How to store the printed sublimation paper after printing

6
How To Store The Printed Sublimation Paper After Printing?

Transcript of How to store the printed sublimation paper after printing

Page 1: How to store the printed sublimation paper after printing

How To Store The Printed Sublimation Paper After Printing?

Page 2: How to store the printed sublimation paper after printing

Without a doubt, dye sublimation printing is one of the most effective methods for creating a range of customised and personalised products on-demand. The Key steps of Dye Sublimation are:Special inks (dye sublimation inks) are printed onto a digital transfer paper, usually as a mirror image.The heat press (suitable for loose pieces) or a calendar (suitable for continuous media on rolls) and a receiver substrate needs to be heated to apply the image to the substrate.

Page 3: How to store the printed sublimation paper after printing

The receiver substrate will be a polyester fabric or a material which has been pre-coated with a polyester surface, including glass, metal, wood, plastics and ceramics. The sublimation transfer paper is placed on top of the item to be imaged, with the printed side down. Pressure and heat is then applied using the heat press or calendar (typically 180-200°C for 35-60 seconds).The print is complete when the paper is removed. No drying time, or post treatment is required.

Page 4: How to store the printed sublimation paper after printing

Today, we talk about how to store the printed transfer paper?A) print a good transfer paper, try to do volume storage.B) print a good transfer paper, you can put a loose plastic bag roll up after the vertical, plastic bags open to facilitate the transfer of water in the paper to the air volatile.

Page 5: How to store the printed sublimation paper after printing

C) The printed paper is preferably stored in a low humidity environment (humidity ≤55% RH; temperature 15-30 °C which facilitates the evaporation of moisture in the transfer paper.D) print a good transfer paper, the general requirements in an hour after the transfer, try to store 5 hours later after the transfer, until it can be transferred to dry after drying, if there is no dry to transfer, Moisture at high temperatures will become a steam interference transfer effect, making the aerosol, color and so on. To ensure that each batch of pattern drying degree close to the same color. (Transferring immediately after printing will result in a decrease in transfer rate.)

Page 6: How to store the printed sublimation paper after printing

Thank you Company: Nanjing Fei Yue Paper Industrial Co.,LimitedAdd: Li Ao Building,No.323 Central Road,Nanjing,Jiangsu,ChinaTel: 86-25-85288894Fax: 86-25-85288894Website: www.feiyuepaper.com