LEADERSHIP

Robert (Bobby) Bray Founder, President

Experience: 39 Years

Phillip Smith Vice President Business Development

Experience: 42 Years

Anthony (Tony) Sanders Vice President Operations

Experience: 43 Years

HWO AND SNUBBING SIGNATURE 340k UNIT

SBS Energy signature 340k units are designed and custom built to perform live and dead well interventions on both land & offshore.

ADVANTAGES • Utilized Offshore & Onshore • Environmentally Friendly • Experienced Well Control Personnel • Reduced Footprint • Efficient Mobilization / Demobilization • Eliminates the Need for Kill Fluids

SERVICES • Conventional Workovers • Completion/Recompletion • Fishing and Milling • Clean Out Operations • Plug & Abandonments • And Much More

HSE Our equipment meets or exceeds the safety standards of government agencies around the world. Participation of all personnel is required in safety drills, meetings and rig inspections, with documented follow up by management. All equipment and processes are designed and maintained with safety in mind. Our behavior based safety program is CHAMPS:

Communicating Hazards And Motivating Personal Safety

James Wurst HSE Manager Experience: 42 Years

SBS has produced this for general information only, and it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its contents, SBS in no way assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein. All applications for the material described are at the user’s risk and are the user’s responsibility

SBS Energy Services LLC, 985-303-1644 3413 West Park Avenue, Gray, LA 70359 USA

© 2018 SBS Energy Services. All rights reserved. SBS-F-180001.0

SNUBBING APPLICATIONS• Well control • Live well fishing jobs • Tubing clean-outs (barium/asphaltene/paraffin/sand) removal • Live well completions • Thru tubing fishing / milling • High pressure pumping • Damaged / leaking completion repair • Live well pressure milling • Packer & plug fishing • Installation of plugs, packers and liners • Under-balanced drilling • Perforating • Well killing • Gas storage caverns

WORKOVER APPLICATIONS• Completions / re-completions / tubing change-out (single / dual) • ESP change-outs • Gravel packs • Casing cutting • Plug & abandonment • Section Milling • Side tracking • Wash jobs • Straddle packers • Zone isolation • Pumping services • Spotting cement • Pipe recovery • Squeeze jobs

340k SpecificationsUnit type Stand Alone

Max pull capacity 340,000 lbs.Max push capacity 160,000 lbs.

Rotary/2 Speed Application 12,000/15,000/22,000 ft/lbs. Available Stroke 10' Stroke

Jack Bore Size 11" and 14” Thru Bore Available Pipe range 2 to 12 "

Gin pole 38-60 ft Height

Pipe Handling Failsafe/Counter Balance Winch: 1500lbs Rated Failsafe/Utility Winch: 10,000lbs Rated

Work window 6' Inside Height 14” and 21 ¼” Through Bore

Power slips Hydra Rig Slip BowlsPower tongs Third Party Rental

Rated working pressure 5k 10k and 15k BOPs and Circulating System Available

Heaviest Lift HPU 22,000 lbs.