Hybrid Drum Kit Catalog - Rolandlib.roland.co.jp/.../63073532/Hybrid_Drum_Kit_Catalog.pdfRoland...
Transcript of Hybrid Drum Kit Catalog - Rolandlib.roland.co.jp/.../63073532/Hybrid_Drum_Kit_Catalog.pdfRoland...
Imagine your perfect drum sound. And then play it.
Roland Hybrid Drum Catalog 2014
Visit us online at www.roland.com/V-Drums/www.Roland.com
Roland, V-Drums, V-Hi-Hat, and V-Cymbals,are either registered trademarks or trademarks of Roland Corporation in the United States and/or other countries.
All specifications and appearances are subject to change without notice.Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.The photographs on the front cover and pages inside were taken at Shinjuku BLAZE (Tokyo, Japan).
It is forbidden by law to make an audio recording, video recording, copy or revision of a third party’s copyrighted work (musical work, video work, broadcast, live performance, or other work), whether in whole or in part, and distribute, sell, lease, perform, or broadcast it without the permission of the copyright owner.Do not use this product for purposes that could infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this product.
Bring hybrid versatility to your drum kit
Printed in Japan December, 13 RAM-4855 AD-3 JB-KB-SS
Roland Hybrid DrumsThree Advantages
Roland Hybrid brings a new level of professional performance
to your drumming. Whether it’s just one sound effect you
need, an entire backing track, or switching musical styles
during the set, Roland Hybrid allows you to adapt your
sound, track by track. The audience will be impressed.
3. Amazing performance
It’s easy to create and set up a hybrid drum kit, even if you
have never used one previously. With Roland Hybrid, you
don’t have to change the look of your kit or adjust your
setup. The TM-2 sound module with acoustic triggers and
pads can be positioned easily on your kit and are simple to
set up and use.
2. Easy to use
1. Customize your sound
You can add extra electronic
sounds, such as tambourine,
hand claps or even your
own sounds, which play along
with your acoustic drum sound.
Layer your sounds
Expand the sounds available within
your kit. Play instruments that you
can’t take to the gig (such as
gongs) or that you don't have in
your original drum kit (such as
second snares or sub-drops).
Expand your kit
You can enhance your sound by
triggering an electronic sound and
mixing it with your acoustic sounds
for greater dynamic range,
increased clarity and performance.
Even the fastest double-bass drum
rolls sound clear and pronounced.
Enhance your sounds
Hybrid drums: take the raw power of acoustic drums, add the potential ofelectronics and start playing a drum kit that gives you the best of both worlds.
Acoustic drums Roland electronics.Your sound, no limits.
OUTPUT
Pads can be positioned
within your drum kit to
play electronic sounds/
audio. From mesh-head
second snares to
bar-triggers, adding pads
offers flexibility for your
setup and your sound.
Acoustic drum triggers
attach to the rim of an
acoustic drum and send
a signal to your sound
module every time
you hit the drum. This
gives you the acoustic
and electronic sound
simultaneously.
This is at the heart of
a hybrid kit, integrating
electronic sounds/audio
files into your drum kit.
Connecting your drum
trigger/pad sends
signals to this module
which then triggers your
chosen sounds.
SOUND MODULE DRUM TRIGGER PAD
+
Roland Hybrid DrumsThree Advantages
Roland Hybrid brings a new level of professional performance
to your drumming. Whether it’s just one sound effect you
need, an entire backing track, or switching musical styles
during the set, Roland Hybrid allows you to adapt your
sound, track by track. The audience will be impressed.
3. Amazing performance
It’s easy to create and set up a hybrid drum kit, even if you
have never used one previously. With Roland Hybrid, you
don’t have to change the look of your kit or adjust your
setup. The TM-2 sound module with acoustic triggers and
pads can be positioned easily on your kit and are simple to
set up and use.
2. Easy to use
1. Customize your sound
You can add extra electronic
sounds, such as tambourine,
hand claps or even your
own sounds, which play along
with your acoustic drum sound.
Layer your sounds
Expand the sounds available within
your kit. Play instruments that you
can’t take to the gig (such as
gongs) or that you don't have in
your original drum kit (such as
second snares or sub-drops).
Expand your kit
You can enhance your sound by
triggering an electronic sound and
mixing it with your acoustic sounds
for greater dynamic range,
increased clarity and performance.
Even the fastest double-bass drum
rolls sound clear and pronounced.
Enhance your sounds
Hybrid drums: take the raw power of acoustic drums, add the potential ofelectronics and start playing a drum kit that gives you the best of both worlds.
Acoustic drums Roland electronics.Your sound, no limits.
OUTPUT
Pads can be positioned
within your drum kit to
play electronic sounds/
audio. From mesh-head
second snares to
bar-triggers, adding pads
offers flexibility for your
setup and your sound.
Acoustic drum triggers
attach to the rim of an
acoustic drum and send
a signal to your sound
module every time
you hit the drum. This
gives you the acoustic
and electronic sound
simultaneously.
This is at the heart of
a hybrid kit, integrating
electronic sounds/audio
files into your drum kit.
Connecting your drum
trigger/pad sends
signals to this module
which then triggers your
chosen sounds.
SOUND MODULE DRUM TRIGGER PAD
+
You can combine different sound modules, triggers and pads to suit your sound. Here are a few examples.
Basic hybrid kit
Standard KitTM-2/RT-10K/RT-10S
Acoustic Drums: SONOR ProLite Series (Color: Blue Sparkle)
Acoustic Drums: TAMA Starclassic Bubinga (Color: Ultraviolet Sparkle)
Acoustic Drums: TAMA Sliverstar (Color: Dark Mocha Fade)
Model used: Model used:
Model used: Model used:
Model used: Model used:
TM-2/ 2×RT-10K
TM-2/2×BT-1
TD-15
This is a simple kit with acoustic drum triggers connected to the TM-2 sound module. This setup is perfect for a variety of musical genres, including rock and pop. It allows you to enhance or layer your kick and snare drum sound. This is the setup for those gigs when you can't always add microphones to your kit, or at least mic the kick and snare drums.
Give your kick drums heavier attack
Metal Kit
This kit has an RT-10K acoustic drum trigger attached to each kick drum. This is ideal when playing fast double-bass drum patterns, especially in metal music. This setup allows you to deliver heavy and powerful kick drum sounds by enhancing your acoustic sound with more attack from the electronic sound. No more muddy kick sound in the mix!
Hundreds of sounds in one hybrid drum kit
Percussion Kit
This kit features BT-1, a compact bar trigger pad attached to the snare and tom. When connected to the TM-2 sound module, the BT-1 can play percussion sounds such as tambourine, cowbell and wood blocks or can even play/stop audio tracks on the SD memory card. Depending on your configuration, you can connect up to four BT-1 pads to your TM-2.
More creativity from a simple kit
Modern Jazz KitTM-2/RT-10S/BT-1
This kit features a trigger on the snare drum and BT-1 on the tom holder arm. With this setup you can enhance your rim shots, layer characteristic snare sounds, and add percussion sounds to expand the number of instruments and sounds available in a simple kit.
If you own a V-Drums kit“From Room to Stage”Kit
TD-15/RT-10K/BT-1
If you already have a Roland V-Drums kit, you can use the sound module and pads to design your own hybrid setup. You can practice at home on your V-Drums kit and take the components you need out on the road as part of a hybrid kit. You can expand your hybrid setup by adding triggers and BT-1 pads and connecting to your V-Drums module.
The ultimate hybrid setup
Advanced KitTD-30/SPD-30/SPD-SX RT-10 series/KT-10/KD-7 5×BT-1/PD-128S/CY-14C
By incorporating the TD-30 V-Drums sound module in your kit, you gain connectivity to a large number of RT-10 series triggers and pads, such as a V-Pad for the second snare, a second kick sound with a KT-10 pedal and many BT-1 pads. The OCTAPAD SPD-30 provides additional percussion sounds and a phrase loop function for further sound expression.
RT-10K
TM-2
RT-10K RT-10K
RT-10K
PD-128SCY-14C
BT-1
TD-30
KD-7
TM-2
RT-10S
RT-10K
TM-2
BT-1
BT-1
RT-10S
TM-2
SPD-30
Acoustic Drums: dw Collector's Standard Maple Series (Color: Twisted White Satin)
Acoustic Drums: Premier XPK Series (Color: Translucent Ruby Lacquer)
Acoustic Drums: dw Performance Series (Color: Candy Apple Red)
RT-10S KT-10
SPD-SXBT-1
There are no restrictions to Roland Hybrid drums.
You can combine different sound modules, triggers and pads to suit your sound. Here are a few examples.
Basic hybrid kit
Standard KitTM-2/RT-10K/RT-10S
Acoustic Drums: SONOR ProLite Series (Color: Blue Sparkle)
Acoustic Drums: TAMA Starclassic Bubinga (Color: Ultraviolet Sparkle)
Acoustic Drums: TAMA Sliverstar (Color: Dark Mocha Fade)
Model used: Model used:
Model used: Model used:
Model used: Model used:
TM-2/ 2×RT-10K
TM-2/2×BT-1
TD-15
This is a simple kit with acoustic drum triggers connected to the TM-2 sound module. This setup is perfect for a variety of musical genres, including rock and pop. It allows you to enhance or layer your kick and snare drum sound. This is the setup for those gigs when you can't always add microphones to your kit, or at least mic the kick and snare drums.
Give your kick drums heavier attack
Metal Kit
This kit has an RT-10K acoustic drum trigger attached to each kick drum. This is ideal when playing fast double-bass drum patterns, especially in metal music. This setup allows you to deliver heavy and powerful kick drum sounds by enhancing your acoustic sound with more attack from the electronic sound. No more muddy kick sound in the mix!
Hundreds of sounds in one hybrid drum kit
Percussion Kit
This kit features BT-1, a compact bar trigger pad attached to the snare and tom. When connected to the TM-2 sound module, the BT-1 can play percussion sounds such as tambourine, cowbell and wood blocks or can even play/stop audio tracks on the SD memory card. Depending on your configuration, you can connect up to four BT-1 pads to your TM-2.
More creativity from a simple kit
Modern Jazz KitTM-2/RT-10S/BT-1
This kit features a trigger on the snare drum and BT-1 on the tom holder arm. With this setup you can enhance your rim shots, layer characteristic snare sounds, and add percussion sounds to expand the number of instruments and sounds available in a simple kit.
If you own a V-Drums kit“From Room to Stage”Kit
TD-15/RT-10K/BT-1
If you already have a Roland V-Drums kit, you can use the sound module and pads to design your own hybrid setup. You can practice at home on your V-Drums kit and take the components you need out on the road as part of a hybrid kit. You can expand your hybrid setup by adding triggers and BT-1 pads and connecting to your V-Drums module.
The ultimate hybrid setup
Advanced KitTD-30/SPD-30/SPD-SX RT-10 series/KT-10/KD-7 5×BT-1/PD-128S/CY-14C
By incorporating the TD-30 V-Drums sound module in your kit, you gain connectivity to a large number of RT-10 series triggers and pads, such as a V-Pad for the second snare, a second kick sound with a KT-10 pedal and many BT-1 pads. The OCTAPAD SPD-30 provides additional percussion sounds and a phrase loop function for further sound expression.
RT-10K
TM-2
RT-10K RT-10K
RT-10K
PD-128SCY-14C
BT-1
TD-30
KD-7
TM-2
RT-10S
RT-10K
TM-2
BT-1
BT-1
RT-10S
TM-2
SPD-30
Acoustic Drums: dw Collector's Standard Maple Series (Color: Twisted White Satin)
Acoustic Drums: Premier XPK Series (Color: Translucent Ruby Lacquer)
Acoustic Drums: dw Performance Series (Color: Candy Apple Red)
RT-10S KT-10
SPD-SXBT-1
There are no restrictions to Roland Hybrid drums.
TD-30 Drum Sound Module
SPD-SXSampling Pad
OCTAPAD SPD-30Digital Percussion
■Trigger inputs: 4■Dimensions: 541 (W) x 272 (D) x 88 (H) mm (21-5/16" x 10-3/4" x 3-1/2")■Weight: 3.8 kg, 8 lbs 7 oz (excluding AC adaptor)
Sound Module Drum Trigger
Pad
■Trigger inputs: 2■Dimensions: 135 (W) x 130 (D) x 59 (H) mm (5-3/8" x 5-1/8" x 2-3/8")■Weight: 360 g, 13 oz (excluding batteries and AC adaptor)
The sound module for drummers building a hybrid kit for the first timeThe button layout of the TM-2 is purposely simple and functional to make it easy to use, even for
drummers that have never incorporated electronic instruments into their playing before.
The LCD screen provides excellent visibility, even in live situations. There’s no need for power cables and
sockets-the TM-2 operates on 4 x AA Batteries (sold separately). It comes with over 100 carefully
selected, ready-to-play professional sounds that were designed specifically for hybrid kits, including
tones for enhancing drum sounds, percussion sounds to expand the range of instruments available in
your drum kit and even sound effects. The dual-trigger inputs allow you to assign individual sounds to
the head and rim of each pad or trigger, giving 4 different sounds from just two pads or triggers.
■Use your own, original soundsYou can also play original sounds stored on your SD card (WAV format) in
addition to the module's built-in sounds. Whether you’re triggering single-shot
percussion sounds, or triggering full backing tracks and songs the TM-2 allows
vast expansion of your sound range and possibilities.
■MIDI connectivity to other devicesThis TM-2 module features MIDI IN and MIDI OUT, giving you the ability to trigger
sounds from external modules such as computer software, synths and other
percussion modules. By connecting a single MIDI cable from the TM-2 to your
V-Drums module, you can also play your own sounds on your SD card from other
modules such as TD-15 and TD-30. This means drummers can now play their
own sounds using V-Drums kit by adding the TM-2.
TM-2 Trigger Module
■Trigger inputs: 15■Dimensions: 330 (W) x 258 (D) x 106 (H) mm (13" x 10-3/16" x 4-3/16")■Weight: 3.2 kg, 7 lbs 1 oz
■Extra Trigger inputs: 2■Dimensions: 154 (W) x 89 (D) x 225 (H) mm (6-1/16" x 3-9/16" x 8-7/8")■Weight: 685 g, 1 lbs 9 oz (excluding AC adaptor)
■Trigger inputs: 2 ■Dimensions: 364 (W) x 331 (D) x 94 (H) mm (14-3/8" x 13-1/16" x 3-3/4")■Weight: 2.5 kg, 5 lbs 9 oz (excluding AC adaptor)
Hundreds of drum and percussion sounds from around the world
An advanced sampling pad to perform your own sounds and audio
Roland flagship sound moduleThe TD-30 holds over 1,100 drum and percussion sounds
within, that perform with incredible sensitivity and a
dynamic range never before possible with electronic drums.
Fifteen trigger input jacks enable you to create a hybrid kit
that incorporates a wide variety triggers and pads. Players
can edit each of the sounds to incredible levels of detail
(including effects, EQ and compression), allowing you to
create the right tone to suit the music or the venue.
TD-15Drum Sound Module
Versatile module for performanceThe TD-15 has over 500 high-quality
and expressive sounds that it shares
with TD-30. The TD-15 allows two
external triggers or pads to be
connected. The internal FX engine
and sound editing possibilities make
it perfect for customizing your sound
and performing on the live stage.
The OCTAPAD holds 670 sounds that
are perfectly matched to acoustic
drums. These sounds have a wide
dynamic range, from soft to hard hits.
The phrase loop function, lets you
record, playback and loop your
performance, making it great for solo
performances on the live stage.
In addition to the eight built-in pads, you
can also connect up to four external
triggers or pads, allowing you to add or
replace your toms and cymbals in your
setup with an OCTAPAD.
You can sample your own sounds and load in your audio
tracks into the SPD-SX in a few simple steps, and play them
back your sounds by nine assignable pads. In addition to
playing back samples and backing tracks, the unit comes
with over 200 built-in sounds. You can also connect triggers
and pads to play samples and sounds from your kit.
BT-1 Bar Trigger Pad
Allows mounting of the SPD-30 and SPD-SX on an independent
stand, with height and angle adjustment.
PDS-10 Pad Stand
A multi-clamp to mount a TM-2 or sound module to a cymbal stand or other hardware.
The clamp allows versatile angle adjustment and flexible setup.
APC-33 All Purpose Clamp
These acoustic drum triggers attach to the drum hoop and send a signal to the sound module in response
to vibration-every time you play the drum head, a sound will trigger from the module. You can enhance
your kick sounds or add sounds to your snare and tom hits by mixing the acoustic sound with digital
sounds from the module to create innovative hybrid sounds. These triggers are robust, attach securely,
are easy to set up and can be adjusted to fit each drum. The RT-10S snare trigger is a dual trigger that
provides separate triggering for hits on your snare head and rim shots.
High-precision triggers for enhancing and layering soundsAcoustic Drum Trigger
■Trigger output: 1■Acceptable rod diameters: 8.0 to 12.5 mm (3/8" to 1/2")
■Trigger output: 1■Dimensions: 166 (W) x 440 (D) x 150 (H) mm (6-9/16" x 17-3/8" x 5-15/16")■Weight: 3 kg, 6 lbs 10 oz
PD-128S-BCV-Pad
CY-5Cymbal Pad
Ideal pad for second snareUsing a V-Pad as your second snare
opens the door to a wider range of sounds
and performance options. You can assign
a broad range of sounds to a pad,
from piccolo snares to deeper snares,
percussion sounds and more. You can
even assign different sounds to the head
and rim. This V-Pad is fitted with a tension
adjustable mesh head that gives you
the feel of hitting an acoustic snare drum.
Cymbal pads, perfect for your hybrid kit
These pads feature multiple-zone playing surfaces for ultimate playability. They
are ideal for splash cymbals, second rides, crashes, effects and more. They also
allow cymbal sounds to be changed from track to track, giving you a wide range
of authentic cymbals with just one additional cymbal pad.
A versatile Bar Trigger Pad that fits to acoustic drums and V-Pads The BT-1 is compact and yet is easy
to hit. It can be mounted in two
ways; you can attach to the tension
rod of a snare, tom or V-Pad
allowing it to be positioned to suit
your style, or can be mounted to
rods and tom arms.
A Kick Trigger Pedal offering realistic feelThe KT-10 is a new trigger pad that incorporates the pedal
board, beater and playing pad in one unit. The solid high-quality
pedal has spring tension adjustment and beater weight
adjustment allowing authentic technique with the convenience
of a low-profile all-in-one design. It’s even possible to place it
where space is limited. It’s never been easier to add a second
kick drum to your setup with the KT-10. Because it’s a trigger,
it can play any sound you want it to and even control functions,
such as start/stop of a track. KT-10 comes with a Mix In to
chain two units together for double bass setup.
■Trigger output: 2 (Head, Rim)■Acceptable rod diameters:9.0 to 13.0 mm (3/8" to 9/16")■Usable pipe size: 22.2 mm (7/8")
This is a compact 10” mesh pad that
allows attachment to rod or pipe type tom
holders
KT-10 Kick Trigger Pedal KD-7 Kick Trigger Unit
■Trigger output: 2 (Head, Rim)■Pad size: 12"
CY-14CV-Cymbal Crash
CY-8Cymbal Pad
■Trigger output: 1■Dimensions: 172 (W) x 112 (D) x 100 (H) mm (6-13/16" x 4-7/16" x 3-15/16")■Weight: 1.4 kg, 3 lbs 2 oz
This is a kick trigger unit that you can combine with your
favorite kick pedal. This unit, like KT-10, also comes with a
Mix In to chain two units together, as well as a special beater.
This is an 8.5-inch pad with a rubber
playing surface that supports rim shots.
■Trigger output: 2 (Head, Rim)■Acceptable rod diameters: 8.0 to 11.5 mm (3/8" to 1/2")■Size: CY-5=10", CY-8=12", CY-14C=14", CY-15R=15"
Combine sound modules, triggers, and pads in any way you like to make your own drum sound.Products for creating your own hybrid kit. For more detailswww.roland.com/V-Drums/
White
Black
Tom TriggerRT-10T
Snare TriggerRT-10S
Kick TriggerRT-10K
CY-15RV-Cymbal Ride
PDX-100 V-Pad
PD-8 Pad
SD card slot
MIDI connector
AC or Battery powered
■Usable pipe size: 10.5 to 28.6 mm (7/16" to 1-1/8")
■Height range: 643 to 1,093 mm (25-3/8" to 43-1/16")
■Trigger output: RT-10K=1, RT-10S=2 (Head, Rim), RT-10T=1■Guide for installation: [Rim height] RT-10K=30 to 36 mm (1-3/16" to 1-7/16"), RT-10S/RT-10T=11 to 15 mm (7/16" to 5/8"), [Rim thickness (max)] RT-10K=13 mm (9/16")
*Kick Pedal not included
TD-30 Drum Sound Module
SPD-SXSampling Pad
OCTAPAD SPD-30Digital Percussion
■Trigger inputs: 4■Dimensions: 541 (W) x 272 (D) x 88 (H) mm (21-5/16" x 10-3/4" x 3-1/2")■Weight: 3.8 kg, 8 lbs 7 oz (excluding AC adaptor)
Sound Module Drum Trigger
Pad
■Trigger inputs: 2■Dimensions: 135 (W) x 130 (D) x 59 (H) mm (5-3/8" x 5-1/8" x 2-3/8")■Weight: 360 g, 13 oz (excluding batteries and AC adaptor)
The sound module for drummers building a hybrid kit for the first timeThe button layout of the TM-2 is purposely simple and functional to make it easy to use, even for
drummers that have never incorporated electronic instruments into their playing before.
The LCD screen provides excellent visibility, even in live situations. There’s no need for power cables and
sockets-the TM-2 operates on 4 x AA Batteries (sold separately). It comes with over 100 carefully
selected, ready-to-play professional sounds that were designed specifically for hybrid kits, including
tones for enhancing drum sounds, percussion sounds to expand the range of instruments available in
your drum kit and even sound effects. The dual-trigger inputs allow you to assign individual sounds to
the head and rim of each pad or trigger, giving 4 different sounds from just two pads or triggers.
■Use your own, original soundsYou can also play original sounds stored on your SD card (WAV format) in
addition to the module's built-in sounds. Whether you’re triggering single-shot
percussion sounds, or triggering full backing tracks and songs the TM-2 allows
vast expansion of your sound range and possibilities.
■MIDI connectivity to other devicesThis TM-2 module features MIDI IN and MIDI OUT, giving you the ability to trigger
sounds from external modules such as computer software, synths and other
percussion modules. By connecting a single MIDI cable from the TM-2 to your
V-Drums module, you can also play your own sounds on your SD card from other
modules such as TD-15 and TD-30. This means drummers can now play their
own sounds using V-Drums kit by adding the TM-2.
TM-2 Trigger Module
■Trigger inputs: 15■Dimensions: 330 (W) x 258 (D) x 106 (H) mm (13" x 10-3/16" x 4-3/16")■Weight: 3.2 kg, 7 lbs 1 oz
■Extra Trigger inputs: 2■Dimensions: 154 (W) x 89 (D) x 225 (H) mm (6-1/16" x 3-9/16" x 8-7/8")■Weight: 685 g, 1 lbs 9 oz (excluding AC adaptor)
■Trigger inputs: 2 ■Dimensions: 364 (W) x 331 (D) x 94 (H) mm (14-3/8" x 13-1/16" x 3-3/4")■Weight: 2.5 kg, 5 lbs 9 oz (excluding AC adaptor)
Hundreds of drum and percussion sounds from around the world
An advanced sampling pad to perform your own sounds and audio
Roland flagship sound moduleThe TD-30 holds over 1,100 drum and percussion sounds
within, that perform with incredible sensitivity and a
dynamic range never before possible with electronic drums.
Fifteen trigger input jacks enable you to create a hybrid kit
that incorporates a wide variety triggers and pads. Players
can edit each of the sounds to incredible levels of detail
(including effects, EQ and compression), allowing you to
create the right tone to suit the music or the venue.
TD-15Drum Sound Module
Versatile module for performanceThe TD-15 has over 500 high-quality
and expressive sounds that it shares
with TD-30. The TD-15 allows two
external triggers or pads to be
connected. The internal FX engine
and sound editing possibilities make
it perfect for customizing your sound
and performing on the live stage.
The OCTAPAD holds 670 sounds that
are perfectly matched to acoustic
drums. These sounds have a wide
dynamic range, from soft to hard hits.
The phrase loop function, lets you
record, playback and loop your
performance, making it great for solo
performances on the live stage.
In addition to the eight built-in pads, you
can also connect up to four external
triggers or pads, allowing you to add or
replace your toms and cymbals in your
setup with an OCTAPAD.
You can sample your own sounds and load in your audio
tracks into the SPD-SX in a few simple steps, and play them
back your sounds by nine assignable pads. In addition to
playing back samples and backing tracks, the unit comes
with over 200 built-in sounds. You can also connect triggers
and pads to play samples and sounds from your kit.
BT-1 Bar Trigger Pad
Allows mounting of the SPD-30 and SPD-SX on an independent
stand, with height and angle adjustment.
PDS-10 Pad Stand
A multi-clamp to mount a TM-2 or sound module to a cymbal stand or other hardware.
The clamp allows versatile angle adjustment and flexible setup.
APC-33 All Purpose Clamp
These acoustic drum triggers attach to the drum hoop and send a signal to the sound module in response
to vibration-every time you play the drum head, a sound will trigger from the module. You can enhance
your kick sounds or add sounds to your snare and tom hits by mixing the acoustic sound with digital
sounds from the module to create innovative hybrid sounds. These triggers are robust, attach securely,
are easy to set up and can be adjusted to fit each drum. The RT-10S snare trigger is a dual trigger that
provides separate triggering for hits on your snare head and rim shots.
High-precision triggers for enhancing and layering soundsAcoustic Drum Trigger
■Trigger output: 1■Acceptable rod diameters: 8.0 to 12.5 mm (3/8" to 1/2")
■Trigger output: 1■Dimensions: 166 (W) x 440 (D) x 150 (H) mm (6-9/16" x 17-3/8" x 5-15/16")■Weight: 3 kg, 6 lbs 10 oz
PD-128S-BCV-Pad
CY-5Cymbal Pad
Ideal pad for second snareUsing a V-Pad as your second snare
opens the door to a wider range of sounds
and performance options. You can assign
a broad range of sounds to a pad,
from piccolo snares to deeper snares,
percussion sounds and more. You can
even assign different sounds to the head
and rim. This V-Pad is fitted with a tension
adjustable mesh head that gives you
the feel of hitting an acoustic snare drum.
Cymbal pads, perfect for your hybrid kit
These pads feature multiple-zone playing surfaces for ultimate playability. They
are ideal for splash cymbals, second rides, crashes, effects and more. They also
allow cymbal sounds to be changed from track to track, giving you a wide range
of authentic cymbals with just one additional cymbal pad.
A versatile Bar Trigger Pad that fits to acoustic drums and V-Pads The BT-1 is compact and yet is easy
to hit. It can be mounted in two
ways; you can attach to the tension
rod of a snare, tom or V-Pad
allowing it to be positioned to suit
your style, or can be mounted to
rods and tom arms.
A Kick Trigger Pedal offering realistic feelThe KT-10 is a new trigger pad that incorporates the pedal
board, beater and playing pad in one unit. The solid high-quality
pedal has spring tension adjustment and beater weight
adjustment allowing authentic technique with the convenience
of a low-profile all-in-one design. It’s even possible to place it
where space is limited. It’s never been easier to add a second
kick drum to your setup with the KT-10. Because it’s a trigger,
it can play any sound you want it to and even control functions,
such as start/stop of a track. KT-10 comes with a Mix In to
chain two units together for double bass setup.
■Trigger output: 2 (Head, Rim)■Acceptable rod diameters:9.0 to 13.0 mm (3/8" to 9/16")■Usable pipe size: 22.2 mm (7/8")
This is a compact 10” mesh pad that
allows attachment to rod or pipe type tom
holders
KT-10 Kick Trigger Pedal KD-7 Kick Trigger Unit
■Trigger output: 2 (Head, Rim)■Pad size: 12"
CY-14CV-Cymbal Crash
CY-8Cymbal Pad
■Trigger output: 1■Dimensions: 172 (W) x 112 (D) x 100 (H) mm (6-13/16" x 4-7/16" x 3-15/16")■Weight: 1.4 kg, 3 lbs 2 oz
This is a kick trigger unit that you can combine with your
favorite kick pedal. This unit, like KT-10, also comes with a
Mix In to chain two units together, as well as a special beater.
This is an 8.5-inch pad with a rubber
playing surface that supports rim shots.
■Trigger output: 2 (Head, Rim)■Acceptable rod diameters: 8.0 to 11.5 mm (3/8" to 1/2")■Size: CY-5=10", CY-8=12", CY-14C=14", CY-15R=15"
Combine sound modules, triggers, and pads in any way you like to make your own drum sound.Products for creating your own hybrid kit. For more detailswww.roland.com/V-Drums/
White
Black
Tom TriggerRT-10T
Snare TriggerRT-10S
Kick TriggerRT-10K
CY-15RV-Cymbal Ride
PDX-100 V-Pad
PD-8 Pad
SD card slot
MIDI connector
AC or Battery powered
■Usable pipe size: 10.5 to 28.6 mm (7/16" to 1-1/8")
■Height range: 643 to 1,093 mm (25-3/8" to 43-1/16")
■Trigger output: RT-10K=1, RT-10S=2 (Head, Rim), RT-10T=1■Guide for installation: [Rim height] RT-10K=30 to 36 mm (1-3/16" to 1-7/16"), RT-10S/RT-10T=11 to 15 mm (7/16" to 5/8"), [Rim thickness (max)] RT-10K=13 mm (9/16")
*Kick Pedal not included
Imagine your perfect drum sound. And then play it.
Roland Hybrid Drum Catalog 2014
Visit us online at www.roland.com/V-Drums/www.Roland.com
Roland, V-Drums, V-Hi-Hat, and V-Cymbals,are either registered trademarks or trademarks of Roland Corporation in the United States and/or other countries.
All specifications and appearances are subject to change without notice.Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.The photographs on the front cover and pages inside were taken at Shinjuku BLAZE (Tokyo, Japan).
It is forbidden by law to make an audio recording, video recording, copy or revision of a third party’s copyrighted work (musical work, video work, broadcast, live performance, or other work), whether in whole or in part, and distribute, sell, lease, perform, or broadcast it without the permission of the copyright owner.Do not use this product for purposes that could infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this product.
Bring hybrid versatility to your drum kit
Printed in Japan December, 13 RAM-4855 AD-3 JB-KB-SS