How to use Wireless LAN(Windows 7)Eng]Wireless...How to use Wireless LAN(Windows 7) I. Network...
Transcript of How to use Wireless LAN(Windows 7)Eng]Wireless...How to use Wireless LAN(Windows 7) I. Network...
How to use Wireless LAN(Windows 7)
I. Network Settings 1~11
II. Daily Use 12,13
III. Delete Network Setting 14~16
Ⅰ. Network Settings
INDEX
1
Alumni (graduates) will not be able to connect to the intra-university networks.
1
(1) Click Start and open Control Panel.
(2) Click “View network status and tasks”.
2 (1) Click “Manage wireless
networks”.
View by:Category
Ⅰ. Network Settings
3
(1)Click Add. (2) Select “Manually create a
network profile”.
4
(1) Input the following information. (2) Click Next. (3) Select “Change connection settings”.
Network name:
waseda-wpa2 Security type:
WPA2-Enterprise
Encryption type:
AES Check these two.
2
Ⅰ. Network Settings
6 (1) Click Security tab. (2) Confirm a network authentication
method. (3) Click Settings.
7
Choose a network authentication method:
Microsoft Protected EAP(PEAP) Uncheck this box
Uncheck all.
Check here. (Uncheck “Connect to these servers”.)
Uncheck all.
Uncheck here.
(1) Configure according to the right window. Don’t forget configuration of EAP MSCHAPv2.
(2) Click OK and return to “waseda-wpa2 Wireless network properties”.
5 Check “Connect automatically when this network is in range” and “Connect even if the network is not broadcasting its name (SSID). Don’t check “Connect to a more preferred network if available”.
3
Ⅰ. Network Settings
9 (1) Click a network icon in task tray. (2) Select waseda-wpa2 and connect.
8
(1) Click Advanced settings. (2) Configure according to the right in
“802.1x settings” tab. (3) Click OK in Advanced settings. (4) Click OK in “waseda-wpa2 Wireless
network properties”. (5) Close “Manually connect to a wireless
network”.
If you cannot find the icon, the icon is stored in △. (Click △.) Or, check your wireless switch is on.
Check here.
User authentication
4
Ⅰ. Network Settings
10
(1) Enter your Waseda-net mail address ID and password.
(2) Click OK. If you fail, try again.
11
Notice First time Windows Security Alert appears. Click connect.
When a connection established, the blue icon turns into white.
Ⅱ. Daily Use
12
(1) Go to the place where access point is set. You can check the location on IT service NAVI site. http://www.waseda.jp/navi/e/network/wireless_new.html
13 (1) Turn the wireless switch on. (2) Connect to network. Follow 9~11 of this manual.
User name:
Waseda ID or Waseda mail address Password:
Password of MyWaseda
5
6
Ⅲ. Delete Network Setting
14
Describes how to delete the wireless LAN network settings from your PC.
(1) Click “Manage wireless networks”.
(1) Click Start and open Control Panel.
(2) Click “View network status and tasks”.
15
16
(1) Right click "waseda-wpa2“ on the list.
(2) Click "Delete Network”.
“Waseda-wpa2" will be removed from the list.
How to use Wireless LAN (Windows 7)
IT Service, Waseda University April 1 2017 Ver. 5
View by:Category