How to Spray Paint Vinyl Shutters | Krylon® · VINYL SHUTTERS Revitalize old shutters and add curb...
Transcript of How to Spray Paint Vinyl Shutters | Krylon® · VINYL SHUTTERS Revitalize old shutters and add curb...
VINYL SHUTTERS
Revitalize old shutters and add curb appeal to your home.
INSTRUCTIONS
Remove old shutters from window and lay flat on your drop cloth.
Using an all-purpose cleaner/degreaser, wipe down shutters to remove all dirt and grime. (If the plastic is new, wipe down with paint thinner for best results.) Rinse thoroughly with water and allow to dry.
Using painter’s tape, completely tape off any area that you do not want painted.
Applying in a well-ventilated area, hold can 6-8 inches from the shutter surface and paint the sides and ends of the shutter using a sweeping side-to-side motion with slight overlap.
SKILL LEVEL
PROJECT TIME
½ hour per shutter
MATERIALS
Krylon® Dual® Superbond® Paint + Primer Gloss White
All-purpose cleaner/degreaser
Ladder
Drop cloth
Screwdriver or drill
Painter’s tape
1
2
3
4
1 2 3 4 5
page 1 of 2
(continued on next page)
VINYL SHUTTERS
Revitalize old shutters and add curb appeal to your home.
INSTRUCTIONS (continued)
Allow paint to dry for 30-60 seconds.
Continue to apply light, multiple coats, waiting 30-60 seconds between each, until you are satisfied with the appearance.
Krylon Dual Superbond dries in 25 minutes or less, and can be handled in about one hour.
Allow the shutters to dry overnight before reinstalling.
SKILL LEVEL
PROJECT TIME
½ hour per shutter
5
6
7
8
1 2 3 4 5
page 2 of 2