Hydraulic CranesInstallation Option: rear chassis consoleTechnical Data :Maximum length of horizontal arm 7,15 mMaximum Load opening 7.15 m 1.060 kgRotation angle 4000Mass 1.138 kg

Norms of designing and manufacturing : DIN 15018 si EN 292/12999.Technical Data:- Hydraulic clamping system with extended on both sides- Rotate the rack system, driven by two hydraulic cylinders;- Limit time in accordance with EU rules;- Emergency stop button - "mushroom" - mounted at the control station;- Warning sound when time limiter is activated;- It is equipped with swivel hook- It is equipped with safety valves on the main lift cylinders and on telescoping cylindersand hydraulic cylinders of the clamping system- To drive the crane is provided a power outlet with pneumatic driving having the control buttoninstalled in the cabin and a hydraulic pump.- It is equipped with manually operated hydraulic distributors can beoperated on both sides of the crane- Oil tank is mounted on the chassis of the vehicle;- The crane is equipped with a filter on the tank (the return flow);- Pressure gauge on the return circuit, mounted on hydraulic tank;- Gauges indicating cylinder hydraulic loading- Indicators of flatness on both sides of the crane;- Hours of operation indicator;- Warning Horn;- System lifting capacity limit, depending on the expansion holdscrane;- Protection against corrosion by sandblasting and paint-coating - coatingmetal powder and high temperature drying - PQS;

WARRANTY: Two years after delivery.

Heavy extrication superstructureThe superstructure is made of aluminum alloy, on a high strength and flexibility aluminumframe, assembled with demountable fasteners. The entire superstructure is covered withaluminum plate applied by adhesion.Side walls are locked in a structure which is integrated door type, "roller Shutter”, 3 pieces oneach side and a back piece made of aluminum.Shelves and accessories are arranged ergonomic so that it can be accessed from the ground level.The superstructure will be fitted with aluminum access stairs, folding or sliding so as to alloweasy access to the upper accessories compartments.Electrical installation in accordance with the law, side clearance lamps (according to Directive76/758 or Regulation 7 / 2002);

Hydraulic winchTechnical DataTraction force 6 000 KgRation 1 : 3.5Required flow 125 l/minWinch Cable Diameter 12 mmWinch Cable Length 40 mDimensions: 644x 536 x 324 mmWeight: 147 KgMain components:• Mounting Kit (front mounting plate)• Hydraulic Distributor;• Hose connection kit;• Hydraulic quick couplings between truck and trailer;Drive:

It is run by operating the control lever,Leverage is provided by the winch mounted hydraulic distributorchassis.

Mounting plate fixing:Board support is a rigid construction installed on the end cross chassis.The board has quick fix.The superstructure will be fitted with shelves built to ensure possibility of interchangeability andsubsequent relocation in operation.Shelves must be at operational levels depending on the specific equipment and are equipped withdrawers, mounting brackets, lighting lamps.Interior lighting lamps are equipped with double circuit - operating from the compartment butalso from the cabin crew as well .The position, size and number of the shelves will be determined by mutual agreed.