How to Copy Psx Games Instructions

download How to Copy Psx Games Instructions

of 5

Transcript of How to Copy Psx Games Instructions

  • 7/31/2019 How to Copy Psx Games Instructions

    1/5

    HOW TO COPY PSX GAMES (AnGeLk][LLa)|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|----------------------------------

    There are two ways of copying games.

    WAY 1. Turn them into a .bin/.cue or an .iso and then burn them to a CDWAY 2. Copy CD to CD

    I recommend doing #2 because its easier and takes less time. If youplan to store the PSX game on your Hard Drive. Then do #1. I willexplain how to do both on different types of programs:

    -----------WAY #1-----------I sudgest using CDRWIN for this way of copying a PSX game.

    CDRWIN>>1. Open CDRWIN2. Select the following options- Check "Disc Image/Cuesheet"- Under "CD Reader" Choose the CD Reader to be used- Under "Image Filename" select the place to put the game. For example,

    I did C:\PsxGamez\- Select the tracks under "Track Selection" (most games have only 1)

    +++++Everything else that I havn't mentioned should be left DEFAULT++++

    ---------WAY #2---------Backup InstructionsIntroductionThe following CD-Writer software is capable of making a working backup of an original Playstation CD.PC Software:

    CDRWINCD WizardDiscJugglerNero Burning RomWinOnCDMacintosh Software:

    CD-Copy & ToastAmiga Software:

    MakeCDInformation where to get this software can be found at CD Media World.

    NOTE: Keep in mind that an ModChip or a Game-Enhancer is ALWAYS needed to be able to play these CD-R'sIn some cases it is better to use the CD-Writer as Source CD-Reader as it is usually better able to read unreadable sectors.

    All backup instructions will first make an CD Image on the local harddisk and after that burn the CD. It is also possible to perform an On-the-Fly backup but this depends on the quality of the CD-Reader.

  • 7/31/2019 How to Copy Psx Games Instructions

    2/5

    Always make sure that there is enough disk-space to store the CD-Image (some CD-images can be 700 Mb in size!).

    CDRWIN GoldenHawkBackup Instructions:Start CDRWIN (3.5 or higher).In the CDRWIN - CDROM Recording Tools window click Backup Disc.In the Backup Disc window change the following settings (all other settings should be left default):MainBackup Mode... Select Copy to Image and RecordDevicesCD Reader Select Source CD-ReaderCD Recorder Select Destination CD-WriterReading OptionsCopy RAW Sectors SelectError Recovery... Select IgnoreJitter Correction... Select AutoSubcode Analisys... Select AutoRead Retry Count 10

    Data Speed 1x (when possible select a faster speed)Audio Speed 1x (when possible select a faster speed)Recording OptionsSpeed 1x (when possible select a faster speed)

    When ready click START to create the imagefile & burn the CD.

    CD Wizard VOB

    Backup Instructions:Start CD Wizard (4.5 or higher).From the Welcome window or from Tool select CD Copy (this will start the MultiCopy program).Select for Source the CD-Reader and for Destination the CD-Writer.Select the No Simulation option.Click the Details button.Use the following settings (all other settings should be left default):Copy TabWrite methode Select Disc at OnceWrite to hard disk first SelectIgnore read errors SelectDevices Tab

    Data read speed 1x (when possible select a faster speed)Audio reed speed 1x (when possible select a faster speed)Write speed 1xDevices TabMode 1 Select Raw Data (2352 Bytes)Mode 2 Select Raw Data (2352 Bytes)

    Click ready click Start to start the copy process.

  • 7/31/2019 How to Copy Psx Games Instructions

    3/5

    DiscJuggler PadusBackup Instructions:Start DiskJuggler (1.05.238 or higher).From the action-bar choose View and select Options.In the Options window select the Verify tab and select the Check data blocks with software generated EDC/ECC... option (if not selected already).In the Options window select the Defaults tab and change the Max image size to 80 min(s) (for v1.05.238) or 85 min(s) (for v1.05.238-TU RADIUM).When ready click [OK].From the action-bar choose File and select New.In the New Task window select CD Player to CD Recorder and click OK.In the Task 1 - CD Player to CD Recorder window select the following settings (all other settings should be left default):Source & Destination TabSource Select Source CD-ReaderDestination Select Destination CD-Writer (if needed)Advanced TabISRC and UPC SelectScan gaps/indexes SelectRaw read/write Select

    Ignore read errors SelectRead speed 1x (when possible select a faster speed)ActionPull-Down menu Select WriteCopies 1MethodeSlower/Faster Select Save the entire contents of the disc in a temporary file and write a 1X.

    When ready click Start to start the copy process.

    Nero Burning Rom AheadBackup Instructions:Start Nero - Burning Rom (4.0.0.5 or higher).From the action-bar choose File and select CD-Copy.Use the following settings (all other settings should be left default):Image TabImage file Enter a Image filenameCopy options TabOn the fly DeSelectDrive with source CD... Select Source CD-Reader

    Read Speed 1x (150 kB/s)Read options TabNumber of retries before read error 10Read media catalog number and ISCR SelectIgnore illegal TOC Type SelectUnreadable data Continue copyingData mode 1 - Force raw reading- If it can be changed or it is not ghosted SelectData mode 1 - On errors... write uncorrectedData mode 2 - Force raw reading Select

  • 7/31/2019 How to Copy Psx Games Instructions

    4/5

    Data mode 2 - On errors... write uncorrectedRead audio data with sub channel SelectUse Jitter correction Select (for older Readers)Ignore read errors SelectBurn TabWrite Speed 1x (150 KB/s)

    When ready click Copy CD to start the copy process.

    WinOnCD CeQuadratBackup Instructions:Start WinOnCD (3.6 or highter).In the New Project window click Copy and click OK.In the CD-Copy window select the following settings (all other settings should be left default):FixationClose CD Selected (can't be changed)Test WriteWrite Immediately Select

    OutputSpeed 1x (when possible select a faster speed)Write modeDisc/Session at once SelectUnreadable data Continue copyingOn the flyWrite 'on the fly' if possible DeSelect

    When ready click Record to start the copy process.

    CD-Copy & Toast Astarte & AdaptecBackup Instructions:Start Astarte CD-Copy (2.0 or higher).From the Edit menu select Select All.From the File menu select Save.Now select a temporary destination folder to store the tracks.Wait for the tracks copy to complete, when ready quit Astarte CD-Copy.Start Adaptec Toast (3.5.5 or highter).From the Format menu select: Multitrack CD-ROM XAIn the Adaptec Toast window click the Data button.in the CD-ROM XA Tracks window click Add to add all tracks which are in the temp

    orary folder. Keep in mind that the track order is VERY important, Track 01 (Data track) should ALWAYS be on top of the list then the Audio Track 02, 03... tracks should follow (if there are any).When ready click OK.Click Write CD... and set the write speed to 1x.When ready click Write Disc... to start the copy process.

    NOTE: The Macintosh Backup Instructions have not been verified yet as we don't have a Macintosh laying around, so if this works for you let me know!SOURCE: Backing Up Your PSX Games On Your Macintosh

  • 7/31/2019 How to Copy Psx Games Instructions

    5/5

    MakeCD MakeCDBackup Instructions:Start MakeCD (3.2 or higher).Select the menu item Tools - Copy CD...In the MakeCD: CD-Copy window change the following settings (all other settingsshould be left default):OptionsBase dir Enter/Select a CD-Image DirectoryTemporary Images Use image fileAudio file format CDDA (= only data, no header)Delete file Immediately or NeverWrite Mode Disc-at-OnceData Format Format of the WriterScan for indices CheckedRead ISRCs Checked

    When ready click Copy CD... to read the CD info.NOTE: If you are backing up a multiple track PSX CD and you are not sure whether

    the format of your writer is "raw block contents" or "cooked user data" make sure that the Data Format is set to Raw Block Contents.When the CD-Writer does not support this mode by default, it will take a fair amount of CPU power as MakeCD has to emulate this mode internally.

    Now the CD information is gathered. This may take some time to complete!In the MakeCD: write window change Write mode (DAO) to Test mode off and changeFix to CD-R.When ready click Start to create the imagefile & burn the CD.NOTE: It is also possible to set the Write mode (DAO) to Test mode on, when theTest burn is finished change it to Test mode off and press Start to brun the CD-R for real.

    SOURCE: MakeCD Backup Guide