Hybrid SolutionS - Panos Inženjering

Hybrid SolutionS

The New Generation of Fiber-to-the-Antenna Cabling

Rosenberger Asia Pacific Electronic Co., Ltd.

No.3, Anxiang Street, Block B, Tianzhu Airport Industrial Zone

Beijing, China 101300

Tel : (+86 10) 80481995

Fax : (+86 10) 80497052

Email: [email protected]

Rosenberger (Shanghai) Technology Co.,Ltd.

No. 303, Xinke Road, Qingpu Industrial Zone

Shanghai, China 201707

Tel : (+86 21) 69214567

Fax : (+86 21) 69212923

Rosenberger Asia Pacific Electronic Co., Ltd. Shanghai Division

B7, No. 509, Renqing Road, East Zone of Zhangjiang High-Tech Park


Tel : (+86 21) 58995997

Fax : (+86 21) 58995594

Rosenberger Asia Pacific Electronic Co., Ltd. Dongguan Division

No.1, 1st Road of Shanglian, Jiaoshe Village, Dongkeng Town

Dongguan, Guangdong Province, China 523443

Tel : (+86 769) 82802098

Fax : (+86 769) 82802099

Rosenberger All rights reserved. 1st Edition, 2013

Please visit our website: www.RosenbergerAP.com

www.RosenbergerAP.com

Introduction01

Rosenberger HQ, Bavaria, Germany

01

A

B

C

D

E

Rosenberger Asia Pacific: A: Beijing − Headquarters, R&D,

and Production

B: Shanghai Zhangjiang − R&D

and Production

C: Shanghai Qingpu − R&D and

Production

D: India − R&D and Production

E: Dongguan − R&D and

Production

Rosenberger Hochfrequenztechnik GmbH&Co. was founded in Germany in 1958 and ranks among the leading manufacturers of high-speed interconnect solutions worldwide. To serve the continuous growth and demand of the global market, Rosenberger Asia Pacific Electronic Co., Ltd. was established in China in 1997. With its long tradition of excellence and providing creative solutions, Rosenberger Asia Pacific has excelled and earned an outstanding reputation in the Asia Pacific region.

Rosenberger Asia Pacific provides products and solutions for Telecommunication, Automotive Electronics, Information Technology, Test & Measurement, Aviation, and Medical & Industries.

A sales network covering the entire Asia Pacific region generates an annual turnover close to 200 million USD. Reliability and competitiveness are the cornerstones of this sustainable growth, resulting in long term partnerships with most of the leading companies in their respective industries.

Rosenberger Asia Pacific maintains 6 modern manufacturing and R&D base locations in Beijing, Shanghai, and Dongguan in China; and New Delhi in India, the largest of its kind in the Asia Pacific Region. Rosenberger Asia Pacific is an ISO 9001 quality system, ISO 14001 environmental system, and ISO/TS16949 automotive industry system certified company. Equipped with advanced machining, electronic plating, assembly and testing centers and staffed by a large group of more then 200 R&D engineers, Rosenberger Asia Pacific has developed first class production assembly lines and exercises stringent product and quality control.

Presently, Rosenberger Asia Pacific maintains a far reaching network of R&D, Production, Sales and Service which extends to the whole Asia Pacific and Middle East area. For over 50 years Rosenberger has established its brand all over the world. In the future, Rosenberger Asia Pacific will continue to provide excellent product solutions and services for its customers in the entire region.

02

Fiber-to-the Antenna (FTTA)02

03

Site Solutions from Rosenberger address your network connectivity needs for today and the future

There is a huge demand for high-speed data transfer in today’s global mobile telecommunication networks. Fiber-fed remote radio technology offers potential savings in both capital expenditure (CapEx) and operating expense (OpEx) reductions compared with traditional coaxial cable-based solutions.

The connectivity performance between the base station and RRU/Antenna is essential to maintaining the quality of service between the network and end-user. There are two methods of implementation: a single hybrid cable assembly (containing multiple fiber and DC power feeds) or utilizing several individual power and fiber cable feeds in parallel. Rosenberger, a professional site solutions provider, offers both to meet a variety of customer applications.

The New Generation of FTTA Cabling − Hybrid Solutions are effective in streamlining operations when replacing traditional base station equipment with RRUs or upgrading a site to support RRUs. A single hybrid cable provides multiple fiber and power conductors. This is advantageous as it consolidates space and can provide room for growth for additional RRUs. Rosenberger pre-terminated hybrid cable assemblies minimize the amount of cables running up the tower. A single hybrid cable provides several fiber and power conductors to support multiple RRUs. The flexible lightweight aluminum corrugated cable allows operators to ground the cabling system. To simplify installation, the hybrid cable outer dimension follows standard feeder dimensions (1/2”, 7/8”, or 1-1/4”) and enables use of standard feeder clamps, grounding kits.

Fiber-to-the Antenna

(FTTA)

04

EasylinkTM Hybrid Solution03

EasylinkTM Hybrid Solution is designed with slim dividers which split multi-fiber and DC cables into individual outdoor cables. The hybrid trunk cables are terminated with IP67-rated connectors. Different types of jumpers are available to allow connection between the hybrid cable and any vendor-specific hardware interface.

EasylinkTM Hybrid Solution is the best choice for operators who lease space on tower cell sites. It reduces annual leasing costs by reducing the space utilized on the tower. Plug-and-Play connections minimize installation time and require no tools.

Features and Benefits:

• Plug-and-play installation • Reduced installation costs• Reduced tower loading and leasing costs• IP67 outdoor waterproof fiber and power connectors • Flexibility to replace or upgrade RRUs by changing Jumpers

05

FTTA JumpersIP67 RDC Connector

Power JumpersIP67 Power Connector

EasylinkTM HybridIP67 Slim Divider

19" Patch Panel(optional)

EasylinkTM Hybrid Cable Assembly

EasylinkTM Hybrid

Solution

• Support three to six RRUs• IP67 compact and slim divider• Easy adjustment of length of breakout point in hybrid cable• Fiber optic cables terminated with RDC plugs; connect to vendor-specific interfaces using FTTA extension jumpers• Power cables terminated with connecters or left open-ended• Color and number coding for easy identification

Features

Specifications

Parts

Side A (RRU)Fiber: RDC plug or RRU connector

Power: open-end or connector

Side B (BTS)Fiber: trunk breakout with LC duplex

Power: open-end

Divider Aluminium, Min. Ф63mm, height 180mm

Breakout Cable Length (RRU)Fiber: Min. 0.6m (customized lengths available)

Power: Min. 0.5m (customized lengths available)

Cable Retention Force (at Divider)

Fiber breakout cable: 200N

Power breakout cable: 500N

Hybrid cable: 1000N

Temperature Range -40°C ~ +70°C

Packing Wood board drum

Hybrid Cable

Outer Diameter Nominal (mm) 27.5 ± 0.5mm (7/8" cross-section), 39 ± 0.8mm (1-1/4" cross-section)

Jacket Material LSZH, resistant to sunlight (UV)

Armored Type Corrugated aluminum

Number of Fibers 6 ~ 48

Fiber Type SM or MM

Copper Cores 4mm2 (12AWG), 6mm2 (10AWG), 10mm2 (8AWG)

Number of Conductors 6 (3 pairs), 8 (4 pairs), 10 (5 pairs), 12 (6 pairs)

Nominal Voltage Uo/U 600/1000V

Flammability IEC 60332-1

2002/95/EC(RoHS) Compliant

06

03

07

Fiber and Power Jumpers

The Rosenberger Fiber Jumpers and Power Jumpers connect RRUs to the hybrid cable assembly at the tower top. Terminated with RDC connectors, these jumpers provide convenient interconnections between the hybrid cable and RRU or other equipment.

RDC Jumpers

Power Jumper

Optical Data

Mechanical Data

Specification

Environmental Data

* Other cable size options are available upon request.

RDC Connector

Insertion Loss Max. 0.5dB

Return Loss Min. 50dB single-mode

LC / SC Connector



Cable Diameter 4.8mm*

Cable Minimum Bending Radius

Installation 50mm

Operation 30mm

Cable Maximum Tensile Strength

Installation 450N

Operation 300N

Cable Crush Resistance 1KN/100mm

Number of Poles 2

Conductor 4mm2 (12AWG), 6mm2 (10AWG)

Ingress Protection IP67

Jacket Material PVC

Braid Tinned copper

Temperature Range Operation -40°C ~ +85°C

Temperature Range Storage -40°C ~ +70°C

Temperature Range Installation -10°C ~ +65°C

2002/95/EC (RoHS) Compliant

04

RMCTM Hybrid

Solution

08

RMCTM Hybrid Solution

RMCTM Hybrid Solution is terminated with Rosenberger Multi-fiber Connector (RMC) which utilizes standard MPO fiber interface with additional protection to work under harsh environments. Different types of jumpers are available to allow connection between the hybrid cable and any vendor-specific hardware interface.

A single fiber optic cable breakout, located at the hybrid trunk cable divider, enables easier installation when supporting more than three RRUs.


• Plug-and-play installation • Faster installation• Reduced tower loading and leasing costs• IP67 outdoor waterproof fiber and power connectors• No special tools required

FTTA JumpersIP67 RMC Connector

Power JumpersIP67 Power Connector

RMCTM HybridIP67 Slim Divider

19" Patch Panel(optional)

09

04 RMCTM Hybrid Cable Assembly

• Support three to six RRUs• IP67 compact and slim divider • Easy adjustment of length of breakout point in hybrid cable• Standard MPO interface, up to 24 fibers• Fiber optic cables terminated with RDC plugs; connect to vendor-specific interfaces using FTTA extension jumpers• Power cables terminated with connecters or left open-ended• Color and number coding for easy identification

Features

Specifications

Parts

Side A (RRU)Fiber: RMC plug

Power: open-end or connectorized

Side B (BTS)Fiber: trunk breakout with LC duplex

Power: open-end

Divider Aluminium, Min. Ф63mm, height 180mm

Breakout Cable Length (RRU)Fiber: Min. 0.8m (customized lengths available)

Power: Min. 0.5m (customized lengths available)

Cable Retention Force (at divider)

Fiber breakout cable: 200N

Power breakout cable: 500N

Hybrid cable: 1000N



Hybrid Cable

Outer Diameter Nominal (mm) 27.5 ± 0.5mm (7/8"cross-section), 39 ± 0.8mm (1-1/4"cross-section)




Fiber Type SM or MM


Number of Conductors 6 (3 pairs), 8 (4 pairs), 10 (5 pairs), 12 (6 pairs)

Nominal Voltage Uo/U 600/1000V



RMCTM Hybrid

Solution

10

RMC Fiber and Power Jumpers

The Rosenberger RMC Fiber and Power Jumpers connect RRUs to the RMC hybrid cable assembly at the tower top. Terminated with a RMC connector, the fiber jumper provides quick and convenient interconnections between the RMC hybrid cable and fiber interfaces on multiple RRUs.

RMC Jumpers

Power Jumper

Optical Data

Electrical Data

Environmental Data

RMC Connector



LC / SC Connector



Breakout FO Cable Diameter 4.8mm

Cable Minimum Bending Radius

Installation 50mm

Operation 30mm

Cable Maximum Tensile Strength

Installation 450N

Operation 300N

Cable Crush Resistance 1KN/100mm

Temperature Range Operation -40°C ~ +70°C

Temperature Range Storage -40°C ~ +70°C

Temperature Range Installation -10°C ~ +65°C

2002/95/EC (RoHS) Compliant

Mechanical Data

Number of Poles 2

Conductor 4mm2 (12AWG), 6mm2 (10AWG)

Ingress Protection IP67

Jacket Material PVC

Braid Tinned copper

Traditional Hybrid Solution05

Traditional Hybrid Solution is a typical design using a hybrid cable and distribution box. The cable runs from the BBU up the tower to a weatherproof distribution box at the top. The distribution box provides the interconnection point for power and signal between the tower cable and the jumpers leading to the RRUs. The Distribution box can include over-voltage protection (OVP). A secondary distribution box at the bottom is optional.

Towers containing multiple sectors can be a supported by multiple hybrid trunks. For example, 12 RRUs can be supported with only three RRU trunk cables running up the tower.


• Hybrid tail jumpers instead of individual fiber and power jumpers• Flexibility to replace or upgrade RRUs by changing Hybrid tail jumpers• IP67 Hybrid distribution box for fiber and power

11

Hybrid Tails

Hybrid DistributionBox (IP67)

Hybrid TrunkCable

19” Patch Panel

Traditional Hybrid Cable Assembly

Traditional Hybrid

Solution

• Support up to four RRUs• Easily grounded within the distribution box• Easy adjustment of length of breakout point in hybrid cable• Hybrid tail jumpers available to support vendor-specific interfaces• Connects to FO patch panel at base

Features

Specifications

12

Parts

Side A (box)Fiber: LC duplex connector

Power: open-end

Side B (BTS)Fiber: trunk breakout with LC duplex connector

Power: open-end

Breakout Cable Length (BTS)Fiber: 4m (customized lengths available)

Power: 4m (customized lengths available)



Hybrid Cable

Outer Diameter Nominal (mm) 27.5 ± 0.5mm (7/8" cross-section), 39 ± 0.8mm (1-1/4" cross-section)



Number of Fibers up to 24

Fiber Type SM or MM


Number of Conductors 8 (4 pair)

Nominal Voltage Uo/U: 600/1000V



Hybrid Distribution Box05

• Flexibility to upgrade RRUs by changing jumpers, not the entire cabling system.• Designed to handle up to 4RRUs.• Provides waterproof protection to fiber and power connections• One main hybrid trunk cable entry• Four hybrid tail jumper entries• Hinged cover

Used at tower top for fiber and power distribution for RRUs. Can also be utilized at the bottom of the tower for power and fiber integration.

Features

Dimension (L x W x H) 300mm x 300mm x 130mm

Mounting Pole, wall

Material Polycarbonate

Hybrid Trunk Cable 1 (7/8" cross-section)

Hybrid Tail Jumper 4 (1/2" cross-section)

Sealing of Jumpers Multihole cable glands

IP Rating IP67

Operation Temperature -40°C ~ +85°C

Earthing Grounding cable


13

Hybrid Tail Jumper

Traditional Hybrid

Solution

Specifications

Parts

Side A (RRU)Fiber: LC duplex connector or vendor-specific interfaces

Power: open-end

Side B (box)Fiber: LC duplex connector

Power: open-end

Breakout Cable Length (RRU)Fiber: 0.75m (customized lengths available)

Power: 0.75m (customized lengths available)

Breakout Cable Length (box)Fiber: 0.5m

Power: 0.5m


Packing Plastic bag

Hybrid Cable

Outer Diameter Nominal (mm) 15.8 ± 0.5mm (1/2" cross-section)




Fiber Type SM or MM

Copper Cores 4mm2 (12AWG), 6mm2 (10AWG)

Number of Conductors 2 (1 pair)

Nominal Voltage Uo/U: 600/1000V



14

NSN Radio

Ericsson Radio

Huawei Radio

ASideTop

BSide

Bottom

ASideTop

BSide

Bottom

ASideTop

BSide

Bottom

Hybrid SolutionS

The New Generation of Fiber-to-the-Antenna Cabling

Rosenberger Asia Pacific Electronic Co., Ltd.

No.3, Anxiang Street, Block B, Tianzhu Airport Industrial Zone

Beijing, China 101300

Tel : (+86 10) 80481995

Fax : (+86 10) 80497052

Email: [email protected]

Rosenberger (Shanghai) Technology Co.,Ltd.

No. 303, Xinke Road, Qingpu Industrial Zone


Tel : (+86 21) 69214567

Fax : (+86 21) 69212923

Rosenberger Asia Pacific Electronic Co., Ltd. Shanghai Division

B7, No. 509, Renqing Road, East Zone of Zhangjiang High-Tech Park


Tel : (+86 21) 58995997

Fax : (+86 21) 58995594

Rosenberger Asia Pacific Electronic Co., Ltd. Dongguan Division

No.1, 1st Road of Shanglian, Jiaoshe Village, Dongkeng Town

Dongguan, Guangdong Province, China 523443

Tel : (+86 769) 82802098

Fax : (+86 769) 82802099

Rosenberger All rights reserved. 1st Edition, 2013

Please visit our website: www.RosenbergerAP.com

www.RosenbergerAP.com

Hybrid SolutionS - Panos Inženjering

Documents

Transcript of Hybrid SolutionS - Panos Inženjering