HYDRAULIC HAMMER MARTILLIO HIDRÁULICO
Transcript of HYDRAULIC HAMMER MARTILLIO HIDRÁULICO
U.EMME s.r.l.Via dell’Artigianato 1947015 Modigliana (FC) Tel. +39 0546 941725Fax +39 0546 940050 [email protected]
ARIETE
Los datos, descripciones y las ilustraciones de este documento son indica-tivos y no vinculantes. U.Emme se reserva el derecho a introducir modifi-caciones sin previo aviso.
Martillo hidráulico
MARTILLIO HIDRÁULICO
U.Emme puede combinar su propio accesorio en cada marca y modelo de máquina portante
The details, descriptions and illustrations contained herein are intended to serve as guideline only and cannot be binding on the manufactures. U.EMME reserve the right to make any changes deemed necessary, without notice.
U.Emme is able to match its own attachment on every brand and model of host machines
Hydraulic Hammer
HYDRAULIC HAMMER
ARIETE 60
ARIETE 90
ARIETE 150
ARIETE 200
ARIETE 250
ARIETE 300
ARIETE 400
152 270 330 450 755 800 855
9-18 20-25 27-30 30-45 33-55 60-90 60-110
80-100 90-110 95-120 120-140 130-145 130-145 140-150
60 100 150 200 250 310 400
36 45 50 57 65 65 80
• • • • • • •
• • • • • • •
• • • • • •
ARIETE
La demolición es un arte: el arte de la destrucción. El artista, creando o destruyendo, necesita de her-ramientas de trabajo capaces de dar protagonismo a sus propias habilidades. Como satisfacción de esta demanda, nació una línea de martillos hidráulicos: los martillos de U.Emme, herramientas de demolición por excelencia que combinan fiabilidad y potencia. Gracias a la experiencia en el cam-po, descubrimos que la diferencia en el ruido causado por los martillos silenciados y los martillos no si-lenciados consiste en un puñado de decibelios (es el golpe de la herramienta que trabaja en el cuerpo que se demuele lo que causa la mayor parte del ruido). Por lo tanto, U.Emme ha decidido diseñar una serie de martillos abiertos en 2 lados, lo que permite un mantenimiento fácil y rápido, si es necesario. Cada modelo de martillo ARIETE tiene un sistema de recuperación de energía que proporciona más potencia que los martillos convencionales a membrana, ya que utiliza la presión de gas en la cabeza del martillo y, por lo tanto, es independiente de la línea hidráulica auxiliar de la máquina portante. De hecho, el aceite necesario se encuentra solo en la primera parte de la carga del cilindro y luego inter-viene el gas asegurando disparos precisos y potentes al actuar como un resorte. ARIETE puede trabajar con altos valores de contrapresión en la línea de retorno (27 bar como máximo) sin afectar el rendimiento y amortizar todos los golpes incorrectos gracias a una función especial de auto-freno, mientras que un sistema interno de autorregulación de aceite gestiona el flujo entrante. U.Emme ARIETE: el martillo hidráulico potente, de diseño inteligente.
CARACTERÍSTICAS TÉCNICAS
Placa atornilladapara excavadora
Placa atornillada para brazo mixtas
Punta cónica
Placa paraminicargadora
Placa atornillada para en-ganche rápido (adaptadorno incluido)
HERRAMIENTAS Y ACOPLAMIENTOS
Energía de impacto (j)
Flujo min-max (lt/min)
Presión min-max (bar)
Peso sin enganche (kg)
Ø de la herrmienta (mm)
Punta cónica
Cincel
Espátula
MODELOS
Carter robusto con tiras de espuma antivibración
Estándar equipado con una herramienta para elegir entre punta cónica y cincel
Sistema de acoplamiento atornillado
Distribuidor de fácil acceso con sistema interno de autorregulación de aceite.
Función de frenado automático capaz de amortizar todos los golpes perdidos
Cincel horizontal y vertical
Espátula horizontale y vertical
Demolition is an art: the art of destruction. The artist, creating or destroying, needs working tools able to give prominence to his own skills. As satisfaction of this demand was born a line of hydraulic hammers: U.Emme breakers, excellence demolition tools combining reliability and power. Thanks to experience on field we found out that the difference in noise caused by silenced hammers and non silenced hammers consists of a handful of decibels (it is the stroke of the tool working on the body to be demolished that causes most of the noise). We therefore decided to project a series of hammers opened on 2 sides, allowing an easy and quick maintenance, if needed. Hydraulic ham-mers ARIETE gots an energy recovery system providing more power than conventional mem-brane hammers, as it uses the gas pressure in the hammer head and therefore is independent from the auxiliary hydraulic line of the host machine. In fact the oil needed is only in the first part of the cylinder charging and after which intervenes the gas ensuring precise and powerful shots by acting like a spring. Each ARIETE hammer is able to work with high back pressure values on the return line (27 bar maximum) without effects on performances and to amortise all mis-hits thanks to a special self-brake function, while an internal oil self-regulating system manages the incoming flow. U.Emme ARIETE: the powerful hydraulic hammer, by intelligent design.
TECHNICAL SPECIFICATIONS
TOOLS & CONNECTION SYSTEMS
Plate for excavator
Plate for backhoe loader
Conical tip
Plate for skid-steer loader
Plate for quick coupler (adapter not included)
Hit energy (j)
Min-max oil flow (lt/min)
Min-max pressure (bar)
Weight without linkage (Kg.)
Tool Ø (mm)
Conical tip
Chisel
Putty knife
MODELS
Heavy duty carter with anti-vibration foam strips
Standard equipped byone tool choosing between conical tip and chisel
Bolted connection system
Easy to access controlvalve with internal oil self-regulating system
Self-braking function able to amortise all mis-hits
Horizontal and verti-cal chisel
Horizontal and vertical putty knife
ARIETE 60
ARIETE 90
ARIETE 150
ARIETE 200
ARIETE 250
ARIETE 300
ARIETE 400
152 270 330 450 755 800 855
9-18 20-25 27-30 30-45 33-55 60-90 60-110
80-100 90-110 95-120 120-140 130-145 130-145 140-150
60 100 150 200 250 310 400
36 45 50 57 65 65 80
• • • • • • •
• • • • • • •
• • • • • •
ARIETE
La demolición es un arte: el arte de la destrucción. El artista, creando o destruyendo, necesita de her-ramientas de trabajo capaces de dar protagonismo a sus propias habilidades. Como satisfacción de esta demanda, nació una línea de martillos hidráulicos: los martillos de U.Emme, herramientas de demolición por excelencia que combinan fiabilidad y potencia. Gracias a la experiencia en el cam-po, descubrimos que la diferencia en el ruido causado por los martillos silenciados y los martillos no si-lenciados consiste en un puñado de decibelios (es el golpe de la herramienta que trabaja en el cuerpo que se demuele lo que causa la mayor parte del ruido). Por lo tanto, U.Emme ha decidido diseñar una serie de martillos abiertos en 2 lados, lo que permite un mantenimiento fácil y rápido, si es necesario. Cada modelo de martillo ARIETE tiene un sistema de recuperación de energía que proporciona más potencia que los martillos convencionales a membrana, ya que utiliza la presión de gas en la cabeza del martillo y, por lo tanto, es independiente de la línea hidráulica auxiliar de la máquina portante. De hecho, el aceite necesario se encuentra solo en la primera parte de la carga del cilindro y luego inter-viene el gas asegurando disparos precisos y potentes al actuar como un resorte. ARIETE puede trabajar con altos valores de contrapresión en la línea de retorno (27 bar como máximo) sin afectar el rendimiento y amortizar todos los golpes incorrectos gracias a una función especial de auto-freno, mientras que un sistema interno de autorregulación de aceite gestiona el flujo entrante. U.Emme ARIETE: el martillo hidráulico potente, de diseño inteligente.
CARACTERÍSTICAS TÉCNICAS
Placa atornilladapara excavadora
Placa atornillada para brazo mixtas
Punta cónica
Placa paraminicargadora
Placa atornillada para en-ganche rápido (adaptadorno incluido)
HERRAMIENTAS Y ACOPLAMIENTOS
Energía de impacto (j)
Flujo min-max (lt/min)
Presión min-max (bar)
Peso sin enganche (kg)
Ø de la herrmienta (mm)
Punta cónica
Cincel
Espátula
MODELOS
Carter robusto con tiras de espuma antivibración
Estándar equipado con una herramienta para elegir entre punta cónica y cincel
Sistema de acoplamiento atornillado
Distribuidor de fácil acceso con sistema interno de autorregulación de aceite.
Función de frenado automático capaz de amortizar todos los golpes perdidos
Cincel horizontal y vertical
Espátula horizontale y vertical
Demolition is an art: the art of destruction. The artist, creating or destroying, needs working tools able to give prominence to his own skills. As satisfaction of this demand was born a line of hydraulic hammers: U.Emme breakers, excellence demolition tools combining reliability and power. Thanks to experience on field we found out that the difference in noise caused by silenced hammers and non silenced hammers consists of a handful of decibels (it is the stroke of the tool working on the body to be demolished that causes most of the noise). We therefore decided to project a series of hammers opened on 2 sides, allowing an easy and quick maintenance, if needed. Hydraulic ham-mers ARIETE gots an energy recovery system providing more power than conventional mem-brane hammers, as it uses the gas pressure in the hammer head and therefore is independent from the auxiliary hydraulic line of the host machine. In fact the oil needed is only in the first part of the cylinder charging and after which intervenes the gas ensuring precise and powerful shots by acting like a spring. Each ARIETE hammer is able to work with high back pressure values on the return line (27 bar maximum) without effects on performances and to amortise all mis-hits thanks to a special self-brake function, while an internal oil self-regulating system manages the incoming flow. U.Emme ARIETE: the powerful hydraulic hammer, by intelligent design.
TECHNICAL SPECIFICATIONS
TOOLS & CONNECTION SYSTEMS
Plate for excavator
Plate for backhoe loader
Conical tip
Plate for skid-steer loader
Plate for quick coupler (adapter not included)
Hit energy (j)
Min-max oil flow (lt/min)
Min-max pressure (bar)
Weight without linkage (Kg.)
Tool Ø (mm)
Conical tip
Chisel
Putty knife
MODELS
Heavy duty carter with anti-vibration foam strips
Standard equipped byone tool choosing between conical tip and chisel
Bolted connection system
Easy to access controlvalve with internal oil self-regulating system
Self-braking function able to amortise all mis-hits
Horizontal and verti-cal chisel
Horizontal and vertical putty knife
U.EMME s.r.l.Via dell’Artigianato 1947015 Modigliana (FC) Tel. +39 0546 941725Fax +39 0546 940050 [email protected]
ARIETE
Los datos, descripciones y las ilustraciones de este documento son indica-tivos y no vinculantes. U.Emme se reserva el derecho a introducir modifi-caciones sin previo aviso.
Martillo hidráulico
MARTILLIO HIDRÁULICO
U.Emme puede combinar su propio accesorio en cada marca y modelo de máquina portante
The details, descriptions and illustrations contained herein are intended to serve as guideline only and cannot be binding on the manufactures. U.EMME reserve the right to make any changes deemed necessary, without notice.
U.Emme is able to match its own attachment on every brand and model of host machines
Hydraulic Hammer
HYDRAULIC HAMMER