HTD Pulleys
30
HTD Timing Pulleys 3mm Pitch - To Suit 9mm Wide Belts PULLEYS & BELTS HTD 3M [email protected] www.ondrives.com +44 (0)1246 455500 +44 (0)1246 455522 Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility. ondrives Execution 0F Execution 1F Execution 8 D f d k d 0 D m F d 0 d k D f L L F d 0 d k D m d d L F D m Type No. of Teeth PCD d 0 Tip Dia. d k Flange Dia. D f Hub Dia. D m Face Width F Overall Width L Bore d No. of Flanges Price Each 1 - 5 P10-3M-09F 0F 10 9.55 8.79 13.0 13.0 10.2 17.5 * 2 £5.51 P12-3M-09F 0F 12 11.46 10.70 15.0 15.0 10.2 17.5 * 2 £5.51 P14-3M-09F 0F 14 13.37 12.61 16.0 16.0 10.2 17.5 * 2 £5.60 P15-3M-09F 0F 15 14.32 13.56 17.5 17.5 10.2 17.5 * 2 £5.60 P16-3M-09F 1F 16 15.28 14.52 17.5 10.0 12.8 20.6 4 2 £6.01 P18-3M-09F 1F 18 17.19 16.43 20.0 11.0 12.8 20.6 6 2 £6.11 P20-3M-09F 1F 20 19.10 18.34 23.0 13.0 12.8 20.6 6 2 £6.14 P21-3M-09F 1F 21 20.05 19.29 25.0 14.0 12.8 20.6 6 2 £6.32 P22-3M-09F 1F 22 21.01 20.25 25.0 14.0 12.8 20.6 6 2 £6.52 P24-3M-09F 1F 24 22.92 22.16 25.0 14.0 12.8 20.6 6 2 £6.93 P26-3M-09F 1F 26 24.83 24.07 28.0 16.0 12.8 20.6 6 2 £7.05 P28-3M-09F 1F 28 26.74 25.98 32.0 18.0 12.8 20.6 6 2 £7.18 P30-3M-09F 1F 30 28.65 27.89 32.0 20.0 12.8 20.6 6 2 £7.33 P32-3M-09F 1F 32 30.56 29.80 36.0 22.0 12.8 20.6 6 2 £7.78 P36-3M-09F 1F 36 34.38 33.62 39.0 26.0 13.4 22.2 6 2 £8.28 P40-3M-09F 1F 40 38.20 37.44 42.0 28.0 13.4 22.2 6 2 £9.10 P44-3M-09F 1F 44 42.02 41.26 48.0 33.0 13.4 22.2 6 2 £10.52 P48-3M-09 8 48 45.84 45.08 - 33.0 13.4 22.2 8 0 £11.37 P60-3M-09 8 60 57.30 56.54 - 33.0 13.4 22.2 8 0 £12.15 P72-3M-09 8 72 68.75 67.99 - 33.0 13.4 22.2 8 0 £13.92 Part Number Material Execution 0F: Aluminium with Zinc plated steel flanges. Execution 1F: Aluminium with Zinc plated steel flanges. Execution 8: Aluminium. * Centre drilled or pilot bored Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation. Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
description
Toothed Belt Pulleys
Transcript of HTD Pulleys
HTD Timing Pulleys3mm Pitch - To Suit 9mm Wide Belts
P U L L E Y S & B E LT SHTD 3M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
Execution 0F Execution 1F Execution 8
Df dkd0 Dm
F
d0 dkDf
L
LF
d0 dk Dmdd
L
F
Dm
TypeNo. of Teeth
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
FaceWidth
F
Overall Width
LBore
dNo. of
Flanges
PriceEach1 - 5
P10-3M-09F 0F 10 9.55 8.79 13.0 13.0 10.2 17.5 * 2 £5.51P12-3M-09F 0F 12 11.46 10.70 15.0 15.0 10.2 17.5 * 2 £5.51P14-3M-09F 0F 14 13.37 12.61 16.0 16.0 10.2 17.5 * 2 £5.60P15-3M-09F 0F 15 14.32 13.56 17.5 17.5 10.2 17.5 * 2 £5.60P16-3M-09F 1F 16 15.28 14.52 17.5 10.0 12.8 20.6 4 2 £6.01P18-3M-09F 1F 18 17.19 16.43 20.0 11.0 12.8 20.6 6 2 £6.11P20-3M-09F 1F 20 19.10 18.34 23.0 13.0 12.8 20.6 6 2 £6.14P21-3M-09F 1F 21 20.05 19.29 25.0 14.0 12.8 20.6 6 2 £6.32P22-3M-09F 1F 22 21.01 20.25 25.0 14.0 12.8 20.6 6 2 £6.52P24-3M-09F 1F 24 22.92 22.16 25.0 14.0 12.8 20.6 6 2 £6.93P26-3M-09F 1F 26 24.83 24.07 28.0 16.0 12.8 20.6 6 2 £7.05P28-3M-09F 1F 28 26.74 25.98 32.0 18.0 12.8 20.6 6 2 £7.18P30-3M-09F 1F 30 28.65 27.89 32.0 20.0 12.8 20.6 6 2 £7.33P32-3M-09F 1F 32 30.56 29.80 36.0 22.0 12.8 20.6 6 2 £7.78P36-3M-09F 1F 36 34.38 33.62 39.0 26.0 13.4 22.2 6 2 £8.28P40-3M-09F 1F 40 38.20 37.44 42.0 28.0 13.4 22.2 6 2 £9.10P44-3M-09F 1F 44 42.02 41.26 48.0 33.0 13.4 22.2 6 2 £10.52P48-3M-09 8 48 45.84 45.08 - 33.0 13.4 22.2 8 0 £11.37P60-3M-09 8 60 57.30 56.54 - 33.0 13.4 22.2 8 0 £12.15P72-3M-09 8 72 68.75 67.99 - 33.0 13.4 22.2 8 0 £13.92
PartNumber
Material Execution 0F: Aluminium with Zinc plated steel flanges.Execution 1F: Aluminium with Zinc plated steel flanges.Execution 8: Aluminium.* Centre drilled or pilot bored
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys3mm Pitch - To Suit 15mm Wide Belts
P U L L E Y S & B E LT SHTD 3M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
Execution 0F Execution 1F Execution 8
Df dkd0 Dm
F
d0 dkDf
L
LF
d0 dk Dmdd
L
F
Dm
TypeNo. of Teeth
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
FaceWidth
F
Overall Width
LBore
dNo. of
Flanges
PriceEach1 - 5
P10-3M-15F 0F 10 9.55 8.79 13.0 13.0 17.0 26 * 2 £5.92P12-3M-15F 0F 12 11.46 10.70 15.0 15.0 17.0 26 * 2 £6.11P14-3M-15F 0F 14 13.37 12.61 16.0 16.0 17.0 26 * 2 £6.33P15-3M-15F 0F 15 14.32 13.56 17.5 17.5 17.0 26 * 2 £6.42P16-3M-15F 1F 16 15.28 14.52 17.5 10.0 19.5 26 4 2 £6.52P18-3M-15F 1F 18 17.19 16.43 20.0 11.0 19.5 26 6 2 £6.67P20-3M-15F 1F 20 19.10 18.34 23.0 13.0 19.5 26 6 2 £6.67P21-3M-15F 1F 21 20.05 19.29 25.0 14.0 19.5 26 6 2 £6.96P22-3M-15F 1F 22 21.01 20.25 25.0 14.0 19.5 26 6 2 £7.05P24-3M-15F 1F 24 22.92 22.16 25.0 14.0 19.5 26 6 2 £7.33P26-3M-15F 1F 26 24.83 24.07 28.0 16.0 19.5 26 6 2 £7.87P28-3M-15F 1F 28 26.74 25.98 32.0 18.0 19.5 26 6 2 £8.28P30-3M-15F 1F 30 28.65 27.89 32.0 20.0 19.5 26 6 2 £8.50P32-3M-15F 1F 32 30.56 29.80 36.0 22.0 19.5 26 6 2 £9.10P36-3M-15F 1F 36 34.38 33.62 39.0 26.0 20.0 30 6 2 £10.11P40-3M-15F 1F 40 38.20 37.44 42.0 28.0 20.0 30 6 2 £11.08P44-3M-15F 1F 44 42.02 41.26 48.0 33.0 20.0 30 6 2 £12.66P48-3M-15 8 48 45.84 45.08 - 33.0 20.0 30 8 0 £13.92P60-3M-15 8 60 57.30 56.54 - 33.0 20.0 30 8 0 £16.69P72-3M-15 8 72 68.75 67.99 - 33.0 20.0 30 8 0 £18.20
PartNumber
Material Execution 0F: Aluminium with Zinc plated steel flanges.Execution 1F: Aluminium with Zinc plated steel flanges.Execution 8: Aluminium.* Centre drilled or pilot bored
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Rubber Timing Pulley Belts3mm Pitch - 9mm Wide
P U L L E Y S & B E LT SHTD 3M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialRubber back/teeth, glass fibre reinforced, nylon fabric tooth facing toDIN / ISO 5296.
Options9 & 15mm wide belts supplied as standard. Other belt widths and lengths available. P.O.A.
HTD-105-3M/9 105 35 £3.30HTD-111-3M/9 111 37 £3.30HTD-129-3M/9 129 43 £3.30HTD-141-3M/9 141 47 £3.30HTD-144-3M/9 144 48 £3.30HTD-150-3M/9 150 50 £3.30HTD-159-3M/9 159 53 £3.30HTD-168-3M/9 168 56 £3.30HTD-174-3M/9 174 58 £3.43HTD-177-3M/9 177 59 £3.43HTD-180-3M/9 180 60 £3.43HTD-186-3M/9 186 62 £3.43HTD-195-3M/9 195 65 £3.43HTD-201-3M/9 201 67 £3.49HTD-204-3M/9 204 68 £3.49HTD-210-3M/9 210 70 £3.49HTD-213-3M/9 213 71 £3.49HTD-216-3M/9 216 72 £3.49HTD-225-3M/9 225 75 £3.49HTD-240-3M/9 240 80 £3.59HTD-243-3M/9 243 81 £3.62HTD-252-3M/9 252 84 £3.62HTD-255-3M/9 255 85 £3.62HTD-264-3M/9 264 88 £3.62HTD-267-3M/9 267 89 £3.62HTD-270-3M/9 270 90 £P.O.AHTD-276-3M/9 276 92 £P.O.AHTD-285-3M/9 285 95 £3.62HTD-288-3M/9 288 96 £3.71HTD-291-3M/9 291 97 £3.71HTD-300-3M/9 300 100 £3.71HTD-312-3M/9 312 104 £3.90HTD-318-3M/9 318 106 £3.90HTD-327-3M/9 327 109 £P.O.AHTD-330-3M/9 330 110 £3.90HTD-336-3M/9 336 112 £3.90HTD-339-3M/9 339 113 £3.90HTD-345-3M/9 345 115 £P.O.AHTD-357-3M/9 357 119 £3.90HTD-363-3M/9 363 121 £4.00
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-375-3M/9 375 125 £P.O.AHTD-384-3M/9 384 128 £4.00HTD-390-3M/9 390 130 £4.09HTD-405-3M/9 405 135 £P.O.AHTD-420-3M/9 420 140 £4.09HTD-432-3M/9 432 144 £P.O.AHTD-447-3M/9 447 149 £4.18HTD-474-3M/9 474 158 £4.28HTD-480-3M/9 480 160 £4.28HTD-486-3M/9 486 162 £4.41HTD-489-3M/9 489 163 £4.41HTD-501-3M/9 501 167 £4.41HTD-510-3M/9 510 170 £4.41HTD-513-3M/9 513 171 £4.41HTD-522-3M/9 522 174 £4.47HTD-531-3M/9 531 177 £4.47HTD-537-3M/9 537 179 £4.47HTD-564-3M/9 564 188 £4.59HTD-570-3M/9 570 190 £4.66HTD-576-3M/9 576 192 £P.O.AHTD-597-3M/9 597 199 £4.75HTD-600-3M/9 600 200 £4.75HTD-606-3M/9 606 202 £4.75HTD-633-3M/9 633 211 £4.75HTD-648-3M/9 648 216 £4.88HTD-669-3M/9 669 223 £4.97HTD-711-3M/9 711 237 £5.07HTD-735-3M/9 735 245 £P.O.AHTD-738-3M/9 738 246 £5.07HTD-756-3M/9 756 252 £5.44HTD-882-3M/9 882 294 £5.76HTD-945-3M/9 945 315 £5.85HTD-1062-3M/9 1062 354 £5.95HTD-1125-3M/9 1125 375 £5.89HTD-1245-3M/9 1245 415 £6.52HTD-1263-3M/9 1263 421 £6.53HTD-1530-3M/9 1530 510 £7.40HTD-1569-3M/9 1569 523 £7.56HTD-1863-3M/9 1863 621 £8.22
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
1.172.41
3
Discounts: 6+ -7% | 20+ -14% | 40+ -20% | 60+ -24% | 100+ -27%
HTD Rubber Timing Pulley Belts3mm Pitch - 15mm Wide
P U L L E Y S & B E LT SHTD 3M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
1.172.41
3
HTD-105-3M/15 105 35 £5.26HTD-111-3M/15 111 37 £5.26HTD-129-3M/15 129 43 £5.26HTD-141-3M/15 141 47 £5.26HTD-144-3M/15 144 48 £5.26HTD-150-3M/15 150 50 £5.26HTD-159-3M/15 159 53 £5.38HTD-168-3M/15 168 56 £5.38HTD-174-3M/15 174 58 £5.35HTD-177-3M/15 177 59 £5.44HTD-180-3M/15 180 60 £5.44HTD-186-3M/15 186 62 £5.44HTD-195-3M/15 195 65 £5.44HTD-201-3M/15 201 67 £5.57HTD-204-3M/15 204 68 £5.57HTD-210-3M/15 210 70 £5.57HTD-213-3M/15 213 71 £5.57HTD-216-3M/15 216 72 £5.92HTD-225-3M/15 225 75 £5.67HTD-240-3M/15 240 80 £5.76HTD-243-3M/15 243 81 £5.76HTD-252-3M/15 252 84 £5.76HTD-255-3M/15 255 85 £5.76HTD-264-3M/15 264 88 £5.85HTD-267-3M/15 267 89 £5.85HTD-270-3M/15 270 90 £P.O.AHTD-276-3M/15 276 92 £P.O.AHTD-285-3M/15 285 95 £5.85HTD-288-3M/15 288 96 £5.95HTD-291-3M/15 291 97 £5.95HTD-300-3M/15 300 100 £5.95HTD-312-3M/15 312 104 £5.95HTD-318-3M/15 318 106 £6.14HTD-327-3M/15 327 109 £P.O.AHTD-330-3M/15 330 110 £6.14HTD-336-3M/15 336 112 £6.14HTD-339-3M/15 339 113 £6.26HTD-345-3M/15 345 115 £P.O.AHTD-357-3M/15 357 119 £6.26HTD-363-3M/15 363 121 £6.26
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-375-3M/15 375 125 £P.O.AHTD-384-3M/15 384 128 £6.26HTD-390-3M/15 390 130 £6.52HTD-405-3M/15 405 135 £P.O.AHTD-420-3M/15 420 140 £6.52HTD-432-3M/15 432 144 £P.O.AHTD-447-3M/15 447 149 £6.74HTD-474-3M/15 474 158 £6.93HTD-480-3M/15 480 160 £6.93HTD-486-3M/15 486 162 £6.93HTD-489-3M/15 489 163 £6.93HTD-501-3M/15 501 167 £7.02HTD-510-3M/15 510 170 £7.02HTD-513-3M/15 513 171 £7.02HTD-522-3M/15 522 174 £7.11HTD-531-3M/15 531 177 £7.11HTD-537-3M/15 537 179 £7.11HTD-564-3M/15 564 188 £7.30HTD-570-3M/15 570 190 £7.30HTD-576-3M/15 576 192 £P.O.AHTD-597-3M/15 597 199 £7.62HTD-600-3M/15 600 200 £7.62HTD-606-3M/15 606 202 £7.62HTD-633-3M/15 633 211 £7.71HTD-648-3M/15 648 216 £7.90HTD-669-3M/15 669 223 £7.90HTD-711-3M/15 711 237 £8.09HTD-735-3M/15 735 245 £P.O.AHTD-738-3M/15 738 246 £8.09HTD-756-3M/15 756 252 £8.69HTD-882-3M/15 882 294 £9.26HTD-945-3M/15 945 315 £9.48HTD-1062-3M/15 1062 354 £9.48HTD-1125-3M/15 1125 375 £9.85HTD-1245-3M/15 1245 415 £10.33HTD-1263-3M/15 1263 421 £10.33HTD-1530-3M/15 1530 510 £11.90HTD-1569-3M/15 1569 523 £12.12HTD-1863-3M/15 1863 621 £13.16
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
MaterialRubber back/teeth, glass fibre reinforced, nylon fabric tooth facing toDIN / ISO 5296.
Options9 & 15mm wide belts supplied as standard. Other belt widths and lengths available. P.O.A.
Discounts: 6+ -7% | 20+ -14% | 40+ -20% | 60+ -24% | 100+ -27%
HTD Timing Pulleys5mm Pitch - To Suit 9mm Wide Belts
P U L L E Y S & B E LT SHTD 5M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
FaceWidth
F
Overall Width
LBore
dNo. of
Flanges
PriceEach1 - 5
P12-5M-09F 1F 12 19.10 17.96 23 13.0 14.5 20.0 4 2 £4.88P14-5M-09F 1F 14 22.28 21.14 25 13.0 14.5 20.0 6 2 £5.26P15-5M-09F 1F 15 23.87 22.73 28 16.0 14.5 20.0 6 2 £5.51P16-5M-09F 1F 16 25.46 24.32 28 16.5 14.5 20.0 6 2 £5.82P18-5M-09F 1F 18 28.65 27.51 32 20.0 14.5 20.0 6 2 £6.42P20-5M-09F 1F 20 31.83 30.69 36 23.0 14.5 22.5 6 2 £6.83P21-5M-09F 1F 21 33.42 32.28 38 24.0 14.5 22.5 6 2 £7.08P22-5M-09F 1F 22 35.01 33.87 39 25.5 14.5 22.5 6 2 £7.40P24-5M-09F 1F 24 38.20 37.06 42 27.0 14.5 22.5 6 2 £7.84P26-5M-09F 1F 26 41.38 40.24 44 30.0 14.5 22.5 6 2 £8.19P28-5M-09F 1F 28 44.56 43.42 48 30.5 14.5 22.5 6 2 £8.53P30-5M-09F 1F 30 47.75 46.60 51 35.0 14.5 22.5 6 2 £8.85P32-5M-09F 1F 32 50.93 49.79 54 38.0 14.5 22.5 8 2 £10.01P36-5M-09F 1F 36 57.30 56.16 60 38.0 14.5 22.5 8 2 £10.42P40-5M-09F 1F 40 63.66 62.52 71 38.0 14.5 22.5 8 2 £10.83P44-5M-09 3 44 70.03 68.89 - 38.0 14.5 25.5 8 0 £15.52P48-5M-09 3 48 76.39 75.25 - 45.0 14.5 25.5 8 0 £17.13P60-5M-09 3 60 95.49 94.35 - 45.0 14.5 25.5 8 0 £22.90P72-5M-09 3 72 114.59 113.45 - 45.0 14.5 25.5 8 0 £28.00
PartNumber
Df d0 dk Dm
L
d
F
d0 dk Dm
L
d
F
Execution 1F Execution 3
Material Execution 1F: Steel with Zinc plated steel flanges.Execution 3: Aluminium.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys5mm Pitch - To Suit 15mm Wide Belts
P U L L E Y S & B E LT SHTD 5M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
Df d0 dk Dm
L
d
F
d0 dk Dm
L
d
F
Execution 1F Execution 3
TypeNo. of Teeth
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
FaceWidth
F
Overall Width
LBore
dNo. of
Flanges
PriceEach1 - 5
P12-5M-15F 1F 12 19.10 17.96 23 13.0 20.5 26 * 2 £5.70P14-5M-15F 1F 14 22.28 21.14 25 13.0 20.5 26 6 2 £6.04P15-5M-15F 1F 15 23.87 22.73 28 16.0 20.5 26 6 2 £6.42P16-5M-15F 1F 16 25.46 24.32 28 16.5 20.5 26 6 2 £6.55P18-5M-15F 1F 18 28.65 27.51 32 20.0 20.5 26 6 2 £7.08P20-5M-15F 1F 20 31.83 30.69 36 23.0 20.5 26 6 2 £7.49P21-5M-15F 1F 21 33.42 32.28 38 24.0 20.5 26 6 2 £7.84P22-5M-15F 1F 22 35.01 33.87 39 25.5 20.5 26 6 2 £8.19P24-5M-15F 1F 24 38.20 37.06 42 27.0 20.5 28 6 2 £8.19P26-5M-15F 1F 26 41.38 40.24 44 30.0 20.5 28 6 2 £8.78P28-5M-15F 1F 28 44.56 43.42 48 30.5 20.5 28 6 2 £10.01P30-5M-15F 1F 30 47.75 46.60 51 35.0 20.5 28 6 2 £10.83P32-5M-15F 1F 32 50.93 49.79 54 38.0 20.5 28 8 2 £11.40P36-5M-15F 1F 36 57.30 56.16 60 38.0 20.5 28 8 2 £11.97P40-5M-15F 1F 40 63.66 62.52 71 38.0 20.5 28 8 2 £12.94P44-5M-15 3 44 70.03 68.89 - 38.0 20.5 30 8 0 £18.52P48-5M-15 3 48 76.39 75.25 - 38.0 20.5 30 8 0 £20.44P60-5M-15 3 60 95.49 94.35 - 50.0 20.5 30 8 0 £27.72P72-5M-15 3 72 114.59 113.45 - 50.0 20.5 30 8 0 £34.24
PartNumber
Material Execution 1F: Steel with Zinc plated steel flanges.Execution 3: Aluminium.* Centre drilled or pilot bored.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys5mm Pitch - To Suit 25mm Wide Belts
P U L L E Y S & B E LT SHTD 5M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
FaceWidth
F
Overall Width
LBore
dNo. of
Flanges
PriceEach1 - 5
P12-5M-25F 1F 12 19.10 17.96 23 13.0 30.5 36.0 * 2 £6.96P14-5M-25F 1F 14 22.28 21.14 25 13.0 30.5 36.0 6 2 £7.49P15-5M-25F 1F 15 23.87 22.73 28 16.0 30.5 36.0 6 2 £7.84P16-5M-25F 1F 16 25.46 24.32 28 16.5 30.5 36.0 6 2 £8.19P18-5M-25F 1F 18 28.65 27.51 32 20.0 30.5 36.0 6 2 £8.53P20-5M-25F 1F 20 31.83 30.69 36 23.0 30.5 36.0 6 2 £9.26P21-5M-25F 1F 21 33.42 32.28 38 24.0 30.5 38.0 6 2 £9.57P22-5M-25F 1F 22 35.01 33.87 39 25.5 30.5 38.0 6 2 £10.23P24-5M-25F 1F 24 38.20 37.06 42 27.0 30.5 38.0 6 2 £11.24P26-5M-25F 1F 26 41.38 40.24 44 30.0 30.5 38.0 6 2 £11.87P28-5M-25F 1F 28 44.56 43.42 48 30.5 30.5 38.0 6 2 £12.85P30-5M-25F 1F 30 47.75 46.60 51 35.0 30.5 38.0 6 2 £13.95P32-5M-25F 1F 32 50.93 49.79 54 38.0 30.5 38.0 8 2 £14.80P36-5M-25F 1F 36 57.30 56.16 60 38.0 30.5 38.0 8 2 £15.52P40-5M-25F 1F 40 63.66 62.52 71 38.0 30.5 38.0 8 2 £17.86P44-5M-25 3 44 70.03 68.89 - 38.0 30.5 40.0 8 0 £24.85P48-5M-25 3 48 76.39 75.25 - 38.0 30.5 40.0 8 0 £27.59P60-5M-25 3 60 95.49 94.35 - 50.0 30.5 40.0 8 0 £37.57P72-5M-25 3 72 114.59 113.45 - 50.0 30.5 40.0 8 0 £47.18
PartNumber
Material Execution 1F: Steel with Zinc plated steel flanges.Execution 3: Aluminium.* Centre drilled or pilot bored.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Execution 1F Execution 3
Df d0 dk Dm
L
d
F
d0 dk Dm
L
d
F
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys with Taper Bore5mm Pitch - To Suit 15mm Wide Belts
P U L L E Y S & B E LT SHTD 5M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
ToSuitBush
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
FaceWidth
F
Overall Width
LNo. of
Flanges
PriceEach1 - 5
TL34-5M-15F 1F 34 1008 54.11 52.97 - 22 22 2 £11.78TL36-5M-15F 1F 36 1108 57.30 56.15 - 22 22 2 £12.50TL38-5M-15F 1F 38 1108 60.48 59.34 - 22 22 2 £13.23TL40-5M-15F 1F 40 1108 63.66 62.52 - 22 22 2 £13.54TL44-5M-15F 1F 44 1108 70.03 68.89 - 22 22 2 £14.93TL48-5M-15F 5F 48 1210 76.39 75.25 59 22 25 2 £17.13TL56-5M-15F 5F 56 1210 89.13 87.39 70 22 25 2 £19.75TL64-5M-15F 5F 64 1210 101.86 100.72 80 22 25 2 £23.94TL72-5M-15 5 72 1610 114.59 113.45 92 22 25 0 £25.51
PartNumber
Material Steel or Cast Iron with steel flanges.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Execution 1F Execution 5F Execution 5
Df d0 dk
F
d0 dk DmDf
LF
d0 dk Dm
LF
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Rubber Timing Pulley Belts5mm Pitch - 9mm Wide
P U L L E Y S & B E LT SHTD 5M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialRubber back/teeth, glass fibre reinforced, nylon fabric tooth facing toDIN / ISO 5296.
Options9, 15 & 25mm wide belts supplied as standard. 6mm and other belt widths also available. P.O.A.Other belt lengths also available. P.O.A.
HTD-225-5M/9 225 45 £3.52HTD-255-5M/9 255 51 £3.87HTD-265-5M/9 265 53 £3.93HTD-300-5M/9 300 60 £4.12HTD-330-5M/9 330 66 £4.18HTD-350-5M/9 350 70 £4.22HTD-375-5M/9 375 75 £4.31HTD-400-5M/9 400 80 £4.50HTD-425-5M/9 425 85 £4.59HTD-450-5M/9 450 90 £4.69HTD-475-5M/9 475 95 £4.78HTD-500-5M/9 500 100 £4.88HTD-525-5M/9 525 105 £4.97HTD-535-5M/9 535 107 £5.16HTD-550-5M/9 550 110 £5.16HTD-600-5M/9 600 120 £5.35
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-635-5M/9 635 127 £5.54HTD-665-5M/9 665 133 £5.67HTD-670-5M/9 670 134 £5.73HTD-700-5M/9 700 140 £5.89HTD-750-5M/9 750 150 £6.11HTD-755-5M/9 755 151 £6.11HTD-800-5M/9 800 160 £6.26HTD-900-5M/9 900 180 £6.77HTD-950-5M/9 950 190 £7.02HTD-1050-5M/9 1050 210 £7.59HTD-1125-5M/9 1125 225 £7.96HTD-1270-5M/9 1270 254 £8.53HTD-1350-5M/9 1350 270 £8.85HTD-1420-5M/9 1420 284 £9.19HTD-1500-5M/9 1500 300 £9.57
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
2.063.81
5
Discounts: 6+ -7% | 20+ -14% | 40+ -20% | 60+ -24% | 100+ -27%
HTD Rubber Timing Pulley Belts5mm Pitch - 15mm Wide
P U L L E Y S & B E LT SHTD 5M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialRubber back/teeth, glass fibre reinforced, nylon fabric tooth facing toDIN / ISO 5296.
Options9, 15 & 25mm wide belts supplied as standard. 6mm and other belt widths also available. P.O.A.Other belt lengths also available. P.O.A.
HTD-225-5M/15 225 45 £5.60HTD-255-5M/15 255 51 £6.14HTD-265-5M/15 265 53 £6.20HTD-300-5M/15 300 60 £6.26HTD-330-5M/15 330 66 £6.61HTD-350-5M/15 350 70 £6.77HTD-375-5M/15 375 75 £6.93HTD-400-5M/15 400 80 £7.02HTD-425-5M/15 425 85 £7.30HTD-450-5M/15 450 90 £7.49HTD-475-5M/15 475 95 £7.59HTD-500-5M/15 500 100 £7.87HTD-525-5M/15 525 105 £7.96HTD-535-5M/15 535 107 £8.06HTD-550-5M/15 550 110 £8.15HTD-600-5M/15 600 120 £8.53
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-635-5M/15 635 127 £8.72HTD-665-5M/15 665 133 £9.07HTD-670-5M/15 670 134 £9.10HTD-700-5M/15 700 140 £9.38HTD-750-5M/15 750 150 £9.67HTD-755-5M/15 755 151 £9.67HTD-800-5M/15 800 160 £10.04HTD-900-5M/15 900 180 £10.80HTD-950-5M/15 950 190 £11.18HTD-1050-5M/15 1050 210 £11.90HTD-1125-5M/15 1125 225 £12.47HTD-1270-5M/15 1270 254 £13.41HTD-1350-5M/15 1350 270 £14.04HTD-1420-5M/15 1420 284 £14.61HTD-1500-5M/15 1500 300 £15.27
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
2.063.81
5
Discounts: 6+ -7% | 20+ -14% | 40+ -20% | 60+ -24% | 100+ -27%
HTD Rubber Timing Pulley Belts5mm Pitch - 25mm Wide
P U L L E Y S & B E LT SHTD 5M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialRubber back/teeth, glass fibre reinforced, nylon fabric tooth facing toDIN / ISO 5296.
Options9, 15 & 25mm wide belts supplied as standard. 6mm and other belt widths also available. P.O.A.Other belt lengths also available. P.O.A.
HTD-225-5M/25 225 45 £8.97HTD-255-5M/25 255 51 £10.19HTD-265-5M/25 265 53 £10.61HTD-300-5M/25 300 60 £10.82HTD-330-5M/25 330 66 £11.20HTD-350-5M/25 350 70 £11.36HTD-375-5M/25 375 75 £11.68HTD-400-5M/25 400 80 £11.99HTD-425-5M/25 425 85 £12.41HTD-450-5M/25 450 90 £12.63HTD-475-5M/25 475 95 £12.83HTD-500-5M/25 500 100 £13.15HTD-525-5M/25 525 105 £13.36HTD-535-5M/25 535 107 £13.58HTD-550-5M/25 550 110 £13.86HTD-600-5M/25 600 120 £14.41
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-635-5M/25 635 127 £14.93HTD-665-5M/25 665 133 £15.20HTD-670-5M/25 670 134 £15.36HTD-700-5M/25 700 140 £15.87HTD-750-5M/25 750 150 £16.31HTD-755-5M/25 755 151 £16.42HTD-800-5M/25 800 160 £16.92HTD-900-5M/25 900 180 £18.19HTD-950-5M/25 950 190 £18.93HTD-1050-5M/25 1050 210 £20.24HTD-1125-5M/25 1125 225 £21.36HTD-1270-5M/25 1270 254 £22.94HTD-1350-5M/25 1350 270 £24.10HTD-1420-5M/25 1420 284 £24.84HTD-1500-5M/25 1500 300 £25.98
PartNumber Length
No. ofTeeth
PriceEach1 - 5
2.063.81
5
Discounts: 6+ -7% | 20+ -14% | 40+ -20% | 60+ -24% | 100+ -27%
HTD Timing Pulleys8mm Pitch - To Suit 20mm Wide Belts
P U L L E Y S & B E LT SHTD 8M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
Execution 1F
TypeNo. of Teeth
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
FaceWidth
F
Overall Width
LBore
dNo. of
Flanges
PriceEach1 - 5
P22-8M-20F 1F 22 56.02 54.65 60.0 43 28 38 12 2 £11.62P24-8M-20F 1F 24 61.12 59.75 66.0 45 28 38 12 2 £12.94P26-8M-20F 1F 26 66.21 64.85 70.0 48 28 38 12 2 £13.73P28-8M-20F 1F 28 71.30 70.08 75.0 50 28 38 15 2 £14.80P30-8M-20F 1F 30 76.39 75.13 82.5 55 28 38 15 2 £16.47P32-8M-20F 1F 32 81.49 80.16 87.0 60 28 38 15 2 £17.70P34-8M-20F 1F 34 86.58 85.22 91.0 66 28 38 15 2 £18.86P36-8M-20F 1F 36 91.67 90.30 97.0 70 28 38 15 2 £25.26P38-8M-20F 1F 38 96.77 95.39 102.0 75 28 38 15 2 £26.58P40-8M-20F 1F 40 101.86 100.49 106.0 75 28 38 15 2 £23.27P44-8M-20F 1F 44 112.05 110.67 120.0 75 28 38 15 2 £32.66P48-8M-20F 1F 48 122.23 120.86 128.0 75 28 38 15 2 £30.27
PartNumber
Material Steel with Steel flanges.
Options Other sizes available. P.O.A.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Df d0 dk Dm
L
d
F
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys8mm Pitch - To Suit 30mm Wide Belts
P U L L E Y S & B E LT SHTD 8M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
FaceWidth
F
Overall Width
LBore
dNo. of
Flanges
PriceEach1 - 5
P22-8M-30F 1F 22 56.02 54.65 60.0 43 38 48 12 2 £13.07P24-8M-30F 1F 24 61.12 59.75 66.0 45 38 48 12 2 £14.26P26-8M-30F 1F 26 66.21 64.85 70.0 48 38 48 12 2 £15.18P28-8M-30F 1F 28 71.30 70.08 75.0 50 38 48 15 2 £16.47P30-8M-30F 1F 30 76.39 75.13 82.5 55 38 48 15 2 £18.39P32-8M-30F 1F 32 81.49 80.16 87.0 60 38 48 15 2 £19.59P34-8M-30F 1F 34 86.58 85.22 91.0 66 38 48 15 2 £21.38P36-8M-30F 1F 36 91.67 90.30 97.0 70 38 48 15 2 £28.25P38-8M-30F 1F 38 96.77 95.39 102.0 75 38 48 15 2 £26.58P40-8M-30F 1F 40 101.86 100.49 106.0 75 38 48 15 2 £27.34P44-8M-30F 1F 44 112.05 110.67 120.0 75 38 48 15 2 £37.29P48-8M-30F 1F 48 122.23 120.86 128.0 75 38 48 15 2 £35.18
PartNumber
Material Steel with Steel flanges.
Options Other sizes available. P.O.A.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Execution 1F
Df d0 dk Dm
L
d
F
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys8mm Pitch - To Suit 50mm Wide Belts
P U L L E Y S & B E LT SHTD 8M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
FaceWidth
F
Overall Width
LBore
dNo. of
Flanges
PriceEach1 - 5
P22-8M-50F 1F 22 56.02 54.65 60.0 43 60 70 * 2 £16.91P24-8M-50F 1F 24 61.12 59.75 66.0 45 60 70 * 2 £18.49P26-8M-50F 1F 26 66.21 64.85 70.0 48 60 70 * 2 £20.09P28-8M-50F 1F 28 71.30 70.08 75.0 50 60 70 * 2 £21.79P30-8M-50F 1F 30 76.39 75.13 82.5 55 60 70 * 2 £23.94P32-8M-50F 1F 32 81.49 80.16 87.0 60 60 70 * 2 £25.89P34-8M-50F 1F 34 86.58 85.22 91.0 66 60 70 * 2 £27.90P36-8M-50F 1F 36 91.67 90.30 97.0 70 60 70 * 2 £37.04P38-8M-50F 1F 38 96.77 95.39 102.0 75 60 70 * 2 £37.98P40-8M-50F 1F 40 101.86 100.49 106.0 75 60 70 * 2 £36.22P44-8M-50F 1F 44 112.05 110.67 120.0 75 60 70 * 2 £46.62P48-8M-50F 1F 48 122.23 120.86 128.0 80 60 70 * 2 £46.93P56-8M-50F 6F 56 142.60 141.23 150.0 90 60 60 18 2 £58.84P64-8M-50F 6F 64 162.97 161.60 168.0 100 60 60 18 2 £73.23P72-8M-50F 6F 72 183.35 181.97 132.0 100 60 60 18 2 £88.32P80-8M-50 7 80 203.72 202.35 - 110 60 60 18 0 £93.05P90-8M-50 7 90 229.18 227.81 - 110 60 60 18 0 £104.29P112-8M-50 5 112 285.21 283.83 - 110 60 60 18 0 £133.27P144-8M-50 5 144 366.69 365.32 - 110 60 60 20 0 £166.03P168-8M-50 5 168 427.81 426.44 - 120 60 60 20 0 £207.71P192-8M-50 5 192 488.92 487.55 - 130 60 60 20 0 £267.24
PartNumber
Material Execution 1F & 6F: Steel withSteel flanges.Execution 7 & 5: Cast Iron.* Centre drilled or pilot bored
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Execution 1F Execution 6F Execution 7 Execution 5
Df d0 dk Dm
L
d
F
d0dk
Dm
Did
F
d0 dk
Dm
Did
F
Didk
Dm
d
F
Df d0
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys with Taper Bore8mm Pitch - To Suit 20mm Wide Belts
P U L L E Y S & B E LT SHTD 8M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
ToSuitBush
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
RecessDia.Di
FaceWidth
F
Overall Width
L SNo. ofFlanges
PriceEach1 - 5
TL22-8M-20F 2F 22 1008 56.02 54.65 60 - 37 28 - 22 2 £14.49TL24-8M-20F 2F 24 1108 61.12 59.75 66 - 44 28 - 22 2 £15.43TL26-8M-20F 2F 26 1108 66.21 64.85 70 - 44 28 - 22 2 £16.63TL28-8M-20F 2F 28 1108 71.30 70.08 75 - 50 28 - 25 2 £18.23TL30-8M-20F 2F 30 1108 76.39 75.13 83 - 56 28 - 22 2 £20.63TL32-8M-20F 2F 32 1610 81.49 80.16 87 - 63 28 - 22 2 £20.97TL34-8M-20F 2F 34 1610 86.58 85.22 91 - 64 28 - 25 2 £23.27TL36-8M-20F 2F 36 1610 91.67 90.30 97 - 68 28 - 25 2 £25.13TL38-8M-20F 2F 38 1610 96.77 95.39 102 - 72 28 - 25 2 £27.40TL40-8M-20F 2F 40 1610 101.86 100.49 106 - 76 28 - 25 2 £28.94TL44-8M-20F 5F 44 2012 112.05 110.67 120 92 - 28 32 - 2 £32.66TL48-8M-20F 5F 48 2012 122.23 120.86 128 96 - 28 32 - 2 £36.85TL56-8M-20F 5F 56 2012 142.60 141.23 150 110 137 28 32 - 2 £43.87TL64-8M-20F 6F 64 2012 162.97 161.60 168 110 137 28 32 - 2 £53.80TL72-8M-20F 6F 72 2012 183.35 181.97 192 110 137 28 32 - 2 £61.36
PartNumber
Material Steel with Steel flanges.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Execution 2F Execution 5F Execution 6F
Df d0 dk Di
FS
Df d0 dk Dm
FL
Did0
dkDm
L
Df
F
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys with Taper Bore8mm Pitch - To Suit 30mm Wide Belts
P U L L E Y S & B E LT SHTD 8M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
ToSuitBush
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
RecessDia.Di
FaceWidth
F
Overall Width
L SNo. ofFlanges
PriceEach1 - 5
TL22-8M-30F 2F 22 1008 56.02 54.65 60 - 37 38 - 22 2 £16.38TL24-8M-30F 2F 24 1108 61.12 59.75 66 - 44 38 - 22 2 £17.32TL26-8M-30F 2F 26 1108 66.21 64.85 70 - 44 38 - 22 2 £18.74TL28-8M-30F 2F 28 1210 71.30 70.08 75 - 50 38 - 25 2 £19.71TL30-8M-30F 1F 30 1615 76.39 75.13 83 - - 38 - 38 2 £21.38TL32-8M-30F 1F 32 1615 81.49 80.16 87 - - 38 - 38 2 £23.08TL34-8M-30F 1F 34 1615 86.58 85.22 91 - - 38 - 38 2 £25.64TL36-8M-30F 1F 36 1615 91.67 90.30 97 - - 38 - 38 2 £28.03TL38-8M-30F 1F 38 1615 96.77 95.39 102 - - 38 - 38 2 £29.42TL40-8M-30F 1F 40 1615 101.86 100.49 106 - - 38 - 38 2 £32.66TL44-8M-30F 2F 44 2012 112.05 110.67 120 - 86 38 - 32 2 £37.29TL48-8M-30F 2F 48 2012 122.23 120.86 128 - 90 38 - 32 2 £41.73TL56-8M-30F 2F 56 2012 142.60 141.23 150 - 110 38 - 32 2 £53.80TL64-8M-30F 5F 64 2517 162.97 161.60 168 125 - 38 45 - 2 £63.75TL72-8M-30F 6F 72 2517 183.35 181.97 192 125 158 38 45 - 2 £75.28
PartNumber
Material Steel with Steel flanges.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Execution 2F Execution 1F Execution 5F Execution 6F
Df d0 dk Di
FS
Df d0 dk
F
Df d0 dk Dm
FL
Did0
dkDm
L
Df
F
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys with Taper Bore8mm Pitch - To Suit 50mm Wide Belts
P U L L E Y S & B E LT SHTD 8M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
ToSuitBush
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
RecessDia.Di
FaceWidth
F
Overall Width
L SNo. ofFlanges
PriceEach1 - 5
TL28-8M-50F 2F 28 1210 71.30 70.08 75 - 50 60 - 25 2 £26.64TL30-8M-50F 2F 30 1615 76.39 75.13 83 - 58 60 - 38 2 £29.23TL32-8M-50F 2F 32 1615 81.49 80.16 87 - 63 60 - 38 2 £32.66TL34-8M-50F 2F 34 1615 86.58 85.22 91 - 65 60 - 38 2 £33.48TL36-8M-50F 2F 36 1615 91.67 90.30 97 - 68 60 - 38 2 £35.46TL38-8M-50F 2F 38 1615 96.77 95.39 102 - 72 60 - 38 2 £39.87TL40-8M-50F 3F 40 2012 101.86 100.49 106 - 80 60 - 32 2 £41.54TL44-8M-50F 3F 44 2012 112.05 110.67 120 - 86 60 - 32 2 £46.62TL48-8M-50F 3F 48 2012 122.23 120.86 128 - 95 60 - 32 2 £54.33TL56-8M-50F 3F 56 2517 142.60 141.23 150 - 116 60 - 45 2 £67.72TL64-8M-50F 3F 64 2517 162.97 161.60 168 - 136 60 - 45 2 £81.30TL72-8M-50F 10F 72 2517 183.35 181.97 192 125 158 60 - 45 2 £95.28TL80-8M-50 4 80 3020 203.72 202.35 - - 180 60 - 51 0 £106.12TL90-8M-50 11 90 3020 229.18 227.81 - 160 204 60 - 51 0 £121.05TL112-8M-50 11 112 3020 285.21 283.83 - 170 254 60 - 51 0 £150.03TL144-8M-50 12 144 3020 366.69 365.32 - 170 336 60 - 51 0 £191.01TL168-8M-50 13 168 3525 427.81 426.44 - 198 395 60 65 - 0 £269.10TL192-8M-50 13 192 3525 488.92 487.55 - 198 455 60 65 - 0 £325.80
PartNumber
Material Execution 2F, 3F & 10F: Steel with Steel flanges.Execution 4, 11, 12 & 13: Cast Iron.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Execution 4 Execution 11 Execution 12 Execution 13
Df d0 dk Di
FS
Df d0 dk Dm
SF
Did0
dk
Dm
Df
F
Execution 2F Execution 3F Execution 10F
S
d0 dk Di
F
S
Did0
dk
Dm
LF
Did0
dkDm
FS
Did0
dk
Dm
FS
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Rubber Timing Pulley Belts8mm Pitch - 20mm Wide
P U L L E Y S & B E LT SHTD 8M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialRubber back/teeth, glass fibre reinforced, nylon fabric tooth facing toDIN / ISO 5296.
Options20, 30 & 50mm wide belts supplied as standard. 88mm belt widths also available. P.O.A.Other belt lengths also available. P.O.A.
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-1200-8M/20 1200 150 £16.22HTD-1280-8M/20 1280 160 £17.07HTD-1440-8M/20 1440 180 £18.49HTD-1600-8M/20 1600 200 £20.19HTD-1760-8M/20 1760 220 £21.67HTD-1800-8M/20 1800 225 £22.14HTD-2000-8M/20 2000 250 £24.47HTD-2400-8M/20 2400 300 £28.69HTD-2800-8M/20 2800 350 £32.85
PartNumber Length
No. ofTeeth
PriceEach1 - 5
HTD-480-8M/20 480 60 £8.25HTD-560-8M/20 560 70 £9.48HTD-600-8M/20 600 75 £9.85HTD-640-8M/20 640 80 £10.30HTD-720-8M/20 720 90 £11.18HTD-800-8M/20 800 100 £11.81HTD-880-8M/20 880 110 £12.60HTD-960-8M/20 960 120 £13.51HTD-1040-8M/20 1040 130 £14.55HTD-1120-8M/20 1120 140 £15.30
3.46
8
Discounts: 6+ -7% | 20+ -14% | 40+ -20% | 60+ -24% | 100+ -27%
HTD Rubber Timing Pulley Belts8mm Pitch - 30mm Wide
P U L L E Y S & B E LT SHTD 8M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialRubber back/teeth, glass fibre reinforced, nylon fabric tooth facing toDIN / ISO 5296.
Options20, 30 & 50mm wide belts supplied as standard. 88mm belt widths also available. P.O.A.Other belt lengths also available. P.O.A.
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-1200-8M/30 1200 150 £24.47HTD-1280-8M/30 1280 160 £25.89HTD-1440-8M/30 1440 180 £28.12HTD-1600-8M/30 1600 200 £30.39HTD-1760-8M/30 1760 220 £33.04HTD-1800-8M/30 1800 225 £33.57HTD-2000-8M/30 2000 250 £37.04HTD-2400-8M/30 2400 300 £43.43HTD-2800-8M/30 2800 350 £49.54
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-480-8M/30 480 60 £12.75HTD-560-8M/30 560 70 £14.45HTD-600-8M/30 600 75 £14.83HTD-640-8M/30 640 80 £15.59HTD-720-8M/30 720 90 £16.88HTD-800-8M/30 800 100 £18.11HTD-880-8M/30 880 110 £19.15HTD-960-8M/30 960 120 £20.44HTD-1040-8M/30 1040 130 £21.86HTD-1120-8M/30 1120 140 £23.27
3.46
8
Discounts: 6+ -7% | 20+ -14% | 40+ -20% | 60+ -24% | 100+ -27%
HTD Rubber Timing Pulley Belts8mm Pitch - 50mm Wide
P U L L E Y S & B E LT SHTD 8M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialRubber back/teeth, glass fibre reinforced, nylon fabric tooth facing toDIN / ISO 5296.
Options20, 30 & 50mm wide belts supplied as standard. 88mm belt widths also available. P.O.A.Other belt lengths also available. P.O.A.
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-1200-8M/50 1200 150 £41.48HTD-1280-8M/50 1280 160 £43.72HTD-1440-8M/50 1440 180 £47.65HTD-1600-8M/50 1600 200 £51.69HTD-1760-8M/50 1760 220 £55.81HTD-1800-8M/50 1800 225 £57.04HTD-2000-8M/50 2000 250 £62.59HTD-2400-8M/50 2400 300 £73.45HTD-2800-8M/50 2800 350 £84.07
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-480-8M/50 480 60 £21.57HTD-560-8M/50 560 70 £24.47HTD-600-8M/50 600 75 £25.04HTD-640-8M/50 640 80 £26.46HTD-720-8M/50 720 90 £28.63HTD-800-8M/50 800 100 £30.77HTD-880-8M/50 880 110 £32.28HTD-960-8M/50 960 120 £34.71HTD-1040-8M/50 1040 130 £37.17HTD-1120-8M/50 1120 140 £36.35
3.46
8
Discounts: 6+ -7% | 20+ -14% | 40+ -20% | 60+ -24% | 100+ -27%
HTD Timing Pulleys14mm Pitch - To Suit 40mm Wide Belts
P U L L E Y S & B E LT SHTD 14M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
FaceWidth
F
Overall Width
LBore
dNo. of
Flanges
PriceEach1 - 5
P28-14M-40F 1F 28 124.78 122.12 128 100 54 69 24 2 £45.58P29-14M-40F 1F 29 129.23 126.57 138 100 54 69 24 2 £81.52P30-14M-40F 1F 30 133.69 130.99 138 100 54 69 24 2 £53.20P32-14M-40F 1F 32 142.60 139.88 154 100 54 69 24 2 £61.36P34-14M-40F 1F 34 151.52 148.79 160 100 54 69 24 2 £66.27P36-14M-40F 1F 36 160.43 157.68 168 100 54 69 24 2 £75.28P38-14M-40F 1F 38 169.34 166.60 183 120 54 69 24 2 £86.37P40-14M-40F 1F 40 178.25 175.49 188 120 54 69 24 2 £94.40P44-14M-40F 1F 44 196.08 193.28 211 120 54 69 24 2 £109.87P48-14M-40F 2F 48 213.90 211.11 226 135 54 69 24 2 £129.55P56-14M-40F 2F 56 249.55 246.76 256 135 54 69 28 2 £164.68P64-14M-40F 2F 64 285.21 282.41 296 135 54 69 28 2 £189.31P72-14M-40 4 72 320.86 318.06 - 135 54 69 28 0 £167.51P80-14M-40 4 80 356.51 353.71 - 135 54 69 28 0 £183.48P90-14M-40 4 90 401.07 398.28 - 135 54 69 28 0 £203.45P112-14M-40 4 112 499.11 496.32 - 135 54 69 28 0 £217.47P144-14M-40 4 144 641.71 638.92 - 135 54 69 28 0 £303.56P168-14M-40 4 168 748.66 745.87 - 135 54 69 28 0 £314.55
PartNumber
Material Execution 1F & 2F: Steel with Steel flanges.Execution 4: Cast Iron.
OptionsOther sizes available. P.O.A.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Df
d0dk
Dm
L
d
F
d0dk
Dm
L
d
F
Df d0 dk Dm
L
d
F
Execution 1F Execution 2F Execution 4 Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys14mm Pitch - To Suit 55mm Wide Belts
P U L L E Y S & B E LT SHTD 14M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
Execution 1F Execution 6F Execution 5
TypeNo. of Teeth
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
FaceWidth
F
Overall Width
LBore
dNo. of
Flanges
PriceEach1 - 5
P28-14M-55F 1F 28 124.78 122.12 128 100 70 85 24 2 £56.82P29-14M-55F 1F 29 129.23 126.57 138 100 70 85 24 2 £96.67P30-14M-55F 1F 30 133.69 130.99 138 100 70 85 24 2 £64.76P32-14M-55F 1F 32 142.60 139.88 154 100 70 85 24 2 £73.26P34-14M-55F 1F 34 151.52 148.79 160 100 70 85 24 2 £80.98P36-14M-55F 1F 36 160.43 157.68 168 100 70 85 24 2 £92.70P38-14M-55F 1F 38 169.34 166.60 183 120 70 85 24 2 £104.42P40-14M-55F 1F 40 178.25 175.49 188 120 70 85 24 2 £114.78P44-14M-55F 1F 44 196.08 193.28 211 120 70 85 24 2 £131.29P48-14M-55F 6F 48 213.90 211.11 226 135 70 70 24 2 £154.00P56-14M-55F 6F 56 249.55 246.76 256 135 70 70 28 2 £192.15P64-14M-55F 6F 64 285.21 282.41 296 135 70 70 28 2 £195.93P72-14M-55 5 72 320.86 318.06 - 135 70 70 28 0 £198.67P80-14M-55 5 80 356.51 353.71 - 135 70 70 28 0 £219.33P90-14M-55 5 90 401.07 398.28 - 135 70 70 28 0 £244.56P112-14M-55 5 112 499.11 496.32 - 135 70 70 28 0 £260.59P144-14M-55 5 144 641.71 638.92 - 135 70 70 28 0 £391.73P168-14M-55 5 168 748.66 745.87 - 135 70 70 28 0 £509.32P192-14M-55 5 192 855.62 852.82 - 135 70 70 28 0 £624.64P216-14M-55* 5 216 962.57 959.76 - 150 70 70 28 0 £P.O.A
PartNumber
Material Execution 1F & 6F: Steel with Zinc Plated Steel flanges.Execution 5: Cast Iron.
OptionsOther sizes available. P.O.A.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
* Made to Order
Df d0 dk Dm
L
d
F
Df
d0dk
DmDid
F
d0dk
DmDid
F
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys14mm Pitch - To Suit 85mm Wide Belts
P U L L E Y S & B E LT SHTD 14M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
FaceWidth
F
Overall Width
LBore
dNo. of
Flanges
PriceEach1 - 5
P28-14M-85F 1F 28 124.78 122.12 128 100 70 85 24 2 £71.88P29-14M-85F 1F 29 129.23 126.57 138 100 70 85 24 2 £78.52P30-14M-85F 1F 30 133.69 130.99 138 100 70 85 24 2 £85.14P32-14M-85F 1F 32 142.60 139.88 154 100 70 85 24 2 £96.35P34-14M-85F 1F 34 151.52 148.79 160 100 70 85 24 2 £106.97P36-14M-85F 1F 36 160.43 157.68 168 100 70 85 24 2 £123.88P38-14M-85F 1F 38 169.34 166.60 183 120 70 85 24 2 £138.41P40-14M-85F 1F 40 178.25 175.49 188 120 70 85 24 2 £153.49P44-14M-85F 1F 44 196.08 193.28 211 120 70 85 24 2 £174.28P48-14M-85F 6F 48 213.90 211.11 226 135 70 70 24 2 £225.41P56-14M-85F 6F 56 249.55 246.76 256 135 70 70 28 2 £277.54P64-14M-85F 6F 64 285.21 282.41 296 135 70 70 28 2 £285.98P72-14M-85 5 72 320.86 318.06 - 135 70 70 28 0 £299.25P80-14M-85 5 80 356.51 353.71 - 135 70 70 28 0 £330.12P90-14M-85 5 90 401.07 398.28 - 135 70 70 28 0 £369.27P112-14M-85 5 112 499.11 496.32 - 135 70 70 28 0 £392.14P144-14M-85 5 144 641.71 638.92 - 135 70 70 28 0 £499.65P168-14M-85 5 168 748.66 745.87 - 135 70 70 28 0 £665.84P192-14M-85 5 192 855.62 852.82 - 135 70 70 28 0 £794.74P216-14M-85* 5 216 962.57 959.76 - 150 70 70 28 0 £P.O.A
PartNumber
Material Execution 1F & 6F: Steel with Zinc Plated Steel flanges.Execution 5: Cast Iron.
OptionsOther sizes available. P.O.A.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
* Made to Order
Execution 1F Execution 6F Execution 5
Df d0 dk Dm
L
d
F
Df
d0dk
DmDid
F
d0dk
DmDid
F
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys with Taper Bore14mm Pitch - To Suit 40mm Wide Belts
P U L L E Y S & B E LT SHTD 14M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
ToSuitBush
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
RecessDia.Di
FaceWidth
F SNo. ofFlanges
PriceEach1 - 5
TL28-14M-40F 3F 28 2012 124.78 122.12 128 - 94 54 32 2 £57.51TL29-14M-40F 3F 29 2012 129.23 126.57 138 - 98 54 32 2 £65.01TL30-14M-40F 3F 30 2012 133.69 130.99 138 - 98 54 32 2 £71.25TL32-14M-40F 3F 32 2012 142.60 139.88 154 - 108 54 32 2 £73.64TL34-14M-40F 3F 34 2517 151.52 148.79 160 - 110 54 45 2 £74.27TL36-14M-40F 3F 36 2517 160.43 157.68 168 - 120 54 45 2 £78.81TL38-14M-40F 3F 38 2517 169.34 166.60 183 - 130 54 45 2 £80.70TL40-14M-40F 3F 40 2517 178.25 175.49 188 - 138 54 45 2 £88.13TL44-14M-40F 3F 44 3020 196.08 193.28 211 - 155 54 51 2 £108.83TL48-14M-40F 3F 48 3020 213.90 211.11 226 - 170 54 51 2 £145.02TL56-14M-40F 3F 56 3020 249.55 246.76 256 - 208 54 51 2 £182.57TL64-14M-40F 10F 64 3020 285.21 282.41 296 170 240 54 51 2 £223.90TL72-14M-40 11 72 3020 320.86 318.06 - 170 280 54 51 0 £174.38TL80-14M-40 12 80 3020 356.51 353.71 - 170 315 54 51 0 £189.31TL90-14M-40 12 90 3020 401.07 398.28 - 170 360 54 51 0 £210.92
PartNumber
Material Execution 3F: Steel with Steel flanges.Execution 10F, 11 & 12: Cast Iron.
OptionsOther sizes available. P.O.A.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Execution 3F Execution 10F Execution 11 Execution 12
Df d0 dk Dm
SF
Did0dk
Dm
Df
FS
Did0dk
Dm
FS
Did0
dkDm
FS
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys with Taper Bore14mm Pitch - To Suit 55mm Wide Belts
P U L L E Y S & B E LT SHTD 14M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
ToSuitBush
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
RecessDia.Di
FaceWidth
F SNo. ofFlanges
PriceEach1 - 5
TL28-14M-55F 3F 28 2012 124.78 122.12 128 - 94 70 32 2 £75.22TL29-14M-55F 3F 29 2012 129.23 126.57 138 - 100 70 32 2 £77.77TL30-14M-55F 3F 30 2517 133.69 130.99 138 - 100 70 45 2 £78.97TL32-14M-55F 3F 32 2517 142.60 139.88 154 - 108 70 45 2 £80.48TL34-14M-55F 3F 34 2517 151.52 148.79 160 - 110 70 45 2 £85.55TL36-14M-55F 3F 36 2517 160.43 157.68 168 - 120 70 45 2 £91.22TL38-14M-55F 3F 38 2517 169.34 166.60 183 - 130 70 45 2 £96.76TL40-14M-55F 3F 40 2517 178.25 175.49 188 - 138 70 45 2 £105.36TL44-14M-55F 3F 44 3020 196.08 193.28 211 - 155 70 51 2 £129.30TL48-14M-55F 3F 48 3020 213.90 211.11 226 - 170 70 51 2 £175.95TL56-14M-55F 3F 56 3020 249.55 246.76 256 - 208 70 51 2 £218.48TL64-14M-55F 10F 64 3020 285.21 282.41 296 170 240 70 51 2 £275.94TL72-14M-55 11 72 3020 320.86 318.06 - 170 280 70 51 0 £198.45TL80-14M-55 12 80 3020 356.51 353.71 - 170 315 70 51 0 £216.65TL90-14M-55 12 90 3020 401.07 398.28 - 170 360 70 51 0 £250.55
PartNumber
Material Execution 3F & 10F: Steel with Steel flanges.Execution 11 & 12: Cast Iron.
OptionsOther sizes available. P.O.A.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Execution 3F Execution 10F Execution 11 Execution 12
Df d0 dk Dm
SF
Did0dk
Dm
Df
FS
Did0dk
Dm
FS
Did0
dkDm
FS
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Timing Pulleys with Taper Bore14mm Pitch - To Suit 85mm Wide Belts
P U L L E Y S & B E LT SHTD 14M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
TypeNo. of Teeth
ToSuitBush
PCDd0
Tip Dia.dk
FlangeDia.Df
HubDia.Dm
RecessDia.Di
FaceWidth
F SNo. ofFlanges
PriceEach1 - 5
TL28-14M-85F 3F 28 2517 124.78 122.12 128 - 98 102 45 2 £87.79TL29-14M-85F 3F 29 2517 129.23 126.57 138 - 100 102 45 2 £92.89TL30-14M-85F 3F 30 2517 133.69 130.99 138 - 100 102 45 2 £95.28TL32-14M-85F 3F 32 2517 142.60 139.88 154 - 108 102 45 2 £100.48TL34-14M-85F 3F 34 2517 151.52 148.79 160 - 110 102 45 2 £112.92TL36-14M-85F 3F 36 3020 160.43 157.68 168 - 125 102 51 2 £126.69TL38-14M-85F 3F 38 3020 169.34 166.60 183 - 130 102 51 2 £131.16TL40-14M-85F 3F 40 3020 178.25 175.49 188 - 138 102 51 2 £143.60TL44-14M-85F 3F 44 3020 196.08 193.28 211 - 153 102 51 2 £170.47TL48-14M-85F 3F 48 3020 213.90 211.11 226 - 171 102 51 2 £235.52TL56-14M-85F 3F 56 3525 249.55 246.76 256 - 210 102 65 2 £301.07TL64-14M-85F 10F 64 3525 285.21 282.41 296 190 240 102 65 2 £332.48TL72-14M-85 11 72 3525 320.86 318.06 - 190 280 102 65 0 £342.31TL80-14M-85 12 80 3525 356.51 353.71 - 190 315 102 65 0 £352.20TL90-14M-85 12 90 3525 401.07 398.28 - 190 360 102 65 0 £363.54
PartNumber
Material Execution 3F: Steel with Steel flanges.Execution 10F, 11 & 12: Cast Iron.
OptionsOther sizes available. P.O.A.
Other Info. All dimensions subject to change. If a dimension is critical to your application, please contact Sales for confirmation.
Execution 3F Execution 10F Execution 11 Execution 12
Df d0 dk Dm
SF
Did0dk
Dm
Df
FS
Did0dk
Dm
FS
Did0
dkDm
FS
Discounts: 6+ -12% | 20+ -25% | 40+ -33% | 60+ -37% | 100+ -42%
HTD Rubber Timing Pulley Belts14mm Pitch - 40mm Wide
P U L L E Y S & B E LT SHTD 14M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialRubber back/teeth, glass fibre reinforced, nylon fabric tooth facing toDIN / ISO 5296.
Options40, 55 & 85mm wide belts supplied as standard. 115 & 170mm belt widths also available. P.O.A.Other belt lengths also available. P.O.A.
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-2450-14M/40 2450 175 £110.06HTD-2590-14M/40 2590 185 £111.95HTD-2800-14M/40 2800 200 £121.30HTD-3150-14M/40 3150 225 £127.82HTD-3500-14M/40 3500 250 £139.45HTD-3850-14M/40 3850 275 £153.24HTD-4326-14M/40 4326 309 £169.47HTD-4578-14M/40 4578 327 £176.33
PartNumber Length
No. ofTeeth
PriceEach1 - 5
HTD-966-14M/40 966 69 £64.10HTD-1190-14M/40 1190 85 £71.06HTD-1400-14M/40 1400 100 £75.72HTD-1610-14M/40 1610 115 £82.56HTD-1764-14M/40 1764 126 £88.64HTD-1778-14M/40 1778 127 £89.33HTD-1890-14M/40 1890 135 £91.85HTD-2100-14M/40 2100 150 £98.62HTD-2310-14M/40 2310 165 £105.36
610
14
Discounts: 6+ -7% | 20+ -14% | 40+ -20% | 60+ -24% | 100+ -27%
HTD Rubber Timing Pulley Belts14mm Pitch - 55mm Wide
P U L L E Y S & B E LT SHTD 14M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialRubber back/teeth, glass fibre reinforced, nylon fabric tooth facing toDIN / ISO 5296.
Options40, 55 & 85mm wide belts supplied as standard. 115 & 170mm belt widths also available. P.O.A.Other belt lengths also available. P.O.A.
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-2450-14M/55 2450 175 £152.39HTD-2590-14M/55 2590 185 £156.61HTD-2800-14M/55 2800 200 £169.28HTD-3150-14M/55 3150 225 £182.51HTD-3500-14M/55 3500 250 £196.21HTD-3850-14M/55 3850 275 £212.90HTD-4326-14M/55 4326 309 £235.80HTD-4578-14M/55 4578 327 £246.99
PartNumber Length
No. ofTeeth
PriceEach1 - 5
HTD-966-14M/55 966 69 £90.15HTD-1190-14M/55 1190 85 £97.20HTD-1400-14M/55 1400 100 £106.31HTD-1610-14M/55 1610 115 £116.07HTD-1764-14M/55 1764 126 £124.11HTD-1778-14M/55 1778 127 £125.08HTD-1890-14M/55 1890 135 £129.78HTD-2100-14M/55 2100 150 £138.88HTD-2310-14M/55 2310 165 £147.51
610
14
Discounts: 6+ -7% | 20+ -14% | 40+ -20% | 60+ -24% | 100+ -27%
HTD Rubber Timing Pulley Belts14mm Pitch - 85mm Wide
P U L L E Y S & B E LT SHTD 14M
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialRubber back/teeth, glass fibre reinforced, nylon fabric tooth facing toDIN / ISO 5296.
Options40, 55 & 85mm wide belts supplied as standard. 115 & 170mm belt widths also available. P.O.A.Other belt lengths also available. P.O.A.
PartNumber
BeltLength
No. ofTeeth
PriceEach1 - 5
HTD-2450-14M/85 2450 175 £237.95HTD-2590-14M/85 2590 185 £244.72HTD-2800-14M/85 2800 200 £270.52HTD-3150-14M/85 3150 225 £277.35HTD-3500-14M/85 3500 250 £305.26HTD-3850-14M/85 3850 275 £330.87HTD-4326-14M/85 4326 309 £363.03HTD-4578-14M/85 4578 327 £380.96
PartNumber Length
No. ofTeeth
PriceEach1 - 5
HTD-966-14M/85 966 69 £147.51HTD-1190-14M/85 1190 85 £152.39HTD-1400-14M/85 1400 100 £166.57HTD-1610-14M/85 1610 115 £180.55HTD-1764-14M/85 1764 126 £190.29HTD-1778-14M/85 1778 127 £191.80HTD-1890-14M/85 1890 135 £198.54HTD-2100-14M/85 2100 150 £215.27HTD-2310-14M/85 2310 165 £223.96
610
14
Discounts: 6+ -7% | 20+ -14% | 40+ -20% | 60+ -24% | 100+ -27%
Taper BushesTo Suit Various Timing Pulleys
P U L L E Y S & B E LT STLB
Type
BushLength
L
OutsideDia.ØD
Grubscrew/CapheadSize (BSW)
Grubscrew/CapheadTorque (Nm)
Approx.Weight
(Kg)PriceEach
Available Bore SizesØd
TLB-1008-xx A 22 35.0 1⁄4" x 1⁄2" 5.6 0.11 10 11 12 14 15 16 18 19 20 22 24 25 £3.37TLB-1108-xx A 22 38.0 1⁄4" x 1⁄2" 5.6 0.12 10 11 12 14 15 16 18 19 20 22 24 25 28 £3.81TLB-1210-xx A 25 47.5 3⁄8" x 5⁄8" 19.6 0.23 11 12 14 15 16 18 19 20 22 24 25 26 28 30 32 £4.91TLB-1215-xx A 38 47.5 3⁄8" x 5⁄8" 19.6 0.35 12 14 16 18 19 20 22 24 25 26 28 30 32 £5.38TLB-1310-xx A 25 50.0 3⁄8" x 5⁄8" 19.6 0.35 14 16 18 19 20 22 24 25 28 30 32 35 £5.44TLB-1610-xx A 25 57.0 3⁄8" x 5⁄8" 19.6 0.35 12 14 16 18 19 20 22 24 25 28 30 32 35 38 40 42 £5.44TLB-1615-xx A 38 57.0 3⁄8" x 5⁄8" 19.6 0.45 14 15 16 18 19 20 22 24 25 26 28 30 32 35 38 40 42 £6.20TLB-2012-xx A 32 70.0 7⁄16" x 7⁄8" 30.4 0.68 14 16 18 19 20 22 24 25 28 30 32 35 38 40 42 45 48 50 £7.08TLB-2517-xx A 45 85.5 1⁄2" x 1" 48.0 1.50 16 18 19 20 22 24 25 28 30 32 35 38 40 42 45 48 50 55 60 65 £10.58TLB-3020-xx A 51 108.0 5⁄8" x 11⁄4" 90.0 1.90 25 28 30 32 35 38 40 42 45 48 50 55 60 65 70 75 £17.41TLB-3030-xx A 76 108.0 5⁄8" x 11⁄2" 90.0 2.70 35 38 42 45 48 50 55 60 65 70 75 £26.90TLB-3525-xx B 65 127.0 1⁄2" x 11⁄2" 113.0 3.60 35 38 40 42 45 48 50 55 60 65 70 75 80 85 90 £32.00TLB-3535-xx B 89 127.0 1⁄2" x 11⁄2" 113.0 4.00 35 38 40 42 45 48 50 55 60 65 70 75 80 85 90 £42.46TLB-4030-xx B 76 146.0 5⁄8" x 11⁄2" 169.0 5.00 40 42 45 48 50 55 60 65 70 75 80 85 90 £51.53TLB-4040-xx B 102 146.0 5⁄8" x 13⁄4" 169.0 7.70 40 42 45 48 50 55 60 65 70 75 80 85 90 100 £58.14TLB-4545-xx B 115 162.0 3⁄4" x 2" 192.0 10.00 60 65 70 75 80 85 90 95 100 105 110 £84.70TLB-5050-xx B 127 177.6 7⁄8" x 21⁄4" 272.0 14.00 75 80 85 90 95 100 105 110 115 120 125 £112.36
PartNumber
ØD Ød
L
Type A (3 Holes) Type B (5 Holes)
Material Sintered Iron
OrderingWhen ordering taper bushes, please replace the xx with one of the availablebore sizes, eg. a TLB-1008-xx with a 10mm bore will be TLB-1008-10.
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
