Mining DivisionProviding pumping solutions to the Mining Industry

> www.hunterpumps.com> www.hunterpumps.com

Hunter Pumps Sales & Service Pty Ltd is a family operated and owned business operating since 1995. We are a key supplier to the Commercial, Industrial, Mining and Civil Sectors.

At Hunter Pumps we supply and manufacture a large range of pumping units that can be selected “off the shelf” or designed and customized in our Edgeworth workshop to the highest engineering standards. We work closely with engineers and designers to provide our clients with the solutions they need.

Our Mining division is dedicated to providing you with the best possible solution to your problem, with the least damage to the environment and maximum protection to the personnel involved in the workplace.

Our commitment to:• Quality• Customer Satisfaction• Technical Expertise• Innovation

Providing our clients with the best pumping solution for their needs.

2

Water Supply Pump Units

3

Hunter Pumps water supply pump units can be designed and manufactured to your every need. They have been successfully designed and installed on various large mine sites and industrial applications. Some of the areas where our systems have been supplied include:

• Bath house applications

• Dust suppression systems

• Gland supply pump systems

• Potable water supply units

• Underground machinery supply pump-stations

• Fire Fighting applications

These pump systems can be designed in any confi guration required, and are complete with all valves, stainless steel pipework and variable speed confi gurations, for the easiest possible installation when delivered to site.

Hunter Pumps centrifugal water pump units come in a variety of confi gurations & sizes to suit your application.

From general water transfer to high pressure gland seal applications, Hunter Pumps has the range to suit.

Our pump units can be manufactured in anything from cast iron to duplex stainless steel to suit the product being pumped and are available in a variety of styles including:

• Self priming

• Back pull out

• Close coupled

• Long coupled

• Split case

• Inline booster

The pump impellers are also specifi cally designed to suit their application with vortex impellers, slurry handling, open and super vortex impellers available in any material.

Centrifugal Water Pump Units

Self priming > specifi cally designed > variety of styles > vortex impellers

4

The pump impellers are also specifi cally designed to suit their application with vortex impellers, slurry handling, open and super vortex impellers available in any material.

Hunter Pumps fi re protection pumps are designed to cope with whatever your requirement demands.

These pump systems can be designed in any confi guration required, and are complete with all valves and pipework for the easiest possible installation when delivered to site.

All pump sets can be designed & manufactured in any confi guration, be it electric with diesel back-up, electric with generator back-up or stand alone diesel.

These units fully comply with Australian Standard 2941 and are factory tested in our test bay to customer requirements.

All pump units come complete with roll groove manifolds, to allow for installation as quickly and as easily as possible on site.

We can also manufacture and supply:

• Suction & booster assembly’s

• Pressure jacking pump sets

• Pressure relief valves

• Annubar test points

Hunter Pumps has a complete in-house design team able to completely design your system and suit all your on-site requirements.

Fire Protection Pump Units

Factory tested > electric or diesel > in-house design > complete with roll groove manifolds

5

Hunter Pumps range of slurry dewatering pumps are the very best at what they are designed to do.

The slurry dewatering range can handle from as small as 1 L/sec with a head of 70 metres to as big as 1200L/sec with a head of 50 metres in the 20 x18 pump series.

The durability and wear resistance of the pumps wear parts will result in cost savings and less downtime.

Being centrifugal slurry handling pumps, they have the ability to pump larger objects through the system reducing the danger of the pump failing during operation.

If the job requires pumping acidic or caustic substances there are special coatings & castings available to suit.

All spare parts are readily available, such as impellers, liners, bearing assemblies & mechanical seal kits off the shelf in most instances and are interchangeable with other brands.

Slurry Dewatering

Complete range > less downtime > spare parts > centrifugal

6

Powerful handling of heavy duty slurry applications.

• High Chrome and CD4 as standard

• Capacities to 333L/S

• Heads up to 320m

• Patented Impeller release mechanism

• Patented externally adjustable wear ring

• Increased wall thickness for additional wear availability

• Increased effi ciencies in state of the art slurry pump design

• Front and back pull out design

• Three series available (Low Head -’LH’, High Head -’HH’ & Mine Dewatering -’MD’)

Four DBH 125/100 MDHM, 250 HP are used in two independent systems (inline confi guration) for this mine dewatering application.

This arrangement allows for double fl ow in peak periods. The pumps are reverse overhead motor mounted and have been running successfully for 2 years with no hard metal wear parts required.

High Head Slurry Pump Systems

7

Submersible Dewatering

Submersible dewatering pumps

Submersible dewatering pumps are suitable for pumping dirty water. The pumps have low weight and compact design for convenient transport, handling and installation. The plug-in start enables quick start-up on site, and motor protection eliminates the risk of overheating. The modular design with interchangeable spare parts makes service easy and increases fl exibility.

The submersible slurry pumps are electric submersible centrifugal pumps designed for pumping abrasive and high density slurries in Mining, Heavy Industry, Civil construction and municipal applications.

Flowrate up to 670l/S

Head Up to 65m

Max Solid Size to 60mm

Discharge to 400mm

Motor Sizes 7.5-315KW

Submersible Slurry Pumps

Motor Size 0.5-70KW

Flow Max: 1220m3/h

Head Max: 101m

Application Areas

• Construction Sites

• Sewage by-pass

• Infrastructure

• Tunneling

• Flood Control

• Dredging

• Stone Cutting

• Irrigation

• Open Quarries

• Rescue Pumping

• Fire Fighting

8

Hunter Pumps diesel surface dewatering pumps are well known throughout the mining industry.

The diesel units can pump anything up to 12,000LPS and heads of up to 225m.

With exceptional engineering and quality the pumps require less service and downtime meaning an increase in productivity and profi t.

The pumps are designed to be environmentally friendly; this means that there are preventative systems in place for leakages and carry over while not compromising the reliability of the pump. Fully contained units have been designed up to 110% containment level and have a reading of only 60dBA, meeting noise containment regulations.

Our mine dewatering series are built to all the mining standards both mechanically and electrically, and come with your choice of diesel motor, be it Cummins, Detroit, Cat, Yanmah etc. All pumps are available with a number of optional extras, so be sure to give us a call today to discuss your needs on 1800 092 210.

Diesel Dewatering

Dewatering Pumps are also available for hire.

9

Dewatering Pump Pods

Hunter Pumps dewatering pump pods are designed to meet the need of every individual mine site.

Hunter Pumps portable pump pods range from 1000 litres to 10,000 litres. These pump pods can be fi tted with either internal or external pumps, depending on your requirements.

Hunter Pumps pump pods can be fi tted with any lift ing points including forklift access, QDS lift ing attachments, and towing hitch.

Before going onsite the pump pods are rigorously tested for stability for the safety of those that are operating the equipment and others in the vicinity.

Our design team can ensure that your vision becomes a reality.

Individual design > tested for safety > fi tted with lift ing points > designed for you

10

Trailer mounted option available> contact our design team on 1800 092 210 for further information.

When it comes to pontoon pump stations, Hunter Pumps are capable of designing and manufacturing your complete pontoon pumping system.

Our large pontoons can be manufactured with all access walkways, fl oor gratings, cable tray, handrails and all lift ing and fi xing points to suit.

Our smaller range is custom built to suit the individual pump, be it a submersible, centrifugal style or column pump. All pumps can be designed either submerged or self priming.

Hunter Pumps has also been involved in sludge/slurry removal from dams using our unique pumping systems and these have proven very cost eff ective. For any application our design team can meet with you to discuss your requirements.

With your safety and the environment in mind, all designs are produced to the highest relevant standards to ensure complete customer satisfaction.

Pontoon Pump Stations

Custom made > cost eff ective > environmentally friendly > submerged or self primed

11

Bore Hole Pump Units

Hunter Pumps have only the best when it comes to submersible bore hole pump installations.

Lowering your costs is how Hunter Pumps operates. To do this we have bore hole pumps that are made of all diff erent materials including corrosion resistant stainless steel, bronze and marine grade stainless steel, so that the pumps can be used in any application. Using the correct material means less wear to the pump resulting in less downtime and servicing costs.

The pumps can pump up to 400 L/second with heads that range from 20 metres to 480+ metres.

Hunter Pumps can also mount these pump units to pontoons. This involves a bore hole pump attached to the frame of a pontoon which will suit high head dewatering applications. (See Pontoon Pump Station section)

Be sure to ask our experienced team for assistance.

12

Supply, install, repair > corrosion resistant > less downtime > less wear

Air Operated Diaphragm Pumps

13

Hunter Pumps’s Wilden range of air operated pumps and systems are recognised worldwide.

They are made from cast iron or polypropylene and utilise neoprene and numerous other elastomers. They are approved for use in underground mines.

These pumps are designed to cope with fl ow rates of up to 1174 L/Min, suction lift of 9.5 metres wet or 7.6 metres dry, and discharge capabilities of over 80 metres.

Pumping corrosive substances or slurrys are not a worry for these types of pumps with their highly resistant elastomers and solids handling capabilities.

Hire units and test pumps are readily available for your needs, whatever they may be.

Any questions that you have feel free to contact one of our friendly staff to help guide you through the solution to your problem.

Wide Range > cast iron or polypropylene > quality control testing > underground approved

Hunter Pumps only use helical rotor pumps that have been proven in service over many years, with a range of diff erent abrasive substances pumped and have exceeded their expected life span.

The helical rotor pumps that Hunter Pumps use have only the best quality parts and highest standard of workmanship.

Helical rotor pumps are seen at their best when there is a high head to pump, or when there is a substantial quantity of slurry or sludge to be moved.

These pumps can be coupled to both air and electric motors to suit the pump application and your need.

They have the capacity to pump up to 500+ metres vertically from pit bottom in underground mining applications.

Be certain to call us so we can assist you with your inquiry and your design.

Helical Rotor Pumps

Hunter Pumps vehicle wash units are designed to take the manual labour out of washing mine vehicles both small and large by the use of automation.

Automation is the key to time effi ciency and power saving.

Hunter Pumps product has been tested and proven in many situations in the mining industry.

These units also have a water recycle program so that water is not wasted and so the sediment that comes from the wash is discharged in an environmentally friendly way.

Our service team is always available to assist with any adjustments, breakdown or advice - 24/7.

Light/Heavy Vehicle & Train Wash Units

Train Wash Units > power saving > increases effi ciency > saves water > key to time effi ciency

14

Portable Wheel Wash Systems

15

Hunter Pumps can help you with your Portable Wheel Wash System needs. Contact one of our friendly sales staff on 1800 092 210 to discuss and then we can begin to confi gure the correct system for your site.

We do off er installation confi gurations that range from totally portable above ground systems to permanent systems that are set in concrete.

Providing solutions for:

• Construction Sites

• Mining Operations

• Landfi lls

• Energy Facilities and other Industrial applications

• Portable or permanent systems available

121'-2.500"

igh PressureHigh PressurePrep Stations

Filtration System

Applicator PumpAnd Solution StationAnd Solution Station

Hi h P HOMAHigher Pressure HOMA Heavy Duty Submersible Pumps

S C T kScraper Conveyor Tanks

High Pressure Curtain Rinse

Air Cannon Dryer SystemAir Cannon Dryer System

Applicator

A li tApplicator

Applicator

Hunter Pumps range of polyethylene products provide you with systems of the highest quality, integrity and innovation.

Combining quality and service, we provide you with a purpose designed piping system that is well worth your investment.

Hunter Pumps has a complete qualifi ed team of poly pipe installers that can supply and install your pipe-line in any length, size and layout.

Hunter Pumps has always good stocks of all required pipe & pipe fi ttings including:

• Tees

• Elbows (S/R and L/R)

• Butt-weld fl anges

• Backing rings

• Electrofusion

With our express delivery service we will have it to you in no time at all.

Poly Pipe And Fittings

Non Corrosive > installation available > increases effi ciency > same day delivery

16

Victaulic Pipe And Fittings

17

Hunter Pumps use only the best quality piping when it comes to victaulic pipe and fi ttings.

Known worldwide for its simple but reliable design the victaulic pipe incorporates the best quality for both rigid and fl exible joints.

Fittings can be both bolted or toggled to allow permanent fi xing and quick access. This system covers from 25mm to 400mm in the standard 2 part couplings.

Hunter Pumps stocks both the shouldered & roll grooved range of pipes, valves and fi ttings. We also manufacture any specialist requirements such as pressure reduction stations, suction and booster brigade hydrants, to all relevant standards.

Our specialist range of valves can be supplied and installed to any requirements, so be sure to ask us how.

Hunter Pumps can provide effi cient and economical solutions to your pneumatic problems.

Hunter Pumps have the complete range of air piping and fi ttings. Chemical resistant, mine approved and superior strength are just three of the many positives about our products.

With new ways to get air from A to B being introduced all the time, Hunter Pumps keep up to date with the latest advancements so as to inform you of progress made including our aluminium range.

With these systems in your work shop, your air powered equipment will be running better than ever before. Fast, reliable and easy to fi t systems also cut the cost on installation.

Once a system is in place you will fi nd that there is little to no maintenance needed to keep it in working order. These systems also help to stop moisture build-up, so that your machinery doesn’t get water inside vital parts and bring your time effi ciency down.

Special advice and onsite guidance is available from our friendly team at Hunter Pumps.

Air Pipe and Fittings

Graco Lubrication And Fluid Handling

18

Hunter Pumps believes in the most effi cient workplace and this is only achieved if everything is running smoothly.

For keeping a company running in smooth working order you need the workshop to be kept clean and to function at 100%. To achieve this, ask us how we can assist to design the best setup for your workshop. Our range includes air diaphragm pumps, complete lubrication stands with reels and all attachments to suit. These can be set up both inside and outside and are tailored to your specifi c requirements.

Hunter Pumps also design & manufacture underground lubrication pods to keep your underground machinery at the coal seam.

Hunter Pumps maintain an ample stock of the Graco product, so that if you need it urgently we have it here.

Hunter Pumps have a wide range of hose and connectors available to you.

Our range incorporates everything from all hose fi ttings, hose assemblies, pipe, pipe fi ttings, valves, fi re protection, petroleum and specialty fi ttings.

All hoses and fi ttings are manufactured to the highest of standards so you can achieve the highest possible life span to reduce downtime.

All hoses to be used in underground coal mines are certifi ed to relevant standards to ensure the highest of safety standards on your site.

Hose and Connectors

URGENT WORK IS OUR SPECIALITYWhether it is for an urgent onsite call or service from our warehouse, our competent service team is dedicated to providing economical repairs or replacement.

Comprehensive range of pumps & spare partsBacked by a comprehensive range of pumps and spare parts, you can be guaranteed that we’ll fi nd a solution to suit your needs.

At Hunter Pumps we provide FREE technical advice on the correct selection of pumps to suit your specifi c application.

Fully equipped workshopOur fully equipped workshop with test facilities is available to solve all your mechanical plant repair and maintenance requirements.

Providing solutions and satisfying your demands of decreased downtime while getting you back on track without delay is our forte.

Spare Parts and Service

Miscellaneous

Oil Gear Pumps

Gear Pumps Chemical Dosing Pumps Peristaltic Hose Pumps

Mechanical Diaphragm Pumps Specialised Pump Builds

19

Water Supply Pump Units

Fire Protection Pump Units

Pontoon Pump Stations

Dewatering Pump Pods

Slurry Dewatering

Centrifugal Water Pump Units

Bore Hole Pump Units

Diesel Dewatering Pump Units

Submersible Dewatering Pump Units

Light/Heavy Vehicle & Train Wash Units

Helical Rotor Pump Units

Air Operated Diaphragm Pumps

Poly Pipe And Fittings

Lubrication And Fluid Handling

Victaulic Pipe And Fitting

Hose And Connectors

Air Pipe And Fittings

Specialist Piping Systems

Contact Hunter Pumps for all your pumping requirements:

PO Box 45 Cardiff NSW 2285P 1800 092 210E sales@hunterpumps.com www.hunterpumps.com