HSK-Tツーリングシステム - global.kyocera.com ·...
Transcript of HSK-Tツーリングシステム - global.kyocera.com ·...
複合加工機用旋削工具 [ HSK-T規格 ] Tool for Turning Mill [HSK-T Standard]
1)複合加工機とは、旋削機能とミーリング機能を併せ持った工作機械のことを指しています。 この複合加工機の旋削工具用インターフェイス(刃物台とバイトホルダ等との締結部分:フライスのアーバに相当)として、ICTM規格に基づく旋削工具を標準化しました。
2)ICTM規格とは、マシニングセンタ用アーバで使用されています2面拘束のISO規格『ISO12164-1:2001 HSK規格シャンク』を基本に、複合加工機の旋削工具用インターフェイスとして、国内メーカ16社で共同開発した複合加工機用の規格です。
3)この規格は2008年にISO規格『ISO12164-3:2008』として国際標準規格となりました。呼称表記はHSK-T○○です。
1) Turning mill is the machine tool which combines turning and milling functions. Now the interface (joint part of toolpost and toolholder) for the turning mill meeting ICTM standard is available.
2) ICTM standard is the standard developed by 16 companies in Japan as the interface of turning mill machine based on the two-face restraint type standard "ISO 12164-1:2001 HSK Standard Shank".
3) This standard became an International Standard as ISO Standard “ISO12164-3: 2008” in 2008.Description is shown as HSK-T○○.
●特長 Features
①マシニングセンタ用のHSK-Aタイプと互換性が有ります。Compatible with HSK-A type for Machining Center
②ホルダ側ドライブキー溝と刃物台側のドライブキーのスキマを最小限に設定し、旋削加工時の加工精度を向上しました。
Machining precision at turning has improved by minimizing the gap between the drive key slot at toolholder side and the drive key at toolpost side.
■複合加工機用旋削工具について Tool for Turning Mill
旋削工具用ホルダ(HSK-Tタイプ:ISO規格)
Toolholder for Turning (HSK-T type:ISO standard)
(互換性有り)Compatible
マシニングセンタMachining Center
HSK主軸HSK Spindle
インターフェイス部分Interface
主軸 Spindle
回転工具用ホルダ(HSK-Aタイプ)
Toolholder for Milling (HSK-A type)
複合加工機 Turning Mill
HSK用刃物台HSK Toolpost
表 -1 キーとキー溝のスキマ比較Fig.1 Comparison of the gap of a key and key slot
表 -2 スキマの影響Fig.2 Effect of the gap
HSK-A63の公差
HSK-T63の公差
キー溝公差
キー公差
最小スキマ
12.2 12.3
0.150.10
最小スキマ 0.015
最大スキマ 0.33
最大スキマ 0.075
0.025
0.035
0.08
(単位:mm)
12.5812.5
12.4612.425
12.3512.25
12.4112.385
12.512.4 12.6
Key tolerance
Tolerance
Tolerance
Min. gap
Max. gap Key slot tolerance
Min. gap
Max. gap
スキマ
ドライブキー(機械刃物台側)
ドライブキー溝(ホルダ側)Drive key slot(Toolholder side)
Gap
Drive key(Toolpost side)
1
〔HSKツーリング〕 HSK Tooling
■ ホルダの種類 Toolholder Variation
●従来工具取付用ホルダ Conventional Type
角シャンク取付用For Square Shank ボーリングバー取付用For Boring Bar ドリル取付用For Drill
1)従来のNC旋盤でご使用の角シャンクホルダ・ボーリングバー・ドリルが取付くタイプ。2)シャンク拘束部の長さを考慮し、全長の長いボーリングバー用と短いドリル用を標準化。1)For square shank, boring bar, and drill at conventional NC lathe machining.
2)Long type for boring bar and short type for drill are available.
●一体型ホルダIntegral Type
勝手付Handed Type ニュートラル(全長2種類) Neutral Type
1)剛性重視のインターフェース一体型ホルダ。2)ニュートラル型は主軸ヘッドのB軸を振ることで(例えば45°)左右勝手付仕様の工具として使用可能。3)ニュートラル型は全長の異なる2種類のホルダを揃え、主軸ヘッド部の径サイズに合わせてホルダを選定し、ワークとの干渉のない加工が可能。
1)Integral type toolholder combining interface focusing on rigidity improvement.
2)Neutral type is available as double handed tool (right/left) by moving B-spindle of the spindle head.
3)Two different lengths available for Neutral type to prevent the spindle head interfere with workpiece by selecting the suitable tool length depending on the spindle diameter.
●ブランクホルダ Blank Type
1)特殊ホルダ製作用のブランクホルダも標準化。2)インターフェース部分はHSK-T規格にて加工済。1)Blank type for special order is available.
2)With interface based on HSK-T standard.
※回転用工具についてMilling Tool
回転用工具は、従来のHSK規格シャンクをお使い下さい。HSK-T規格と互換性があります。For milling tool, conventional HSK standard shank is attachable. It is compatible with HSK-T standard.
2
複合加工機用旋削工具 [ HSK-T規格 ] Tool for Turning Mill [HSK-T Standard]
型 番Description
(旧型番)Previous Description
在庫Stock
寸 法 (mm) Dimension
形状Shape
部 品 Spare Parts
クランプねじ Clamp Screw
レンチWrench
クーラントパイプ Coolant Pipe
φd1 φD L L1 L2 F1 F2
T63H- S2525R-105 A63-WH- S2525R-105 ●63 108 150 105 70 38 - 図1
Fig.1 HS12X25LW-6
CL63-1S2525L-105 S2525L-105 ●
T100H- S2525R-150- ● 100 118 190 150 110 55 63 図2
Fig.2 HS12X30 CL100-1S2525L-150 ●
・クーラントの吐出方向は調整可能です。Coolant outlet direction is adjustable.
・25角シャンク用です。 for 25mm square.
◎型番の見方(外径加工用) Indication of Description
チップ切刃長さ
DXHL
:::
65100140
12…(一体型ホルダ)
…(角シャンク取付用ホルダ)
L
D
LV
T
L
C
L
切刃の形状 ホルダ全長(ゲージラインからの長さ)R
L
N
右勝手
左勝手
勝手なし
DXRNLCP
S2525 R 105T63
A63(旧型番)
Previous Description
H
勝手
R
L
右勝手
左勝手
勝手
C
D
T
V
W
:80°菱形
:55°菱形
:三角形
:35°菱形
:80°六角形
チップの形状
H
無
あり
なし
マニュアルクランプ穴
T63:HSK-T63T100:HSK-T100
インターフェースサイズ
25角(高さ・幅)
シャンクサイズ
ゲージラインからの長さ
ホルダ全長
P
M
W
S
:レバーロック方式
:二重クランプ方式
:ウェッジロック方式
:スクリュークランプ方式
クランプ方式
N
B
:0°
:5°
チップ逃げ角
E G J
L N
V
M
60° 90° 93°
95° 95° 50°
72.5°
63°
(mm)
(mm)Interface Size
Manual Clump Hole
No
Yes
No Indication
Shank Size
Height/WidthToolholder Length
Length from Gauge Line
Hand
Right
Left
Clamp System
Lever Lock
Double Clamp
Wedge Lock
Screw Clamp
Insert Shape
Rhombic
Rhombic
Triangular
Rhombic
Trigon
Edge ShapeInsert Clearance
Hand
Right
Left
No Hand
Toolholder LengthLength from Gauge Line
Edge Length
Toolholder for Square Shank
Integral Toolholder
● クーラントパイプ Coolant Pipe
・クーラントパイプはホルダ内に組込み済です。 Coolant pipe is built into toolholder.
クーラントパイプCoolant Pipe
■ 角シャンク取付用ホルダ(外径・端面加工) Toolholder for Square Shank (For External / Facing)
●:標準在庫 Standard Stock
M12
クーラント吐出口
L2
L1
6
25
3231
32
L
F1
φD
図1
φd1
Coolant Outlet
Fig.1
・本図は右勝手(R)を示す Right hand shown
φd1
4843
F1
F2
35°
L2
L1
L3725 M12
φD
クーラント吐出口
図2
Coolant Outlet
Fig.2
●ホルダ寸法 Toolholder Dimension
3
角シャンク取付用ホルダ〔HSKツーリング〕 Toolholder for square shank HSK Tooling
●:標準在庫 Standard Stock
■角シャンク取付用ホルダ(外径・端面加工)Toolholder for square shank (For External / Facing)
型 番Description
取付けホルダシャンク寸法Attachment holderShank Dimension
在庫Stock
寸 法 (mm) Dimension
部 品 Spare Parts
クランプねじ Clamp Screw
レンチWrench
クーラントパイプ Coolant Pipe
φd1 φD H B T L L1 L2 F1
T63H- S2020R-105T (20角)(20mm square) ● 63 90 20 20 35 150 105 70 40 HS12X30LW-6
CL63-1T100H- S2525R-150T (25角)(25mm square) ● 100 118 25 25 48 190 150 110 55 HS12X35 CL100-1・クーラント吐出方向は調整可能です。Coolant outlet direction is adjustable.
φ
φ
●ホルダ寸法 Toolholder Dimension
型 番Description
(旧型番)Previous Description
在庫Stock
寸 法 (mm) Dimension
部 品 Spare Parts
クランプねじ Clamp Screw
レンチWrench
クーラントパイプ Coolant Pipe
φd1 φD L1 L2
T63H- S2525-90F - ● 63 108 90 81HS12X30 LW-6
CL63-1S2525-120F ● 120T100H- S2525-105F - ● 100 118 105 96 CL100-1S2525-150F ● 150・クーラント吐出方向は調整可能です。Coolant outlet direction is adjustable.・25角シャンク用です。for 25mm square shank
■ 角シャンク取付用ホルダ(端面・外径加工)Toolholder for square shank (For Facing / External )
φ
φ
●ホルダ寸法 Toolholder Dimension
4
複合加工機用旋削工具 [ HSK-T規格 ] Tool for Turning Mill [HSK-T Standard]
■ PCLN型(外径・端面加工)For External / Facing
6°
5°
L1
F1
5°
31
φ63
6°
・本図は右勝手(R)を示す Right hand shown
型 番Description
(旧型番)Previous Description
在庫Stock
寸法(mm)Dimension
部 品 Spare Parts
レバー Lever
ロックスクリュー Lock Screw
シート Shim
シムピン Shim Pin
ポンチ Punch
レンチ Wrench
クーラントパイプ Coolant Pipe
L1 F1
T63H- PCLNR-DX12 A63-WH- PCLNR-DX12 ●65 45 LL-2N
(LL-2)LS-2N(LS-2)
LC-42N(LC-42) LSP-2 PC-2 LW-3 CL63-1
PCLNL-DX12 PCLNL-DX12 ●
●ホルダ寸法 Toolholder Dimension
■ PCMN型(外径・端面加工)For External / Facing
φ63
50°
50°
L1
6°
6°
・本図は右勝手(R)を示す Right hand shown
型 番Description
(旧型番)Previous Description
在庫Stock
寸法(mm)Dimension
部 品 Spare Parts
レバー Lever
ロックスクリュー Lock Screw
シート Shim
シムピン Shim Pin
ポンチ Punch
レンチ Wrench
クーラントパイプ Coolant Pipe
L1
T63H- PCMNN-H12 A63-WH- PCMNN-H12 ● 100 LL-2N(LL-2)
LS-2N(LS-2)
LC-42N(LC-42) LSP-2 PC-2 LW-3 CL63-1
PCMNN-L12 PCMNN-L12 ● 140
●ホルダ寸法 Toolholder Dimension
■ PDJN型(外径・倣い加工)For External / Profiling
31
3°
7°
F1
φ63
L16°
・本図は右勝手(R)を示す Right hand shown
型 番Description
(旧型番)Previous Description
在庫Stock
寸法(mm)Dimension
部 品 Spare Parts
レバー Lever
ロックスクリュー Lock Screw
シート Shim
シムピン Shim Pin
ポンチ Punch
レンチ Wrench
クーラントパイプ Coolant Pipe
L1 F1
T63H- PDJNR-DX15 A63-WH- PDJNR-DX15 ●65 45 LL-3N
(LL-3)LS-2N(LS-2) LC-42 LSP-2 PC-2 LW-3 CL63-1
PDJNL-DX15 PDJNL-DX15 ●
●ホルダ寸法 Toolholder Dimension
●:標準在庫 Standard Stock
適合チップ型番Applicable Insert
CN○A1204..CN○G
CN○M
適合チップ型番Applicable Insert
CN○A1204..CN○G
CN○M
適合チップ型番Applicable Insert
DN○A1504..DN○G
DN○M
・新型番の部品(LL-2N、LS-2N、LC-42N)は旧型番ホルダにも使用出来ます。Newdescriptionsofspareparts(LL-2N,LS-2N,LC-42N)canbeusedforpreviousdescriptiontoolholders.
・新型番の部品(LL-2N、LS-2N、LC-42N)は旧型番ホルダにも使用出来ます。Newdescriptionsofspareparts(LL-2N,LS-2N,LC-42N)canbeusedforpreviousdescriptiontoolholders.
・新型番の部品(LL-3N、LS-2N)は旧型番ホルダにも使用出来ます。Newdescriptionsofspareparts(LL-3N,LS-2N)canbeusedforpreviousdescriptiontoolholders.
5
一体型ホルダ〔HSKツーリング〕 Integral Type HSK Tooling
■ PDNN型(外径・倣い加工)For External / Profiling
φ63
L1
62.5°
62.5°
6°6°
型 番Description
(旧型番)Previous Description
在庫Stock
寸法(mm)Dimension
部 品 Spare Parts
レバー Lever
ロックスクリュー Lock Screw
シート Shim
シムピン Shim Pin
ポンチ Punch
レンチ Wrench
クーラントパイプ Coolant Pipe
L1
T63H- PDNNN-H15 A63-WH- PDNNN-H15 ● 100 LL-3N(LL-3)
LS-2N(LS-2) LC-42 LSP-2 PC-2 LW-3 CL63-1
PDNNN-L15 PDNNN-L15 ● 140
●ホルダ寸法 Toolholder Dimension
■ PTGN型(外径加工) For External
31
6°
6°
F1
L1
φ63
91°
・本図は右勝手(R)を示す Right hand shown
型 番Description
(旧型番)Previous Description
在庫Stock
寸法(mm)Dimension
部 品 Spare Parts
レバー Lever
ロックスクリュー Lock Screw
シート Shim
シムピン Shim Pin
ポンチ Punch
レンチ Wrench
クーラントパイプ Coolant Pipe
L1 F1
T63H- PTGNR-DX16 A63-WH- PTGNR-DX16 ●65 45 LL-1N
(LL-1)LS-1N(LS-1)
LT-32N(LT-32) LSP-1 PC-1 FH-2.5 CL63-1
PTGNL-DX16 PTGNL-DX16 ●
●ホルダ寸法 Toolholder Dimension
■ WTEN型(外径加工)For External
8.5°
L1
φ63
60°
60°
型 番Description
(旧型番)Previous Description
在庫Stock
寸法(mm)Dimension
部 品 Spare Parts
クランプセット Clamp Set
シート Shim
シムピン Shim Pin
シムナット
Shim Nutレンチ Wrench
スペーサ Spacer
クーラントパイプ Coolant Pipe
L1
T63H- WTENN-H16 A63-WH- WTENN-H16 ● 100WCS-1N WTN-33 WP-1S WN-1 LW-3 WSP-1 CL63-1
WTENN-L16 WTENN-L16 ● 140
●ホルダ寸法 Toolholder Dimension
●:標準在庫 Standard Stock
適合チップ型番Applicable Insert
DN○A1504..DN○G
DN○M
適合チップ型番Applicable Insert
TN○A1604..TN○G
TN○M
適合チップ型番Applicable Insert
TN○A1604..TN○G
TN○M
・新型番の部品(LL-3N、LS-2N)は旧型番ホルダにも使用出来ます。Newdescriptionsofspareparts(LL-3N,LS-2N)canbeusedforpreviousdescriptiontoolholders.
・新型番の部品(LL-1N、LS-1N、LT-32N)は旧型番ホルダにも使用出来ます。Newdescriptionsofspareparts(LL-1N,LS-1N,LT-32N)canbeusedforpreviousdescriptiontoolholders.
6
複合加工機用旋削工具 [ HSK-T規格 ] Tool for Turning Mill [HSK-T Standard]
■ PWLN型(外径・端面加工)For External / Facing
5°
φ63
L1
F1
5°
6°
5°
31
・本図は右勝手(R)を示す Right hand shown
型 番Description
(旧型番)Previous Description
在庫Stock
寸法(mm)Dimension
部 品 Spare Parts
レバー Lever
ロックスクリュー Lock Screw
シート Shim
シムピン Shim Pin
ポンチ Punch
レンチ Wrench
クーラントパイプ Coolant Pipe
L1 F1
T63H- PWLNR-DX08 A63-WH- PWLNR-DX08 ●65 45 LL-2N
(LL-2)LS-2N(LS-2)
LW-42N(LW42) LSP-2 PC-2 LW-3 CL63-1
PWLNL-DX08 PWLNR-DX08 ●
●ホルダ寸法 Toolholder Dimension
■ WWMN型(外径・端面加工)For External / Facing
6°
6°
L1
φ63
50°
50°
型 番Description
(旧型番)Previous Description
在庫Stock
寸法(mm)Dimension
部 品 Spare Parts
クランプセット Clamp Set
シート Shim
シムピンShim Pin
シムナットShim Nut
レンチ Wrench
クーラントパイプ Coolant Pipe
L1
T63H- WWMNN-H08 A63-WH- WWMNN-H08 ● 100WCS-8 WWN-42 WP5X15 WN-1 LW-3 CL63-1
WWMNN-L08 WWMNN-L08 ● 140
●ホルダ寸法 Toolholder Dimension
●:標準在庫 Standard Stock
適合チップ型番Applicable Insert
WN○A0804..WN○G
WN○M
適合チップ型番Applicable Insert
WN○A0804..WN○G
WN○M
・新型番の部品(LL-2N、LS-2N、LW-42N)は旧型番ホルダにも使用出来ます。New descriptions of spare parts (LL-2N, LS-2N, LW-42N) can be used for previous description toolholders.
7
一体型ホルダ〔HSKツーリング〕 Integral Type HSK Tooling
■ SVLB型(外径・倣い加工)For External / Profiling
0°
0°
42
5°
L1
F1
φ63
・本図は右勝手(R)を示す Right hand shown
型 番Description
在庫Stock
寸法(mm)Dimension
部 品 Spare Parts
クランプスリュー Clamp Screw
レンチ Wrench
シート Shim
シムスクリュー Shim Screw
レンチ(シムスクリュー用)Wrench
シート止めネジShim Screw
レンチWrench
クーラントパイプ Coolant Pipe
L1 F1
A63-WH- SVLBR-DX1665 45 SB-40115TRN FT-15 SVN-32 - - SB-2050TR FT-6 CL63-1
SVLBL-DX16
T63H- SVLBR-DX16N ●65 45 SB-40125TRN FT-15 SVN-32N SS-4N LW-4 - - CL63-1
SVLBL-DX16N ●
●ホルダ寸法 Toolholder Dimension
■ SVVB型(外径・倣い加工)For External / Profiling
0°
0°
L1
B
B
φ63
型 番Description
在庫Stock
寸法(mm)Dimension
部 品 Spare Parts
クランプスリュー Clamp Screw
レンチ Wrench
シート Shim
シムスクリュー Shim Screw
レンチ(シムスクリュー用)Wrench
シート止めネジShim Screw
レンチWrench
クーラントパイプ Coolant Pipe
L1※B(°)
A63-WH- SVVBN-H16 100 66.5SB-40115TRN FT-15 SVN-32 - - SB-2050TR FT-6 CL63-1
SVVBN-L16 140 72.5
T63H- SVVBN-H16N ● 100 66.5SB-40125TRN FT-15 SVN-32N SS-4N LW-4 - - CL63-1
SVVBN-L16N ● 140 72.5
●ホルダ寸法 Toolholder Dimension
※角度Bは刃先とホルダを結んだ干渉角度を示します。 Angle B indicates interference angle made by edge point and toolholder.
・A63-WH-SVVBN-H16はT63H-SVVBN-H16Nに移行します。A63-WH-SVVBN-H16willbeswitchedtoT63H-SVVBN-H16N.・A63-WH-SVVBN-L16はT63H-SVVBN-L16Nに移行します。A63-WH-SVVBN-L16willbeswitchedtoT63H-SVVBN-L16N.
●:標準在庫 Standard Stock
適合チップ型番Applicable Insert
VB○T1604..VBGW
VCGT
適合チップ型番Applicable Insert
VB○T1604..VBGW
VCGT
・A63-WH-SVLB$-DX16はT63-SVLB$-DX16Nに移行します。A63-WH-SVLB$-DX16 will be switched to T63-SVLB$-DX16N.
Description
Change
型番移行
Description
Change
型番移行
8
HSKツーリング複合加工機用旋削工具 [ HSK-T規格 ] 一体型ホルダ Integral Type
■ KGBA型(外径溝入れ加工)For External Grooving
2°
6°
2°
φ63
L1
T
F1
・本図は右勝手(R)を示す Right hand shown
型 番Description
(旧型番)Previous Description
在庫Stock
寸法 (mm)Dimension
部 品 Spare Parts
適合チップApplicable
Insert
クランプセットClamp Set
レンチWrench
クーラントパイプCoolant Pipe
L1 F1 T
T63H- KGBAR-16 A63-WH- KGBAR-16 ● 65 45 2.5 LGBA-16RS
FT-15 CL63-1
GBA32R...
KGBAR-22-15 KGBAR-22-15 ●65 45
4.0
LGBA-22RS GBA43R...KGBAR-22-25 KGBAR-22-25 ● 4.5
KGBAR-22-35 KGBAR-22-35 ● 5.5
T63H- KGBAL-16 A63-WH- KGBAL-16 ● 65 45 2.5 LGBA-16LS
FT-15 CL63-1
GBA32L...
KGBAL-22-15 KGBAL-22-15 ●65 45
4.0
LGBA-22LS GBA43L...KGBAL-22-25 KGBAL-22-25 ● 4.5
KGBAL-22-35 KGBAL-22-35 ● 5.5
●ホルダ寸法 Toolholder Dimension
右勝手(R)ホルダには右勝手(R)チップ、左勝手(L)ホルダには左勝手(L)チップが適合します。 R-hand insert for R-hand toolholder,
L-hand insert for L-hand toolholder.
※適合チップの詳細は、総合カタログをご参照ください。For details of applicable insert, please refer general catalog. T寸法:ホルダ面から刃先までの距離を示します。T dimension shows the distance from toolholder to the cutting edge.
■ KTN型(ねじ切り加工)For Threading
31
F1
L1
φ63
1°
・本図は右勝手(R)を示す Right hand shown
右勝手(R)ホルダには右勝手(R)チップ、左勝手(L)ホルダには左勝手(L)チップが適合します。 R-hand insert for R-hand toolholder,
L-hand insert for L-hand toolholder.
型 番Description
(旧型番)Previous Description
在庫Stock
寸法(mm)Dimension
部 品 Spare Parts
適合チップApplicable Insert
クランプセット Clamp Set
レンチ Wrench
シート Shim
シート止めねじ Shim Screw
クーラントパイプ Coolant Pipe
L1 F1
T63H- KTNR-16 A63-WH- KTNR-16 ●65 45
CPS-5S FT-15TN-32
(TNW-32)※SP3X8 CL63-1 16ER...
KTNR-22 KTNR-22 ● CPS-6S LW-3 TN-43 SP3X8 CL63-1 22ER...
●ホルダ寸法 Toolholder Dimension
●:標準在庫 Standard Stock
※シート:2山ねじ切りチップ(例:16ER○○○ISO-M02)をご使用の際は、TNW-32を別途ご購入下さい。 Shim: Please purchase separately TNW-32 when using 2-thread type threading insert. (e.g. 16ER...ISO-M02)
※適合チップの詳細は、総合カタログをご参照ください。 For details of applicable insert, please refer general catalog.
9
ボーリングバー/ドリル取付用ホルダ〔HSKツーリング〕 Toolholder for Boring / Drill HSK Tooling
◎型番の見方(ボーリングバー・ドリル・ブランクツール用)Indication of Description (For Boring Bar / Drill / Blank Tool)
N 08 70T63 H
H
無ありなし
マニュアルクランプ穴
N
C
BL
ボーリングバー用
ドリル用
ブランクツール
ホルダ
08
10
φ8
φ10
内径サイズ
T63:HSK-T63T100:HSK-T100
インターフェースサイズ
ゲージラインからの長さ
ホルダ全長(mm)
…
Interface Size Manual Clump Hole
No IndicationNo
Yes
Toolholder
For Boring Bar
For Drill
For Blank Tool
Internal Dia. Toolholder Length
Length from Gauge Line
●クーラントパイプCoolant Pipe
・クーラントパイプはホルダ内に組込み済です。 Coolant pipe is already installed in the holder.
クーラントパイプCoolant Pipe
●:標準在庫 Standard Stock
■ ボーリングバー/ドリル取付用ホルダ Toolholder for Boring / Drill
φd1
L1
L2(取付け穴深さ)L2 (Hole depth of attachment)
φD
φd
M26(T63H型)29(T100H型)
L2 (45)
φd
(φ8)
φ8.
4
T63H-N08-70/T100H-N08-80はφ8.4の内部クーラント穴が開いていますので、ボーリングバー取付時にはボーリングバー突出し長さにご注意下さい。
L3 L4
As 8.4mm dia internal coolant hole is on T63H-N08-70/T100H-N08-80,Please be sure over hang length when you install boring bar.
型 番Description
(旧型番)Previous Description
在庫Stock
寸法(mm)Dimension
部 品 Spare Parts
備 考Others
クランプねじ Clamp Screw
レンチ Wrench
クーラントパイプ Coolant Pipe
φd φd1 φD L1 L2 L3 L4 M
T63H- N08-70 A63-WH- N08-70 ● 8
63
28 70 45 9 20M8
HS8X10LW-4
CL63-1ボーリングバー
取付用For Boring Bar
N10-80 N10-80 ● 10 35 80 55 9 22 HS8X12N12-90 N12-90 ● 12 42 90 65 9 22N16-100 N16-100 ● 16 48 100 75 11 30 M10 HS10X16 LW-5N20-120 N20-120 ● 20 52 120 95 13 40N25-140 N25-140 ● 25 56 140 115 13 50 M12 HS12X16 LW-6N32-160 N32-160 ● 32 56 160 135 13 60 HS12X12
T63H- C20-75 A63-WH- C20-75 ● 20
63
52 75 50 13 22 M10 HS10X16 LW-5
CL63-1※ドリル 取付用 For Drill
C25-85 C25-85 ● 25 56 85 58 15 28 M12 HS12X16 LW-6C32-90 C32-90 ● 32 56 90 62 15 30 HS12X12C40-100 C40-100 ● 40 68 100 72 18 35 M16 HS16X12 LW-8
T100H- N08-80
-
● 8
100
28 80 45 9 20M8
HS8X10LW-4
CL100-1ボーリングバー
取付用For Boring Bar
N10-90 ● 10 35 90 55 9 22 HS8X12N12-100 ● 12 42 100 65 9 22N16-110 ● 16 48 110 75 11 30 M10 HS10X16 LW-5N20-130 ● 20 52 130 95 13 40N25-150 ● 25 62 150 115 13 50 M12 HS12X18 LW-6N32-170 ● 32 72 170 135 13 60 HS12X20
T100H- C20-85
-
● 20
100
52 85 50 13 22 M10 HS10X16 LW-5
CL100-1※ドリル 取付用 For Drill
C25-90 ● 25 62 90 58 15 20 M16 HS16X18 LW-8C32-95 ● 32 72 95 62 15 20C40-105 ● 40 82 105 72 15 25 M16 HS16X20 LW-8
※ボーリングバー取付用ホルダより全長が短くなっています。Shorter than the toolholder for boring bar.
●ホルダ寸法 Toolholder Dimension
10
■ ブランクツール Blank Tool
埋め栓 M5 Plug
φ63
L1
φD
L2
埋め栓 M5
L2
φ63
L1
φD
Plug
図 -1 Fig.1 図 -2 Fig.2
型 番Description
(旧型番)Previous Description
在庫Stock
寸法(mm)Dimension
形状Shape
部 品 Spare Parts
クーラントパイプ Coolant Pipe
φD L1 ※ L2
T63H- BL62-102 A63-WH- BL62-102 ●62
102
26
図-1Fig.1
CL63-1BL62-142 BL62-142 ● 142
BL100-67 BL100-67 ● 100 67 図-2Fig.2
●ホルダ寸法 Toolholder Dimension
※L2はゲージラインから埋め栓までの長さを示します。 L2 indicates the length from gauge line to plug.
●ブランクツールは特殊ホルダ製作用です。Blank tool is for special order.
①インターフェース部分は、HSK-T規格にて仕上がっています。 ②先端部も焼入処理してあります。インターフェース部分変形防止の為、再熱処理は行わないで下さい。 1.Interface part is based on HSK-T standard. 2.Whole tool is heat-treated. Do not re-heat again to avoid deformation of interface.
材質:SNCM439 Material
硬度:40〜45HRCHardness
▲! 注意工具のサイズによっては、機械のATCマガジン内の隣接ポットを空にする必要があります。(大径工具登録設定)詳細は、機械メーカの取扱い説明書をご参照下さい。
▲!CAUTION It may be necessary to empty the adjacent pot inside the ATC magazine of the machine depending on the tool size. (Large tool registration setup)For details, please refer to the instruction of Machine builder.
●:標準在庫 Standard Stock
複合加工機用旋削工具 [ HSK-T規格 ] ブランクツール〔HSKツーリング〕 Blank Type HSK Tooling
CP263-1 CAT/0T1012TYH
切削工具に関する技術的なご相談は●受付時間 9:00~12:00・13:00~17:00●土曜・日曜・祝日・会社休日は受付しておりません
京セラ カスタマーサポートセンター(携帯・PHSからもご利用できます)
機 械 工 具 事 業 本 部〒612-8501京都市伏見区竹田鳥羽殿町6番地TEL:075-604-3651FAX:075-604-3472http://www.kyocera.co.jp/prdct/tool/index.html