Huawei Rnc Commands and Details

RNC COMMANDS AND DETAILS

Version information (LST VER)

-------------------

Product version = BSC6810V200R010ENGC01

List RNC System Information (LST SYS)

---------------------------

System description = Type A2

System ID = 1

Contact mode of the manufacturer = <NULL>

System Location =

System services = CS and PS

List RNC Internal Subnet No (LST SUBNET)

---------------------------

Subnet No. = 80

Debugging Subnet No. = 192

List Time Zone And Daylight Saving Time Information (LST TZ)

---------------------------------------------------

TimeZone = GMT+05:30

DaylightSave = NO

BAM server state (DSP BAM)

----------------

Subrack No = 0

Slot No = 23

Computer name = BAM503_LEFT

Internal network fixed IP =

External network fixed IP =

Operational state = Active normal

Version = BSC6810V200R010ENGC01

Subrack No = 0

Slot No = 21

Computer name = BAM503_RIGHT

Internal network fixed IP =

External network fixed IP =

Operational state = Standby normal

Version = BSC6810V200R010ENGC01

(Number of results = 2)

Other state

-----------

Internal network virtual IP =

External network virtual IP =

Internal network virtual IP state = Normal

External network virtual IP state = Normal

Data-sync state = Data synchronization is successful

Internal network link state = Normal

External network link state = Normal

Backup network link state = Normal

***************************************

Active BAM modules state (DSP BAMMODULE)

------------------------

Service Name State Startup Type

SNTP Server Started Automatic

SNTP Client Started Automatic

FTP Server Started Automatic

DynMonitor Started Automatic

Load Started Automatic

Warn Started Automatic

Performance Started Automatic

Maintain Started Automatic

Dataman Started Automatic

MML Server Started Automatic

Exchange Started Automatic

FTP Client Started Automatic


Standby BAM modules state

-------------------------

Service Name State Startup Type

SNTP Server Stopped Disabled

SNTP Client Started Automatic

FTP Server Started Automatic

DynMonitor Started Automatic

Load Stopped Disabled

Warn Stopped Disabled

Performance Stopped Disabled

Maintain Stopped Disabled

Dataman Stopped Disabled

MML Server Stopped Disabled

Exchange Stopped Disabled

FTP Client Started Automatic

*************************************

Active BAM state(CPU&MEM) (DSP BAMSRV)

-------------------------

CPU(%) = 23%

MEM(%) = 26%


Active BAM state(Logical harddisk)

----------------------------------

Logical harddisk = C:\

Total space(M) = 14998

Free space(M) = 10252

Free space(%) = 68%

Logical harddisk = D:\



Free space(%) = 85%

Logical harddisk = E:\



Free space(%) = 100%


Standby BAM state(CPU&MEM)

--------------------------

CPU(%) = 0%

MEM(%) = 15%


Standby BAM state(Logical harddisk)

-----------------------------------

Logical harddisk = C:\



Free space(%) = 68%

Logical harddisk = D:\



Free space(%) = 89%

Logical harddisk = E:\



Free space(%) = 100%

(Number of results = 3)***********************************

%%LST ASWPARA:;%%

RETCODE = 0 Execution succeeded.

BAM automatic switchover parameters

-----------------------------------

Switch of BAM automatic switchover = ON

BAM automatic switchover interval = 90 day

Active BAM start date = 2010-09-13

Target automatic switchover date = 2010-12-12

********************************************************************

%%LST BAMAREA:;%%


Active BAM workarea information

--------------------------------

Workarea flag = VersionA

Mainarea version = BSC6810V200R010ENGC01

Standbyarea version = Not installed


Standby BAM workarea information

--------------------------------

Workarea flag = VersionA

Mainarea version = BSC6810V200R010ENGC01

Standbyarea version = Not installed

***************************************************

%%CHK PEERCFG:;%%


Active BAM

-----------

Configure item Checked result Configure value

Configure peer computer name Consistent bam503_right

Configure peer internal network fixed IP Consistent

Configure peer external network fixed IP Consistent

Internal network virtual IP Consistent

External network virtual IP Consistent

Computer name Consistent bam503_left

Internal network fixed IP Consistent

External network fixed IP Consistent


Standby BAM

------------

Configure item Checked result Configure value

Configure peer computer name Consistent bam503_left

Configure peer internal network fixed IP Consistent

Configure peer external network fixed IP Consistent

Internal network virtual IP Consistent

External network virtual IP Consistent

Computer name Consistent bam503_right

Internal network fixed IP Consistent

External network fixed IP Consistent

**************************************

%%LST BAMIPRT:;%%


List BAM IP Route

-----------------

Destination network address Destination address mask Forward route address

*************************************************

%%LST SUBRACK: SRN=0;%%


List Subrack

------------

Subrack No. = 0

Subrack name = RSS

Master SPU slot No. = 0

Board distribution = SLOT0:SPU/MPU;SLOT1:SPU/MPU;SLOT2:SPU/MPU;SLOT3:SPU/MPU;SLOT4:SPU/MPU;SLOT5:SPU/MPU;SLOT6:SCU;SLOT7:SCU;SLOT8:DPU;SLOT9:DPU;SLOT10:<NULL>;SLOT11:<NULL>;SLOT12:GCU;SLOT13:GCU;SLOT14:<NULL>;SLOT15:<NULL>;SLOT16:<NULL>;SLOT17:<NULL>;SLOT18:AOU;SLOT19:AOU;SLOT24:AOU;SLOT25:AOU;SLOT26:UOI_ATM;SLOT27:UOI_ATM;

Backup type = SLOT14:<NULL>;SLOT16:<NULL>;SLOT18:Backup;SLOT24:Backup;SLOT26:Backup;

PFCU = YES

MDMC = YES

Logical Inhibited board = NO

Physical Inhibited board = NO

Clock board type = GCU***************************

%%LST DSCPMAP: LstFormat=VERTICAL;%%


LST Map VLAN To DSCP

--------------------

Differentiated Service Codepoint = 60

VLAN Priority = 7


VLAN Priority = 7


VLAN Priority = 7


VLAN Priority = 7


Prompt information

*********************************************

%%DSP PWR: SRN=0;%%


Analog values of MDMC

---------------------

Subrack No. = 0

Voltage value of channel 1(-48V input)[-V] = 54


Temperature of power distribution subrack[dDegree Celsius] = 0

Relative humidity of power distribution subrack = 0%

Value of analog sensor 1 = 0%

Value of analog sensor 2 = 0




Voltage value of channel 6(-48V input)[-V] = 54**************************************

%%DSP FANTEMPERATURE: FANFLAG=NORMAL_FAN, SRN=0;%%


PFCU temperature

----------------

Subrack No. Fan type Environment temperature Subrack temperature

0 Normal fan 31Degree Celsius 32Degree Celsius

%%DSP FAN: FANFLAG=NORMAL_FAN, SRN=0;%%


Fan in-position state

---------------------

Subrack No. Fan type Fan 1 Fan 2 Fan 3 Fan 4 Fan 5 Fan 6 FAN7 FAN8 FAN9

0 Normal fan In position In position In position In position In position In position In position In position In position

***************************

%%DSP CLK: SRN=0, SN=0;%%


Information of SPU/MPU board clock state

----------------------------------------

Slot No. = 0

Board type = SPU

1PPS clock state = Normal

RFN status = Normal

**********************

%%DSP CLK: SRN=0, SN=24;%%


Information of RPIU board clock state

-------------------------------------

Slot No. = 24

Board type = AOU

Backplane TDM8k clock state = Normal

Backplane TDM32M clock state = Normal

SDH 8K clock of backplane = Normal

SDH 19M clock state of backplane = Normal

No.0 2M clock state of Up subcard = Normal

2M clock state of down subcard = <NULL>

**************************

%%LST CLKSRC: LstFormat=VERTICAL;%%


List Clock Source

-----------------

Clock source priority = 1

Clock source type = LINE1_8KHZ********************************

%%LST CLKMODE: LstFormat=VERTICAL;%%


List Current Clock Reference Source And Handover Strategy

---------------------------------------------------------

System clock working mode = AUTO

Currently system clock priority = <NULL>

%%LST CLK: SRN=0, SN=24, LstFormat=VERTICAL;%%


List Board Clock Source Configuration

-------------------------------------

Subrack No. = 0

Slot No. = 24

Board type = AOU

Clock source of output clock = 0

Output switch of 2M output clock 1 = OFF

Output switch of 2M output clock 2 = OFF

OutSwitch of backplane 8K OutClock 1 = OFF

OutSwitch of backplane 8K OutClock 2 = OFF

*************************************

%%LST CPUTHD: BT=AEU/PEU/AOU/FG2/GOU/POU/UOI_ATM/UOI_IP, LstFormat=VERTICAL;%%


List CPU Alarm Threshold

------------------------

Board type = AEU/PEU/AOU/FG2/GOU/POU/UOI_ATM/UOI_IP

CPU occupancy alarm clearance threshold = 60

CPU occupancy alarm threshold = 70

DSP occupancy alarm clearance threshold = <NULL>

DSP occupancy alarm threshold = <NULL>

%%LST CPUTHD: BT=SPU, LstFormat=VERTICAL;%%


List CPU Alarm Threshold

------------------------

Board type = SPU

CPU occupancy alarm clearance threshold = 60

CPU occupancy alarm threshold = 70

DSP occupancy alarm clearance threshold = <NULL>

DSP occupancy alarm threshold = <NULL>

******************************

%%DSP BRD: SRN=0, SN=0;%%


Board state

-----------

Subrack No. = 0

Slot No. = 0

Subsystem No. = 0

Board type = MPUa

CPU status = Active normal

CPU operation status changed time = 2010-03-17 14:35:19

Memory capacity = 512M

DSP memory capacity = <NULL>

Board Serial No. = 21030517301093000883

Executing inner configuration or not = No

FrameIdValue = 80(128)

Subrack No. = 0

Slot No. = 0

Subsystem No. = 1

Board type = SPUa





Board Serial No. = 21030517301093000883



Subrack No. = 0

Slot No. = 0

Subsystem No. = 2

Board type = SPUa





Board Serial No. = 21030517301093000883



Subrack No. = 0

Slot No. = 0

Subsystem No. = 3

Board type = SPUa





Board Serial No. = 21030517301093000883




--- END

+++ WCDMA-RNC 2010-11-03 16:56:17

O&M #233834

%%DSP BRDVER: SRN=0;%%


Board version information

-------------------------

Subrack No. = 0

Slot No. = 6

Subsystem No. = 0

Board type = SCU

Host system software version = BSC6810V200R010C01SPC060

Host software version in FLASH = BSC6810V200R010C01SPC060

Standby area software version in FLASH = NO FILE

BIOS0 software version in FLASH = 207

BIOS1 software version in FLASH = <NULL>

Board BSP software version = BSPV100R003C01B026SP08

Board BIOS software version = 207

PCB version = PARCSCU VER.D

Logical version = (U87)005(U1)006

Backplane version = VER.C

Subrack No. = 0

Slot No. = 7

Subsystem No. = 0

Board type = SCU








PCB version = PARCSCU VER.D

Logical version = (U87)005(U1)006

Backplane version = VER.C



-------------------------

Subrack No. = 0

Slot No. = 0

Subsystem No. = 0

Board type = MPU








PCB version = PARCXPU VER.C

Logical version = (U19)002(U60)002(U56)002(U2)003

Subrack No. = 0

Slot No. = 0

Subsystem No. = 1

Board type = SPU










Subrack No. = 0

Slot No. = 0

Subsystem No. = 2

Board type = SPU










Subrack No. = 0

Slot No. = 0

Subsystem No. = 3

Board type = SPU










Subrack No. = 0

Slot No. = 1

Subsystem No. = 0

Board type = MPU










Subrack No. = 0

Slot No. = 1

Subsystem No. = 1

Board type = SPU










Subrack No. = 0

Slot No. = 1

Subsystem No. = 2

Board type = SPU










Subrack No. = 0

Slot No. = 1

Subsystem No. = 3

Board type = SPU










Subrack No. = 0

Slot No. = 2

Subsystem No. = 0

Operation result = Board unavailable.

Subrack No. = 0

Slot No. = 2

Subsystem No. = 1


Subrack No. = 0

Slot No. = 2

Subsystem No. = 2


Subrack No. = 0

Slot No. = 2

Subsystem No. = 3


Subrack No. = 0

Slot No. = 3

Subsystem No. = 0


Subrack No. = 0

Slot No. = 3

Subsystem No. = 1


Subrack No. = 0

Slot No. = 3

Subsystem No. = 2


Subrack No. = 0

Slot No. = 3

Subsystem No. = 3


Subrack No. = 0

Slot No. = 4

Subsystem No. = 0


Subrack No. = 0

Slot No. = 4

Subsystem No. = 1


To be continued...

--- END

+++ WCDMA-RNC 2010-11-03 16:56:17

O&M #233834

%%DSP BRDVER: SRN=0;%%



-------------------------

Subrack No. = 0

Slot No. = 4

Subsystem No. = 2


Subrack No. = 0

Slot No. = 4

Subsystem No. = 3


Subrack No. = 0

Slot No. = 5

Subsystem No. = 0


Subrack No. = 0

Slot No. = 5

Subsystem No. = 1


Subrack No. = 0

Slot No. = 5

Subsystem No. = 2


Subrack No. = 0

Slot No. = 5

Subsystem No. = 3




-------------------------

Subrack No. = 0

Slot No. = 8

Subsystem No. = 0

Board type = DPU








PCB version = PARCDPU VER.C

Logical version = (U35)003(U7)003(U8)001(U4)005(U21)005(U37)006

DSP software version = BSC6810V200R010C01SPC060

Version of subcard = (DSP) VER.B

Subrack No. = 0

Slot No. = 9

Subsystem No. = 0

Board type = DPU








PCB version = PARCDPU VER.C

Logical version = (U35)003(U7)003(U8)001(U4)005(U21)005(U37)006

DSP software version = BSC6810V200R010C01SPC060

Version of subcard = (DSP) VER.B



-------------------------

Subrack No. = 0

Slot No. = 12

Subsystem No. = 0

Board type = GCU








PCB version = PARCGCK VER.C

Logical version = (U66)004(U25)005(U68)006

Version of CLK module = CLKV100R003C01B020

Version of Locate module = LOCATEV100R003C01B023

Subrack No. = 0

Slot No. = 13

Subsystem No. = 0

Board type = GCU








PCB version = PARCGCK VER.C


Version of CLK module = CLKV100R003C01B020

Version of Locate module = LOCATEV100R003C01B023



-------------------------

Subrack No. = 0

Slot No. = 18

Subsystem No. = 0

Board type = AOU






Board BSP software version = TRAN V100R003C02B066


Load module version = LOADV100R002C01

PCB version = PARCPIU VER. A

PCB version of No.0 subcard = PARCPIU VER. B



Subrack No. = 0

Slot No. = 19

Subsystem No. = 0


Subrack No. = 0

Slot No. = 24

Subsystem No. = 0

Board type = AOU













Subrack No. = 0

Slot No. = 25

Subsystem No. = 0


Subrack No. = 0

Slot No. = 26

Subsystem No. = 0

Board type = UOI_ATM










PCB version of No.0 subcard = PARCPIU VER. A

PCB version of No.1 subcard = <NULL>


Subrack No. = 0

Slot No. = 27

Subsystem No. = 0

Board type = UOI_ATM










PCB version of No.0 subcard = PARCPIU VER. A

PCB version of No.1 subcard = <NULL>



MDMC/PFCU information

---------------------

Subrack No. = 0

Slot No. = 28

Subsystem No. = 0

Board type = MDMC

Software version = 2

Software special build = 1

Hardware PCB version = 1

Hardware programmable component version = 1

Compiling year = 2007

Compiling month = 11

Compiling day = 22

Version description = The script of PAMU 2.01

Subrack No. = 0

Slot No. = 29

Subsystem No. = 0

Board type = Normal fan

Software version = 1

Software special build = 3

Hardware PCB version = 1

Hardware programmable component version = 0

Compiling year = 2008

Compiling month = 3

Compiling day = 1

Version description = PARC Fan Control Unit PFCU.

Subrack No. = 0

Slot No. = 30

Subsystem No. = 0


Subrack No. = 0

Slot No. = 31

Subsystem No. = 0


%%DSP CPUUSAGE: SRN=0;%%


Subsystem CPU occupancy

-----------------------

Slot No. Subsystem No. CPU occupancy Operation result

0 0 5% Succeeded

0 1 9% Succeeded

0 2 8% Succeeded

0 3 10% Succeeded

1 0 3% Succeeded

1 1 1% Succeeded

1 2 1% Succeeded

1 3 2% Succeeded

2 0 Unknown Board unavailable.












To be continued...

--- END

+++ WCDMA-RNC 2010-11-03 17:01:51

O&M #233838

%%DSP CPUUSAGE: SRN=0;%%


Subsystem CPU occupancy

-----------------------

Slot No. Subsystem No. CPU occupancy Operation result





6 0 13% Succeeded

7 0 17% Succeeded

8 0 13% Succeeded

9 0 13% Succeeded

12 0 5% Succeeded

13 0 5% Succeeded

18 0 17% Succeeded


24 0 18% Succeeded


26 0 10% Succeeded

27 0 9% Succeeded

Huawei Rnc Commands and Details

Documents

Transcript of Huawei Rnc Commands and Details