HUNTSMAN - b2bcomposites.com · Araldite 2021 Resin Huntsman Advanced Materials Americas Inc. (EL)...
Transcript of HUNTSMAN - b2bcomposites.com · Araldite 2021 Resin Huntsman Advanced Materials Americas Inc. (EL)...
Huntsman Advanced Materials Americas' Inc.
P.O. Box 4980
The Woodlands, TX 77387-4980
8 am toS pm Phone: (800) 2S7-SS4724-Hour Emergency Phone: (800) 328-8S01International Emergency Phone: (409) 727-0831Asia Pacific Emergency Phone: (6S) 6336-6011
Effective Date: 7/12/07 Material Safety Data Sheet
HUNTSMANEnriching lives through innovation
MSDS No: 33713
1. PRODUCT IDENTIFICATION
Trade Name: Araldite 2021 Resin
Chemical Family: Acrylate
Intended Use or Product Type: Adhesive resin component
2. COMPOSITION / INFORMATION ON INGREDIENTS
NFPA RATING
Health:2*
Flammability:
3
Reactivity:
1
Personal ProtectIOn:
HMIS RATING
0 CAS No. CHEMICAL IDENTITY EXPOSURE LIMITSCARCINOGENS
STATUS
HACGIHOSHAMFR.IARCNTPOSHA
ATWASTELPELSTEL
*80-62-6 2- Propenoic Acid, 2-Methyl-,100NE100NENENRNRNR
Methyl Esterppmppm
CommonMethyl methacrylate
Name: Concentration30.00 - 60.00 % by wt
*79-41-4 2- PropenoicAcid, 2-Methyl-20 ppmNENENENENRNRNR
CommonMethacrylic acid
Name: Concentration5.00 - 10.00% by wt
* = OSHA Hazardous Ingredient
3. HAZARDS IDENTIFICATION
Emergency Overview: Flammable. Causes irritation if inhaled and can cause skin irritation, eye irritation, and allergic skinreaction. May be harmful if absorbed through skin or if swallowed.
Primary Route(s) of Entry: Dermal; heated product may produce inhalable vapors.
Chronic: Overexposure may have effects on heart, lungs, kidney, and liver.
4. FIRST AID MEASURES
Printed: 7/24/2007 Page 1 of 6
Effective Date: 7/12/07Araldite 2021 Resin Huntsman Advanced Materials
Americas Inc. (EL)
Ingestion: Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
unconscious person. Seek immediate medical attention.
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Destroy contaminatedshoes. Seek immediate medical attention.
Inhalation: Remove to fresh air. Seek immediate medical attention.
Eyes: Immediately flush eyes with water for at least 15 minutes. Seek immediate medical attention.
Overexposure Effects: Causes irritation if inhaled and can cause skin irritation, eye irritation, and allergic skin reaction. May be
harmful if absorbed through skin or if swallowed.
Medical Conditions Aggravated by Exposure: Skin, eye and pulmonary conditions.
Additional Information: Referral to a physician is recommended if there is any question about the seriousness of any injury.
5. FIRE FIGHTING MEASURES
Flash Point:Flash Point Method Used:Flammable Limits in Air (Lower - % by volume):Flammable Limits in Air (Upper - % by volume):
50°F (10°C)TCC2.112.5
Fire Fighting Extinguishing Media: Carbon dioxide, dry chemical, foam, water.
Fire Fighting Equipment: Use self-contained breathing apparatus.
Fire and Explosion Hazards: Decomposition and combustion products may be toxic.
6. ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Remove spillage by absorbing in absorbent material.
7. HANDLING AND STORAGE
Signal Word: Warning!
Precautions: Flammable liquid. Keep away from heat, sparks, and flame. Keep container closed when not in use. Use with
adequate ventilation. Causes irritation if inhaled and can cause skin irritation, eye irritation, and allergic skin reaction. May beharmful if absorbed through skin or if swallowed. Avoid breathing vapor or mist. Avoid contact with eyes, skin, and clothing.
Avoid tasting or swallowing. Keep container closed when not in use. Use with adequate ventilation. Wash thoroughly after
handling. Notice! Overexposure may have effects on heart, lungs, kidney, and liver.
Other Handling Information: Nuisance dust may be generated when sanding or sawing cured material.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Printed: 7/24/2007 Page 2 of 6
Effective Date: 7/12/07
Skin Protection: Wear impermeable gloves.
Araldite 2021 Resin Huntsman Advanced MaterialsAmericas Inc. (EL)
Respiratory Protection: Use NIOSH approved organic vapor cartridge respirator when vapor/mist exposure is likely.
Eye Protection: Wear splash-proof chemical goggles.
Engineering Controls: General mechanical and local exhaust in accordance with ACGIH recommendations.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color:Odor:Physical State:Solubility in Water:Viscosity:Vapor Pressure:Specific Gravity:Boiling Point:Melting Point:Evaporation Rate:Density:Vapor Density:pH:Coefficient of water/oil:
Percent Volatile: Not determined.
10. STABILITY AND REACTIVITY
Off WhiteVaried fragant odorPasteNot DeterminedNot Evaluated
28 mm Hg at 68°P (20°C)1.03 (water = I)213°F (101 0c)Not Determined
3 (Butyl Acetate = I)Not Determined
> I (Air = I)Not DeterminedNot Determined
Conditions to Avoid: Excessive heat for prolonged periods oftime.
Stability: Stable.
Incompatibility: Strong oxidizers, acids and bases.
Hazardous Decomposition Products: Combustion may form toxic materials, such as carbon dioxide, carbon monoxide.
Hazardous Polymerization: Will not occur.
11. TOXICOLOGICAL INFORMATION
Acute Oral Effects (LDSO): Component(s) are slightly toxic, 500 - 5000 mg/kg (rat).
Acute Dermal Toxicity (LDSO): Component(s) are slightly toxic, 1000 - 2000 mg/kg (rabbit).
Acute Inhalation Exposure Effects: Respiratory irritant.
Sensitization: Possible in susceptible individuals.
Skin Irritation: Irritant.
Printed: 7/24/2007 Page 3 of 6
Effective Date: 7/12/07
Eye Irritation: Irritant.
12. ECOLOGICAL INFORMATION
13. DISPOSAL CONSIDERATIONS
Araldite 2021 Resin Huntsman Advanced Materials
Americas Inc. (EL)
Waste Disposal Method: Consult qualified local or corporate personnel for method that will comply with local, state and federalhealth and environmental regulations.
14. TRANSPORT INFORMATION
DOT: Non-Bulk
Proper Shipping Name:Hazard Class:ID Number:
Packing Group:Label:
lATA: Non-Bulk
Proper Shipping Name:Hazard Class:ID Number:
Packing Group:Label:
IMDG: Non-Bulk
Proper Shipping Name:Hazard Class:ID Number:
Packing Group:Label:
TDG: Non-Bulk
Proper Shipping Name:Hazard Class:ID Number:
Packing Group:Label:
15. REGULATORY INFORMATION
Adhesives3UN 1133PG II
Flammable liquid
Adhesives3
UN 1133PG II
Flammable liquid
Adhesives3UN 1133PG II
Flammable liquid
Adhesives3UN 1133PG II
Flammable liquid
US Federal Reeulations:
Occupational Safety and Health Act (OSHA): This Material Safety Data Sheet (MSDS) has been prepared in compliance withthe federal OSHA Hazard Communication Standard 29 CFR 1910.1200. This product is considered to be a hazardous chemicalunder that standard.
Resource Conservation and Recovery Act (RCRA): D 001 ignitable.
Printed: 7/24/2007 Page 4 of 6
Effective Date: 7/12/07Araldite 2021 Resin Huntsman Advanced Materials
Americas Inc. (EL)
SARA Title III: Section 313 Toxic Chemical List (TCL): This product contains a toxic chemical(s) for routine annual toxicchemical release reporting under section 313 (40 CFR 372). This information must be included in all MSDS's copied or distributedfor this material.
Chemical Name: 2- Propenoic Acid, 2-Methyl-, Methyl EsterCommon Name: Methyl methacrylatePercent in Composition: 30 - 60 % by wtComment:
TSCA Section 8(b) - Inventory Status: All chemical components of this product are in compliance with TSCA inventoryrequirements.
TSCA Section 12(b) - Export Notification: This product does not contain any chemical(s) that are subject to a Section 12(b)export notification.
International Re2ulations:
Canadian Inventory Status: This product contains one or more chemicals currently not on the Canadian Domestic SubstanceList.
Canadian WHMIS: This product has been classified in accordance with the hazard criteria of the Controlled Products Regulationsand the MSDS contains all the information required by the Controlled Products Regulations. B2, D2B
State Re2ulations:
California Proposition 65: This product does not contain any chemicals currently on the California list of Known Carcinogensand Reproductive Toxins.
Pennsylvania Right-to-Know: The following is required composition information:
Chemical Name: 2- Propenoic Acid, 2-Methyl-, Methyl EsterCommon Name: Methyl methacrylateCAS Number: 80-62-6Comment: Environmental Hazardous Substance
Chemical Name: Adhesive Resin
CAS Number: Held confidential by our supplierComment: Not on Pennsylvania Hazardous Substance List
Chemical Name: 2- Propenoic Acid, 2-MethylCommon Name: Methacrylic acidCAS Number: 79-41-4Comment: Hazardous Substance
16. OTHER INFORMATION
MSDS No:
Approved By:Title:
Printed: 7/24/2007
33713
Dianne BlessingEHS Specialist
Page 5 of 6
Effective Date: 7/12/07Araldite 2021 Resin Huntsman Advanced Materials
Americas Inc. (EL)
Disclaimer: The information and recommendations contained herein are based upon tests in controlled laboratory conditions, arebelieved to be correct, and are provided for the sole purpose of hazard communication as part of Huntsman's product safetyprogram. This product has not been tested for, and therefore is not recommended or suitable for, uses for which prolonged contactwith mucous membranes, abraded skin, or blood is intended or likely, or for uses for which implantation within the human body isintended, and Huntsman assumes no liability for any such uses.
The information and recommendations contained herein are not intended to constitute performance information concerning theproduct, which is available in separate technical data sheets available from Huntsman upon request. Users are urged, and are urgedto urge others who may come in contact with the product, to obtain and consult data sheets prior to purchase, use, transportation orstorage of the product.
HUNTSMAN MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY, QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. HUNTSMAN'S LIABILITY ISSTRICTLY LIMITED TO REIMBURSEMENT OF BUYER'S PURCHASE PRICE, OR IN HUNTSMAN'S DISCRETIONREPLACEMENT, OF THE PRODUCT IN RESPECT OF WHICH SUCH CLAIM IS MADE. HUNTSMAN'S LIABILITY ISSTRICTLY LIMITED BY LEGAL NOTICES IN TECHNICAL DATA SHEETS, PRODUCT LITERATURE, AND/OR SALEDOCUMENTS. The foregoing DISCLAIMERS and LIMIT ATION OF LIABILITY supercede inconsistent or contradictoryprovisions in Buyer's documents.
USER SHOULD CONSULT A LEGAL ADVISOR OR THE APPROPRIATE GOVERNMENTAL AGENCY TO DETERMINETHE APPLICABILITY OR EFFECT OF ANY LAW OR REGULATION WITH RESPECT TO THE PRODUCT. HUNTSMANDOES NOT UNDERTAKE TO FURNISH ADVICE ON SUCH MATTERS.
NO PERSON OR ORGANIZATION EXCEPT A DULY AUTHORIZED HUNTSMAN EMPLOYEE IS AUTHORIZED TOPROVIDE OR MAKE AVAILABLE DATA SHEETS FOR HUNTSMAN PRODUCTS. DATA SHEETS FROMUNAUTHORIZED SOURCES MAY CONTAIN INFORMATION THAT IS NO LONGER CURRENT OR ACCURATE. NOPART OF THIS DATA SHEET MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM, OR BY ANY MEANS,WITHOUT PERMISSION IN WRITING FROM HUNTSMAN. ALL REQUESTS FOR PERMISSION TO REPRODUCEMATERIAL FROM THIS DATA SHEET SHOULD BE DIRECTED TO HUNTSMAN, MANAGER, PRODUCT SAFETY ATTHE ABOVE ADDRESS.
Printed: 7/24/2007 Page 6 of 7