How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric...

52
Die Name (Item #) Shape on Die Layers of Cotton Fabric * Pre-Cut Strip Size (width of fabric) Fan Folded Size Cuts Per Pre- Cut Strip Minimum Shapes Yielded Per 42- 44" yard of Fabric Helpful Hints GO! Qubes 3 1/2" Square (3" Finished) Up to 6 4" 4" 10 90 (Shape 1); 1 on die; Cut up to 6 squares at a time. 2" Square (1 1/2" Finished) Up to 6 4 1/2" 4 1/2" 32 256 (Shape 2); 4 on die; Cut up to 24 squares at a time. 3" Finished HST Up to 6 4 3/4" 4" 20 140 (Shape 3); 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew. 3" Finished QST Up to 6 4 3/4" 4 3/4" 32 224 (Shape 4); 4 on die; Cut up to 24 quarter square triangles at a time. 1 1/2" Finished HST Up to 6 5" 2 3/4" 56 392 (Shape 5); 4 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew. 2 5/8" Square on Point (2 1/8" Finished) Up to 6 3" 3" 13 156 (Shape 6); 1 on die; Cut up to 6 squares at a time. 2 1/4" x 2 13/16" Sides (1 1/2" x 2 1/8" Finished) Parallelogram Up to 6 4 3/4" 2" 20 140 (Shape 7); 1 on die; Cut up to 6 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs. 2" x 3 1/2" Rectangle (1 1/2" x 3" Finished) Up to 6 4" 4 1/2" 16 144 (Shape 8); 2 on die; Cut up to 12 rectangles at a time. 4 1/2" Square (4" Finished) Up to 6 5" 5" 8 56 (Shape 1); 1 on die; Cut up to 6 squares at a time. 2 1/2" Square (2" Finished) Up to 6 5 1/2" 5 1/2" 28 168 (Shape 2); 4 on die; Cut up to 24 squares at a time. 4" Finished HST Up to 6 5 1/4" 5 1/4" 14 84 (Shape 3); 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew. 4" Finished QST Up to 6 5 1/2" 5 1/2" 28 168 (Shape 4); 4 on die; Cut up to 24 quarter square triangles at a time. 2" Finished HST Up to 6 3 3/4" 3" 26 234 (Shape 5); 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew. 3 1/4" Square on Point (2 3/4" Finished) Up to 6 3 3/4" 3 3/4" 10 90 (Shape 6); 1 on die; Cut up to 6 squares at a time. 2 3/4" X 3 1/2" Sides (2 1/16" x 2 13/16" Finished) Parallelogram Up to 6 5 3/4" 2 1/2" 16 96 (Shape 7); 1 on die; Cut up to 6 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs. Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up. GO! Qube Mix & Match 6" Block (55775) GO! Qube Mix & Match 8" Block (55776) Call 888.258.7913 or visit accuquilt.com Fabric Reference Chart How to Die Cut GO! Shapes ©2020 AccuQuilt Page 1 of 52 Updated 08/18/2020 Code QQJ29

Transcript of How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric...

Page 1: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

GO! Qubes3 1/2" Square (3"

Finished) Up to 6 4" 4" 10 90 (Shape 1); 1 on die; Cut up to 6 squares at a time.

2" Square (1 1/2" Finished) Up to 6 4 1/2" 4 1/2" 32 256 (Shape 2); 4 on die; Cut up to 24 squares at a time.

3" Finished HST Up to 6 4 3/4" 4" 20 140(Shape 3); 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

3" Finished QST Up to 6 4 3/4" 4 3/4" 32 224 (Shape 4); 4 on die; Cut up to 24 quarter square triangles at a time.

1 1/2" Finished HST Up to 6 5" 2 3/4" 56 392(Shape 5); 4 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

2 5/8" Square on Point (2 1/8" Finished) Up to 6 3" 3" 13 156 (Shape 6); 1 on die; Cut up to 6 squares at a time.

2 1/4" x 2 13/16" Sides (1 1/2" x 2 1/8" Finished)

ParallelogramUp to 6 4 3/4" 2" 20 140

(Shape 7); 1 on die; Cut up to 6 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs.

2" x 3 1/2" Rectangle (1 1/2" x 3" Finished) Up to 6 4" 4 1/2" 16 144 (Shape 8); 2 on die; Cut up to 12 rectangles at a time.

4 1/2" Square (4" Finished) Up to 6 5" 5" 8 56 (Shape 1); 1 on die; Cut up to 6 squares at a time.

2 1/2" Square (2" Finished) Up to 6 5 1/2" 5 1/2" 28 168 (Shape 2); 4 on die; Cut up to 24 squares at a time.

4" Finished HST Up to 6 5 1/4" 5 1/4" 14 84(Shape 3); 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

4" Finished QST Up to 6 5 1/2" 5 1/2" 28 168 (Shape 4); 4 on die; Cut up to 24 quarter square triangles at a time.

2" Finished HST Up to 6 3 3/4" 3" 26 234(Shape 5); 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

3 1/4" Square on Point (2 3/4" Finished) Up to 6 3 3/4" 3 3/4" 10 90 (Shape 6); 1 on die; Cut up to 6 squares at a time.

2 3/4" X 3 1/2" Sides (2 1/16" x 2 13/16"

Finished) ParallelogramUp to 6 5 3/4" 2 1/2" 16 96

(Shape 7); 1 on die; Cut up to 6 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs.

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

GO! Qube Mix & Match 6" Block (55775)

GO! Qube Mix & Match 8" Block (55776)

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

©2020 AccuQuilt Page 1 of 52 Updated 08/18/2020 Code QQJ29

Page 2: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

2 1/2" x 4 1/2" Rectangle (2" x 4" Finished) Up to 6 5" 5 1/2" 14 98 (Shape 8); 2 on die; Cut up to 12 rectangles at a time.

5" Square (4 1/2" Finished) Up to 6 5 1/2" 5 1/2" 7 42 (Shape 1); 1 on die; Cut up to 6 squares at a time.

2 3/4" Square (2 1/4" Finished) Up to 6 3 1/4" 3 1/4" 12 132 (Shape 2); 1 on die; Cut up to 6 squares at a time.

4 1/2" Finished HST Up to 6 5 3/4" 5 3/4" 12 72(Shape 3); 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

4 1/2" Finished QST Up to 6 5 1/2" 3 1/4" 12 72 (Shape 4); 1 on die; Cut up to 6 quarter square triangles at a time.

2 1/4" Finished HST Up to 6 4" 3 1/4" 24 216(Shape 5); 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

3 11/16" Square on Point (3 3/16" Finished) Up to 6 4" 4" 10 90 (Shape 6); 1 on die; Cut up to 6 squares at a time.

2 15/16" x 3 7/8" Sides (2 1/4" x 3 3/16"

Finished) ParallelogramUp to 6 6 1/2" 2 1/2" 16 80

(Shape 7); 1 on die; Cut up to 6 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs.

2 3/4" x 5" Rectangle (2 1/4" x 4 1/2" Finished) Up to 6 5 1/2" 3 1/4" 12 72 (Shape 8); 1 on die; Cut up to 6 rectangles at a time.

5 1/2" Square (5" Finished) Up to 6 6" 6" 6 36 (Shape 1); 1 on die; Cut up to 6 squares at a time.

3" Square (2 1/2" Finished) Up to 6 3 1/2" 3 1/2" 11 110 (Shape 2); 1 on die; Cut up to 6 squares at a time.

5" Finished HST Up to 6 6 1/4" 6 1/4" 12 60(Shape 3); 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

5" Finished QST Up to 6 6 1/2" 6 1/2" 24 120 (Shape 4); 4 on die; Cut up to 24 quarter square triangles at a time.

2 1/2" Finished HST Up to 6 4" 4" 20 180(Shape 5); 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

3 11/16" Square on Point (3 3/16" Finished) Up to 6 4 1/2" 4 1/2" 8 64 (Shape 6); 1 on die; Cut up to 6 squares at a time.

3 3/16" x 4 1/4" Sides (2 1/2" x 3 9/16" Finished)

ParallelogramUp to 6 6 3/4" 3 1/2" 22 110

(Shape 7); 2 on die; Cut up to 12 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs.

3" x 5 1/2" Rectangle (2 1/2" x 5" Finished) Up to 6 6" 6 1/2" 12 72 (Shape 8); 2 on die; Cut up to 12 rectangles at a time.

GO! Qube Mix & Match 9" Block (55777)

GO! Qube Mix & Match 10" Block (55797)

©2020 AccuQuilt Page 2 of 52 Updated 08/18/2020 Code QQJ29

Page 3: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

6 1/2" Square (6" Finished) Up to 6 7" 7' 5 25 (Shape 1); 1 on die; Cut up to 6 squares at a time.

3 1/2" Square (3" Finished) Up to 6 4" 4" 10 90 (Shape 2); 1 on die; Cut up to 6 squares at a time.

6" Finished HST Up to 6 7 14" 7 1/4" 10 40(Shape 3); 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

6" Finished QST Up to 6 7 3/4" 7 3/4" 20 80 (Shape 4); 4 on die; Cut up to 24 quarter square triangles at a time.

3" Finished HST Up to 6 4 3/4" 4" 20 140(Shape 5); 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

4 3/4" Square on Point (4 1/4" Finished) Up to 6 5 1/4" 5 1/4" 7 42 (Shape 6); 1 on die; Cut up to 6 squares at a time.

3 11/16" x 4 15/16" Sides (3" x 4 1/4" Finished)

ParallelogramUp to 6 8" 3" 13 52

(Shape 7); 1 on die; Cut up to 6 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs.

3 1/2" x 6 1/2" Rectangle (3" x 6" Finished) Up to 6 7" 7 1/2" 10 50 (Shape 8); 2 on die; Cut up to 12 rectangles at a time.

1 1/2" x 3" Finished Chisel Up to 6 6 1/4" 2 1/2" 32 160

(Shape 9); 2 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together to cut pairs.

3" Finished Signature Block Up to 6 4" 4" 10 90 (Shape 10); 1 on die; Cut up to 6 signature blocks at a time.

3" Finished Bowties Up to 6 4 1/4" 4 1/4" 36 288 (Shape 11.1); 4 on die; Cut up to 24 bowties at a time; 3" finished size, creates 6" finished block.

3/4" Finished HST Up to 6 3 1/2" 1 3/4" 88 880(Shape 12.1); 4 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

2" x 4" Finished Chisel Up to 6 5" 3" 13 91(Shape 9); 1 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together to cut pairs.

4" Finished Signature Block Up to 6 5" 5" 8 56 (Shape 10); 1 on die; Cut up to 6 signature blocks at a time.

4" Finished Bowties Up to 6 5 1/2" 5 1/2" 28 168 (Shape 11.1); 4 on die; Cut up to 24 bowties at a time; 4" finished size, creates 8" finished block.

1" Finished HST Up to 6 4" 2" 80 720(Shape 12.1); 4 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Qube 6" Companion Set-Corners (55784)

GO! Qube 8" Companion Set-Corners (55785)

GO! Qube Mix & Match 12" Block (55778)

©2020 AccuQuilt Page 3 of 52 Updated 08/18/2020 Code QQJ29

Page 4: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

2 1/4" x 4 1/2" Finished Chisel Up to 6 5 1/2" 3 1/4" 12 84

(Shape 9); 1 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together to cut pairs.

4 1/2" Finished Signature Block Up to 6 5 1/2" 5 1/2" 7 49 (Shape 10); 1 on die; Cut up to 6 signature blocks at a time.

4 1/2" Finished Bowties Up to 6 3" 5 3/4" 12 144 (Shape 11.1); 2 on die; Cut up to 12 bowties at a time; 4 1/2" finished size, creates 9" finished block.

1 1/8" Finished HST Up to 6 4 1/4" 2 1/4" 68 544(Shape 12.1); 4 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

2 1/2" x 5" Finished Chisel Up to 6 6" 3 1/2" 6 36

(Shape 9); 1 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together to cut pairs.

5" Finished Signature Block Up to 6 6" 6" 24 120 (Shape 10); 1 on die; Cut up to 6 signature blocks at a time.

5" Finished Bowties Up to 6 6 1/2" 6 1/2" 64 448 (Shape 11.1); 4 on die; Cut up to 24 bowties at a time; 5" finished size, creates 10" finished block.

1 1/4" Finished HST Up to 6 4 3/4" 4 3/4" 6 36(Shape 12.1); 8 on die; Cut up to 48 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

3" x 6" Finished Chisel Up to 6 7" 4" 10 50(Shape 9); 1 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together to cut pairs.

6" Finished Signature Block Up to 6 7" 7" 5 25 (Shape 10); 1 on die; Cut up to 6 signature blocks at a time.

6" Finished Bowties Up to 6 7 1/4" 7 1/4" 20 80 (Shape 11.1); 4 on die; Cut up to 24 bowties at a time; 6" finished size, creates 12" finished block.

1 1/2" Finished HST Up to 6 5 5 64 448(Shape 12.1); 8 on die; Cut up to 48 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

1 1/2" x 3" Finished Chisel Up to 6 6 1/4" 2 1/2" 32 160

(Shape 9); 2 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together to cut pairs.

3" Finished Signature Block Up to 6 4" 4" 10 90 (Shape 10); 1 on die; Cut up to 6 signature blocks at a time.

GO! Qube 9" Companion Set-Corners (55786)

GO! Qube 12" Companion Set-Corners (55787)

GO! Qube 6" Companion Set-Cl i (55779)

GO! Qube 10" Companion Set-Corners (55798)

©2020 AccuQuilt Page 4 of 52 Updated 08/18/2020 Code QQJ29

Page 5: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

3" Finished Drunkard's Path-Arc Shape Up to 6 4" 4" 10 90 (Shape 11); 3" finished size, creates 6" finished block.

3" Finished Drunkard's Path-Quarter Circle Up to 6 3" 3" 13 156 (Shape 12); 3" finished size, creates 6" finished block.

2" x 4" Finished Chisel Up to 6 5" 3" 13 91(Shape 9); 1 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together to cut pairs.

4" Finished Signature Block Up to 6 5" 5" 8 56 (Shape 10); 1 on die; Cut up to 6 signature blocks at a time.

4" Finished Drunkard's Path-Arc Shape Up to 6 5" 5" 8 56 (Shape 11); 4" finished size, creates 8" finished block.

4" Finished Drunkard's Path-Quarter Circle Up to 6 3 3/4" 3 3/4" 10 90 (Shape 12); 4" finished size, creates 8" finished block.

2 1/4" x 4 1/2" Finished Chisel Up to 6 5 1/2" 3 1/4" 12 84

(Shape 9); 1 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together to cut pairs.

4 1/2" Finished Signature Block Up to 6 5 1/2" 5 1/2" 7 49 (Shape 10); 1 on die; Cut up to 6 signature blocks at a time.

4 1/2" Finished Drunkard's Path-Arc

ShapeUp to 6 5 1/2" 5 1/2" 7 49 (Shape 11); 4 1/2" finished size, creates 9" finished block.

4 1/2" Finished Drunkard's Path-Quarter

CircleUp to 6 4" 4" 10 90 (Shape 12); 4 1/2" finished size, creates 9" finished block.

3" x 6" Finished Chisel Up to 6 7" 4" 10 50(Shape 9); 1 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together to cut pairs.

6" Finished Signature Block Up to 6 7" 7" 5 25 (Shape 10); 1 on die; Cut up to 6 signature blocks at a time.

6" Finished Drunkard's Path-Arc Shape Up to 6 7" 7" 5 25 (Shape 11); 6" finished size, creates 12" finished block.

6" Finished Drunkard's Path-Quarter Circle Up to 6 5" 5" 8 56 (Shape 12); 6" finished size, creates 12" finished block.

3" Finished Triangles in Square-Center Up to 6 4" x length of

fabric (LOF) 10 90

(Shape 13); 1 on die; 3" finished size, creates 6" finished block. Use the Cut & Flip™ method. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to cut and flip by placing fabric wrong side up and align cut angle of fabric with angle of blades. Continue to cut in this manner by flipping the fabric after each cut across the length of fabric.

3" Finished Triangles in Square-Sides Up to 6 2 3/4" 3 3/4" 20 130 pairs (260)

(Shape 14); 2 on die; 3" finished size, creates 6" finished block. To cut pairs of side triangles, layer fabric in equal layers of right sides up and right sides down.

GO! Qube 8" Companion Set-Classics (55780) – Retired

GO! Qube 9" Companion Set-Classics (55781) – Retired

GO! Qube 12" Companion Set-Classics (55782) – Retired

GO! Qube 6" Companion Set-Angles (55788)

Classics (55779) – Retired

©2020 AccuQuilt Page 5 of 52 Updated 08/18/2020 Code QQJ29

Page 6: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

3" Finished Kite Up to 6 4" 10 90

(Shape 15); 1 on die; 3" finished size, creates 6" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the next kite center across the width of fabric.

3" Finished Trapezoid Up to 6 5 1/4" 3 1/2" 22 132 (Shape 16); 2 on die; 3" finished size, creates 6" finished block.

4" Finished Triangles in Square-Center Up to 6 5" x length of

fabric (LOF) 8 56

(Shape 13); 1 on die; 4" finished size, creates 8" finished block. Use the Cut & Flip™ method. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to cut and flip by placing fabric wrong side up and align cut angle of fabric with angle of blades. Continue to cut in this manner by flipping the fabric after each cut across the length of fabric.

4" Finished Triangles in Square-Sides Up to 6 3 1/4" 5" 16 88 pairs (176)

(Shape 14); 2 on die; 4" finished size, creates 8" finished block. To cut pairs of side triangles, layer fabric in equal layers of right sides up and right sides down.

4" Finished Kite Up to 6 5 1/2" 8 48

(Shape 15); 1 on die; 4" finished size, creates 8" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the next kite center across the width of fabric.

4" Finished Trapezoid Up to 6 5 3/4" 17 102

(Shape 16); 1 on die; 4" finished size, creates 8" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the next trapezoid across the width of fabric.

4 1/2" Finished Triangles in Square-Center Up to 6 5 1/2" x length of

fabric (LOF) 7 42

(Shape 13); 1 on die; 4 1/2" finished size, creates 9" finished block. Use the Cut & Flip™ method. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to cut and flip by placing fabric wrong side up and align cut angle of fabric with angle of blades. Continue to cut in this manner by flipping the fabric after each cut across the length of fabric.

4 1/2" Finished Triangles in Square-Sides Up to 6 3 1/2" 5 1/4" 14 70 pairs (140)

(Shape 14); 2 on die; 4 1/2" finished size, creates 9" finished block. To cut pairs of side triangles, layer fabric in equal layers of right sides up and right sides down.

4 1/2" Finished Kite Up to 6 5 1/2"

(Shape 15); 1 on die; 4 1/2" finished size, creates 9" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the next kite center across the width of fabric.

GO! Qube 8" Companion Set-Angles (55789)

GO! Qube 9" Companion Set-Angles (55790)

©2020 AccuQuilt Page 6 of 52 Updated 08/18/2020 Code QQJ29

Page 7: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

4 1/2" Finished Trapezoid Up to 6 5 3/4" 16 96

(Shape 16); 1 on die; 4 1/2" finished size, creates 9" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the next trapezoid across the width of fabric.

5" Finished Triangles in Square-Center Up to 6 6" x length of

fabric (LOF) 6 36

(Shape 13); 1 on die; 5" finished size, creates 10" finished block. Use the Cut & Flip™ method. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to cut and flip by placing fabric wrong side up and align cut angle of fabric with angle of blades. Continue to cut in this manner by flipping the fabric after each cut across the length of fabric.

5" Finished Triangles in Square-Sides Up to 6 4" 6" 12 54 pairs (108)

(Shape 14); 2 on die; 5" finished size, creates 10" finished block. To cut pairs of side triangles, layer fabric in equal layers of right sides up and right sides down.

5" Finished Kite Up to 6 6" 8 48

(Shape 15); 1 on die; 5" finished size, creates 10" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the next kite center across the width of fabric.

5" Finished Trapezoid Up to 6 6 1/4" 12 60

(Shape 16); 1 on die; 5" finished size, creates 10" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the next trapezoid across the width of fabric.

6" Finished Triangles in Square-Center Up to 6 7" x length of

fabric (LOF) 5 25

(Shape 13); 1 on die; 6" finished size, creates 12" finished block. Use the Cut & Flip™ method. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to cut and flip by placing fabric wrong side up and align cut angle of fabric with angle of blades. Continue to cut in this manner by flipping the fabric after each cut across the length of fabric.

6" Finished Triangles in Square-Sides Up to 6 4 1/4" 6 3/4" 10 40 pairs (80)

(Shape 14); 2 on die; 6" finished size, creates 12" finished block. To cut pairs of side triangles, layer fabric in equal layers of right sides up and right sides down.

6" Finished Kite Up to 6 7 1/2" 5 25

(Shape 15); 1 on die; 6" finished size, creates 12" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the next kite center across the width of fabric.

6" Finished Trapezoid Up to 6 9 1/2" 5 1/2" 14 42

(Shape 16); 2 on die; 6" finished size, creates 12" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the next trapezoid across the width of fabric.

GO! Qube 12" Companion Set-Angles (55791)

GO! Qube 10" Companion Set-Angles (55799)

©2020 AccuQuilt Page 7 of 52 Updated 08/18/2020 Code QQJ29

Page 8: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Flower Shapes Up to 6; up to 4 pre-fused Use Scraps Apply fusible web backing prior to cutting.

Flower Accents Up to 6; up to 4 pre-fused Use Scraps Apply fusible web backing prior to cutting.

Basket Up to 6; up to 4 pre-fused Use Scraps Apply fusible web backing prior to cutting.

Little Butterfly Up to 6; up to 4 pre-fused Use Scraps Apply fusible web backing prior to cutting.

Shooting Star-10" Finished Up to 6 Blade: 4 1/4"

Glow: 2 5/8"Blade: 4 5/8"

Glow: 3"Blade: 8Glow: 13

Blade: 64Glow 169 10" Finished Size

3 1/2" Circle Up to 6; up to 4 pre-fused 4" x 4" 10 90 Apply fusible web backing prior to cutting.

1 11/16" Finished Square Up to 6 4 3/4" 4 3/4" 32 224 4 on die; Cut up to 24 squares at a time.

1 11/16" Finished QST Up to 6 3 1/4" 3 1/4" 48 528 4 on die; Cut up to 24 QST's at a time.

3" Finished Bowties Up to 6 4 1/4" 4 1/4" 36 288(Shape 11.1); 4 on die; Cut up to 24 bowties at a time; 3" finished size, creates 6" finished block. Available for GO! Qube Companion Set-Classics owners to complete their Corners Set.

3/4" Finished HST Up to 6 3 1/2" 1 3/4" 88 880

(Shape 12.1); 4 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew. Available for GO! Qube Companion Set-Classics owners to complete their Corners Set.

4" Finished Bowties Up to 6 5 1/2" 5 1/2" 28 168(Shape 11.1); 4 on die; Cut up to 24 bowties at a time; 4" finished size, creates 8" finished block. Available for GO! Qube Companion Set-Classics owners to complete their Corners Set.

1" Finished HST Up to 6 4" 2" 80 720

(Shape 12.1); 4 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew. Available for GO! Qube Companion Set-Classics owners to complete their Corners Set.

4 1/2" Finished Bowties Up to 6 3" 5 3/4" 12 144(Shape 11.1); 2 on die; Cut up to 12 bowties at a time; 4 1/2" finished size, creates 9" finished block. Available for GO! Qube Companion Set-Classics owners to complete their Corners Set.

1 1/8" Finished HST Up to 6 4 1/4" 2 1/4" 68 544

(Shape 12.1); 4 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew. Available for GO! Qube Companion Set-Classics owners to complete their Corners Set.

6" Finished Bowties Up to 6 7 1/4" 7 1/4" 20 80(Shape 11.1); 4 on die; Cut up to 24 bowties at a time; 6" finished size, creates 12" finished block. Available for GO! Qube Companion Set-Classics owners to complete their Corners Set.

1 1/2" Finished HST Up to 6 5 5 64 448

(Shape 12.1); 8 on die; Cut up to 48 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew. Available for GO! Qube Companion Set-Classics owners to complete their Corners Set.

GO! Bowtie Set-6" Finished (2-Die Set)

(55796)

GO! Bowtie Set-4" Finished (2-Die Set)

(55794)

GO! Bowtie Set-4 1/2" Finished (2-Die Set)

(55795)

GO! Bowtie Set-3" Finished (2-Die Set)

(55793)

GO! Qube Specialty Set-Serendipity by Edyta Sitar (55783)

©2020 AccuQuilt Page 8 of 52 Updated 08/18/2020 Code QQJ29

Page 9: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Geometric Shapes

1/2" Circle Up to 6; up to 4 pre-fused 1 5/8" 2 7/8" 104 2,288

3/4" Circle Up to 6; up to 4 pre-fused 2 1/8" 3 7/8" 80 1,280

1" Circle Up to 6; up to 4 pre-fused 2 5/8" 4 7/8" 64 832

1 1/4" Circle Up to 6; up to 4 pre-fused 3 1/8" 5 7/8" 48 528

1 1/2" Circle Up to 6; up to 4 pre-fused 2" 2" 20 360

1 3/4" Circle Up to 6; up to 4 pre-fused 2 1/4" 2 1/4" 17 156

2 1/4" Circle Up to 6; up to 4 pre-fused 2 3/4" 2 3/4" 14 182

2 1/2" Circle Up to 6; up to 4 pre-fused 3" x 3" 13 156

2" Circle Up to 6; up to 4 pre-fused 3" 3" 13 156

3" Circle Up to 6; up to 4 pre-fused 4" 4" 10 90

5" Circle Up to 6; up to 4 pre-fused 6" 6" 6 36

4" Circle Up to 6; up to 4 pre-fused 4 1/2" 4 1/2" 8 64

6" Circle Up to 6; up to 4 pre-fused 6 1/2" 6 1/2" 6 30

7" Circle Up to 6; up to 4 pre-fused 7 1/2" 7 1/2" 5 20

8" Circle Up to 6; up to 4 pre-fused 8 1/2" 8 1/2" 4 16

GO! Circle-6" (55384) 6" Circle Up to 6; up to 4 pre-fused 6 1/2" 6 1/2" 6 30 Apply fusible web backing prior to cutting. Place on die with right side of

fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Circle-1/2", 3/4", 1",

1 1/4" (55484)

8 of each size circle on die.Apply fusible web backing prior to cutting.Includes Free Embroidery Design download.

GO! Big Circle-4", 6", 7", 8" (55462)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Circle-2", 3", 5" (55012) Apply fusible web backing prior to cutting.

GO! Circle-1 1/2", 1 3/4", 2 1/4", 2 1/2" (55155)

©2020 AccuQuilt Page 9 of 52 Updated 08/18/2020 Code QQJ29

Page 10: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Circle-8" (55360) 8" Circle Up to 6; up to 4 pre-fused 8 1/2" 8 1/2" 5 20 Apply fusible web backing prior to cutting. Place on die with right side of

fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Diamond 60°-4" Sides (3 1/2" Finished) (55040)

Diamonds Up to 6 11" 4 1/2" 16 48 2 on die; Cut up to 12 diamonds at a time.

Equilateral Triangle-1 1/2" Sides Up to 6 2" 3" 26 468 or more 2 on die; Cut up to 12 triangles at a time. Open up fabric on fold and cut

an additional triangle. Equilateral Triangles-2"

Sides Up to 6 2 1/2" 3 1/2" 22 308 or more 2 on die; Cut up to 12 triangles at a time. Open up fabric on fold and cut an additional triangle.

Equilateral Triangle-3" Sides Up to 6 3 1/2" 5" 16 160 or more 2 on die; Cut up to 12 triangles at a time. Open up fabric on fold and cut

an additional triangle.

GO! Equilateral Triangle-4 1/2" Sides (4 1/4" Finished) (55429)

Equilateral Triangle-4 1/2" Sides Up to 6 5" 5 1/2" 7 49 1 on die; Cut up to 6 triangles at a time. Open up fabric on fold and cut

an additional triangle.

3" Finished HST Up to 6 5" 4" 20 1402 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

6" Finished QST Up to 6 7" 4" 10 501 on die; Cut up to 6 quarter squares at a time. Open fabric strip out flat, layer fabric if desired, cut one set, continue to move strip over to cut five more triangles across width of fabric.

Half Hexagon-1" Sides Up to 6 2 3/4" 2 1/2" 32 416 2 on die; Cut up to 12 half hexagons at a time.Half Hexagon-1 1/2"

Sides Up to 6 3 1/2" 3 1/2" 22 220 2 on die; Cut up to 12 half hexagons at a time.

Half Hexagon-2 1/2" Sides Up to 6 5 1/2" 5 1/2" 16 96 2 on die; Cut up to 12 half hexagons at a time.

GO! Half Hexagon-4 1/2" Sides (4 1/4" Finished) (55437)

Half Hexagon-4 1/2" Sides Up to 6 9 1/2" 4 3/4" 8 24 1 on die; Cut up to 6 half hexagons at a time.

GO! Half Rectangle Triangle-3" x 6" Finished Rectangle (55411)

Half Rectangle Triangles Up to 6 8 1/4" 4" 20 80 or more 2 on die; Cut up to 12 triangles at a time. Layer fabric right sides up on die.

GO! Half Square Triangle-3/4" Finished Square (55761)

3/4" Finished HST Up to 6 3 1/2" 1 3/4" 88 8804 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-1" Finished Square (55765)

1" Finished HST Up to 6 4" 2" 80 7204 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-1" Finished Square (55320)

1" Finished HST Up to 6 9" 2 1/2" 128 5128 on die; Cut up to 48 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-1 1/8" Finished

Square (55769)1 1/8" Finished HST Up to 6 4 1/4" 2 1/4" 68 544

4 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Hexagon-1", 1 1/2", 2 1/2" Sides (3/4", 1 1/4", 2 1/4" Finished) (55165)

GO! Equilateral Triangles-1 1/2", 2", 3" Sides (55079)

GO! Flying Geese-3 1/2" x 6 1/2" (3" x 6" Finished) (55456)

©2020 AccuQuilt Page 10 of 52 Updated 08/18/2020 Code QQJ29

Page 11: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Half Square Triangle-1 1/4" Finished

Square (55814)1 1/4" Finished HST Up to 6 4 3/4" 4 3/4" 6 36

8 on die; Cut up to 48 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-1 1/2" Finished Square (55319)

1 1/2" Finished HST Up to 6 7 1/2" 3 1/2" 66 264 or more6 on die; Cut up to 36 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-1 1/2" Finished Square (55705)

1 1/2" Finished HST Up to 6 5" 2 3/4" 56 392

4 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-1 1/2" Finished Square (55818)

1 1/2" Finished HST Up to 6 5 5 64 448

8 on die; Cut up to 48 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-2" Finished Square (55018)

2" Finished HST Up to 6 7 1/2" 3" 52 234 or more2 on die; Cut up to 12 half squares at a time. Included on GO! Value Die (55018); For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-2" Finished Square (55712)

2" Finished HST Up to 6 3 3/4" 3" 26 2342 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick upone pair of triangles and sew.

GO! Half Square Triangle-2" Finished Square Multiples (55063)

2" Finished HST Up to 6 9 1/2" 7 1/2" 60 220 or more12 on die; Cut up to 72 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-2 1/4" Finished Square (55147)

2 1/4" Finished HST Up to 6 8" 3 3/4" 44 176 or more4 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-2 1/4" Finished Square (55719)

2 1/4" Finished HST Up to 6 4" 3 1/4" 24 216

2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-2 1/2" Finished Square (55257)

2 1/2" Finished HST Up to 6 8" 3 1/2" 44 1764 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-2 1/2" Finished Square (55807)

2 1/2" Finished HST Up to 6 4" 4" 20 180

2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick upone pair of triangles and sew.

GO! Half Square Triangle-3" Finished Square (55009)

3" Finished HST Up to 6 9 1/2" 4 1/2" 32 or more 1284 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-3" Finished Square (55703)

3" Finished HST Up to 6 4 3/4" 4" 20 140 2 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

©2020 AccuQuilt Page 11 of 52 Updated 08/18/2020 Code QQJ29

Page 12: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Half Square Triangle-4" Finished Square (55031)

4" Finished HST Up to 6 11 1/2" 5 1/2" 28 844 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-4" Finished Square (55710)

4" Finished HST Up to 6 5 1/4" 5 1/4" 14 842 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-4 1/2" Finished Square (55397)

4 1/2" Finished HST Up to 6 6 1/2" 6 302 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-5" Finished Square (Triangle-5 1/2") (55805)

5" Finished HST Up to 6 6 1/4" 6 1/4" 12 60

2 on die; Cut up to 12 half squares at a time. For easy halfsquare triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-6" Finished Square (Triangle-6 1/2") (55001)

6" Finished HST Up to 6 7 1/2" 7 1/2" 10 402 on die; Cut up to 12 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

GO! Half Square Triangle-8" Finished Square (55400)

8" Finished HST Up to 6 19" 10" across width 16 24 or more

4 on die; Cut up to 24 half squares at a time. For easy half square triangles, layer fabrics right sides together on die and cut. Pick up one pair of triangles and sew.

Hexagon-1" Sides Up to 6; up to 4 pre-fused 2 1/2" 2 3/4" 14 196 1 on die; Cut up to 6 hexagons at a time.

Hexagon-1 1/2" Sides Up to 6; up to 4 pre-fused 3 1/2" 3 3/4" 10 100 1 on die; Cut up to 6 hexagons at a time.

Hexagon-2 1/2" Sides Up to 6; up to 4 pre-fused 5 1/2" 5 3/4" 6 36 1 on die; Cut up to 6 hexagons at a time.

GO! Hexagon-4 1/2" Sides (4 1/4" Finished) Hexagon-4 1/2" Sides Up to 6; up to

4 pre-fused 9 1/2" 8 1/2" 4 16 1 on die; Cut up to 6 hexagons at a time.

GO! Isosceles Triangle-5"W x 6"H (4 1/4"W x 5 1/8"H Finished) (55016)

Isosceles Triangles Up to 6 7 1/2" 13 522 on die; Cut up to 12 triangles at a time. Open fabric strip out flat, layer fabric if desired, cut one set then continue to move strip over to cut across width of fabric.

GO! Parallelogram 45°-2 1/4" x 2 13/16" Sides (1 1/2" x 2 1/8" Finished) (55402)

Parallelogram-6" Block Up to 6 10" 4" 40 160

4 on die; Cut up to 24 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs.

GO! Parallelogram 45°-2 1/4" x 2 13/16" Sides (1 1/2" x 2 1/8" Finished) (55707)

Parallelogram-6" Block Up to 6 4 3/4" 2" 20 140

1 on die; Cut up to 6 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs.

GO! Hexagon-1", 1 1/2", 2 1/2" Sides (3/4", 1 1/4", 2 1/4" Finished) (Hexagon-2", 3", 5") (55011)

©2020 AccuQuilt Page 12 of 52 Updated 08/18/2020 Code QQJ29

Page 13: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Parallelogram 45°-2 3/4" x 3 1/2" Sides (2 1/16" x 2 13/16" Finished) (55318)

Parallelogram-8" Block Up to 6 3 1/2" 9 90

2 on die; Cut up to 12 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs.

GO! Parallelogram 45°-2 3/4" x 3 1/2" Sides (2 1/16" x 2 13/16" Finished) (55714)

Parallelogram-8" Block Up to 6 5 3/4" 2 1/2" 16 96

1 on die; Cut up to 6 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs.

GO! Parallelogram 45°-2 15/16" x 3 7/8" (2 1/4" x 3 3/16" Finished) (55148)

Parallelogram-9" Block Up to 6

11" (for pairs)11" x 3" rectangle

(facing same direction)

3" (for pairs)

14 or more (for pairs)

28 (facing same direction)

84

2 on die; Cut up to 12 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs.

GO! Parallelogram 45°-2 15/16" x 3 7/8" (2 1/4" x 3 3/16" Finished) (55721)

Parallelogram-9" Block Up to 6 6 1/2" 2 1/2" 16 80

1 on die; Cut up to 6 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs.

GO! Parallelogram 45°-3 3/16" x 4 1/4" Sides (2 1/2" x 3 9/16") (55809)

Parallelogram-10" Block Up to 6 6 3/4" 3 1/2" 22 110

2 on die; Cut up to 12 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric rightsides together to cut pairs.

GO! Parallelogram 45°-3 11/16" x 4 15/16" Sides (3" x 4 1/4") (55004)

Parallelogram-12" Block Up to 6 4 1/2" 7 56

1 on die; Cut up to 6 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric right sides together to cut pairs.

GO! Parallelogram 45°-3 11/16" x 4 15/16" Sides (3" x 4 1/4") (55723)

Parallelogram-12" Block Up to 6 8" 3" 13 52

1 on die; Cut up to 6 parallelograms at a time. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to move strip over to cut more parallelograms across width of fabric. Layer fabric rightsides together to cut pairs.

GO! Quarter Square Triangle-1 11/16" Finished Square (55750)

1 11/16" Finished QST Up to 6 3 1/4" 3 1/4" 48 528 4 on die; Cut up to 24 QST's at a time.

GO! Quarter Square Triangle-2" Finished Square (55393)

2" Finished QST Up to 6 8" 4" 80 320 or more

8 on die; Cut up to 48 quarter squares at a time. Open fabric strip out flat, layer fabric if desired. Start at selvage end to cut one set of triangles, rotate die, align cut angle of fabric with angle of blades. Continue to cut triangles in this manner across the width of the fabric.

GO! Quarter Square Triangle-3" Finished Square (55396)

3" Finished QST Up to 6 9 1/2" 5 1/2" 56 196 or more

8 on die; Cut up to 48 quarter squares at a time. Open fabric strip out flat, layer fabric if desired. Start at selvage end to cut one set of triangles, rotate die, align cut angle of fabric with angle of blades. Continue to cut triangles in this manner across the width of the fabric.

GO! Quarter Square Triangle-3" Finished Square (55704)

3" Finished QST Up to 6 4 3/4" 4 3/4" 32 224 4 on die; Cut up to 24 quarter square triangles at a time.

©2020 AccuQuilt Page 13 of 52 Updated 08/18/2020 Code QQJ29

Page 14: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Quarter Square Triangle-4" Finished Square (55316)

4" Finished QST Up to 6 4" 13 117

3 on die; Cut up to 18 quarter squares at a time. Open fabric strip out flat, layer fabric if desired. Start at selvage end to cut one set of triangles, rotate die, align cut angle of fabric with angle of blades. Continue to cut triangles in this manner across the width of the fabric.

GO! Quarter Square Triangle-4" Finished Square (55711)

4" Finished QST Up to 6 5 1/2" 5 1/2" 28 168 4 on die; Cut up to 24 quarter square triangles at a time.

GO! Quarter Square Triangle-4" Finished Square by Alex Anderson (55316 or 55047)

Quarter Square Triangles Up to 6 11 1/2" 6" 48 or more 144 or more

8 on die; Cut up to 48 quarter squares at a time. Open fabric strip out flat, layer fabric if desired. Start at selvage end to cut one set of triangles, rotate die, align cut angle of fabric with angle of blades. Continue to cut triangles in this manner across the width of the fabric.

GO! Quarter Square Triangle-4 1/2" Finished Square (55398)

4 1/2" Finished QST Up to 6 11" 4 1/2" 24 72 or more

3 on die; Cut up to 18 quarter squares at a time. Open fabric strip out flat, layer fabric if desired. Start at selvage end to cut one set of triangles, rotate die, align cut angle of fabric with angle of blades. Continue to cut triangles in this manner across the width of the fabric.

GO! Quarter Square Triangle-4 1/2" Finished Square (55718)

4 1/2" Finished QST Up to 6 5 1/2" 3 1/4" 12 72 1 on die; Cut up to 6 quarter square triangles at a time.

GO! Quarter Square Triangle-5" Finished Square (55806)

5" Finished QST Up to 6 6 1/2" 6 1/2" 24 120 4 on die; Cut up to 24 quarter square triangles at a time.

GO! Quarter Square Triangle-6" Finished Square (Triangle-4 7/8") (55002)

6" Finished QST Up to 6 4 1/2" 7 562 on die; Cut up to 12 quarter squares at a time. Open fabric strip out flat, layer fabric if desired, cut one set, continue to move strip over to cut five more triangles across width of fabric.

GO! Quarter Square Triangle-6" Finished Square (55726)

6" Finished QST Up to 6 7 3/4" 7 3/4" 20 80 4 on die; Cut up to 24 quarter square triangles at a time.

GO! Quarter Square Triangle-8" Finished Square (55399)

8" Finished QST Up to 6 6" 4 28

4 on die; Cut up to 24 quarter squares at a time. Open fabric strip out flat, layer fabric if desired. Start at selvage end to cut one set of triangles, rotate die, align cut angle of fabric with angle of blades. Continue to cut triangles in this manner across the width of the fabric.

GO! Rectangle-2" x 3 1/2" (1 1/2" x 3" Finished) (55158)

Rectangle-6" Block Up to 6 4" 4 1/2" 16 144 or more 2 on die; Cut up to 12 rectangles at a time.

GO! Rectangle-2 1/2" x 4 1/2" (2" x 4" Finished) (55159)

Rectangle-8" Block Up to 6 9 1/2" 3" 26 78 or more 2 on die; Cut up to 12 rectangles at a time.

GO! Rectangle-2 1/2" x 4 1/2" (2" x 4" Finished) (55715)

Rectangle-8" Block Up to 6 5" 5 1/2" 14 98 2 on die; Cut up to 12 rectangles at a time.

GO! Rectangle-2 3/4" x 5" (2 1/4" x 4 1/2" Finished) (55107)

Rectangle-9" Block Up to 6 11" 22 88 2 on die; Cut up to 12 rectangles at a time.

©2020 AccuQuilt Page 14 of 52 Updated 08/18/2020 Code QQJ29

Page 15: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Rectangle-2 3/4" x 5" (2 1/4" x 4 1/2" Finished) (55722)

Rectangle-9" Block

Up to 6 5 1/2" 3 1/4" 12 72 1 on die; Cut up to 6 rectangles at a time.

GO! Rectangle-3" x 5 1/2" (2 1/2" x 5" Finished) (55810)

Rectangle-10" Block Up to 6 6" 6 1/2" 12 72 2 on die; Cut up to 12 rectangles at a time.

GO! Rectangle-3 1/2" x 6 1/2" (3" x 6" Finished) (55005)

Rectangle-12" Block Up to 6 7 1/2" 4 1/2" 8 32 or more 1 on die; Cut up to 6 rectangles at a time.

GO! Rectangle-3 1/2" x 6 1/2" (3" x 6" Finished) (55724)

Rectangle-12" Block Up to 6 7" 7 1/2" 10 50 2 on die; Cut up to 12 rectangles at a time.

GO! Rectangle-4 1/2" x 8 1/2" (4" x 8" Finished) (55160)

4 1/2" x 8 1/2" Rectangle Up to 6 9" 5" 8 32 1 on die; Cut up to 6 rectangles at a time.

GO! Square-1 1/2" (1" Finished) (55470) 1" Square Up to 6 5" 5" 72 504 9 on die; Cut up to 54 squares at a time.

GO! Square-2" (1 1/2" Finished) (55022) 2" Square Up to 6 7" 5" 48 240 6 on die; Cut up to 36 squares at a time.

GO! Square-2" (1 1/2" Finished) (55702) 2" Square Up to 6 4 1/2" 4 1/2" 32 256 4 on die; Cut up to 24 squares at a time.

GO! Square-2 1/2" (2" Finished) (55018) 2 1/2" Square Up to 6 3 1/2" 3 1/2" 11 110 1 on die; Cut up to 6 squares at a time. Included on GO! Value Die

(55018).

GO! Square-2 1/2" (2" Finished) (55709) 2 1/2" Square Up to 6 5 1/2" 5 1/2" 28 168 4 on die; Cut up to 24 squares at a time.

GO! Square-2 3/16" (1 11/16" Finished) (55749)

2 3/16" Square Up to 6 4 3/4" 4 3/4" 32 224 4 on die; Cut up to 24 squares at a time.

GO! Square-2 1/2" (2" Finished) Multiples (55059)

2 1/2" Square Up to 6 8 1/2" 8 1/2" 42 168 or more 9 on die; Cut up to 54 squares at a time.

GO! Square on Point-2 5/8" (2 1/8" Finished) (55394)

2 5/8" Square Up to 6 9" 3 1/2" 33 132 or more 3 on die; Cut up to 18 squares at a time.

GO! Square on Point-2 5/8" (2 1/8" Finished) (55706)

2 5/8" Square Up to 6 3" 3" 13 156 1 on die; Cut up to 6 squares at a time.

GO! Square-2 3/4" (2 1/4" Finished) (55395) 2 3/4" Square Up to 6 9" 4" 30 120 3 on die; Cut up to 18 squares at a time.

GO! Square-2 3/4" (2 1/4" Finished) (55717) 2 3/4" Square

Up to 6 3 1/4" 3 1/4" 12 132 1 on die; Cut up to 6 squares at a time.

©2020 AccuQuilt Page 15 of 52 Updated 08/18/2020 Code QQJ29

Page 16: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Square-3" (2 1/2" Finished) (55256) 3" Square Up to 6 9 1/2" 3 1/2" 33 99 3 on die; Cut up to 18 squares at a time.

GO! Square-3" (2 1/2" Finished) (55804) 3" Square Up to 6 3 1/2" 3 1/2" 11 110 1 on die; Cut up to 6 squares at a time.

GO! Square on Point-3 1/4" (2 3/4" Finished) (55317)

3 1/4" Square Up to 6 7 3/4" 4 1/2" 16 72 or more 2 on die; Cut up to 12 squares at a time.

GO! Square on Point-3 1/4" (2 3/4" Finished) (55713)

3 1/4" Square Up to 6 3 3/4" 3 3/4" 10 90 1 on die; Cut up to 6 squares at a time.

GO! Square-3 1/2" (3" Finished) (55006) 3 1/2" Square Up to 6 8" 4 1/2" 16 72 or more 2 on die; Cut up to 12 squares at a time.

GO! Square-3 1/2" (3" Finished) (55701) 3 1/2" Square Up to 6 4" 4" 10 90 1 on die; Cut up to 6 squares at a time.

GO! Square on Point-3 11/16" (3 3/16" Finished) (55106)

3 11/16" Square Up to 6 8 1/4" 4 1/2" 18 72 2 on die; Cut up to 12 squares at a time.

GO! Square on Point-3 11/16" (3 3/16" Finished) (55720)

3 11/16" Square Up to 6 4" 4" 10 90 1 on die; Cut up to 6 squares at a time.

GO! Square-4 1/2" (4" Finished) (55018) 4 1/2" Square Up to 6 5 1/2" 5 1/2" 7 42 1 on die; Cut up to 6 squares at a time. Included on GO! Value Die

(55018).GO! Square-4 1/2" (4" Finished) (55708) 4 1/2" Square Up to 6 5" 5" 8 56 1 on die; Cut up to 6 squares at a time.

GO! Square-4 1/2" (4" Finished) Multiples (55060)

4 1/2" Square Up to 6 10" 10" 16 56 4 on die; Cut up to 24 squares at a time.

GO! Square on Point-4 1/16" (3 9/16" Finished) (55808)

4 1/16" Square Up to 6 4 1/2" 4 1/2" 8 64 1 on die; Cut up to 6 squares at a time.

GO! Square on Point-4 3/4" (4 1/4" Finished) (55019)

4 3/4" Square Up to 6 10 1/2" 5 3/4" 6 or more 36 or more 2 on die; Cut up to 12 squares at a time.

GO! Square on Point-4 3/4" (4 1/4" Finished) (55725)

4 3/4" Square Up to 6 5 1/4" 5 1/4" 7 42 1 on die; Cut up to 6 squares at a time.

GO! Square-5" (4 1/2" Finished) (55010) 5" Square Up to 6 11" 6" 12 or more 36 or more 2 on die; Cut up to 12 squares at a time.

GO! Square-5" (4 1/2" Finished) (55716) 5" Square Up to 6 5 1/2" 5 1/2" 7 42 1 on die; Cut up to 6 squares at a time.

GO! Square-5 1/2" (5" Finished) (55803) 5 1/2" Square Up to 6 6" 6" 6 36 1 on die; Cut up to 6 squares at a time.

GO! Square-6 1/2" (6" Finished) (55000) 6 1/2" Square Up to 6 7 1/2" 7 1/2" 5 20 1 on die; Cut up to 6 squares at a time.

©2020 AccuQuilt Page 16 of 52 Updated 08/18/2020 Code QQJ29

Page 17: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Square-8 1/2" (8" Finished) (55058) 8 1/2" Square Up to 6 9 1/2" 9 1/2" 4 12 or more 1 on die; Cut up to 6 squares at a time.

GO! Big Square-10" (9 1/2" Finished) (55451) 10" Square Up to 6 10 1/2" 10 1/2" 3 9 1 on die; Cut up to 6 squares at a time.

GO! Trapezoid 45°-1 9/16”H x 4 15/16"W Cut (3" Finished Square) (55759)

Trapezoid-3" Finished Square

Up to 6 5 1/4" 3 1/2" 22 132 2 on die; 3" finished size, creates 6" finished block.

GO! Trapezoid 45°-1 15/16”H x 6 3/8"W Cut (4" Finished Square) (55763)

Trapezoid-4" Finished Square

Up to 6 5 3/4" 17 102

1 on die; 4" finished size, creates 8" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the next trapezoid across the width of fabric.

GO! Trapezoid 45°-2 1/16”H x 7 1/16”W Cut (4 1/2" Finished Square) (55767)

Trapezoid-4 1/2" Finished

Up to 6 5 3/4" 16 96

1 on die; 4 1/2" finished size, creates 9" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the nexttrapezoid across the width of fabric.

GO! Trapezoid 45°-2 1/4”H x 7 1/4"W Cut (5" Finished Square) (55823)

Trapezoid-5" Finished Square

Up to 6 6 1/4" 12 60

1 on die; 5" finished size, creates 10" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric stripdownward to align cut angle of fabric with angle of blades to cut the nexttrapezoid across the width of fabric.

GO! Trapezoid 45°-2 5/8”H x 9 3/16"W Cut (6" Finished Square) (55771)

Trapezoid-6" Finished Square

Up to 6 9 1/2" 5 1/2" 14 42

2 on die; 6" finished size, creates 12" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric stripdownward to align cut angle of fabric with angle of blades to cut the next trapezoid across the width of fabric.

Center Triangle (Shape A) Up to 6 3" 12 132 or more Open fabric strip out flat, layer fabric if desired, cut one set then continue

to move strip over to cut across width of fabric.

Side Triangle (Shape B) Up to 6 2 1/2" 26 264 or more To cut pairs of side triangles, layer fabric in equal layers of right sides up and right sides down.

GO! Triangles in Square-Center-3" Finished Square (55751)

Center Triangle Up to 6 4" x length of fabric (LOF) 10 90

1 on die; 3" finished size, creates 6" finished block. Use the Cut & Flip™ method. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to cut and flip by placing fabric wrong side up and align cut angle of fabric with angle of blades. Continue to cut in this manner by flipping the fabric after each cut across the length of fabric.

GO! Triangles in Square-2" Finished Square (55410)

©2020 AccuQuilt Page 17 of 52 Updated 08/18/2020 Code QQJ29

Page 18: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Triangles in Square-Sides-3" Finished Square (55752)

Side Triangle Up to 6 2 3/4" 3 3/4" 20 130 pairs (260)

2 on die; 3" finished size, creates 6" finished block. To cut pairs of side triangles, layer fabric in equal layers of right sides up andright sides down.

Center Triangle (Shape A) Up to 6 4 1/2" 16 128 or more Open fabric strip out flat, layer fabric if desired, cut one set then continue

to move strip over to cut across width of fabric.

Side Triangle (Shape B) Up to 6 6 3/4" 4 1/2" 32 160 or more To cut pairs of side triangles, layer fabric in equal layers of right sides up and right sides down.

GO! Triangles in Square-Center-4" Finished Square (55753)

Center Triangle Up to 6 5" x length of fabric (LOF) 8 56

1 on die; 4" finished size, creates 8" finished block. Use the Cut & Flip™ method. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to cut and flip by placing fabric wrong side up and align cut angle of fabric with angle of blades. Continue to cut in this manner by flipping the fabric after each cut across the length of fabric.

GO! Triangle in Square-Sides-4" Finished Square (55754)

Side Triangle Up to 6 3 1/4" 5" 16 88 pairs (176)2 on die; 4" finished size, creates 8" finished block. To cut pairs of side triangles, layer fabric in equal layers of right sides up and right sides down.

Center Triangle (Shape A) Up to 6 5 1/2" 7 42 Open fabric strip out flat, layer fabric if desired, cut one set then continue

to move strip over to cut across width of fabric.

Side Triangle (Shape B) Up to 6 3 1/2" 14 84 To cut pairs of side triangles, layer fabric in equal layers of right sides up and right sides down.

GO! Triangles in Square-Center-4 1/2" Finished Square (55755)

Center Triangle Up to 6 5 1/2" x length of fabric (LOF) 7 42

1 on die; 4 1/2" finished size, creates 9" finished block. Use the Cut & Flip™ method. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to cut and flip by placing fabric wrong side up and align cut angle of fabric with angle of blades. Continue to cut in this manner by flipping the fabric after each cut across the length of fabric.

GO! Triangles in Square-Sides-4 1/2" Finished Square (55756)

Side Triangle Up to 6 3 1/2" 5 1/4" 14 70 pairs (140)2 on die; 4 1/2" finished size, creates 9" finished block. To cut pairs of side triangles, layer fabric in equal layers of right sides upand right sides down.

GO! Triangles in Square-Center-5" Finished Square (55820)

Center Triangle Up to 6 6" x length of fabric (LOF) 6 36

(Shape 13); 1 on die; 5" finished size, creates 10" finished block. Use the Cut & Flip™ method. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to cut and flip by placing fabric wrong side up and align cut angle of fabric with angle of blades. Continue to cut in this manner by flipping the fabric after each cut across the length of fabric.

GO! Triangles in Square-Sides-5" Finished Square (55821)

Side Triangle Up to 6 4" 6" 12 54 pairs (108)(Shape 14); 2 on die; 5" finished size, creates 10" finished block. To cut pairs of side triangles, layer fabric in equal layers of right sides up andright sides down.

GO! Triangles in Square-Center-6" Finished Square (55757)

Center Triangle Up to 6 7" x length of fabric (LOF) 5 25

1 on die; 6" finished size, creates 12" finished block. Use the Cut & Flip™ method. Open fabric strip out flat, layer fabric if desired, cut shapes, continue to cut and flip by placing fabric wrong side up and align cut angle of fabric with angle of blades. Continue to cut in this manner by flipping the fabric after each cut across the length of fabric.

GO! Triangles in Square-3" Finished Square (55027)

GO! Triangles in Square-4" Finished Square (55409)

©2020 AccuQuilt Page 18 of 52 Updated 08/18/2020 Code QQJ29

Page 19: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Triangles in Square-Sides-6" Finished Square (55821)

Side Triangle Up to 6 4 1/4" 6 3/4" 10 40 pairs (80)2 on die; 6" finished size, creates 12" finished block. To cutpairs of side triangles, layer fabric in equal layers of right sides up and right sides down.

4 1/2" Square Up to 6 5" 5" 8 56 1 on die; Cut up to 6 squares at a time.2 1/2" Square Up to 6 3" 3" 13 156 1 on die; Cut up to 6 squares at a time.

2" Finished Half Square Triangle Up to 6 3" 3 3/4" 20 240 For easy half square triangles, layer fabrics right sides together on die

and cut. Pick up one pair of triangles and sew.Block on Board® (BOB®)

Shape A Up to 3 9" 4" 10 pairs 40 pairs Sub cut strips into 4" x 9" pairs wrong sides together.

Shape B Up to 3 8" 4" 20 80 or more Sub cut strips into 4" x 8" rectangles. Layer rectangles all wrong sides up.

Shape C Up to 3 10 1/2" 4" 20 60 or more Sub cut strips into 4" x 10 1/2" rectangles. Layer rectangles all wrong sides up.

Bowties Up to 6 5 1/2" 16 each size square 96 each size square

Fanfold 5 1/2" strips across the two, 2 ½” squares and the two, 1 ½” squares that are on the right of the die board when the label is facing the handle of the AccuQuilt® Fabric Cutter.

Background Squares Up to 6 5 1/2" 26 156Fanfold 5 1/2" strips across the two, 2 ½” squares that are on the left of the die board when the label is facing the handle of the AccuQuilt® Fabric Cutter.

GO! Bowtie-3" Finished Square (55760)

Bowties Up to 6 4 1/4" 4 1/4" 36 288 4 on die; Cut up to 24 bowties at a time; 3" finished size, creates 6" finished block.

GO! Bowtie-4" Finished Square (55764)

Bowties Up to 6 5 1/2" 5 1/2" 28 168 4 on die; Cut up to 24 bowties at a time; 4" finished size, creates 8" finished block.

GO! Bowtie-4 1/2" Finished Square (55768)

Bowties Up to 6 3" 5 3/4" 12 144 2 on die; Cut up to 12 bowties at a time; 4 1/2" finishedsize, creates 9" finished block.

GO! Bowtie-5" Finished Square (55813)

Bowties Up to 6 6 1/2" 6 1/2" 64 448 4 on die; Cut up to 24 bowties at a time; 5" finished size, creates 10" finished block.

GO! Bowtie-6" Finished Square (55772)

Bowties Up to 6 7 1/4" 7 1/4" 20 80 4 on die; Cut up to 24 bowties at a time; 6" finished size, creates 12" finished block.

Rectangle (A) Up to 6 6 1/4" 2 3/4" 14 70

GO! Value Die (55018)

GO! Blazing Star-6" Finished by Eleanor Burns (55051)

GO! Bowties-4" Finished by Alex Anderson (55413)

©2020 AccuQuilt Page 19 of 52 Updated 08/18/2020 Code QQJ29

Page 20: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Rectangle (B) Up to 6 4 1/2" 2 3/4" 14 112

Square (C) Up to 6 2 3/4" 2 3/4" 14 182

Half Square Triangles (D) Up to 6 3 1/8" 3 1/8" 12 132

Quarter Square Triangle (E) Up to 6 2 3/4" 2" 21 273

Rectangles & Half Square Triangles Up to 6 8 3/4" 4" 20 Rectangles

20 HST's80 Rectangles

80 HST'sCenter Square Up to 6 3 3/4" 6 3/4" 10 90

Rectangles & Half Square Triangles Up to 6 10 3/4" 9 1/2" 16 Rectangles

16 HST's48 Rectangles

48 HST'sCenter Square Up to 6 5" 5" 8 56

GO! Crossed Canoes-9" Finished (55181) A, AR, B and C Shapes Up to 6 6 1/4" 6 1/4" 6 30

Designed to cut one complete two-color block in one pass. Tip: Place 2 layers of one color fabric right sides up and 2 layers of a second fabric color wrong sides up on the blades and cut.

Center Shape Up to 6 10" 10" 4 12Corner Shape Up to 6 3 1/2" 3 1/2" 11 110Football Shape Up to 6 7 1/2" 3" 13 52

Middle Arc Shape Up to 6 3 1/2" 3 1/2" 11 110Arc Shape Up to 6 3 1/2" 3 1/2" 11 110

Total Arc Shape Up to 6 10" 4 1/2" 8 24Center Shape A Up to 6 10 3/4" 10 3/4" 3 9Corner Square B Up to 6 3" 3" 13 156Football Shape C Up to 6 7 3/4" 2 3/4" 14 56

Middle Arc Shape D Up to 6 2 3/4" 3" 13 169End Arc Shape E Up to 6 2 3/4" 3" 13 169

Shapes B, D, E together Up to 6 3 1/4" 9 1/4" 4 of each shape (12)

44 of each shape (132)

Round Plate Up to 6 6" 9" 16 96Pointed Plate Up to 6 6 1/2" 9" 16 80

Circle Up to 6 5" 9" 8 56

GO! Drunkard's Path-3 1/2" Finished (55070)

Arc Shape and Quarter Circle Up to 6 11" 6" 12 sets 36 sets 3 1/2" finished size, creates 7" finished block.

Arc Shape Up to 6 5 1/2" 7 1/2" 10 60Quarter Circle Up to 6 3 3/4" 6 3/4" 10 90

Designed to cut 1 complete 9" block in one pass. Cut 2 layers of background fabric and 2 layers of prints over the rectangles and the half square triangles. Cut 1 layer of fabric for the center square.

GO! Drunkard's Path-4" Finished (55338)

Designed to cut 1 complete 12" block in one pass. Cut 2 layers of background fabric and 2 layers of prints over the rectangles and the half square triangles. Cut 1 layer of fabric for the center square.

GO! Churn Dash-9" Finished (55339)

GO! Chimney Sweep-10" Finished (55222)

GO! Double Wedding Ring-11 1/2" Finished (2-Die Set) (55078)

GO! Dresden Plates (55071)

GO! Big Churn Dash-12" Finished (55459)

This die is specially designed to cut one 2-color, 10" block in one pass through the cutter.

GO! Big Double Wedding Ring-12 1/2" Finished (55258)

4" finished size, creates 8" finished block.

©2020 AccuQuilt Page 20 of 52 Updated 08/18/2020 Code QQJ29

Page 21: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Drunkard's Path-7" Finished (55034)

Arc Shape and Quarter Circle Up to 6 17" 9" 8 sets 16 sets 7" finished size, creates 14" finished block.

Concave Shape Up to 6 13 1/2" 7 1/4" 10 20Convex Shape Up to 6 6 1/2" 9 1/4" 8 40Small Square Up to 6 2" 2" 20 360

Square (A) Up to 6 3 1/4" 3 1/4" 12 132Curved Edge Rectangle

(B) Up to 6 3 1/4" 2 5/8" 15 165

Curved Kite (C) Up to 6 4 1/2" 4 1/2" 8 64Arc Shape (D) Up to 6 10 1/4" 3 13 39

Shape A Up to 6 3 1/8" 2 3/4 14 154Shape B Up to 6 3 1/8" 5 8 88Shape C Up to 6 5 1/8" 5 1/8" 7 49

GO! Hunter Star-6" Finished (55166) Hunter Star Half Units Up to 6 10 1/4" 4" 10 30

Designed to cut one complete 12", two-colored block in 2 passes. First cut 4 layers of one fabric color, then reload and cut 4 layers of your second fabric color.

GO! Kite-Center-3" Finished Square (55758)

Kites Up to 6 4" 10 90

1 on die; 3" finished size, creates 6" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the next kite centeracross the width of fabric.

GO! Kite-Center-4" Finished Square (55762)

Kites Up to 6 5 1/2" 8 48

1 on die; 4" finished size, creates 8" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the next kite centeracross the width of fabric.

Triangles Up to 6 3 1/2" 5 1/4" 7 pairs (14) 70 pairs (140)

Kites Up to 6 5 1/2" 5" 8 (Fanfold)10 (Layer)

48 (Fanfold)60 (Layer)

GO! Kite-Center-4 1/2" Finished Square (55766)

Kites Up to 6 5 1/2"

1 on die; 4 1/2" finished size, creates 9" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric strip downward to align cut angle of fabric with angle of blades to cut the nextkite center across the width of fabric.

GO! Kite-Center-5" Finished Square (55822)

Kites Up to 6 6" 8 48

1 on die; 5" finished size, creates 10" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric stripdownward to align cut angle of fabric with angle of blades to cut the nextkite center across the width of fabric.

GO! Glorified Nine Patch-9" Finished (55557)

Designed to cut one 3-color, 9" block in one pass through the cutt

GO! Hattie's Choice-8" Finished (55220) Designed to cut one 3-color, 8" block in one pass through the cutter.

GO! Kite-4" Finished (55254)

Designed to cut one complete 8" block in one pass. Cut 4 triangle pairs from one fabric and 4 kites from a second fabric. Tip: If you layer the fabric to cut the kite shapes vs. fanfolding, you yield more shapes.

GO! Flowering Snowball-12" Finished (55252)

Designed to cut one complete 12" block in one pass. Cut 4 convex shapes from one fabric, 4 concave shapes from a second fabric and 1 square from a third fabric.

©2020 AccuQuilt Page 21 of 52 Updated 08/18/2020 Code QQJ29

Page 22: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Kite-Center-6" Finished Square (55770)

Kites Up to 6 7 1/2" 5 25

1 on die; 6" finished size, creates 12" finished block. Use the Cut & Shift™ method. Start at one end of fabric, place over the shape, layer fabric if desired. Continue to cut and shift the fabric stripdownward to align cut angle of fabric with angle of blades to cut the nextkite center across the width of fabric.

GO! LeMoyne Star-9" Finished (55453) A, B and C Shapes Up to 6 7 3/4"W x 6 3/4"H Do not fanfold 3 12

Designed to cut one complete two-color block in one pass. Tip: Place 2 layers of one color fabric right sides up and 2 layers of a second fabric color wrong sides up on the blades and cut.

Shape A Up to 6 7" 4 1/8" 9 45Shape B Up to 6 9 1/2" 4 1/8" 9 27Shape C Up to 6 7 1/4" 3 3/4" 10 40

GO! Log Cabin-12" Finished by Leslie Main (55349)

Logs-various sizes Up to 6 23 1/2" 7" 5 block sets from1 1/3 yards

Square (A) Up to 6 3 3/4" 3 3/4" 10 90Half Square Triangles

(B) Up to 6 3 3/4" 3 3/4" 10 90

Half Square Triangles (C) Up to 6 3 3/8" 3 3/8" 11 110

Stem (D) Up to 6 3 3/4" 3 3/4" 10 90Shape A Up to 6 3 1/2" 4" 60 600Shape B Up to 6 4 1/2" 4" 16 128

Quarter Square Triangles Up to 6 5 3/4" 5 3/4" 24 144

Squares Up to 6 5" 5" 8 56Shape A Up to 6 3" 3"Shape H Up to 6 3 3/4" 3 3/4"

Shape C, E, F, G Up to 6 9" 3 5/8"Shapes B, D, E, F Up to 6 7 1/2" 3 5/8"

Block Center Up to 6 9" 9" 4 16

Block Edge Up to 6 9" 6" 12 48

GO! Shooting Star-10" Finished by Edyta Sitar (55747)

Shooting Star-10"Finished Up to 6 Blade: 4 1/4"

Glow: 2 5/8"Blade: 4 5/8"

Glow: 3"Blade: 8Glow: 13

Blade: 64Glow 169 10" Finished Size

GO! Big Snail's Trail-12" Finished (55460) Snail's Trail Block Up to 6 13 1/2" 11 1/4" 3 6 Creates a 12" finished block. Cut 3 complete two-color blocks in one

pass.Squares (A) Up to 6 2" 2" 20 360

Quarter Square Triangle (B) Up to 6 3" 3" 13 156

Half Square Triangle (C) Up to 6 3" 3" 13 156

Quarter Square Triangle (D) Up to 6 5" 5" 8 56

GO! Snail's Trail-8" Finished (55196)

The die is specially designed to cut one 2-color, 8" block in one pass through the cutter.

GO! Maple Leaf-8" Finished (55195)

The die is specially designed to cut 2-color, Maple Leaf block in one pass through the cutter.

Designed to cut one complete 10" block in one pass through the cutter.

GO! Local Color by Bill Kerr (55452)

GO! Ohio Star-12" Finished (55174)

GO! Pineapple-10" Finished (55485)

GO! Rob Peter to Pay Paul-7" Finished (2-Die Set) (55068)

GO! Morning Star-12" Finished (55556)

Designed to cut one complete 12" block in one pass. For a classic Ohio Star quilt block, cut 4 squares from background fabric, 1 square from a print fabric, 8 QSTs from the print fabric and 8 QSTs from the

Creates a 6" x 12" finished block.

©2020 AccuQuilt Page 22 of 52 Updated 08/18/2020 Code QQJ29

Page 23: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Half Square Triangle (E) Up to 6 5" 5" 8 56

Snowball Center Up to 6 7" 7 1/2" 5 25

Triangles Up to 6 3 1/2" 4" 26 260GO! Spider Web-6" Finished (55487) Shapes A, B, C, D Up to 6 8 1/2" 4" 5 complete blocks Each Spider Web block is composed of four 6" finished units to make a

12" finished block. GO! Spool-6"Finished (55180) Spool Block Up to 6 10 1/4" 4" 10 20 Creates a 6" finished block. Cut 3 complete three-color blocks in one

pass. Triangle (A) Up to 6 5 1/2" 2 7/8" 13 78Triangle (B) Up to 6 3 1/2" 4" 10 100Triangle (C) Up to 6 5 1/2" 4" 10 60Triangle (D) Up to 6 7" 5 5/8" 7 35Diamond (A) Up to 6 7" 4" 10 50

Half Rectangle Triangles (B) Up to 6 4 1/4" 3" 13 104

Square (C) Up to 6 2 1/2" 2 1/2" 16 224Quarter Square Triangle

(D) Up to 6 2 1/2" 1 3/4" 22 308

Half Square Triangles (E) Up to 6 2 7/8" 2 7/8" 13 156

Square (F) Up to 6 4" 4" 10 90Quarter Square Triangle

(G) Up to 6 4" 2 1/2" 16 144

Half Square Triangles (H) Up to 6 4 3/8" 4 3/8" 9 72

GO! Winding Ways-8" Finished (55069) A, B and C Shapes Up to 6 10" 8 1/2" 8 of each

shape 24 of each shape Align grain of fabric with straight blades on die.

GO! Wonky Heart-6" Finished (55471) Wonky Heart Block Up to 6 9" 8 3/4" 4 8 Creates 6" finished block. Perfect for 10" precut squares. Cut 6

complete two-color blocks in one pass through the cutter.Classic ShapesGO! Apple Core (55036) Apple Core Up to 6 8" 6 1/2" 6 24 or more 6 1/4" finished size.

GO! Chisels (55039) Chisel Up to 6 11" 4 1/2" 16 48 Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together to cut pairs.

GO! Chisels-1 1/2" x 3" Finished Square (55733)

Chisel Up to 6 6 1/4" 2 1/2" 32 1602 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together tocut pairs.

GO! Chisels-2" x 4" Finished Square (55734)

Chisel Up to 6 5" 3" 13 911 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together tocut pairs.

GO! Chisels-2 1/4" x 4 1/2" Finished Square (55735)

Chisel Up to 6 5 1/2" 3 1/4" 12 841 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together tocut pairs.

The die is specially designed to cut one 3-color, 9" block in one pass through the cutter.

Creates 6" finished block.

Designed to cut one repeating 3-color Storm at Sea block in one pass through the cutter.

GO! Snowball-6" Finished (55330)

GO! Storm at Sea-12" Finished (55221)

GO! Starry Path-9" Finished (55197)

©2020 AccuQuilt Page 23 of 52 Updated 08/18/2020 Code QQJ29

Page 24: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Chisels-2 1/2" x 5" Finished Square (55811)

Chisel Up to 6 6" 3 1/2" 6 361 on die; Layer fabric all wrong sides up or down to cut chisels in the same direction. Place fabric on die right sides together to cut pairs.

GO! Chisels-3" x 6" Finished Square (55736)

Chisel Up to 6 7" 4" 10 501 on die; Layer fabric all wrong sides up or down to cutchisels in the same direction. Place fabric on die right sides together to cut pairs.

GO! Clamshell-4" Finished (55435) Clamshell Up to 6 5" 5" 8 56 It's extremely important to cut with this die on the lengthwise grain with

the selvage edge facing the cutter handle.GO! Clamshell-8" Finished (55436) Clamshell Up to 6 9" 9 1/2" 4 16 It's extremely important to cut with this die on the lengthwise grain with

the selvage edge facing the cutter handle.

Paper Templates Up to 2 72 from 8 1/2" x 11" paper 6 on die; Cut up to 12 paper templates at a time.

Fabric Hexagons Up to 6 5 1/4" 66 396 6 on die; Cut up to 36 hexagons at a time.

Paper Templates Up to 2 16 from 8 1/2" x 11" paper 4 on die; Cut up to 8 paper templates at a time.

Fabric Hexagons Up to 6 6" 32 192 4 on die; Cut up to 24 hexagons at a time.

For use with 3" finished half square triangle Up to 6 6" 6" 9 54 or more

For use with 1" finished half square triangle Up to 6 7 1/2" 3 1/2" 11 44 or more

GO! Signature Block-3" Finished Square (55729)

Signature Block Up to 6 4" 4" 10 90 1 on die; Cut up to 6 signature blocks at a time.

GO! Signature Block-4" Finished Square (55730)

Signature Block Up to 6 5" 5" 8 56 1 on die; Cut up to 6 signature blocks at a time.

GO! Signature Block-4 1/2" Finished Square (55731)

Signature Block Up to 6 5 1/2" 5 1/2" 7 49 1 on die; Cut up to 6 signature blocks at a time.

GO! Signature Block-5" Finished Square (55812)

Signature Block Up to 6 6" 6" 24 120 1 on die; Cut up to 6 signature blocks at a time.

GO! Signature Block-6" Finished Square (55732)

Signature Block Up to 6 7" 7" 5 25 1 on die; Cut up to 6 signature blocks at a time.

GO! Tumbler-3 1/2” (3" Finished) (55015) Tumblers Up to 6 11 1/2" 4 1/2" 24 72 or more

Start at selvage end to cut one tumbler shape, rotate die, align cut angle of fabric with angle of blades. Continue to cut tumblers in this manner across the width of the fabric.

Creates 4 1/2" finished block. Open fabric strip out flat, layer up to six strips, cut one shape. Move strip aligning cut edge of fabric with blade. Continue to cut more shapes in this manner across width of fabric. This orientation keeps corners of the block on the straight grain of fabric.

GO! Signature Block-4 1/2" Finished (55356)

GO! English Paper Piecing Hexagon-1" Finished Sides (55422)

GO! English Paper Piecing Hexagon-1/2" Finished Sides (55420)

©2020 AccuQuilt Page 24 of 52 Updated 08/18/2020 Code QQJ29

Page 25: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Tumbler-4 1/2" (4" Finished) (55445) Tumblers Up to 6 5" 5" 8 56

Start at selvage end to cut one tumbler shape, rotate die, align cut angle of fabric with angle of blades. Continue to cut tumblers in this manner across the width of the fabric.

GO! Tumbler-6 1/2" (6" Finished) (55020) Tumblers Up to 6 7 1/2" 7 28

Start at selvage end to cut one tumbler shape, rotate die, align cut angle of fabric with angle of blades. Continue to cut tumblers in this manner across the width of the fabric.

GO! Wedge-9" Finished (55439) Wedge Up to 6 10" 4" 10 30

Strip Cutters

1" Strips Up to 61 1/2" (for 3

strips), 4 1/2" (for 9 strips)

1 1/2" 3 per 1 1/2" 30 1 on die; Cut up to 6 strips at a time. Position fabric on die on the crosswise grain so folded edge goes through cutter first.

1 1/2" Strips Up to 6 2" (for 3 strips), 6" (for 9 strips) 2" 3 per 2" 21 1 on die; Cut up to 6 strips at a time. Position fabric on die on the

crosswise grain so folded edge goes through cutter first.

2" Strips Up to 62 1/2" (for 3

strips), 7 1/2" (for 9 strips)

2 1/2" 3 per 2 1/2" 16 1 on die; Cut up to 6 strips at a time. Position fabric on die on the crosswise grain so folded edge goes through cutter first.

All 3 Size Strips Up to 65 1/2" (for 3

strips), 16 1/2" (for 9 strips)

5 1/2" 3 per 5 1/2" 21 3 on die; Cut up to 9 strips at a time. Position fabric on die on the crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-1" (1/2" Finished) 7 Strips (55052)

Strips Up to 6 8" (for 7 strips), 24" (for 21 strips) 8" 7 per 8" 31 7 on die; Cut up to 21 strips at a time. Position fabric on die on the

crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-1 1/4" (3/4" Finished) 7 Strips (55109)

Strips Up to 69 3/4" (for 7

strips), 29 1/4" (for 21 strips)

9 3/4" 7 per 9 3/4" 28 7 on die; Cut up to 21 strips at a time. Position fabric on die on the crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-1 1/2" (1" Finished) 5 Strips (55024)

Strips Up to 68 1/2" (for 5

strips), 25 1/2" (for 15 strips)

8 1/2" 5 per 8 1/2" 21 5 on die; Cut up to 15 strips at a time. Position fabric on die on the crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-1 3/4" (1 1/4" Finished) 5 Strips (55083)

Strips Up to 69 3/4" (for 5

strips), 29 1/4" (for 15 strips)

9 3/4" 5 per 9 3/4" 18 5 on die; Cut up to 15 strips at a time. Position fabric on die on the crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-2" (1 1/2" Finished) 4 Strips (55025)

Strips Up to 6 9" (for 4 strips), 27" (for 12 strips) 9" 4 per 9" 16 4 on die; Cut up to 12 strips at a time. Position fabric on die on the

crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-2 1/4" (1 3/4" Finished) 4 Strips (55053)

Strips Up to 6 10" (for 4 strips), 30" (for 12 strips) 10" 4 per 10" 14 4 on die; Cut up to 12 strips at a time. Position fabric on die on the

crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-2 1/2" (2" Finished) 2 Strips (55014)

Strips Up to 6 6" (for 2 strips), 18" (for 6 strips) 6" 2 per 6" 12 2 on die; Cut up to 6 strips at a time. Position fabric on die on the

crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-1", 1 1/2", 2" (1/2", 1", 1 1/2" Finished) 3 Strips (55164)

©2020 AccuQuilt Page 25 of 52 Updated 08/18/2020 Code QQJ29

Page 26: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Strip Cutter-2 1/2" (2" Finished) 3 Strips (55017)

Strips Up to 68 1/2" (for 3

strips), 25 1/2" (for 9 strips)

8 1/2" 3 per 8 1/2" 12 3 on die; Cut up to 9 strips at a time. Position fabric on die on the crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-3" (2 1/2" Finished) 3 Strips (55084)

Strips Up to 6 7" (for 2 strips), 21" (for 6 strips) 7" 2 per 7" 10 3 on die; Cut up to 9 strips at a time. Position fabric on die on the

crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-3 1/2" (3" Finished) 2 Strips (55032)

Strips Up to 6 8" (for 2 strips), 24" (for 6 strips) 8" 2 per 8" 9 2 on die; Cut up to 6 strips at a time. Position fabric on die on the

crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-4" (3 1/2" Finished) 2 Strips (55085)

Strips Up to 6 9" (for 2 strips), 27" (for 6 strips) 9" 2 per 9" 8 2 on die; Cut up to 6 strips at a time. Position fabric on die on the

crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-4 1/2" (4" Finished) 2 Strips (55054)

Strips Up to 6 10" (for 2 strips), 30" (for 6 strips) 10" 2 per 10" 7 2 on die; Cut up to 6 strips at a time. Position fabric on die on the

crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-5" (4 1/2" Finished) 1 Strip (55023)

Strips Up to 6 5 1/2" (for 1 strip), 17" (for 3 strips) 5 1/2" 1 per 5 1/2" 6 1 on die; Cut up to 3 strips at a time. Position fabric on die on the

crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-5 1/2" (5" Finished) 1 Strip (55026)

Strips Up to 66 1/2" (for 1 strip),

19 1/2" (for 3 strips)

6 1/2" 1 per 6 1/2" 5 or more 1 on die; Cut up to 3 strips at a time. Position fabric on die on the crosswise grain so folded edge goes through cutter first.

GO! Strip Cutter-6 1/2" (6" Finished) 1 Strip (55086)

Strips Up to 67 1/2" (for 1 strip),

22 1/2" (for 3 strips)

7 1/2" 1 per 7 1/2" 4 1 on die; Cut up to 3 strips at a time. Position fabric on die on the crosswise grain so folded edge goes through cutter first.

Borders

1 11/16" Teardrop Up to 6; up to 4 pre-fused 2" 1 1/4" 32 576

3 1/2" Teardrop Up to 6; up to 4 pre-fused 4" 2 1/2" 16 144

4 7/16" Teardrop Up to 6; up to 4 pre-fused 5" 3" 13 91

1 7/16" Drop Up to 6; up to 4 pre-fused 2" 2" 20 360

3 5/16" Teardrop Up to 6; up to 4 pre-fused 4" 3 1/4" 12 108

3 1/4" Curl Up to 6; up to 4 pre-fused 3 3/4" 3" 13 130

3" Florish Up to 6; up to 4 pre-fused 3 1/2" 2" 20 200

GO! Heather Feather Border Collection by

©2020 AccuQuilt Page 26 of 52 Updated 08/18/2020 Code QQJ29

Page 27: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

1 13/16" Drop Up to 6; up to 4 pre-fused 2" 2" 20 200

2 3/8" Teardrop Up to 6; up to 4 pre-fused 3" 2" 20 240

2 7/16 Teardrop Up to 6; up to 4 pre-fused 3" 2 1/2" 16 192

2 5/8" Teardrop Up to 6; up to 4 pre-fused 3" 3" 13 156

2 1/4" Teardrop Up to 6; up to 4 pre-fused 3" 3" 13 156

1 7/8" Cresent Up to 6; up to 4 pre-fused 2" 2" 20 200

1 5/8" Teardrop Up to 6; up to 4 pre-fused 2" 2" 20 200

2 5/16" Teardrop Up to 6; up to 4 pre-fused 3" 3 1/4" 12 144

2 1/8" Teardrop Up to 6; up to 4 pre-fused 4 1/4" 2 1/2" 16 128

15/16" Teardrop Up to 6; up to 4 pre-fused 1 1/4" 2" 20 560

1 1/8" Teardrop Up to 6; up to 4 pre-fused 1 3/4" 2 3/4" 22 286

1 3/8" Florish Up to 6; up to 4 pre-fused 2" 3" 13 234

2 1/16" Teardrop Up to 6; up to 4 pre-fused 2 3/4" 2 1/2" 16 208

2 7/8" Swoop Up to 6; up to 4 pre-fused 2 1/2" 2 3/4" 14 196

2 3/16"H Ribbon Up to 6; up to 4 pre-fused 2 1/2" 2 1/2" 20 360 Layer fabric all wrong sides up or down to cut ribbon in the same

direction. Place fabric on die right sides together to cut pairs.

Border Collection by

Sarah Vedeler (55414) 32", 48", 64", 80" Heather Feather

Borders

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Heather Feather Border Collection by

Sarah Vedeler (55414) 32", 48", 64", 80" Heather Feather

Borders

©2020 AccuQuilt Page 27 of 52 Updated 08/18/2020 Code QQJ29

Page 28: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

2 11/16"H Ribbon Up to 6; up to 4 pre-fused 3" 3" 14 168 Layer fabric all wrong sides up or down to cut ribbon in the same

direction. Place fabric on die right sides together to cut pairs.

4 1/2"H Ribbon Up to 6; up to 4 pre-fused 5" 5" 8 48 Layer fabric all wrong sides up or down to cut ribbon in the same

direction. Place fabric on die right sides together to cut pairs.

6 7/8"H Ribbon Up to 6; up to 4 pre-fused 9" 4" 10 40 Layer fabric all wrong sides up or down to cut ribbon in the same

direction. Place fabric on die right sides together to cut pairs.

7 1/4"H Ribbon Up to 6; up to 4 pre-fused 7 1/2" 3 1/2" 12 40 Layer fabric all wrong sides up or down to cut ribbon in the same

direction. Place fabric on die right sides together to cut pairs.

2" Rick Rack Up to 4 pre-fused

6" (for 2 mirror image strips), 3"

(same orientation)

Fold 6" strips in half with selvages

matching (3" x 20" rectangle)

4 per 6"4 per 3" 12 or more

Rick Rack strips can be cut to desired length using the lengthwise grain of fabric and placing folds at the ends of the die blades. Pre-fuse fabric with fusible web backing prior to cutting.

4" Rick Rack Up to 4 pre-fused

10" (for 2 mirror image strips), 5"

(same orientation)

Fold 10" strips in half with selvages

matching (5" x 20" rectangle)

4 per 10"4 per 5" 7 or more

Rick Rack strips can be cut to desired length using the lengthwise grain of fabric and placing folds at the ends of the die blades. Apply fusible web backing prior to cutting.

GO! Scallop Border (55417)

21" Scallop or Pointed Border

Up to 4 pre-fused 21"

The width of the strip can vary. Borders can be cut to desired length using the lengthwise grain of fabric and placing folds at the ends of the blade.

Scalloped Swag Up to 6; up to 4 pre-fused 13" 5" 8 16

Apply fusible web backing prior to cutting. Place on die with right side of

GO! Swag by Alex

GO! Ribbon Twist (55055)

GO! Rick Rack (55056)

©2020 AccuQuilt Page 28 of 52 Updated 08/18/2020 Code QQJ29

Page 29: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Crescent Swag Up to 6; up to 4 pre-fused 13" 5 1/2" 7 14

Rag ShapesGO! Rag Circle-6 1/2" (55170) Rag Circles

1 of denim; up to 2 of flannel or

7 1/2" 7 1/2" 5 20 Create faux cathedral window projects using Heather Banks' simple construction method that is "quilt as you go".

GO! Rag Square-5 1/4" (55033) Rag Squares Up to 2 of

flannel 11 1/2" 6" 12 36 60" wide fabric cuts 60 or more 5 1/4" rag squares.

GO! Rag Square-8 1/2" (55013) Rag Squares Up to 2 of

flannel 9 1/2" 9 1/2" 4 12 60" wide fabric cuts 18 or more 8 1/2" rag squares.

Appliqué Shapes (Apply fusible web product to wrong sides of fabric, following manufacturer's instructions, before cutting for easy appliqué.)

Plane Up to 6; up to 4 pre-fused 4 1/2" 4 3/4" 8 64

Bi-Plane Up to 6; up to 4 pre-fused 5 3/4" 3 3/4" 10 54

Circle Up to 6; up to 4 pre-fused Use scraps

Windshield Up to 6; up to 4 pre-fused Use scraps

Propeller Up to 6; up to 4 pre-fused Use scraps

Struts Up to 6; up to 4 pre-fused Use scraps

Angel Up to 6; up to 4 pre-fused 7 1/4" 4" 10 40

Wings Up to 6; up to 4 pre-fused 4" 2 3/4" 14 126

Arabesque-Large Fern Up to 2 pre-fused 9" 8 1/2" 4 16

Arabesque-Medium Fern Up to 2 pre-fused 7" 6 3/4" 5 30

Arabesque-Small Fern Up to 2 pre-fused 3 3/4" 3 3/4" 10 90

GO! Arabesque #2 by Ricky Tims (55049) Arabesque Up to 2 pre-

fused 9" 9" 4 16 Apply fusible web backing prior to cutting. Use positive and negative shapes.

GO! Arabesque #3 by Ricky Tims(55050) Arabesque Up to 2 pre-

fused 9 1/2" 9 1/2" 4 12 or more Apply fusible web backing prior to cutting. Use positive and negative shapes.

fabric up and cut. Place fabric on die right sides together to cut pairs.

Anderson (55108)

Apply fusible web backing prior to cutting. Use positive and negative shapes.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Arabesque #1 by Ricky Tims (55046)

GO! Angel (55418)

GO! Airplanes (55366)Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs. Includes Free Embroidery Design download.

©2020 AccuQuilt Page 29 of 52 Updated 08/18/2020 Code QQJ29

Page 30: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Awareness Ribbon (55355) Awareness Ribbon Up to 6; up to

4 pre-fused 5 1/2" 3" 14 168 Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Bear Up to 6; up to 4 pre-fused 5" 5" 8 56

Duck Up to 6; up to 4 pre-fused 5" 5" 8 56

Accent Shapes Up to 6; up to 4 pre-fused Use scraps

GO! Bird (55352) Bird Up to 6; up to 4 pre-fused 4 1/2" 4" 10 36 Apply fusible web backing prior to cutting. Place on die with right side of

fabric down and cut. Place fabric on die right sides together to cut pairs.

Wide Bird Up to 6; up to 4 pre-fused 4 1/2" 5 1/2" 7 56

Bird with Pointed Tail Up to 6; up to 4 pre-fused 3 3/4" 6 1/4" 6 54

Bird with Rounded Tail Up to 6; up to 4 pre-fused 4" 6 1/4" 6 54

Wings Up to 6; up to 4 pre-fused Use scraps

Shape A Up to 6; up to 4 pre-fused 3 1/2" 5 1/2" 7 70

Shape B Up to 6; up to 4 pre-fused 2 3/4" 4" 10 130

Shape C Up to 6; up to 4 pre-fused 3" 5" 8 96

Shape D Up to 6; up to 4 pre-fused 2" 5 1/2" 7 126

Misc Shapes Up to 6; up to 4 pre-fused Use scraps

Feather Up to 6; up to 4 pre-fused 11 1/2" 4 1/2" 8 24

Scroll Up to 6; up to 4 pre-fused 7" 6 1/2" 6 30

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Baby, Baby (55037)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Bohemia #2 by Ricky Tims (55364)

GO! Birds (55324)

GO! Bohemia #1 by Ricky Tims (55368)

©2020 AccuQuilt Page 30 of 52 Updated 08/18/2020 Code QQJ29

Page 31: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Urn Up to 6; up to 4 pre-fused 5" 5 1/2" 7 49

Small Bow Up to 6; up to 4 pre-fused 2 1/4" 3" 13 156

Medium Bow Up to 6; up to 4 pre-fused 3" 4" 10 120

Large Bow Up to 6; up to 4 pre-fused 5" 4" 8 80

GO! Basket by Edyta Sitar (55746) Basket with handle set Up to 6; up to

4 pre-fused 6" 6" 6 36 Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Upper Wing Up to 6; up to 4 pre-fused 4 5/8" 4" 10 70

Lower Wing Up to 6; up to 4 pre-fused 4 3/8" 3 7/8" 10 80

Body Up to 6; up to 4 pre-fused Use scraps

Top Wings Up to 6; up to 4 pre-fused 2" 2" 20 360

Body Up to 6; up to 4 pre-fused 3/4" 2 1/4" 40 640

Bottom Wings Up to 6; up to 4 pre-fused 2 1/4" 3" 17 204

Camper Up to 6; up to 4 pre-fused 6 3/4" 5 1/8" 7 35

Side Accent Up to 6; up to 4 pre-fused 6 5/8" 1 3/8" 29 145

Door Up to 6; up to 4 pre-fused 1 3/4" 3 1/8" 12 240

Door Window Up to 6; up to 4 pre-fused 1 1/4" 1 1/4" 32 896

GO! Butterfly by Edyta Sitar (55467)

Apply fusible web backing prior to cutting. Tip: If using pre-cut 10" squares, fold 10" square in half, place on blade and cut.

GO! Bow-2 1/2", 3 1/2", 4 1/2" (55341)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Butterfly by Edyta Sitar (55468)

GO! Camper (55228) Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

©2020 AccuQuilt Page 31 of 52 Updated 08/18/2020 Code QQJ29

Page 32: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Window Up to 6; up to 4 pre-fused 1 3/4" 1 1/2" 26 520

Wheel/Circle Up to 6; up to 4 pre-fused 1 7/8" 1 7/8" 21 399

Inner Wheel/Circle Up to 6; up to 4 pre-fused 1 3/8" 1 3/8" 29 754

GO! Calico Cat (55065) Cat Up to 6; up to 4 pre-fused 4" 5 1/2" 7 63 Apply fusible web backing prior to cutting. Place on die with right side of

fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Cardinal (55351) Cardinal Up to 6; up to 4 pre-fused 5" 4 1/2" 9 54 Apply fusible web backing prior to cutting. Place on die with right side of

fabric down and cut. Place fabric on die right sides together to cut pairs.

Sets of Letters Up to 6; up to 4 pre-fused 10" 10" 1 set 3 or more sets

Individual Letters Up to 6; up to 4 pre-fused 4" 4" 10 letters 90 or more letters

Sets of Numbers Up to 6; up to 4 pre-fused 10" 10" 4 sets 12 or more sets

Individual Numbers Up to 6; up to 4 pre-fused 4" 4" 13 numbers 117 or more numbers

Bat Up to 6; up to 4 pre-fused 6" x 10" 6 18

Cat Up to 6; up to 4 pre-fused 6" x 9" 6 24

GO! Circle-3 1/2" (55748) Circle Up to 6; up to

4 pre-fused 4" x 4" 10 90 Apply fusible web backing prior to cutting.

Sets of Letters Up to 6; up to 4 pre-fused 24" 10 1/2" 3 3

Individual Letters Up to 6; up to 4 pre-fused 3 1/4" 2 1/2" 16 176

Large Rose Up to 6; up to 4 pre-fused 3" 3 1/2" 13 156

GO! Classic 2" Alphabet Uppercase Set (55559)

Apply fusible web backing prior to cutting. Place on die with right sides of fabric down and cut.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Carefree Numbers (55099)

GO! Carefree Alphabet Set (2-Die Set) (55092)

GO! Cat & Bat (55365)

©2020 AccuQuilt Page 32 of 52 Updated 08/18/2020 Code QQJ29

Page 33: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Medium Rose Up to 6; up to 4 pre-fused 2" 1 3/4" 24 432

Small Rose Up to 6; up to 4 pre-fused 1 1/2" 1 1/2" 28 672

Rose Bud Up to 6; up to 4 pre-fused 2" 1 1/2" 28 504

Rough Leaf Up to 6; up to 4 pre-fused 1 1/2" 1 1/2" 28 672

Smooth Leaf Up to 6; up to 4 pre-fused 3" 3 1/2" 13 156

Large Petal Up to 6; up to 4 pre-fused 4" 2 1/2" 16 144

Medium Petal Up to 6; up to 4 pre-fused 3" 2" 14 294

Small Petal Up to 6; up to 4 pre-fused 2 1/2" 1 1/2" 28 392

1 1/8" Center Up to 6; up to 4 pre-fused Use scraps

13/16" Center Up to 6; up to 4 pre-fused Use scraps

9/16" Center Up to 6; up to 4 pre-fused Use scraps

Dragonfly Up to 6; up to 4 pre-fused 6" 5" 7 56

Bee Up to 6; up to 4 pre-fused 6" 5" 7 56

Butterfly Up to 6; up to 4 pre-fused 6" 5" 7 56

Cupcake Top-Rounded Up to 6; up to 4 pre-fused 3" 4 3/4" 8 96

Cupcake Top-Pointed Up to 6; up to 4 pre-fused 2 1/2" 4 1/4" 9 126

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.GO! Cupcake (55097)

GO! Critters (55030)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Coming Up Roses by Michelle Griffith (55150)

GO! Crazy Petals (55326)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

©2020 AccuQuilt Page 33 of 52 Updated 08/18/2020 Code QQJ29

Page 34: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Cupcake Base Up to 6; up to 4 pre-fused 4" 4" 10 90

Car Up to 6; up to 4 pre-fused 6" 4" 10 60

Windows Up to 6; up to 4 pre-fused 3 1/2" 1 1/2" 26 sets 286 sets

Wheels Up to 6; up to 4 pre-fused 3" 1 1/2" 24 288 sets

Large Petal Up to 6; up to 4 pre-fused 3" 4" 40 480

Small Petal Up to 6; up to 4 pre-fused 2 1/2" 3" 52 or more 728 or more

1 1/4" Circle Up to 6; up to 4 pre-fused 2" 2" 20 360

3/4" Circle Up to 6; up to 4 pre-fused 1 1/2" 1 1/2" 26 624

Canopy Up to 6; up to 4 pre-fused 9 1/4" 4 1/2" 8 24

Handle Up to 6; up to 4 pre-fused 5 5/8" 2 1/4" 17 102

Accent Shape Up to 6; up to 4 pre-fused 5 1/4" 2 3/4" 14 84

Cap Up to 6; up to 4 pre-fused Use scraps

GO! Dove (55350) Dove Up to 6; up to 4 pre-fused 5" 6 1/2" 6 30 Apply fusible web backing prior to cutting. Place on die with right side of

fabric down and cut. Place fabric on die right sides together to cut pairs.

Head Up to 6; up to 4 pre-fused 4 1/4" 4 1/4" 9 72

Wings Up to 6; up to 4 pre-fused 4 1/2" 8" 5 40

GO! Cute Car (55354) Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Daisy (55327) Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Dancing Umbrella by Edyta Sitar (55178)

©2020 AccuQuilt Page 34 of 52 Updated 08/18/2020 Code QQJ29

Page 35: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Talons Up to 6; up to 4 pre-fused 3" 2" 20 240

Tail Feathers Up to 6; up to 4 pre-fused 5 1/2" 5" 7 35

Shield Up to 6; up to 4 pre-fused 5" 5" 8 56

Olive Branch Up to 6; up to 4 pre-fused 2 3/4" 3 1/2" 11 143

Large Elephant Up to 6; up to 4 pre-fused 5" 4 1/2" 8 56

Small Elephant Up to 6; up to 4 pre-fused 4" 3" 10 120

Large Ear Up to 6; up to 4 pre-fused Use scraps

Small Ear Up to 6; up to 4 pre-fused Use scraps

5 1/2" Circle Up to 6; up to 4 pre-fused 6" 6" 6 36

1 3/4" Circle Up to 6; up to 4 pre-fused Use scraps

3/4" Circle Up to 6; up to 4 pre-fused Use scraps

Sunglasses Up to 6; up to 4 pre-fused 5" 2" 20 144

Heart Up to 6; up to 4 pre-fused 2 1/4" 2" 20 308

Tongue Up to 6; up to 4 pre-fused 2" 2 1/4" 17 320

Tear Up to 6; up to 4 pre-fused 1 5/8" 2 5/8" 15 330

Eyebrow Up to 6; up to 4 pre-fused Use scraps

Mouth/Smile Up to 6; up to 4 pre-fused 3 1/4" 1 1/2" 26 288

Maple Leaf Up to 6; up to 4 pre-fused 6" 6" 6 36

GO! Emojis (55191) Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Eagle by Eleanor Burns (55383)

Layer fabric all wrong sides up or down to cut design in the same direction. Place fabric on die right sides together to cut pairs.

GO! Elephants (55373)Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.Includes Free Embroidery Design download.

©2020 AccuQuilt Page 35 of 52 Updated 08/18/2020 Code QQJ29

Page 36: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Oak Leaf Up to 6; up to 4 pre-fused 4" 5" 8 72

Pumpkin Up to 6; up to 4 pre-fused 5" 5 1/2" 7 49

Acorn and Cap Up to 6; up to 4 pre-fused 4 1/4" 2 3/4" 14 pairs 112 pairs

Large Pinked Circle Up to 6; up to 4 pre-fused 6" 6" 6 36

Small Pinked Circle Up to 6; up to 4 pre-fused 4 1/2" 4 /2" 8 64

Large Petal Up to 6; up to 4 pre-fused 6" 5" 8 48

Small Petal Up to 6; up to 4 pre-fused 5" 3 1/2" 11 77

Narrow Leaf Up to 6; up to 4 pre-fused 6" 2 1/2" 17 102

Spiral Up to 6; up to 4 pre-fused 4 1/2" 2 1/2" 16 128

Feathers Up to 6; up to 4 pre-fused 5" 3 3/4" 30 or more 210 or more

Tear Drops Up to 6; up to 4 pre-fused 5" 3 3/4" 30 or more 210 or more

GO! Fleur De Lis (55345) Fleur De Lis Up to 6; up to

4 pre-fused 4 3/4" 5 1/2" 8 56 Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Flower (55446) Flower Up to 6; up to 4 pre-fused 4" 4 3/8" 9 81 Apply fusible web backing prior to cutting.

Straight Stem Up to 6; up to 4 pre-fused 6 1 1/4" 96 574

Curved Stem Up to 6; up to 4 pre-fused 6 1/2" 2" 20 100

GO! Fantasy Flowers by Robbi Joy Eklow (55381)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Fall Medley (55041)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.GO! Feathers (55008)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

©2020 AccuQuilt Page 36 of 52 Updated 08/18/2020 Code QQJ29

Page 37: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Long Petal Up to 6; up to 4 pre-fused 1 2 1/2" 16 528

Leaf Up to 6; up to 4 pre-fused 2 3/4" 4 1/2" 8 104

Small Petal Up to 6; up to 4 pre-fused 1 1/4" 1" 40 800

Small Flower Up to 6; up to 4 pre-fused 2 1/4" 2 1/4" 17 272

Medium Flower Up to 6; up to 4 pre-fused 4" 3 3/4" 10 90

Large Flower Up to 6; up to 4 pre-fused 4" 4" 10 90

Leaf Up to 6; up to 4 pre-fused 3" 1" 40 480

Circle/Center Up to 6; up to 4 pre-fused Use scraps

Leaf Up to 6; up to 4 pre-fused 1 1/4" 2" 32 576

Little Flower Up to 6; up to 4 pre-fused 1 1/4" 1 1/4" 32 896

Little Circles Up to 6; up to 4 pre-fused 1" 2' 60 2160

Big Cirlces Up to 6; up to 4 pre-fused 1 1/4' 2 1/4' 32 512

Heart Up to 6; up to 4 pre-fused 2 1/4" 2 1/4" 17 272

Large Circle Up to 6; up to 4 pre-fused 2" 2" 20 360

Star Up to 6; up to 4 pre-fused 2 1/2" 2 1/2" 16 224

GO! Flower Shapes by Edyta Sitar (55744)

GO! Flower Accents by Edyta Sitar (55745) Apply fusible web backing prior to cutting.

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Flower Bunch (55332)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

©2020 AccuQuilt Page 37 of 52 Updated 08/18/2020 Code QQJ29

Page 38: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Flower Up to 6; up to 4 pre-fused 3' 3' 13 156

4" Circle Up to 6; up to 4 pre-fused 4 1/2" 4 1/2" 8 84

6 1/16" Flower Petal Up to 6; up to 4 pre-fused 6 1/2" 3 1/2" 10 70

3 5/16" Flower Petal Up to 6; up to 4 pre-fused 4 1/2" 2 1/2" 14 98

2 5/16" Flower Petal Up to 6; up to 4 pre-fused 3" 1 1/2" 21 147

Rooster Up to 6; up to 4 pre-fused 6" 6" 7 36

Hen Up to 6; up to 4 pre-fused 6" 5 1/2" 6 36

Eggs Up to 6; up to 4 pre-fused 4 1/2" 2" 18 182

Fork Up to 6; up to 4 pre-fused 9 7/8" 2" 20 60

Knife Up to 6; up to 4 pre-fused 10 3/4" 1 1/2" 26 78

Spoon Up to 6; up to 4 pre-fused 8" 2 1/4" 17 68

GO! Fun Flower (55334) Flower Up to 6; up to

4 pre-fused 5" 5" 8 56 Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Large Flowers Up to 6; up to 4 pre-fused 5" 5" 8 56

Small Flower Up to 6; up to 4 pre-fused 2 1/2" 2 1/2" 16 or more 224 or more

Flower Centers Up to 6; up to 4 pre-fused Use scraps

GO! Folk Art Fowl by Bill Kerr (55375)

GO! Flower Power by Sarah Vedeler (55309)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Funky Flowers (55042)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Fork-Knife-Spoon (55261)

©2020 AccuQuilt Page 38 of 52 Updated 08/18/2020 Code QQJ29

Page 39: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

GO! Gingerbread Cookie (55862) Gingerbread Cookie Up to 6; up to

4 pre-fused 3 7/8" 5" 8 72 Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

Dog Up to 6; up to 4 pre-fused 5 1/2" 5" 8 48

Dog Ear Up to 6; up to 4 pre-fused Use scraps

Grapes Up to 6; up to 4 pre-fused 2 1/2" 2 1/2" 16 168

Large Leaf Up to 6; up to 4 pre-fused 4 1/2" 3 1/2" 8 80

Small Leaf Up to 6; up to 4 pre-fused 3" 2 1/2" 16 192

Spider Up to 6; up to 4 pre-fused 4" 5" 8 72

Ghost Up to 6; up to 4 pre-fused 3 5/8" 5" 8 64

Hat Up to 6; up to 4 pre-fused 5" 4 1/2" 8 56

7 7/8" Flower Up to 6; up to 4 pre-fused 8 1/2" 8 1/2" 5 20

5 3/4" Circle Up to 6; up to 4 pre-fused 6 1/4" 6 1/4" 6 36

3 7/8" Star Up to 6; up to 4 pre-fused 4 1/2" 4 1/2" 10 80

3 3/4" Curved Diamond Up to 6; up to 4 pre-fused 4 3/8" 4 3/8" 10 90

2 1/4" x 2 3/8" Triangle Up to 6; up to 4 pre-fused 3 1/2" 6 1/2" 13 160

1 1/4" x 1 1/2" Leaf Up to 6; up to 4 pre-fused Use scraps

2" Heart Up to 6; up to 4 pre-fused 3" 3" 13 156

GO! Gingham Dog (55064)

GO! Halloween Medley (55192)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Harrison Rose by Eleanor Burns (55403)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Grapes of Wrath by Alex Anderson (55370)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

©2020 AccuQuilt Page 39 of 52 Updated 08/18/2020 Code QQJ29

Page 40: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

3" Heart Up to 6; up to 4 pre-fused 4" 4" 10 90

4" Heart Up to 6; up to 4 pre-fused 5" 5" 8 56

3 1/2" Teardrop Up to 6; up to 4 pre-fused 4 1/2" 2 1/2" 16 128

3 1/4" Teardrop Up to 6; up to 4 pre-fused 4 1/2" 2 1/2" 16 128

4" Feather Up to 6; up to 4 pre-fused 5" 3 1/2" 12 84

4 1/4' Feather Up to 6; up to 4 pre-fused 5" 4 1/2" 9 63

4 1/2" Feather Up to 6; up to 4 pre-fused 3" 5 1/2" 16 112

3 3/8" Feather Up to 6; up to 4 pre-fused 3" 4 1/2" 16 128

4" Curl Up to 6; up to 4 pre-fused 5" 3 1/2" 16 84

Large Heart Up to 6; up to 4 pre-fused 4 1/2" 4 1/2" 9 72

Small Heart Up to 6; up to 4 pre-fused 3" 2 1/2" 16 192

3 1/2" Feather Up to 6; up to 4 pre-fused 4 1/2" 2 1/2" 16 128

2 1/4" Feather Up to 6; up to 4 pre-fused 2" 3 1/4" 12 216

2 3/16" Up to 6; up to 4 pre-fused 3" 3 1/2" 12 144

4 1/2" Feather Up to 6; up to 4 pre-fused 4" 5 1/2" 7 63

3 1/2" Comma Up to 6; up to 4 pre-fused 4 1/2" 3" 13 104

2 5/8" Feather Up to 6; up to 4 pre-fused 2 1/4" 3 1/2" 12 192

2 3/16" Up to 6; up to 4 pre-fused 3" 2 1/2" 16 192

GO! Heather Feather #1 by Sarah Vedeler (55087)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Heart-2", 3", 4" (55029)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Heather Feather #2 by Sarah Vedeler (55088)

©2020 AccuQuilt Page 40 of 52 Updated 08/18/2020 Code QQJ29

Page 41: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

1 9/16" Feather Up to 6; up to 4 pre-fused Use scraps

1 5/16" Feather Up to 6; up to 4 pre-fused Use scraps

1 3/4" Feather Up to 6; up to 4 pre-fused Use scraps

1 3/8" Feather Up to 6; up to 4 pre-fused Use scraps

Bow Up to 6; up to 4 pre-fused 4" 4 1/4" 10 81 or more

Scarf Up to 6; up to 4 pre-fused 3" 3" 14 168 or more

Snow Hat Up to 6; up to 4 pre-fused 3" 2 1/4" 17 204 or more

Top Hat Up to 6; up to 4 pre-fused 3" 2 1/2" 21 273

Mitten Up to 6; up to 4 pre-fused Use scraps

Carrot Nose Up to 6; up to 4 pre-fused Use scraps

Stick Arm Up to 6; up to 4 pre-fused 4" 2 1/2" 16 144

Button Up to 6; up to 4 pre-fused Use scraps

Large Ornament Topper Up to 6; up to 4 pre-fused Use scraps

Small Ornament Topper Up to 6; up to 4 pre-fused Use scraps

Holly Leaf Up to 6; up to 4 pre-fused 4" 3" 13 117

Tree Up to 6; up to 4 pre-fused 6" 5 1/2" 7 42

Snowflake Up to 6; up to 4 pre-fused 6" 5 1/2" 7 42

GO! Holiday Medley (55043)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Holiday Accessories (55321)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

©2020 AccuQuilt Page 41 of 52 Updated 08/18/2020 Code QQJ29

Page 42: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Berries Up to 6; up to 4 pre-fused Use scraps

House Up to 6; up to 4 pre-fused 5" 4 1/2" 9 63

Roof Up to 6; up to 4 pre-fused 5" 3 3/4" 10 70

Misc Shapes Up to 6; up to 4 pre-fused Use scraps

Letter "J" Up to 6; up to 4 pre-fused 5" 3 1/2" 12 84

Letter "O" Up to 6; up to 4 pre-fused 5" 4" 10 70

Letter "Y" Up to 6; up to 4 pre-fused 5" 3" 14 98

GO! Leaping Frog (55199) Leaping Frog Up to 6; up to

4 pre-fused 5" 5 1/2" 7 49Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs. Includes Free Embroidery Design download.

Letter "L" Up to 6; up to 4 pre-fused 5" 3 1/2" 12 84

Letter "O" Up to 6; up to 4 pre-fused 5" 4" 10 70

Letter "V" Up to 6; up to 4 pre-fused 5" 4 1/2" 9 63

Letter "E" Up to 6; up to 4 pre-fused 5" 4 1/2" 9 63

Sheep Body Up to 6; up to 4 pre-fused 5 1/2" 4" 10 or more 60 or more

Rattle Up to 6; up to 4 pre-fused 6" 3 1/2" 11 or more 66 or more

Accent Shapes Up to 6; up to 4 pre-fused Use scraps

Treble Clef Up to 6; up to 4 pre-fused 6" 2 1/2" 16 96

Quarter Note Up to 6; up to 4 pre-fused 3 1/2" 2" 20 200

GO! Home by Stacy Michell (55379)

GO! Music Medley

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Love by Sarah Vedeler (55306)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Lullaby (55038)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Joy by Sarah Vedeler (55307)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

©2020 AccuQuilt Page 42 of 52 Updated 08/18/2020 Code QQJ29

Page 43: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Eighth Note Up to 6; up to 4 pre-fused 3 1/2" 2 1/2" 16 160

Single Bar Note Up to 6; up to 4 pre-fused 4 3 1/2" 11 99

Ship's Wheel Up to 6; up to 4 pre-fused 4 1/2" 4 1/2" 8 64

Anchor Up to 6; up to 4 pre-fused 3 7/8" 4 3/8" 9 81

Sailboat Up to 6; up to 4 pre-fused 4 1/4" 4 1/2" 8 64

Bear Up to 6; up to 4 pre-fused 3 1/2" 5 1/4" 7 70

Tree Up to 6; up to 4 pre-fused 2 1/2" 5 1/2" 7 98

Moose Up to 6; up to 4 pre-fused 5" 5" 8 56

GO! Orange Peel-4 1/2" (55455) Orange Peel Up to 6; up to

4 pre-fused 5" 5" 8 56Apply fusible web backing prior to cutting. Coordinates with GO! Square-5" (55010) or pre-cut 5" squares. Four units sewed together make 9" finished blocks.

Hat and Shoe Up to 6; up to 4 pre-fused 6" 5" 8 48

Pants and Suspender Strap

Up to 6; up to 4 pre-fused 4 1/2" 3 1/2" 11 88

Shirt and Sleeve Up to 6; up to 4 pre-fused 5 1/2" 2 1/4" 17 102

Hand Up to 6; up to 4 pre-fused Use scraps

Body Up to 6; up to 4 pre-fused 4 3/4" 4 1/4" 8 64

Eyes Up to 6; up to 4 pre-fused 2" 2" 20 360

Wings Up to 6; up to 4 pre-fused 1" 2" 40 720

Beak & Eye Pupils Up to 6; up to 4 pre-fused Use scraps

Base Up to 6; up to 4 pre-fused 3" 3 1/2" 11 132

(55482)

GO! Overall Sam (55062)

fabric up and cut. Includes Free Embroidery Design download.

GO! Northwoods Medley (55483)

GO! Nautical Medley (55497)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut.

Includes Free Embroidery Design download.

GO! Owl (55333) Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs. Includes Free Embroidery Design download.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

©2020 AccuQuilt Page 43 of 52 Updated 08/18/2020 Code QQJ29

Page 44: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Feathers Up to 6; up to 4 pre-fused Use scraps

Feet Up to 6; up to 4 pre-fused Use scraps

Flowers Up to 6; up to 4 pre-fused 2 1/2" 2 1/2" 16 224

Heart Up to 6; up to 4 pre-fused 2 1/2" 2" 20 280

Stem Up to 6; up to 4 pre-fused

2" x 6 1/2" Rectangle 6 108

Letter "P" Up to 6; up to 4 pre-fused 5" 3 1/2" 12 84

Letter "E" Up to 6; up to 4 pre-fused 5" 4 1/2" 9 63

Letter "A" Up to 6; up to 4 pre-fused 5" 4 1/2" 9 63

Letter "C" Up to 6; up to 4 pre-fused 5" 3 1/2" 9 63

Large Circle Up to 6; up to 4 pre-fused 4" 4" 10 90

Small Circle Up to 6; up to 4 pre-fused 3" 3" 13 156

Large Cat's Eye Up to 6; up to 4 pre-fused 3" 3" 13 156

Small Cat's Eye Up to 6; up to 4 pre-fused 3" 2 1/2" 13 40

Large Leaf Up to 6; up to 4 pre-fused 4 1/2" 1 1/2" 26 208

Small Leaf Up to 6; up to 4 pre-fused 3 1/2" 1 1/2" 26 260

Short Pumpkin Up to 6; up to 4 pre-fused 3" 4" 10 120

Wide Pumpkin Up to 6; up to 4 pre-fused 4 1/2" 4 1/2" 8 64

GO! Owl Accessories (55863) Apply fusible web backing prior to cutting. Place on die and cut.

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Peace by Sarah Vedeler (55305)

GO! Pomegranate by Alex Anderson (55371)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Pumpkins (55323)

©2020 AccuQuilt Page 44 of 52 Updated 08/18/2020 Code QQJ29

Page 45: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Tall Pumpkin Up to 6; up to 4 pre-fused 5 1/2" 4" 10 60

4" Heart Up to 6; up to 4 pre-fused 3 1/2" 4 1/2" 11 88

3 15/16" Heart Up to 6; up to 4 pre-fused 4 1/2" 3 1/2" 8 80

2 5/8" Heart Up to 6; up to 4 pre-fused 3" 2 1/2" 16 176

1 7/16" Heart Up to 6; up to 4 pre-fused 2" 2/12" 20 280

GO! Reindeer (55353) Reindeer Up to 6; up to 4 pre-fused 5" 5 1/2" 8 56 Apply fusible web backing prior to cutting. Place on die with right side of

fabric down and cut. Place fabric on die right sides together to cut pairs.

Oak Leaf Up to 6; up to 4 pre-fused 4 1/4" 4 1/4" 9 72

Curved Square Up to 6; up to 4 pre-fused 4 1/2" 4 1/2" 8 64

Arc Up to 6; up to 4 pre-fused 2 1/4" 4 1/2" 8 128

Heart Up to 6; up to 4 pre-fused 2 1/2" 3" 13 182

3" Rose Up to 6; up to 4 pre-fused 3 1/2" 3 1/2" 11 110

2 1/2" Rose Up to 6; up to 4 pre-fused 3" 3" 13 156

2" Rose Up to 6; up to 4 pre-fused 2 1/2" 2 1/2" 16 224

1 1/2" Rose Up to 6; up to 4 pre-fused Use scraps

1" Rose Up to 6; up to 4 pre-fused Use scraps

1" Circle Up to 6; up to 4 pre-fused Use scraps

GO! Queen of Hearts (55325)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Rose of Sharon #1 by Sharon Pederson (55045)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Ring of Oak by Stacy Michell (55378)

©2020 AccuQuilt Page 45 of 52 Updated 08/18/2020 Code QQJ29

Page 46: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

3/4" Circle Up to 6; up to 4 pre-fused Use scraps

1/2" Circle Up to 6; up to 4 pre-fused Use scraps

2 1/2" Leaf Up to 6; up to 4 pre-fused Use scraps

1 1/2" Leaf Up to 6; up to 4 pre-fused Use scraps

5" Rose Up to 6; up to 4 pre-fused 5 1/2" 5 1/2" 7 42

4 1/2" Rose Up to 6; up to 4 pre-fused 5" 5" 8 56

4" Rose Up to 6; up to 4 pre-fused 4 1/2" 4 1/2" 8 64

3 1/2" Rose Up to 6; up to 4 pre-fused 4" 4" 10 90

Leaves and Circle Up to 6; up to 4 pre-fused Use scraps

Flower Up to 6; up to 4 pre-fused 4 1/4" 4 1/4" 9 72

Star Up to 6; up to 4 pre-fused 3" 3" 13 156

Stem Up to 6; up to 4 pre-fused 7" 1 1/4" 32 or more 160 or more

Leaf Up to 6; up to 4 pre-fused 4" 2" 20 180

1" Circle Up to 6; up to 4 pre-fused 2" 2" 20 360

5/8" Circle Up to 6; up to 4 pre-fused 1 1/2" 1 1/2" 26 624

Sweetgum Leaf Up to 6; up to 4 pre-fused 4 5 1/2" 8 48

GO! Rustling Leaves

GO! Round Flower (55007)

GO! Rose of Sharon #2 by Sharon Pederson (55382)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of ©2020 AccuQuilt Page 46 of 52 Updated 08/18/2020 Code QQJ29

Page 47: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Poplar Leaf Up to 6; up to 4 pre-fused 5 4 1/2" 10 70

Maple Leaf Up to 6; up to 4 pre-fused 4 1/2" 4 1/2" 10 70

Oak Leaf Up to 6; up to 4 pre-fused 5 1/2" 4 1/2" 7 56

Sweetgum Leaf Up to 6; up to 4 pre-fused 4 4 10 90

Poplar Leaf Up to 6; up to 4 pre-fused 4 4 10 90

Maple Leaf Up to 6; up to 4 pre-fused 4 4 10 90

Oak Leaf Up to 6; up to 4 pre-fused 4 4 10 90

GO! Schoolhouse (55344) Schoolhouse Up to 6; up to

4 pre-fused 9" 8 1/2" 4 16 Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Scottie Dog (55224) Dog Up to 6; up to

4 pre-fused 5" 5" 8 56 Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Crab Up to 6; up to 4 pre-fused 5 1/4" 3 5/8" 11 66

Fish Up to 6; up to 4 pre-fused 4 1/2" 3 1/2" 11 88

Starfish Up to 6; up to 4 pre-fused 3 1/2" 3 1/2" 11 110

Seahorse Up to 6; up to 4 pre-fused 3" 5 1/4" 7 78

Eye/Circle Up to 6; up to 4 pre-fused Use scraps

Cut Shapes with 2 1/2" Strips

Up to 6; up to 4 pre-fused 11 1/4" 2 1/2" 3 of each

shape 18 of each shape

Cut Shapes with Scraps Up to 6; up to 4 pre-fused Use scraps

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Rustling Leaves #4 (55392)

#1 (55389)

GO! Rustling Leaves #2 (55390)

fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Designed to use 2 1/2" strips. Cut and fuse 2 1/2" strips across the width of fabric (or use precut strips). Fan fold up to 4 layers over the shapes on the left and right side of the die board. Cut 3 of each shape across the width of fabric. One yard of 40" wide fabric cuts 18 of each shape.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Simple Shapes by Edyta Sitar (55177)

GO! Rustling Leaves #3 (55391)

GO! Sea Life Medley (55190)

©2020 AccuQuilt Page 47 of 52 Updated 08/18/2020 Code QQJ29

Page 48: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Reindeer Up to 6; up to 4 pre-fused 6" 6 30

Sleigh Up to 6; up to 4 pre-fused 6 1/2" 5" 8 40

Large Snowflake Up to 6; up to 4 pre-fused 4 1/2" 5" 8 64

Small Snowflake Up to 6; up to 4 pre-fused 4 1/2" 5" 8 64

Arched Roof Up to 6; up to 4 pre-fused 4" 3" 13 117

Triangular Roof Up to 6; up to 4 pre-fused 4" 2 1/2" 11 154

Cupcake Roof Up to 6; up to 4 pre-fused 4" 2 1/2" 11 154

Scalloped Roof Up to 6; up to 4 pre-fused 4" 2 1/2" 11 154

Curved Top Base Up to 6; up to 4 pre-fused 3 1/4" 3 1/4" 12 132

Rectangle Base Up to 6; up to 4 pre-fused 3 1/4" 2 1/2" 12 168

Angled Chimney Up to 6; up to 4 pre-fused Use scraps

Chimney/Window Up to 6; up to 4 pre-fused Use scraps

GO! Snowflake (55359) Snowflake Up to 6; up to 4 pre-fused 4 1/2" 5" 8 64 Apply fusible web backing prior to cutting. Place on die with right side of

fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Snowflakes-7" (55450) Snowflakes Up to 6; up to

4 pre-fused 7 1/2" 7 1/2" 5 20 Apply fusible web backing prior to cutting.

Small Diamonds Up to 6; up to 4 pre-fused 6 1/2" 3" 78 or more 390 or more

Medium Diamonds Up to 6; up to 4 pre-fused 11" 2 1/2" 64 192

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Small Houses by Reiko Kato (55387)

GO! Sleigh & Snowflakes (55322)

GO! Sparkle-Diamonds by Sarah Vedeler (55089)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

©2020 AccuQuilt Page 48 of 52 Updated 08/18/2020 Code QQJ29

Page 49: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Large Diamonds Up to 6; up to 4 pre-fused 8" 4" 10 40

Concave Triangles Up to 6; up to 4 pre-fused 5 1/2" 3" 52 312

Convex Triangles Up to 6; up to 4 pre-fused 5 1/2" 3 1/2" 44 264

Large Tree: Top Half (4 pieces)

Up to 6; up to 4 pre-fused 4" 10" 4 36

Large Tree: Bottom Half (2 pieces)

Up to 6; up to 4 pre-fused 5" 5" 8 56

Small Tree (6 pieces) Up to 6; up to 4 pre-fused 3" 8 5 60

12 Pointed Star Up to 6; up to 4 pre-fused 5" 6" 6 42

6 Pointed Star Up to 6; up to 4 pre-fused 5" 6" 6 42

Diamond Up to 6; up to 4 pre-fused 5" 10" 4 28

Large Tree Leaf Up to 6; up to 4 pre-fused 5" 6 1/2" 6 42

Small Tree Leaf Up to 6; up to 4 pre-fused 5" 2" 20 140

Star Point Up to 6; up to 4 pre-fused 3 1/4" 1 1/4" 32 352

2" Star Up to 6; up to 4 pre-fused 3" 3" 13 156

3" Star Up to 6; up to 4 pre-fused 4" 4" 10 90

4" Star Up to 6; up to 4 pre-fused 5" 5" 8 56

Medium Star Up to 6; up to 4 pre-fused 5 1/2" 5 1/2" 7 42

GO! Sparkle-Jumbo Tree by Sarah Vedeler (55094)

GO! Sparkle-Snowflakes by Sarah Vedeler (55093)

Apply fusible web backing prior to cutting. Place on die with right side of

GO! Sparkle-Tree by Sarah Vedeler (55095)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

GO! Star-2", 3", 4" (55028)

GO! Sparkle-Slim Tree by Sarah Vedeler (55096)

(55089)

GO! Star Medley-5 Point by Sarah Vedeler

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

©2020 AccuQuilt Page 49 of 52 Updated 08/18/2020 Code QQJ29

Page 50: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Small Star Up to 6; up to 4 pre-fused 4" 4" 10 90

Medium Star Up to 6; up to 4 pre-fused 6" 5" 8 48

Small Star Up to 6; up to 4 pre-fused 4 1/2" 4" 10 80

6 Point Star Petal Up to 6; up to 4 pre-fused 5" 3" 13 91

5 Point Star Petal Up to 6; up to 4 pre-fused 5" 3 1/2" 11 77

GO! Star-5 Point by Sarah Vedeler (55310) Star Up to 6; up to

4 pre-fused 10" 10" 4 12 or more Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Star-6 Point by Sarah Vedeler (55312) Star Up to 6; up to

4 pre-fused 8 1/2" 10" 4 16 Layer fabric all wrong sides up or down to cut design in the same direction. Place fabric on die right sides together to cut pairs.

8 Point Star Petal Up to 6; up to 4 pre-fused 2" 5" 8 144

Medium Star Up to 6; up to 4 pre-fused 5 1/2" 5 1/2" 7 42

Small Star Up to 6; up to 4 pre-fused 3 1/2" 3 1/2" 11 110

Stems Up to 6; up to 4 pre-fused 10 1/2" 4" 10 of each

stem 33 of each stem

Leaves Up to 6; up to 4 pre-fused 10 1/2" 2 1/2" 16 of each leaf 51 of each leaf

Sandal Up to 6; up to 4 pre-fused 5 2 1/4" 17 119

Sandal Strap Up to 6; up to 4 pre-fused 2 1/8" 2 3/4" 14 224

Bucket Up to 6; up to 4 pre-fused 4 4 1/4" 9 81

Bucket Handle Up to 6; up to 4 pre-fused 3 3/4" 2 1/2" 16 144

GO! Summer Medley (55496)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

fabric up and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Star-8 Point by Sarah Vedeler (55315)

Point by Sarah Vedeler (55311)

GO! Star Medley-6 Point by Sarah Vedeler (55313)

GO! Stems & Leaves (55331)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

GO! Star Points by Sarah Vedeler (55314)

©2020 AccuQuilt Page 50 of 52 Updated 08/18/2020 Code QQJ29

Page 51: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Shovel Up to 6; up to 4 pre-fused 2 1/2" 4 1/2" 8 112

Bonnet, Sleeve and Shoe

Up to 6; up to 4 pre-fused 5 1/2" 5 1/2" 7 42

Dress Up to 6; up to 4 pre-fused 6" 4 1/2" 8 48

Hand Up to 6; up to 4 pre-fused Use scraps

Engine Up to 6; up to 4 pre-fused 6 1/8" 4 3/4" 8 40

Coal Car Up to 6; up to 4 pre-fused 5 1/4" 4 3/4" 7 49

Tanker Up to 6; up to 4 pre-fused 6 1/8" 4 5/8" 8 40

Caboose Up to 6; up to 4 pre-fused 6 1/8" 4 3/4" 7 35

1 1/4" Circle Up to 6; up to 4 pre-fused Use scraps

1 13/16" Circle Up to 6; up to 4 pre-fused Use scraps

Window Up to 6; up to 4 pre-fused 2" 2" 20 360

Pointed Tree Top Up to 6; up to 4 pre-fused 4 1/2" 3 1/2" 11 88

Tree Top Up to 6; up to 4 pre-fused 3" 3" 13 156

Pine Tree Top Up to 6; up to 4 pre-fused 4 3" 13 117

Tree Base Up to 6; up to 4 pre-fused Use scraps

Tree Base Up to 6; up to 4 pre-fused Use scraps

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.GO! Train (55367)

GO! Sunbonnet Sue (55061)

GO! Trees by Reiko Kato (55388)

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

©2020 AccuQuilt Page 51 of 52 Updated 08/18/2020 Code QQJ29

Page 52: How to Die Cut GO! Shapes Fabric Reference Chart · Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed. *Recommended

Die Name (Item #) Shape on DieLayers of

Cotton Fabric *

Pre-Cut Strip Size (width of

fabric)

Fan Folded Size

Cuts Per Pre-Cut Strip

Minimum Shapes Yielded Per 42-

44" yard of FabricHelpful Hints

Use this chart to determine the minimum fabric requirements needed to cut each GO!® fabric cutting die shape listed.

*Recommended layers of fabric are based on 100% cotton fabric. Number of layers of fabric varies by fabric type and thickness. Always begin with fewer layers and build up.

Call 888.258.7913 or visit accuquilt.comFabric Reference ChartHow to Die Cut GO! Shapes

Outside Petal Up to 6; up to 4 pre-fused 4" 6" 12 or more 108 or more

Inside Petal Up to 6; up to 4 pre-fused 2" 5" 8 144

Horse Up to 6; up to 4 pre-fused 5 3/4" 5" 8 42

Horseshoe Up to 6; up to 4 pre-fused 3 5/8" 4 1/4" 9 63

Cowboy Boot Up to 6; up to 4 pre-fused 4 1/8" 4 5/8" 8 64

Giraffe Up to 6; up to 4 pre-fused 7 1/2" 6" 7 28

Monkey Up to 6; up to 4 pre-fused 4" 4" 10 90

Lion Up to 6; up to 4 pre-fused 6" 5 1/4" 7 42

Lion Face Up to 6; up to 4 pre-fused 3" 3" 13 168

Lion Nose Up to 6; up to 4 pre-fused Use scraps

Monkey Face Up to 6; up to 4 pre-fused 2" 2" 21 378

Monkey Mouth Up to 6; up to 4 pre-fused Use scraps

GO! Tulip (55328)

Western Medley (55227)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides

together to cut pairs.

GO! Zoo Animals (55369)

Apply fusible web backing prior to cutting. Place on die with right side of fabric down and cut. Place fabric on die right sides together to cut pairs.

Apply fusible web backing prior to cutting. Place on die with right side of fabric up and cut. Place fabric on die right sides together to cut pairs.

©2020 AccuQuilt Page 52 of 52 Updated 08/18/2020 Code QQJ29