1

How to Set Remote Live View in CamGraba

1. Use PC1, and turn on the CamGraba

2. Click setting and choose Network Service

3. Choose Live Streaming and set the port for your streaming

4. Press Start and OK

(Notice: In this case, you need to forward port 5150 and port 81)

2

Use IE to Remote Live View

5. Use PC2, and turn on IE.

6. Setting the security of IE with following steps:

Click the Tools menu, and then click Internet Options.

On the Security tab, click the Custom level button.

Scroll down to Download unsigned ActiveX controls and click Enable or Prompt.

7. Fill in the address with IP of PC1:port

In this case, fill in with 10.0.0.58:81

And will show the scene below, click Remote Live Viewer

8. Install ActivateX with the instruction in IE

9. Press your username/ password of Camgraba

10. You can choose the channel that you want to see with double click.

3

Use CamGraba to Remote Live View

1. Use PC2, and turn on Remote Live Viewer

2. Go to the setting page of Remote Live View

3. Setting for server

Fill in the IP address, port, user name and the password of PC1’s CamGraba

Test the server. If the test is successful, it will show the message like below.

After the test is successful, add it to the list and press ok to save the settings.

4

4. The main page will show the server you had added

Press login button to login to the server

5. After login, it will show all the cameras you set in the server

6. With double click of the camera, it will show on your screen