HOW TO REKEY A SCHLAGE LOCK WITHOUT THE ORIGINAL KEY - DVS Locksmith
-
Upload
dvslocksmith -
Category
Business
-
view
4 -
download
0
description
Transcript of HOW TO REKEY A SCHLAGE LOCK WITHOUT THE ORIGINAL KEY - DVS Locksmith
1/4
How to Rekey a Schlage Lock without the Original Keydvslocksmith.com/2021/07/14/how-to-rekey-a-schlage-lock-without-the-original-key
It is a difficult task to rekey a schlage lock without the original key. But it is something
that a Lockout service in Forest Park can do. Yet, it may be costly because they will need
to make a house call without a key. New Schlage locks include a reset key. It allows you to
rekey the lock without using any of the existing keys. Confirm that you don’t have this
blue “Secure Key” technology before you try anything else. If you discover the resetting
key from the Schlage Rekey lock service in Forest Park, buy a new set. The set includes a
new reset key. Then follow the instructions for that Schlage model.
In this article, we’ll look at how to rekey a Schlage lock without the original key. We’ll also
check to rekey vs. purchasing a new lock for various locking methods.
Rekeying Kit
Rekeying products are available for most Lockout services in Forest Park. Unfortunately,
most of them are irreplaceable. So, you need to get a locking kit in your home for every
brand. Each kit has six locks to rekey. If you need to do more, you can get more pins. The
kit works on locks of the entry and deadbolt. It has two keys and all appliances other than
a screwdriver. But keep your keys up to date. To remove the cylinder, you will need them.
2/4
Rekeying a lock
A lock cylinder is more than one way out. For example, a Rekey lock service in Forest Park
may choose to open the lock or shake the lock to release it. First, the locksmith must bring
the lock to its “unlock” position. Next, it is to reclaim the lock cylinder. Finally, it is so that
the locksmith can remove the cylinder.
Kwikset Smart Key
If you have access from the door without damaging the lock, you can take the cylinder.
Then use a clever Kwikset key reboot to enter your new key into the locks. Kwikset
intelligent keys are available at Rekey lock service in Forest Park.
Rekeying a Schlage lock:
The situation can be a bit difficult when it comes to Schlage lever locks. The Lockout
service in Forest Park locksmith would select this lock. Then unscrew the lever and pull
the cylinder to restore it. Schlage but, be challenging to decide. Thus, it is sometimes
easier to either change the lock or drill the cylinder and change it with a new cylinder. The
cost of the substitute cylinder is around $10.
Costs of rekeying a lock
As the key pins in the locks are cheap, rekeying is always cheaper than changing your
locks. It is because when you rekey your locks, you will only get paid for your labor. But, if
you change your locks, you pay both for labor and parts. Lockout service in Forest Park
and Rekey lock service in Forest Park offers to rekey a lock at low prices.
When to rekey a lock
If you lose your set of keys, it will harm your doors because anyone with the keys can get
entrance. If you need to solve the problem, rekeying is your best alternative. As a result,
no one will be able to get entrance to your property using the old keys. It takes more time
to change locks and is unnecessary. But, this is dependent on the sort of door lock and
handle you have installed on your door.
Rekeying a lock can also help to increase a building’s security. For example, contractors
may have duplicate keys after the construction of a home. As a result, when some buy a
house, they should ensure that they have possession of the keys. It’s also common to
change door locks when the new resident comes in for landlords and property
management.
3/4
Tips on how to Rekey a Schlage lock without the original key
Remove the knob of the door
Insert the wire tool in the buttonhole and push the button clip. Next, remove the
knob from the door. The kit includes the buttonhole.
Remove the cylinder. To remove the knob sleeve, push the cylinder out the back of
the knob assembly. Take out the cylinder.
Pull out the Retainer Ring
Use the specific retainer ring tool to remove the thin retainer ring. The kit includes
the retainer ring. To remove the retention ring from the cylinder, press the retainer
ring tool against it. Set aside the ring for later replacement.
Remove the cylinder plug.
Removing the cylinder plug from the cylinder is an essential step. The pins and
springs on the cylinder’s top keep pressure on the keyed pins. Pull out the old key
and rotate it to the left or right. Next, push the plug follower through the cylinder to
remove the plug. Keep the pressure between the plug follower. It prevents the pins
and springs from popping out.
Keep the plug close to the cylinder plug until removed so that the pins and springs
do no longer pop out of the cylinder. According to Lockout service in Forest Park,
it’s not the end of the world if the pins and springs fall out. First, make sure you
collect them all. Then, for reinserting them, follow the instructions on the attached
instruction page.
Reassemble the lock by inserting the Pins.
Remove the old pins, insert the new key. Place the new colored pins using tweezers
or small pins on the color code of the instruction sheet. Reassemble the lock after
installing the new pins.
Rekeying vs. Buying new locks
4/4
Suppose you have a custom lock fitted (such as those used on French doors) or a designer
lock. First, of course, you must rekey the lock. But if you have lost the keys to a generic
lock or two. You should go to the Rekey lock service in Forest and get a new set of locks.
Lockout service in Forest Park locksmith will be able to rekey a lock without the original
key. But please consider your options. Your budget, as well as the locking mechanisms,
locks, and handles you have, will all play a role. Choose the best solution for your scenario
by weighing the benefits of rekeying against purchasing a new lock.