How to code with ec2 (ver 1.0)

How to coding with EC2

EC2 coding software download link

At USD1.00 per license

(reimbursable for distributor)

This QR code is a free version, an advertisement will appear

for about 5 seconds before you are taken to the download page

What is coding ?• Coding means the manual process of associating audio

files (MP3) to specific area of a page

What does it do ?• It tells the smart reader of which MP3 file to play back

from a specific area of a page

How big is a code ?• A single code is 2.53mm2 big• To play back the same MP3 in a bigger area, simply mark a

bigger area with the same code; effectively repeating the same code all over that area

2http://edmall.hkedcity.net/EdStore/ycaa.html

What do you need ?

The markup plan The MP3 audio files The clean copy used in EC2

Before you begin, you need to prepare 3 things:1) A clean copy of pages in digital format (either in PDF, JPEG, PNG, BMP)2) The audio files in MP3 format3) The markup copy of the page (this is optional if each page only have 1 or a few codes)


Get the software (EC2) up and running

1. Use the QR code on the front page to download the software, you are required to pay USD1.00 for download, but this will be refunded from your purchase order

2. The software is called EC2, it does not require installation; just make a new copy of it for each project

3. The first time you run it, a file named “send.to.ask.for.serial.no.now” will be generated, email this to [email protected]. I will email to you the license key “OidProducer.serial.no”

4. Put the license key in the same directory of EC2 and run it again

5. Each license enables one computer to use the software, repeat step 1 – 4 again for another computer


mailto:[email protected]

Run EC2

You will see this page once you launch EC2

Click this to define you project


Defining your project

2) Name the project here, it will also be the name of PDF file you get from the final step

1) Click this


Defining your project (cont.)

3) Click this

4) Name the audio file, this will be the audio file to put into the smart reader



4) Define the number of language channel you have. Up to 10 languages can be played back from the same spot of a page; it works like a TV screen can display programs from different channels

This brings you to the folder where all the system audio is saved. You can replace them with your version, just keep the same file names.

5) Book number is used to separate one project from another if both projects use the same set of code number with different audio file (a crash will happen). It is not mandatory if you will do all your content in a single project and the same code number will not be assigned to more than 1 audio file

6) Define your code range here. Do not overlap code ranges unless you use book number to separate projects from one another

7) This range of codes are used for recording stickers. Again , do not overlap them or your recording will be accidentally overwritten

8

http://edmall.hkedcity.net/EdStore/ycaa.html


EC2 has 3 gaming design function, each game or exercise take up one game code which is defined in this page. Do not overlap games code unless you use book ID to separate projects from one another

Use one code for each game and leave this area blank if you do not have game in the project


Set up 3rd parties software to work with EC2

8) You can specify any drawing and image editing software installed in your PC to edit the image file during the coding process.9) Same for sound editing software in your PC.

This is optional. Focus object is a small white color speech bubble clipart automatically added to each coded area. It is useful when the background of the page is black or dark color since dark background color will render the reader insensitive . Adding a white speech bubble can remedy this problem


Demonstration


Step 1 (Mark up the hard copy)To plan the area on the page and assign a code to each area


Step 2 (Prepare the audio)To rip the audio from CD, separate it into individual clips and name them according to their corresponding code number

Free software

Free software 13http://edmall.hkedcity.net/EdStore/ycaa.html

Step 3 (Run EC2)Launch the software by double clicking it


Step 3 (Run EC2) - ContName and set up the project parameters

2) Name the project here, it will also be the name of PDF file you get from the final step

1) Click this


Step 3 (Run EC2) - ContName and set up the project parameters

3) Click this

4) Name the audio file, this will be the audio file to put into the smart reader


Step 3 (Run EC2) - Cont

4) Define the number of language channel you have. Up to 10 languages can be played back from the same spot of a page; it works like a TV screen can display programs from different channels

This brings you to the folder where all the system audio is saved. You can replace them with your version, just keep the same file names.

5) Book number is used to separate one project from another if both projects use the same set of code number with different audio file (a crash will happen). It is not mandatory if you will do all your content in a single project and the same code number will not be assigned to more than 1 audio file

6) Define your code range here. Do not overlap code ranges unless you use book number to separate projects from one another

7) This range of codes are used for recording stickers. Again , do not overlap them or your recording will be accidentally overwritten


Step 3 (Run EC2) - ContDrag and drop the pages (JPEG) into EC2


Step 3 (Run EC2) - ContMark the area according to the “Mark Up copy”


Step 3 (Run EC2) - ContLinking audio – by dragging and dropping


Step 3 (Run EC2) - ContLinking audio – by auto-linking

1) Double click any object

2) Click “IdFile folder”will open up this folder


Step 3 (Run EC2) - ContLinking audio – by auto-linking

4) Click “OK”

3) Copy all the individual audio files into this idFilefolder

id

id

id

idAn will appear at the upper right hand corner indicating that an audio has been linked successfully


Step 4 (Testing)Run simulator to test your project

26http://edmall.hkedcity.net/EdStore/ycaa.ht

ml

Step 4 (Testing) - ContRun simulator to test your project

Tick this box only, leave other boxes untick

Hit this to proceed

27


Step 4 (Testing) - ContRun simulator to test your project

Click this link to run simulator

28


Step 5 (Output for printing)To generate the file for printing (pdf, tif, single page, multiple)


Step 5 (Output for printing) - ContTo generate the file for printing (pdf, tif, single page, multiple)

This section is important when you want to print with photocopier, laser printer or inkjet printers

“focus object” is white speech bubble which is useful when your projecta) has black or very deep color background;b) You are printing with digital printer, laser

printer, photocopier, inkjet printer; not by off-set printing 30



PageImage = the graphic and artwork of pagePattern = the code, the tiny little dots

i. Chose “PageImage + Pattern (pdf) multipage” if you want to print with digital printer, laser printer, inkjet printer. (But the dark area will not be sensitive since the dots are mixed up with dark color which makes them not recognizable)

ii. Chose “Pattern (pdf) multipage” if you are printing with traditional offset printing or you print a single page twice; the first time to print the PageImage from original document, second time to print the codes

Click this after you done with all the setting

31



Double click this pdfto print



Magnify to 1200% gives you a clear view of the codes


Move the sound file into reader

Under the folder “Ebook”


Done !


How to code with ec2 (ver 1.0)

Education

Transcript of How to code with ec2 (ver 1.0)