Hydraulic braking system and components
-
Upload
krushna-nale -
Category
Automotive
-
view
89 -
download
5
Transcript of Hydraulic braking system and components
“HYDRAULIC BRAKING SYSTEM”
Guided BY, Presented BY , Prof. P.D.SHELKE SIR KRUSHNA NALE
(132063)
GOVERNMENT POLYTECHNIC, AURANGABAD(An Autonomous Institute of Government of Maharashtra)
A Seminar on ,
What is Braking ? Braking is the Action of Stopping the running vehicle. Action of braking is done by using Brake. In Brake The kinetic energy due to motion of the vehicle is dissipated in the form of heat energy due to friction between moving parts (Between wheel Drum and Brake Shoe).
Function of Brake – There are two main functions of brakes : To slow down or stop the vehicle in the shortest possible time at the time of need. To control the speed of vehicle at turns and also at the time of driving down on a hill slope.
Classification of Brakes –
On The Basis Of Method Of Actuation-
Foot Brake Hand Brake
On The Basis Of Mode Of Operation-
Mechanical Brakes Hydraulic Brakes Air Brakes Vacuum Brakes Electric Brakes.
On The Basis Of Method Of Application Of Braking Contact-
Internally – Expanding Brakes Externally – Contracting Brakes
What is Hydraulic Braking System?Hydraulic Braking System is the System Which used Hydraulic Fluid to build up the pressure for Braking Action. History-
Fred Duesenberg originated hydraulic brakes in 1914.
Then In 1918 Malcolm Lougheed Developed full Hydraulic Braking System.
PRINCIPLE OF WORKING-Hydraulic brakes work on the principle of Pascal’s law.
Pascal law states that “pressure at on Incompressible fluid
is equal in all directions”.
TYPES OF HYDRAULIC BRAKE- There are Two types of Hydraulic Breaking System.
1. Expanding Drum Type hydraulic Brake.
2. Disc Type hydraulic Brake.
COMPONENTS OF DRUM TYPE BRAKE SYSTEM-
Master Cylinder.
Backing Plate.
Brake Drum.
Wheel Cylinder.
Brake Shoe .
Return spring.
Master Cylinder-
Master Cylinder is Heart of Hydraulic Braking System.
It pressurized the Braking Fluid Which is in Reservoir to
actuate the Wheel Cylinder for braking Action.
Tandam Master Cylinder-
Tandam Master Cylinder is
Latest Development in
hydraulic Braking System.
It reduced Risk of Brake
Failing.
There are two Different
section in tandam Master
Cylinder for pressurized the
Brake Fluid.
Backing Plate-
Backing Plate is Base for
other Component.
Wheel Cylinder, brake
shoe, Parking brake
mechanism are mounted
on it.
It should be strong and
wear resistant.
Brake Drum-
Drum is rotated with wheel and Axle.
Brake Shoe are pressed against the Brake Drum as Beake Applied.
It is heat conductive.
Wheel cylinder-
There is seperate wheel Cylinder for each wheel .
It function is to exert force on Brake shoe.
It consist of two piston one on each side.
Brake Shoe-
There are two Brake Shoe
for each wheel.
Friction Material is at outer
lining of Brake Shoe.
It should be heat and wear
resistant.
Return Spring-
Return Spring pull the
brake Shoe back as Brake
Pedal is released.
Working of Drum type Hydraulic Brake-Brake Pedal Pressed.
Brake Fluid Pressurized in Master cylinder.
Pressurized fluid is travel through hose pipes.
Pistons in wheel cylinder are actuate and pressed brake shoe against wheel Drum.
Due to Friction between Brake Shoe and wheel Drum Braking action is performed.
Component of Disc type Hydraulic brake system-
Brake Rotor. Brake
Caliper. Brake pad.
Brake Rotor- It is component against which Brake pad is
Appiled. Brake Rotor is made of Grey iron or special alloy. It rotate with wheel. Hole are drill on Brake Rotor for heat dissipation.
Brake Pad- Brake Pad is Frictional Component of Disc brake. Generally there are two Brake Pad per Caliper in
Disc Brake. It is palced in front of caliper piston.
Brake caliper- It is assembly which house the Brake pad
and Piston. It is made from plastic , aluminium or
chrome plated steel. Two Types- Fixed and Floating caliper.
Working of Disc Type Hydraulic Brake-Brake Pedal Pressed.
Brake Fluid Pressurized in Master cylinder.
Pressurized fluid is travel through hose pipes.
Thus, this Pressurized fluid press Brake pad against Brake Rotor.
Due to Friction between Brake pad and Brake rotor action is performed.
Valves Used in Hydraulic Brake System-
1.Proportioning valve or equalizer valve-
2. Pressure differential valve-
3. Combination valve
Brake Fluid-
Brake Fluid is Typical Type of Fluid which used
in Hydraulic Brake system.
Brake Fluid is incompressible.
Glycol- ether, Castor oil , Mineral Oil are
example of Brake Fluid.
Characteristic of Brake Fluid-
Boiling Point
Viscosity
Corrosion Resistance
Compressibility
Advantage and Disadvantage Of Hydraulic Brake-ADVANTAGES-
Equal braking action on all wheels. Increased braking force. Low wear rate of brake linings. Increased mechanical advantage. Better stopping power than the other Brakes
DISADVANTAGES-
Whole braking system fails due to leakage of fluid from brake linings
Complex construction. More maintenance than other system
Application -
Automotive Brake-
The Hydraulic Braking System is use in car , Jeep ,
Mini Truck o in Buses
THANK YOU !!