How to Calibrate a Pressure Gauge with a Pressure Comparator or Calibrator Webinar
How to calibrate digital instruments based on IEC...
Transcript of How to calibrate digital instruments based on IEC...
![Page 1: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/1.jpg)
How to calibrate digital instruments basedon IEC 61850-9-2M. Agustoni and A. Mortara
This work is partially funded by the EMRP projectFutureGrid (ENG61). The EMRP is jointly fundedby the EMRP participating countries and theEuropean Union.
![Page 2: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/2.jpg)
Overview
31/8/2016Future Grid Workshop 2016, Braunschweig 2
Introduction: IEC 61850-9-2 digitalinstruments
The Stand Alone Merging Unit (SAMU)Calibration setupMetrological characterization
The “Test Set” (can be used as SAMUcalibrator)
Calibration setupMetrological characterization
![Page 3: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/3.jpg)
Scenario: Power Network Substation
31/8/2016Future Grid Workshop 2016, Braunschweig 3
In modern power network substations, currentand voltage signal are digitized formeasurement and control purposes.
Digitized values and correspondent time-stamps are delivered through the Ethernet asSample Values (SV) as described inIEC 61850-9-2 standard.
The traceability of digital devices based onIEC 61850-9-2 must be established.
![Page 4: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/4.jpg)
The Stand Alone Merging Unit (SAMU)
31/8/2016Future Grid Workshop 2016, Braunschweig 4
Digital communication interface between (non-)conventionalcurrent/voltage sensors and protection devices in switchyard andsubstation control area.
It combines these signals in one device and converts them into digitalstream (IEC 61850-9-2).
SAMU SV IEC 61850-9-2
Calibration notstandardized IEC 61869-13
GPS rec.
PPS
LAN
![Page 5: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/5.jpg)
SAMU Under Test
31/8/2016Future Grid Workshop 2016, Braunschweig 5
Specifications
![Page 6: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/6.jpg)
The Test Bench (Hardware)
31/8/2016Future Grid Workshop 2016, Braunschweig 6
24 bit
![Page 7: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/7.jpg)
The Test Bench (Software)
31/8/2016Future Grid Workshop 2016, Braunschweig 7
LabView® and C/C++ based.
DAC ADC
SAMUSV
decoder
ReferenceGenerator
SV decoder: adapted version of open platform developed byS.M. Blair et al. at the University of Strathclyde.
[S. M. Blair, et al., IEEE Transactions on Power Delivery, vol. 28, no. 2, pp. 1103-1110, 2013]
Recorder
![Page 8: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/8.jpg)
The Test Bench (Software, SV decoder)
31/8/2016Future Grid Workshop 2016, Braunschweig 8
SV decoder consists basically in 2 parts:
1. A packet sniffer intercepts the desired SV stream over thenetwork (MAC destination + MAC source + Ethertype +SV ID).
2. Decoding functions extract the encapsulated digitizedvalues and time-stamps from the rest of Ethernet frame.
MACDestination
MACSource
Ethertype(0x88BA SV) Data
6 bytes 6 bytes 2 bytes Variable
SV ID
![Page 9: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/9.jpg)
The Test Bench (Software, Main Code)
31/8/2016Future Grid Workshop 2016, Braunschweig 9
![Page 10: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/10.jpg)
The Test Bench (Software, Main Code)
31/8/2016Future Grid Workshop 2016, Braunschweig 9
Build signal from file parameters
![Page 11: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/11.jpg)
The Test Bench (Software, Main Code)
31/8/2016Future Grid Workshop 2016, Braunschweig 9
Start SV decoder
![Page 12: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/12.jpg)
The Test Bench (Software, Main Code)
31/8/2016Future Grid Workshop 2016, Braunschweig 9
Generate output analog signal
![Page 13: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/13.jpg)
The Test Bench (Software, Main Code)
31/8/2016Future Grid Workshop 2016, Braunschweig 9
Read reacquired signal
![Page 14: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/14.jpg)
The Test Bench (Software, Main Code)
31/8/2016Future Grid Workshop 2016, Braunschweig 9
Record reacquired and SAMU signal
![Page 15: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/15.jpg)
Metrological Characterization of SAMU
31/8/2016Future Grid Workshop 2016, Braunschweig 10
The measurement bench allows formetrological characterizations in bothtime/frequency and amplitude domain.
Test example:
Frequency stability of clock oscillator.
Sine wave testing.
![Page 16: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/16.jpg)
Frequency Stability
31/8/2016Future Grid Workshop 2016, Braunschweig 11
Single-tone sine wavesignal 50 Hz1h recordDetermination of relativefrequency offsets
[Performed with: Quantum Wave Toolbox: https://qwtb.github.io/qwtb/]
Overlapped AllanDeviation
Relative stability of 0.5nHz/HzSAMU practically doesn’tintroduce additional jitter
Method
Result
Analysis
![Page 17: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/17.jpg)
Sine Wave Testing (Modulo Time Plot)
31/8/2016Future Grid Workshop 2016, Braunschweig 12
Single-tone sine wavesignal 50.0028 HzResampling of 225periods in 1 periodAll codes in consideredvoltage range swept
Sine wave fit, nlsalgorithm with 4 freeparameters
Well defined structuresin residuals
ENOB~11
Method
Result
Analysis
[F. H. Irons and D. M. Hummels, IEEE Transactions on Instrumentation and Measurement,vol. 45, no. 3, pp. 734-738, Jun 1996]
![Page 18: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/18.jpg)
Sine Wave Testing (Residual Spectrum)
31/8/2016Future Grid Workshop 2016, Braunschweig 13
FFT of residuals
First two harmonicsdistortion
First twocomponents of othercontribution at 4 kHz
may be related toclock feedthrough
Harmonics Clock feedthrough
![Page 19: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/19.jpg)
The Test Set
31/8/2016Future Grid Workshop 2016, Braunschweig 14
OMICRON CMC 356
Multifunction calibratorCan be used for SAMU calibration on the field.Provide the simultaneous generation of an analog signaland its digital version according IEC 61850-9-2
![Page 20: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/20.jpg)
Test Set (Test Bench)
31/8/2016Future Grid Workshop 2016, Braunschweig 15
![Page 21: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/21.jpg)
The Test Set (Delay tests)
31/8/2016Future Grid Workshop 2016, Braunschweig 16
Single-tone sine wavesignal 50 Hz100-200 kHz samplingrateMeasurements repeated10 times at sameconditions
Sine wave fit, nlsalgorithm with 4 freeparameters
Mean phase delaybetween -1 and -1.7mrad 3-5 µs
Method
Result
Analysis
[Uncertainties: M. Zeier et al., “Metas.UncLib —a measurement uncertainty calculator for advancedproblems,” Metrologia, vol. 49, no. 6, pp. 809–815, Dec. 2012]
![Page 22: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/22.jpg)
Summary
31/8/2016Future Grid Workshop 2016, Braunschweig 17
A calibration setup for IEC 61850-9-2 devices has beenpresented.
The measurement bench is designed to be robust andversatile.
Software architecture makes possible a wide range ofmeasurement types.
As an example, frequency stability and sine wave tests forSAMU as well as delay measurement for test set have beenpresented.
The forthcoming publication of IEC 61869-13 standard willallow for setting parameters for complete and accuratecalibration for SAMUs.
![Page 23: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/23.jpg)
Acknowledgement
13/7/2016CPEM 2016, Ottawa 18
This work is partially funded by the EMRP project FutureGrid(ENG61). The EMRP is jointly funded by the EMRP participatingcountries and the European Union.
![Page 24: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/24.jpg)
Thank you very much for your attention
![Page 25: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/25.jpg)
Additional Slides
31/8/2016Future Grid Workshop 2016, Braunschweig 19
![Page 26: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/26.jpg)
Why IEC 61850 Standard?
31/8/2016Future Grid Workshop 2016, Braunschweig 20
Problem:Technological improvements in communication andmeasurement system (as non-conventional sensors)Increasing number of software-based substationautomation system
interoperability issues between suppliers of substationdevice equipment
Solution: IEC 61850
Benefits:IEC 61850 is designed to be independent of technologicalchangesIEC 61850 allows to reduce costs for: wiring, commu-nication infrastructure, installation and maintenance,…
![Page 27: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/27.jpg)
IEC 61850-9-2
31/8/2016Future Grid Workshop 2016, Braunschweig 21
• Describes the communication of SVover Ethernet with Multicasttransmission service.
• The standard is very general describedand can be interpreted in different ways
complication in interoperability.
• To meet the requirements of thestandard’s implementation a dedicatedguideline has been introduced.
• The UCA International Users Group’sguideline referred as IEC 61850-9-2LE“Light Edition”.
![Page 28: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/28.jpg)
SV Decoder
31/8/2016Future Grid Workshop 2016, Braunschweig 22
SV ID
Mean packet delay over LAN
![Page 29: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/29.jpg)
Frequency Stability
31/8/2016Future Grid Workshop 2016, Braunschweig 23
Input WF discretized
Relative frequency offset of oscillator
![Page 30: How to calibrate digital instruments based on IEC 61850-9-2futuregrid.emrp.eu/wp-content/uploads/2016/09/06-Agustoni-How-to... · How to calibrate digital instruments based on IEC](https://reader034.fdocuments.net/reader034/viewer/2022051720/5a78b97b7f8b9a83238b8943/html5/thumbnails/30.jpg)
Sine Wave Tests
31/8/2016Future Grid Workshop 2016, Braunschweig 24
Number of codes to see
Fine-scale frequency selectionp= number of periodsS= number of samples nominal freq.fS = sampling rate