I do not accept any liability for any damage that may occur to the iPhone or case as a result of using this case and/or these instructions.

1. Insert iPhone top into the middle/most flexible

part of the case.

2. Rotate the iPhone into the case like shown.

3. Push the top of the iPhone into the top of the case.

4. View the iPhone and case from the bottom and

pinch the iPhone and case together until you hear

a click, one side at a time is sometimes easier.

5. Done.

How to fit the iPhone into the ‘Clockwork iPhone 4 / 4S Case’: http://shpws.me/4E46

I do not accept any liability for any damage that may occur to the iPhone or case as a result of using this case and/or these instructions.

1. Using your fingers, flex the corners of the base of

the iPhone case until a small click is heard at one

corner.

2. Method 1:

Keep on flexing the iPhone case until one corner of

the iPhone is completely released; it is easier if you

have nails, if you cannot do this try Method 2.

Method 2:

Use this method if you really can’t release it using

the first method.

Use a small non-metallic item such as a cocktail

stick and wedge this in-between the lip of the

iPhone and the case and then flex the case over

this corner which should make it easier to release.

3. Grab hold of the released corner of the iPhone and

release the other corner by flexing the case on the

other side or just pull the iPhone outwards.

How to remove the iPhone from the ‘Clockwork iPhone 4 / 4S Case’: http://shpws.me/4E46

I do not accept any liability for any damage that may occur to the iPhone or case as a result of using this case and/or these instructions.

4. Slide the iPhone out of the case.

5. Done.

How to remove the iPhone from the ‘Clockwork iPhone 4 / 4S Case’: http://shpws.me/4E46