Http:// World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 )...
-
Upload
delilah-lucas -
Category
Documents
-
view
219 -
download
0
Transcript of Http:// World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 )...
http://www.eunil.com
World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd.
Everyday is a good day
(株 )誾日
http://www.eunil.com
World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd.
Everyday is a good day
(株 )誾日
PCB Router / Depanel machine is used to separate the arrayed printed circuit board (PCB) / printed wiring board (PWB) from the main panel PCB. This equipment is automatically supplied PCB from the downstream machine or manually loaded PCB by the operator. This machine is using the high revolution milling spindle to separate PCB. It would be connected with the automatic PCB unloading system as an option.It could be applied to Screw Application machine.
http://www.eunil.com
World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd.
Everyday is a good day
(株 )誾日
PCB Router / Depanel machine : Off-Line ETR-200This machine is used to separate the main panel PCB and the arrayed PCB as off-line.The operator manually load PCB to the machine. Then, the machine will separate the PCB by the program. When it finishes the job, the PCB will be unloaded by the operator.The movement is controlled by the robot, 2 X-Axis, 1 Y-Axis, 1 Z-Axis.It has a single spindle head and it will also have dual spindle head as an option.It has two shuttle, working bay, which has the safety feature.The shuttle has PCB holding fixture for every different model of PCB. It will suck out the dust or the milling particles to the dust collector.It has the bit optimization and the bit break detection as an option.
http://www.eunil.com
World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd.
Everyday is a good day
(株 )誾日
PCB Router / Depanel machine : Off-Line ETR-200FeaturesMovement : X, Y, Z AxisWorking Bay : ShuttleProgramming : PLC and Robot teachingMonitor and Operating : 5” Touch screenBit : Quick changeSafety : Door and Barrier Optimal sensor
OptionBit optimization : Count No. of worked PCBBit break detectionDual head spindle
http://www.eunil.com
World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd.
Everyday is a good day
(株 )誾日
PCB Router / Depanel machine : Off-Line ETR-200Specification
Machine size (mm)
1,200 X 1,250 X 1,600
PCB size (mm) 330 X 250 ~ 50 X 50
No. of Head Single (Dual as option)
Robot
X-Axis 600mm stroke
Y-Axis 600mm stroke
Z-Axis 100mm stroke
Repeatability
±0.02mm
Speed Max. 1,000mm/sec
Spindle Max. 60,000rpm milling spindle
Power supply 220V[±5%], 50~60Hz, 1Phase
Power consumption
5,000 Watt
Air supply 5 bar
Programming PLC & Robot teaching
http://www.eunil.com
World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd.
Everyday is a good day
(株 )誾日
PCB Router / Depanel machine : Off-Line ETR-200Head & Spindle Specification
No. of Head Single (Dual as option)
Spindle
Speed Max. 60,000 rpm
Power 150W, 30V, Max. 1,000Hz
Type Milling
Maker KAVO
Bit Type Chipbreaker, Downdraft
Life time 90 M
RecommendCut condition
38,000 rpm83mm/sec movement( It would be different due to PCB condition )
Size Ø1.6mm
http://www.eunil.com
World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd.
Everyday is a good day
(株 )誾日
PCB Router / Depanel machine : Off-Line ETR-200
Robot Specification
Robot
X-Axis 600mm stroke
Y-Axis 600mm stroke
Z-Axis 100mm stroke
Speed Max. 1,000mm/sec
Shuttle
No. of shuttle
2 shuttles
Fixture 1 PCB holding
Safety Optimal sensor
Safety : Barrier Optimal Sensor
Shuttle : 1 PCB holding fixture ( Photo as option)
X-AxisZ-Axis
Y-Axis
http://www.eunil.com
World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd.
Everyday is a good day
(株 )誾日
PCB Router / Depanel machine : Off-Line ETR-200
Dust collector Specification
Size (mm) 450 X 520 X 900
Blower
Volume 25 m³/min
Pressure 230 mmAq
Motor 1.5 kw
Filter Material Polyester
Cleaning Manual
http://www.eunil.com
World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd.
Everyday is a good day
(株 )誾日
PCB Router / Depanel machine : Off-Line ETR-200Routing PCBs Feature
Best condition for using PCB Router / Depanel machineRecommended
High rate of bit break
Short bit life timeCreate lots of dust / routing particles