How to sim unlock Samsung Galaxy S6 T-Mobile USA (SM-G920T)
Click here to load reader
-
Upload
simlockremoteserver -
Category
Mobile
-
view
1.535 -
download
2
Transcript of How to sim unlock Samsung Galaxy S6 T-Mobile USA (SM-G920T)
![Page 1: How to sim unlock Samsung Galaxy S6 T-Mobile USA (SM-G920T)](https://reader038.fdocuments.net/reader038/viewer/2022100421/55b78882bb61eb3e268b471a/html5/thumbnails/1.jpg)
How to Sim Unlock Samsung Galaxy S6 T-Mobile USA
Model: SM-G920T
Provided to you by: http://www.UnlockSamsungOnline.com
![Page 2: How to sim unlock Samsung Galaxy S6 T-Mobile USA (SM-G920T)](https://reader038.fdocuments.net/reader038/viewer/2022100421/55b78882bb61eb3e268b471a/html5/thumbnails/2.jpg)
WARNING: This guide is ONLY for the SM-G920T, NOT for the SM-G925T or other new T-
mobile USA models. The concept would work for other models but you need a non T-Mobile
firmware for your specific model (full original stock firmware).
Non USA S6 phones or S6 models not locked on T-mobile can be unlocked normally at the time
of writing (30 May 2015)
Disclaimer: UnlockSamsungOnline.com is not responsible if users break / brick or damage their
phone while trying to use this method. Follow this guide at your OWN risk. This guide is meant for
advanced users only!
Preparation:
1. Download the Special MetroPCS Firmware for Samsung SM-G920T and unpack it to a
new folder:
http://downloads.unlocksamsungonline.com/files/samsung-galaxy-6-sm-g920t-metropcs-
firmware.zip
2. Download ODIN v3.10 and unpack it to a new folder on your computer
http://downloads.unlocksamsungonline.com/files/Odin_3.10.0.zip
3. Make sure your phone battery is fully charged (min least 80%)
4. Enable USB Debugging
On the phone go to: Settings > Developers Option > USB Debugging
If Developers Option menu item is hidden, go to Settings > About Phone > Built Number and
tap on ‘build number’ for 8 times. You will get a notification that developer option is enabled
after.
5. Install the Samsung Galaxy S6 USB drivers on your PC, if you haven’t already:
http://downloads.unlocksamsungonline.com/files/samsung-galaxy-6-official-windows-
drivers.zip
![Page 3: How to sim unlock Samsung Galaxy S6 T-Mobile USA (SM-G920T)](https://reader038.fdocuments.net/reader038/viewer/2022100421/55b78882bb61eb3e268b471a/html5/thumbnails/3.jpg)
Firmware flashing:
1. Run Odin3 v3.10.0 as administrator (Right-Click: Run as Administrator)
2. Switch OFF your SM-G920T and give it up to 30 seconds to fully shut down
3. Boot in download mode
You do this by pressing the Volume Down + Home + Power Key simultaneously.
4. When you see the screen below:
Samsung Galaxy S6 in Download Mode
![Page 4: How to sim unlock Samsung Galaxy S6 T-Mobile USA (SM-G920T)](https://reader038.fdocuments.net/reader038/viewer/2022100421/55b78882bb61eb3e268b471a/html5/thumbnails/4.jpg)
5. Click the ‘Volume Up’ button to enter Download Mode
6. Connect the Samsung Galaxy S6 to your PC with the original USB cable that comes with
the phone. Odin will now automatically detect your phone and show the
“Added!” message:
7. In Odin, click on AP or PDA button and then choose the firmware file you downloaded
and unpacked in the preparations. You should have this file:
G920T1UVU1AOCH_G920T1TMB1AOCH_TMB_HOME.tar.md5
After selecting the file you will see the field next to the button will have the path to this file
8. Ensure Auto Reboot and F. Reset Time options are selected in Odin and the Re-
Partition option is unchecked (this is very important!).
![Page 5: How to sim unlock Samsung Galaxy S6 T-Mobile USA (SM-G920T)](https://reader038.fdocuments.net/reader038/viewer/2022100421/55b78882bb61eb3e268b471a/html5/thumbnails/5.jpg)
9. Click Start and wait for the software to update your phone.
10. Once the installation is done, your phone will automatically reboot and you will see
‘PASS!’ in the left top box in green.
In case your phone does NOT automatically reboot, please disconnect the cable and
manually reboot it by pressing and holding the power button
![Page 6: How to sim unlock Samsung Galaxy S6 T-Mobile USA (SM-G920T)](https://reader038.fdocuments.net/reader038/viewer/2022100421/55b78882bb61eb3e268b471a/html5/thumbnails/6.jpg)
11. You can now close the Odin software when the phone turns back on.
12. Your Samsung Galaxy S6 is now fully updated with MetroPCS Firmware
13. Now when you start the Galaxy S6 with a non T-Mobile simcard it will ask you for the Sim
network unlock PIN.
You can now order the unlock code via https://www.unlocksamsungonline.com
(we have a special service for these phones for cheap! Please contact support here and
ask about it; https://www.unlocksamsungonline.com/support/index.php?a=add )
Troubleshooting : I am stuck on the SAMSUNG BOOT LOGO! What do I do?
First, do not worry, your phone is not broken. Simply follow the instructions below:
a. Wait at least 5 minutes to make sure you are stuck on the logo screen
b. Pull the battery out and wait 30 seconds, then put the battery back in
c. Turn the phone on by: HOLDING VOLUME UP + HOME + POWER you will soon see the
RECOVERY page
Tip: when the phone turns on let go of the power button ONLY, when you see the recovery let go
of everything
![Page 7: How to sim unlock Samsung Galaxy S6 T-Mobile USA (SM-G920T)](https://reader038.fdocuments.net/reader038/viewer/2022100421/55b78882bb61eb3e268b471a/html5/thumbnails/7.jpg)
d. Scroll down to WIPE factory user data reset and select it when prompted scroll to YES and
select it to do a factory wiping
e. Scroll down to WIPE CACHE PARTITION and select it, when prompted scroll to YES and
select it to do a wipe on cache
Tip: Use the volume rockers to navigate and the power button to select your option
f. Reboot the phone, you should load properly now