How To Find Your Colour - Oneforce Distribut · PDF fileHow To Find Your Colour Dupli-Color...

Click here to load reader

  • date post

    09-Jul-2018
  • Category

    Documents

  • view

    430
  • download

    51

Embed Size (px)

Transcript of How To Find Your Colour - Oneforce Distribut · PDF fileHow To Find Your Colour Dupli-Color...

  • How To Find Your Colour

    Dupli-Color automotive paints are acrylic based lacquers available in factory matched colours and general purpose items. This booklet contains the full list of car manufacturers colours covered by the range.

    To find the matching Dupli-Color automotive paint for your car:

    1. Look up the manufacturer of your car 2. Check the colour with year and manufacturers own code number 3. Note the Dupli-Color colour part number 4. Note the recommended Dupli-Color primer part number 5. The cap colour of each Dupli-Color automotive paint shows the approximate colour of the contents.

    ALL PAINTS SHOULD BE TESTED IN AN INCONSPICUOUS AREA AS SHADES MAY VARY.

    USE YOUR CAR MANUFACTURER PAINT CODE AS THE REFERENCE TO SELECT YOUR PAINT COLOUR.

    Cannot find your paint in the Catalogue?

    Our Spraymatch System has over 15,000 colours available. Spraymatch provides you with factory formula colours that deliver top of the line performance every time, even for advanced new colours. The result is a durable factory match finish from an economical alternative. To find your nearest stockist of Spraymatch call: 02 4577 6977. Your local stockist will custom mix your colour and custom fill any number of aerosols you need for your professional quality finish. Designed for the ultimate touch up for minor scratches to large jobs. Remember to apply Clear Coat over your repair if your car manufacturer specifies it.

    IMPORTANT FOLLOW CAN DIRECTIONS CAREFULLY. ALWAYS SPRAY INCONSPICUOUS TEST AREA BEFORE COMMENCING JOB. BEST APPLIED IN TEMPERATURES BETWEEN 15C AND 30C. DO NOT USE DURING HIGH HUMIDITY. HINTS ON SPRAYING TECHNIQUES AND PROCEDURES ARE LISTED ON PAGE 2 OF THIS BOOKLET.

  • How to use Touch-Up Paints

    1. Paint in good weather only, 15-30C and relative humidity less than 60%.

    2. Surface to be sprayed must be absolutely clean and dry. Thoroughly remove all dirt, rust, oil, grease and silicone/polish/wash residue. Use degreasing solvent. Sand previously painted surfaces.

    3. Mask surrounding areas to protect from overspray.

    4. Bare Metal Surfaces and Aluminium: Spray with Etch Primer (fast drying and easy sanding) to re-establish original surface level.

    Rust Areas: Use Auto Zinc as an anti-rust primer that controls rust and seals the surface to protect against corrosion. (Colour coat should be applied within two hours or left for 48 hours.)

    Plastic Surfaces: Use Plastic Trim Primer prior to spraying a colour coat. Promotes adhesion to bumper bars and plastic body mouldings.

    5. Shake can vigorously for two full minutes and after sound of agitator is heard (repeat at intervals during use to ensure paint remains thoroughly mixed).

    6. Trial spraying on a similar surface to check colour match and spraying technique is suggested.

    7. Hold can approximately 20-25cm from prepared surface and spray from side to side with light even strokes. DO NOT attempt to get complete coverage in one pass. Several light coats will prevent paint sag and runs. Allow 20 minutes between each coat. Each coat should be dry before re-coating.

    Metallic Paints: Overspray with 2-3 coats of Top Coat Clear to improve protection.

    8. Allow 5-7 days for paint to harden, wash and polish the painted area.

    9. After use, turn can upside down and spray until valve clears of paint. If spray-nozzle is clogged with excess paint, remove nozzle and soak in thinners for one minute.

  • Top Coat Clear or COB (Clear Over Base)

    Top Coat Clear or COB is the top coat of a two part system consisting of a metallic base colour and clear top coat.

    The system gives improved protection against UV radiation and airborne pollutants.

    It applies to most metallics, all pearlescent, mica paints and fluorescent colours. The metallic, pearlescent and mica colours to which Top Coat Clear is applicable in the Dupli-Color range are marked in the book with a tick ().

    The caps on the can are also marked COB.

    Directions for using Top Coat ClearBASE COLOUR Spray as per directions on the can. Note that appropriate primer should be used.

    DS117/PS117 TOP COAT CLEAR HCT108-C CLEAR 1. Allow base colour to dry (20-30 minutes) 2. To achieve desired results several coats of Top Coat Clear will be required3. Apply a light coat of Top Coat Clear and allow to dry for 20-30 minutes4. Then apply additional full coats as required allowing each coat to dry for 20-30 minutes5. Allow 7 days before waxing.

    For hints on how to spray paint, fix nicks and scratchesand finding the right paint match, call

    02 4577 6977 for a leaflet

  • Colour Car Manufacturers Code

    Year Colour-touch

    Autospray 150g

    Autospray 350g

    Primer

    PRIMERSScratch Filler & Primer DS116

    White Primer DS107 PS107

    Grey Primer HCT107-C DS106 PS106

    Auto Zinc DS113 PS113

    Red Primer DS108 PS108

    Plastic Trim Primer HCT109-C DS115

    Filler Primer 312g FP101

    Etch Primer DS125 PS125

    Plastic Primer DS115 PS115

    Spray Putty DS0010 PS010

    General Purpose Product Product Code Volume Packaged

    High Heat Black DH1602 340gm Aerosol

    High Heat White DH1604 340gm Aerosol

    High Heat Aluminium DH1606 340gm Aerosol

    High Heat Clear DH1616 340gm Aerosol

    High Heat Cast Iron DH1618 340gm Aerosol

    High Heat Red DH1608 340gm Aerosol

    High Heat Orange DH1610 340gm Aerosol

    High Heat Blue DH1612 340gm Aerosol

    Engine Enamel Ford Blue DE1601 340gm Aerosol

    Engine Enamel Universal White DE1602 340gm Aerosol

    Engine Enamel Universal Gold DE1604 340gm Aerosol

    Engine Enamel Ford Red DE1605 340gm Aerosol

    Engine Enamel Ford Dark Blue DE1606 340gm Aerosol

    Engine Enamel Chevrolet Orange-Red DE1607 340gm Aerosol

    Engine Enamel General Motors Blue DE1608 340gm Aerosol

    Engine Enamel Chevrolet Blue DE1609 340gm Aerosol

    Engine Enamel Pontiac Blue DE1610 340gm Aerosol

    Engine Enamel New Ford Grey DE1611 340gm Aerosol

    Engine Enamel Grey Engine Primer DE1612 340gm Aerosol

    Engine Enamel Gloss Black DE1613 340gm Aerosol

    Engine Enamel Aluminium DE1615 340gm Aerosol

    Engine Enamel Ford Green DE1617 340gm Aerosol

    Engine Enamel Chevy Orange DE1620 340gm Aerosol

    Engine Enamel Old Ford Blue DE1621 340gm Aerosol

    Engine Enamel Chrylser Orange DE1622 340gm Aerosol

    Engine Enamel Chrysler Corp. Blue DE1631 340gm Aerosol

    Engine Enamel Chrysler Industrial Red DE1632 340gm Aerosol

    GENERAL PURPOSE PRODUCTS CONTINUED ON NEXT PAGE

  • General Purpose Product Product Code Volume Packaged

    Engine Enamel GM/Chrysler Low Gloss Black DE1634 340gm Aerosol

    Engine Enamel Ford Semi-Gloss Black DE1635 340gm Aerosol

    Engine Enamel Clear DE1636 340gm Aerosol

    Engine Enamel Cummins Beige DE1638 340gm Aerosol

    Engine Enamel Plum Purple DE1640 340gm Aerosol

    Engine Enamel Grabber Green (Lime) DE1641 340gm Aerosol

    Engine Enamel Daytona Yellow DE1642 340gm Aerosol

    Engine Enamel Torque N Teal DE1643 340gm Aerosol

    Engine Enamel Racing Green (Hunter) DE1644 340gm Aerosol

    Engine Enamel Cast Coat Aluminium DE1650 340gm Aerosol

    Engine Enamel Cast Coat Iron DE1651 340gm Aerosol

    Engine Enamel Chrysler Hemi Orange DE1652 340gm Aerosol

    Engine Enamel Red DE1653 340gm Aerosol

    Brake Caliper Kit Red Paint BCP100 340gm Aerosol

    Brake Caliper Yellow Paint BCP101 340gm Aerosol

    Brake Caliper Black Paint BCP102 340gm Aerosol

    Brake Caliper Silver Paint BCP103 340gm Aerosol

    Brake Caliper Blue Paint BCP104 340gm Aerosol

    Brake Caliper Red Kit BCP400 340gm Aerosol

    Brake Caliper Yellow Kit BCP401 340gm Aerosol

    Brake Caliper Racing Black Satin Kit BCP402 340gm Aerosol

    Brake Caliper Silver Kit BCP403 340gm Aerosol

    Brake Caliper Blue Kit BCP404 340gm Aerosol

    High Performance Wheel Silver WP101 340gm Aerosol

    High Performance Wheel Graphite WP102 340gm Aerosol

    High Performance Clear Wheel Coating WP103 340gm Aerosol

    High Performance Satin Black Wheel Coating WP104 340gm Aerosol

    High Performance Bronze Wheel Coating WP105 340gm Aerosol

    Hot Tires White HT100 0.5 oz Tube

    Hot Tires Red HT200 0.5 oz Tube

    Hot Tires Yellow HT300 0.5 oz Tube

    Shadow Chrome Black-Out Kit SHD100 Kit

    Vinyl and Fabric Coating Red HVP100 311gm Aerosol

    Vinyl and Fabric Coating Yellow HVP101 311gm Aerosol

    Vinyl and Fabric Coating Blue HVP102 311gm Aerosol

    Vinyl and Fabric Coating Silver HVP103 311gm Aerosol

    Vinyl and Fabric Coating Gloss Black HVP104 311gm Aerosol

    Vinyl and Fabric Coating White HVP105 311gm Aerosol

    Vinyl and Fabric Coating Flat Black HVP106 311gm Aerosol

    GENERAL PURPOSE PRODUCTS CONTINUED ON NEXT PAGE

  • General Purpose Product Product Code Volume Packaged

    Vinyl and Fabric Coating Red HVP107 311gm Aerosol

    Vinyl and Fabric Coating Desert Sand HVP108 311gm Aerosol

    Vinyl and Fabric Coating Medium Gray HVP109 311gm Aerosol

    Vinyl and Fabric Coating Burgundy HVP110 311gm Aerosol

    VInyl and Fabric Coating Charcoal Gray HVP111 311gm Aerosol

    VInyl and Fabric Coating Medium Beige HVP113 311gm Aerosol

    Vinyl and Fabric Coating Medium Blue HVP111 311gm Aerosol

    Crystal Clear Lacquer DA1692 340gm Aerosol

    Trunk Spatter Paint Grey& White Universal DM100 312gm Aerosol

    Trunk Spatter Paint Black & Grey Universal DM102 312gm Aerosol

    Trunk Spatter Paint Black & Aqua 2-Tone DM109 312gm Aerosol

    Trim Paint TP70 311gm Aerosol

    Flexible Bumper Coating Black FB105 311gm Aerosol

    Flexible Bumper Coating Grey FB106 311gm Aerosol

    Flexible Bumper Coatin