HSV SERIESHSV SERIES

The Jarecki HSV Series are severe service ball valves made from heavy walled American castings.

They provide the tightest shuttoff for the longest period of time in very sever applications. The

HSV is designed and built to withstand temperature fluctuations, pressure surges, and abrasion

better than any other valve on the market.

Two Piece Ball and Stem

• Allows for effective sealing against back

pressure

• Ease of disassembly and repair

Unique Seat Design

• Guards seat seal from sudden pressure

surges

• provides for long lasting, positive shut-off

Tight Shut-Off

• Class V shut-off is our standard

• Class VI available upon request

One Source Supplier

• Jarecki produces 1/2" to 24" ball valves

• Metal and soft seated ball valves

• Valves in pressure classes 150# to 4500#

• Supplier of actuation and the required

coupling

Superior Quality Control

• On every valve, both a hydrostatic test and

a seat leakage test are performed

Impressive Stem Design

• Our stems will withstand high torque in

rough applications without shearing.

• Blow-Out proof design insures workman

safety

Quick Deliveries

Valve Rebuilding

• Send almost any style or make of valve

to our rebuilding department for

inexpensive valve repair

• Jarecki Valves can convert TFE seated

ball valves to metal seated ball valves

Packing Design

• Long lasting adjustable packing helps

insure a leak free environment

• Superior packing design protects packing

from extrusion and flow media, adding to

longer sealing life.

Gland bearing prevents

lateral stem movement while

stroking the valve, extending

valve stem packing life.

INDUSTRIESINDUSTRIES

Power PlantsPower Plants

Fly Ash Service: The CF8M Castings contain a specific ferrite content for high temperature service.

They are proven in the field up to 1700 Deg F.

Pulp & PaperPulp & Paper

Green Liquor, White Liquor, Chlorine: The heavy duty body and body bolting eliminate any

negative effects of piping stress. The competition uses two identical body halves with a stem ball.

This requires two seals, a thin C-Shaped body gasket, and a bonnet gasket. The Jarecki Valve only

requires one complete flexitallic body gasket, reducing the chance of body leakage. A two piece

ball and stem is used to minimize stem packing leakage.

Chemical IndustryChemical Industry

Emulsions, Acids, Caustics: The HSV Series is available in a number of exotic alloys for a variety

of different applications.

Oversized bolting is used to provide strength to the two-piece

body design. Metal to metal contact between the tailpieces and

the body, along with a tailpiece locator eliminate piping stresses

on the body gasket which lead to leakage.

Live loaded packing system keeps compression on stem packing during temperature and pressure cycles

G Seal G Seal -- Graphite Sealed SeatGraphite Sealed Seat

A series of Graphite seal rings behind the metal seat,

coupled with a Graphite outer diameter seat seal,

prevent media from building up behind the seat. The

rings also allow for expansion of the internal valve

components in high temperature applications.

Temperature Range: 200 to 1200 deg F

Application: Steam, Abrasion, High Temperatures,

Fine Solids

Shut-Off: Class V

O Seal O Seal -- Graphite Sealed SeatGraphite Sealed Seat

A double seal design providing both spring loading

and excellent sealing capabilities. There is no area

for media to build up behind the seat, which prevents

the valve from locking up.

Temperature Range: -150 to 650 deg F

Application: Steam, Abrasion, Low Pressure

Differentials, Fine Solids, Emulsions

Shut-Off: Class V, Class VI, Bubble Tight

P Seat P Seat -- Spring LoadedSpring Loaded

For unidirectional applications. The sealing seat is

available as a separate seat ring for reparability, or

integral with the tailpiece for high temperature

applications. The spring seat OD seal prevents

media from building up between the spring and the

back of the seat.

Temperature Range: 400 to 1650 deg F

Application: Steam, Low Pressure Differentials,

High Temperatures

Shut-Off: Class V, Class VI, Bubble Tight

T Seat T Seat -- Reinforced TFE SeatReinforced TFE Seat

A glass filled TFE is used typically used for most

applications. A metal filled TFE Seat is available for

increased abrasion resistance and reduction to cold

flow. The metal filled seat is excellent for tight sealing

in higher pressure classes without the need of a

trunnion mounted valve.

Temperature Range: -250 to 450 deg F

Application: Steam, Low Pressure Differentials,

Emulsions, Nonabrasive Media

Shut-Off: Bubble Tight

SPECIFICATIONSSPECIFICATIONS

ANSI B16.34

ANSI B16.10

ANSI B16.5

ANSI/FCI 70-2-1976

*Jarecki Valves Can Comply With The Above Specifications Per Request

*NACE MR-01-75

*API 607

*API 598

*MSS-SP-72

SEAT STYLESSEAT STYLES

GRAFOIL GRAFOIL

SIZE A B (Dia) C D E F (Dia) N W (Dia) S (Dia) CV WEIGHT

1/2 4.25 0.59 1.79 5.32 3.23 3.50 4 0.63 2.38 15 5

3/4 4.60 0.79 2.01 5.32 3.39 3.85 4 0.63 2.75 40 7

1 5.00 0.99 2.05 6.50 3.86 4.25 4 0.63 3.13 70 10

1 1/2 6.50 1.58 2.52 7.87 4.69 5.00 4 0.63 3.88 240 17

2 7.00 2.00 3.07 7.87 5.04 6.00 4 0.75 4.75 400 23

3 8.00 2.99 3.74 15.00 7.38 7.46 4 0.75 6.00 980 50

4 9.00 4.00 4.47 15.00 7.88 9.02 8 0.75 7.50 1,700 80

6 15.50 5.98 7.76 28.80 8.63 10.98 8 0.87 9.55 5,000 142

8 18.00 7.81 8.35 28.80 11.44 13.50 8 0.87 11.75 10,000 300

10 21.00 9.84 10.47 38.00 14.38 15.98 12 1.00 14.25 15,000 515

12 24.00 11.81 12.01 38.00 16.13 19.02 12 1.00 17.00 21,000 720

ANSI CLASS 150

No Description Carbon Steel Stainless Steel

1 Body wcb216 cf8ma351

2 Tailpiece wcb216 cf8ma351

3 Ball 316 sst 316 sst

4 Seat rtfe or stellite rtfe or stellite

5 Body Gasket tfe or grafoil tfe or grafoil

6 Stem 316sst/17-4sst 316sst/17-4sst

7 Thrust Washer tfe/stellite tfe/stellite

8 Stem Packing tfe/grafoil tfe/grafoil

9 Snap Ring sk5 sk5

10 Gland carbon Steel 304 sst

11 Belleville carbon Steel 17-4 sst

12 Retainer Nut a194 gr 2h a194 gr 8m

13 Lock Washer 304 sst 304 sst

14 Lever ductile Iron ductile Iron

15 Bolt,Body Stud a193 gr b7 a193 gr b8m

16 Stop Plate carbon Steel 304 sst

17 Body Nut a194 gr 2h a194 gr 8m

18 Lever Stop carbon Steel 304 sst

Valve Sizes ½” to 2”Valve Sizes ½” to 2”

Valve Sizes 3” to 12”Valve Sizes 3” to 12”

SIZE A B (Dia) C D E F (Dia) N W (Dia) S (Dia) CV WEIGHT

1/2 5.50 0.59 2.64 5.32 3.23 3.75 4 0.63 2.63 15 6

3/4 6.00 0.79 2.51 5.32 3.39 4.63 4 0.75 3.25 40 8

1 6.50 0.99 2.56 6.50 3.86 4.87 4 0.75 3.50 70 12

1 1/2 7.50 1.58 2.76 7.87 4.69 6.13 4 0.88 4.50 240 21

2 8.50 2.00 3.20 7.87 5.04 6.50 8 0.75 5.00 400 36

3 11.12 2.99 5.57 15.00 7.38 8.25 8 0.88 6.63 980 55

4 12.00 4.00 5.97 15.00 7.88 10.00 8 0.88 7.88 1,700 93

6 15.88 5.98 7.60 30.00 8.63 12.50 12 0.88 10.63 5,000 237

8 16.50 7.81 9.33 30.00 11.44 15.00 12 1.00 13.00 10,000 440

10 22.38 9.84 12.28 38.00 14.38 17.50 16 1.25 15.25 15,000 715

12 25.50 11.81 12.75 38.00 16.13 20.50 16 1.25 17.75 21,000 985

ANSI CLASS 300

HSV SERIESHSV SERIES