side scraper)
HYDRAULIC 8
PML/HYMulcher with swinging ham-mers rotor for excavators having a weight between1.5 and 3.5 t.
PML/HY
Data refers to the machine without options.
Standard equipment: 8cc gear motors with integrated anticavitation valve, self-cleaning rear roller, self levelling protection rubber, possibility to have the rotor equipped with PML hammers or Y-flails.Options: 16cc gear motors with integrated anticavitation valve, custom made attachment plate with pins, attachment plate with self leveling device.
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Exca.weightBagger t
Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Teeth q.tyhammers
PML
flails
Y
PML/HY 50 20 - 35 16 - 40 150 - 210 1,5 - 3,5 500 160 20 8 8
PML/HY 70 25 - 35 16 - 40 150 - 210 2,0 - 3,5 700 180 20 10 10
PML/HY 90 30 - 35 16 - 40 150 - 210 2,5 - 3,5 900 200 20 14 14
Hammer type “PML” Hammer type “Y”
PMM/HYMulcher with swinging hammers rotor for excavators having a weight between3.5 and 5.5 t.
Standard equipment: 16cc gear motor with integrated anticavitation valve, flow control system valve, self-cleaning rear roller, possibility to have the rotor equipped with PML hammers or Y-flails.Options: 27cc gear motor made of cast with integrated anticavitation valve, hydraulic motor with variable torque (17-34 cc), custom made attachment plate with pins, attachment plate with self levelling device.
PMM/HY
Data refers to the machine without options.
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Exca.weightBagger t
Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Teeth q.tyhammers
PML
flails
Y
PMM/HY 100 25 - 45 35 - 75 150 - 210 3,5 - 5,5 1015 240 40 16 16
PMM/HY 125 30 - 45 35 - 75 150 - 210 4,0 - 5,5 1255 265 40 20 20
PMM/HY 150 35 - 45 35 - 75 150 - 210 4,5 - 5,5 1495 290 40 24 24
HYDRAULIC 9
Hammer type “PML” Hammer type “Y”
HYDRAULIC 10
PML/EXMulcher with swinging hammers rotor for excavators having a weight between5.5 and 7.5 t.
Standard equipment: 27cc gear motor made of cast with integrated anticavitation valve, flow control system valve, adjustable rear hood, adjustable and self-cleaning rear roller, possibility to have the rotor equipped with PML hammers or Y-flails.Options: 38cc gear motor made of cast with integrated anticavitation valve, hydraulic motor with variable torque (17-34 cc), custom made attachment plate with pins, attachment plate with self levelling device.
PML/EX
Data refers to the machine without options.
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Exca.weightBagger t
Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Teeth q.tyhammers
PML
flails
Y
PML/EX 100 30 - 50 35 - 85 180 - 210 5,5 - 7,5 1015 290 50 16 16
PML/EX 125 35 - 50 35 - 85 180 - 210 6,0 - 7,5 1255 320 50 20 20
PML/EX 150 40 - 50 35 - 85 180 - 210 6,5 - 7,5 1495 350 50 24 24
Hammer type “PML” Hammer type “Y”
HYDRAULIC 11
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavatorsweight t.
Min - Max
Workingwidth mm
Weight Kg
Grindingdiametermm (max)
Teeth q.tyhammers
PMM
flails
Y
PMM/EX 100 50 - 100 60 - 130 180 - 250 6 - 13 1060 520 80 12 12
PMM/EX 125 50 - 100 60 - 130 180 - 250 6 - 13 1300 600 80 16 16
PMM/EX 150 50 - 100 60 - 130 180 - 250 6 - 13 1540 680 80 18 18
PMM/EX 175 50 - 100 60 - 130 180 - 250 7 - 13 1780 760 80 22 22
PMM/EXMulcher with swinginghammers rotor forexcavators having a weight between 6 and 13 t.
Standard equipment: variable displacement hydraulic piston motor from 32 to 65 cc with double relief valve and anticavitation and brake function, flow control system valve, protection hood, and adjustable skids.Options: custom made attachment plate with pins, attachment plate with self levelling device, stronger bearing for the back roller, possibility to have the rotor equipped with heavy duty hammers or with “Y” flails.
Hammer type PMM Flail type “Y”
PMM/EX
Data refers to the machine without options.
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Hammersq.ty/type
C/3+C/3/SS
UML/HY/RW 100 80 - 100 110 - 150 220 - 250 1100 550 120 20 + 2
UML/HY/RW 125 80 - 100 110 - 150 220 - 250 1340 590 120 26 + 2
UML/HY/RW 150 80 - 100 110 - 150 220 - 250 1580 630 120 32 + 2
UML/HY/RWMulcher with fixed teeth rotor for special carriers.
Standard equipment: hydraulic piston motor 63 cc with relief and anticavitation valve, hydraulic hood.Options: custom made attachment plate with pins, diverter valve, possibility to have the rotor equipped with tooth type “C/3/HD” or blade type C/3.
UML/HY/RW
Data refers to the machine without options.
HYDRAULIC 12
Tooth type C/3 (standard) Tooth type C/3/SS (side scraper)Tooth type C/3/HD (option) Tooth blade type C/3 (option)
NEW
DML/HYMulcher with fixed teeth for excavators having a weight between 5 and 13 t.
Standard equipment: variable displacement hydraulic piston motor (17-34 cc) with relief and anticavitation valve, flow control system valve, double protection hood with mechanical adjustment, rotor with tools type E.Options: custom made attachment plate with pins, variable displacement hydraulic piston motor (32-65cc), hydraulic cylinders for the front and rear protection hood, diverter valve kit “Plug and Play”.
DML/HY
Blade E
Data refers to the machine without options.
HYDRAULIC 13
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavatorsweight t.
Min - Max
Workingwidth mm
Weight Kg
Grindingdiametermm (max)
Tooth q.tyBlade E
DML/HY 100 50 - 100 50 - 130 180 - 250 5 - 13 1000 490 120 24
DML/HY 125 50 - 100 50 - 130 180 - 250 5 - 13 1240 510 120 30
HYDRAULIC 14
UML/HYUML/HY/VTMulcher with fixed teeth rotor for excavators having a weight between 7 and 14 t.
UML/HY/VT Hydraulic motor with variable torque
The data data to the machine without options.
Standard equipment: variable displacement hydraulic piston motor from 32 to 65 cc, double relief valve with anticavitation and brake function, flow control valve, hydraulic hood. For the UML/HY/VT 80/50 cc variable torque hydraulic motor.Options: custom made attachment plate with pins, diverter valve,possibility to have the rotor equipped with tooth type “C/3/HD” or blade C/3.
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavator weightt.
Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Teethq.ty/type
C/3+C/3/SS
UML/HY/VT 100 70 - 110 100 - 200 180 - 350 7 - 14 1100 870 150 20+2
UML/HY/VT 125 70 - 110 100 - 200 180 - 350 7 - 14 1340 970 150 26+2
UML/HY/VT 150 70 - 110 100 - 200 180 - 350 7 - 14 1580 1070 150 32+2
UML/HYModel Requirements
Power HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavator weightt.
Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Teethq.ty/type
C/3+C/3/SS
UML/HY 100 70 - 110 70 - 160 180 - 250 7 - 14 1100 870 150 20+2
UML/HY 125 70 - 110 70 - 160 180 - 250 7 - 14 1340 970 150 26+2
UML/HY 150 70 - 110 70 - 160 180 - 250 7 - 14 1580 1070 150 32+2
Tooth type C/3 (standard) Tooth type C/3/SS (side scraper)Tooth type C/3/HD (option) Tooth blade type C/3 (option)
HYDRAULIC 15
FML/HYMulcher withswinging hammers rotor forexcavators having a weight between 7 and 14 t.
FML/HY
Hammer type FML
Data refers to the machine without options.
Standard equipment: variable displacement hydraulic piston motor from 32 to 65 cc, double relief valve with anticavitation and brake function, flow control valve, hydraulic hood.Options: custom made attachment plate with pins, diverter valve.
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavator weight t.
Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Hammers q.ty/type
FML
FML/HY 100 70 - 110 70 - 160 180 - 250 7 - 14 1100 830 150 16
FML/HY 125 70 - 110 70 - 160 180 - 250 7 - 14 1340 930 150 20
FML/HY 150 70 - 110 70 - 160 180 - 250 7 - 14 1580 1030 150 24
HYDRAULIC 16
UML/EXUML/EX/VTMulcher with fixed teeth rotor for excavators having a weight between 14 and 20 t.
Data refers to the machine without options.
Standard equipment: 63 cc hydraulic piston motor, anticavitation valve, flow control system valve, hydraulic hood.110/60 cc variable torque hydraulic motor for the UML/EX/VT.Options: custom made attachment plate with pins, diverter valve, possibility to have the rotor equipped with tooth type “C/3/HD” or blade C/3.
UML/EXModel Requirements
Power HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavator weightt.
Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Teethq.ty/type
C/3+C/3/SS
UML/EX 100 90 - 120 110 - 150 220 - 350 14 - 20 1100 980 200 20+2
UML/EX 125 90 - 120 110 - 150 220 - 350 14 - 20 1340 1085 200 26+2
UML/EX 150 100 - 120 110 - 150 220 - 350 14 - 20 1580 1185 200 32+2
UML/EX/VT Hydraulic motor with variable torqueModel Requirements
Power HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavator weightt.
Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Teethq.ty/type
C/3+C/3/SS
UML/EX/VT 100 90 - 120 120 - 180 220 - 350 14 - 20 1100 980 200 20+2
UML/EX/VT 125 90 - 120 120 - 180 220 - 350 14 - 20 1340 1140 200 26+2
UML/EX/VT 150 100 - 120 120 - 180 220 - 350 14 - 20 1580 1240 200 32+2
Tooth type C/3 (standard) Tooth type C/3/SS (side scraper)Tooth type C/3/HD (option) Tooth blade type C/3 (option)
HYDRAULIC 17
FML/EXMulcher with swinginghammers rotor forexcavators having a weight between 14 and 20 t.
FML/EX
Hammer type FMM
Data refers to the machine without options.
Standard equipment: 63 cc hydraulic piston motor, with anticavitation valve, flow control system valve, hydraulic hood.Options: custom made attachment plate with pins, diverter valve.
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavator weight t.
Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Hammers q.ty/type
FMM
FML/EX 100 90 - 120 110 - 150 220 - 350 14 - 20 1100 950 200 16
FML/EX 125 90 - 120 110 - 150 220 - 350 14 - 20 1340 1050 200 20
FML/EX 150 100 - 120 110 - 150 220 - 350 14 - 20 1580 1150 200 24
HYDRAULIC 18
UMM/EXUMM/EX/DTUMM/EX/VT Mulcher with fixed teeth rotor for excavators havinga weight between20 and 30 t.
Data refers to the machine without options.
Standard equipment: 63 cc hydraulic piston motor, with double relief valve with anticavitation function, flow control system valve, hydraulic hood. 110/60cc variable torque hydraulic motor for the UMM/EX/VT.Options: custom made attachment plate with pins,90 cc hydraulic piston motor, kit DT(= double transmission), diverter valve,possibility to have the rotor equippedwith tooth type “C/3/HD” or blade C/3.
UMM/EXModel Requirements
Power HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavator weightt
Min Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Teethq.ty/type
C/3+C/3/SS
UMM/EX 125 120 - 160 130 - 180 240 - 350 20 - 30 1340 1590 300 26+2
UMM/EX 150 120 - 160 130 - 180 240 - 350 20 - 30 1580 1690 300 32+2
UMM/EX/DTModel Requirements
Power HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavator weightt.
Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Teethq.ty/type
C/3+C/3/SS
UMM/EX/DT 125 140 - 200 250 - 380 240 - 350 20 - 30 1340 1590 300 26+2
UMM/EX/DT 150 140 - 200 250 - 380 240 - 350 20 - 30 1580 1690 300 32+2
UMM/EX/VT Hydraulic motor with variable torqueModel Requirements
Power HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavator weightt.
Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Teethq.ty/type
C/3+C/3/SS
UMM/EX/VT 150 120 - 160 130 - 210 240 - 350 20 - 30 1580 1690 300 32+2
Tooth type C/3 (standard) Tooth type C/3/SS (side scraper)Tooth type C/3/HD (option) Tooth blade type C/3 (option)
HYDRAULIC 19
FMM/EXMulcher with swinginghammers rotor for excavators having a weight between 18 and 25 t.
FMM/EX
Hammer type FMM
Data refers to the machine without options.
Standard equipment: 63 cc hydraulic piston motor, with double relief valve with anticavitation function, flow control system valve, hydraulic hood.Options: custom made attachment plate with pins, 90 cc hydraulic piston motor, diverter valve.
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavator weight t.
Min - Max
Workingwidth mm
Weight Kg
Grinding diametermm (max)
Hammers q.ty/type
FMM
FMM/EX 125 120 - 160 145 - 180 240 - 350 18 - 25 1340 1550 300 20
FMM/EX 150 120 - 160 145 - 180 240 - 350 18 - 25 1580 1670 300 24
HYDRAULIC 20
SCM/EX/VTStump cutter with fixed tooth system for excavators having a weight between 12 and 20 t.
Standard equipment: „flow control system”, hydraulic front hood, base plate, variable torque hydraulic piston motor, rotating plate mechanically adjustable.Options: front fixed thumb, custom made attachment plate with pins, diverter valve.
SCM/EX/VT
The data refers to the machine without options.
Model RequirementsPower HP Flow L/min Pressure BarMin - Max Min - Max Min - Max
Excavator weight TMin - Max
Cutter wheeldiameter
mm
Overal widthmm
Weight Kg
Teeth q.ty/typeM1/M2/M3/M4
SCM/EX/VT 70 - 150 120 - 220 220 - 350 12 - 20 790 770 1020 12+3+12+3
High performance tooth systemM3 M1 M4 M2
HYDRAULIC 21
High performances in a compact size
The new FAE SCM/EX/VT stump cutter is designed to meet the needs of professionals to quickly and easily remove stumps in nearly any situation.Equipped with exclusive features, this machine ensures the best results in a compact unit.The FAE SCM/EX/VT is supplied with a flow control system that allows it to fit different power excavators.The front hood with hydraulic adjustment and the special front thumb guarantees very high performance and maximum safety.
Thanks to the tough, reliable and easy to use special wheel, the stumps are simply swept away.
The hydraulic adjustment of the front hoodprovides safer working conditions.
The base plate ensures maximum safety while stationary.
The front fixed thumb is designed to move the cut material.
The easy setting of the „flow control system” makes the SCM/EX/VT suitable for a wide power range of excavators.
Authorized dealer
Tech
nica
l dat
a an
d im
ages
on
this
cat
alog
ue c
an b
e m
odifi
ed w
ithou
t not
ice.
01/
2015
FOREST AGRICULTURE ROAD HYDRAULIC PRIME MOVER RECYCLING
FAE GROUP S.p.A. Zona Produttiva, 18 - P. O. Box 61 38013 Fondo (TN) Italytel. +39 0463 840 000, fax +39 0463 840 099, [email protected], www.fae-group.com
