HVAC Schedule Optimization - Automated Logic
Transcript of HVAC Schedule Optimization - Automated Logic
Next level building automation engineered
to help you make smart decisions.
AUTOMATED LOGIC WE MAKE BUILDINGS BETTER. All trademarks used herein are the
property of their respective owners.
© 2020 Carrier
All rights reserved
1150 Roberts Boulevard, Kennesaw, Georgia 30144770-429-3000 | www.automatedlogic.com
04202020
HVAC Schedule OptimizationAdvanced Security Add-on for the WebCTRL® System
Part# ADD-OG-AOS
The HVAC Schedule Optimization
Advanced Security Add-on for the
WebCTRL System uses the Lenel®
OnGuard® badge reader data to track
historical occupancy trends, and then
predicts future facility occupancy levels.
This information is then used by the
WebCTRL system to automatically adjust
zone and building schedules, optimizing
energy usage and operational efficiency.
Key Features and Benefits
• Optimal Start Coupling - Ensures comfort at
typical occupancy, and covers “early birds”.
• Rolling Average by “Day of Week”- Evaluates
each day of the week separately to account for
daily variances.
• Dynamic Assessment - Responds to changes in
occupancy profiles over time.
• Exception Handling - Analyzes data for unusual
occupancy patterns such as holidays and discards
them to avoid influencing predictions.
Compatibility
• WebCTRL v6.5 or newer
• OnGuard version must be:
• v7.0 or later if using DataConduIT interface
• v7.4 or later if using OpenAccess interface
Requires
• OnGuard Data Connector (ADD-OG-DIP)
Collect Access Data Trend > Analyze > Predict Execute Optimized Schedule
HVAC Schedule Optimization Add-on