How Radiant Barrier Insulation Can Help Keep Metal Roof Buildings Cool & Comfortable
-
Upload
ecosulation -
Category
Engineering
-
view
195 -
download
1
description
Transcript of How Radiant Barrier Insulation Can Help Keep Metal Roof Buildings Cool & Comfortable
RADIANT BARRIER INSULATION
All you need to know about Ecosulation
Table of contents
Radiant barrier 101
•How a radiant barrier prevents infrared radiations from entering a building making the interiors cooler
About Ecosulation
•Know more about the product and its properties
How is it installed?
•How our expert team installs the product with minimum hassle even in a retrofit
Radiant barrier insulation is essentially a sheet
of shiny aluminum that reflects up to 95% of
infrared radiation incident on it
How does radiant barrier insulation work?
Radiant heat transfer from the sun
Infrared radiation from the sun travels through the vacuum of space and reaches the earth.
When radiation strikes matter its energy is converted to heat energy, much like how it feels warm near a room heater or a tandoor.
Read more about how heat is transferred via conduction, convection and radiation
Why it is hot in the sun and cool in the shade
On a hot day
people seek out
the shade of
trees not just
because of the
shade but also
because the
leaves dissipate
infrared rays
preventing them
from reaching
the subject.
However it is not
always cool in
the shade.
It can get hot even in the shade as the roof heats up and starts radiating
Inside a building there is shade but that does not mean it is comfortable.
The roof of any building absorbs infrared radiation and heats up. The hot roof in turn radiates heat to the buildings occupants causing discomfort and heat stress
Ecosulation reflects IR radiations making interiors cooler
Ecosulationradiant barrier insulation is installed below the roof with an air gap.
The mirror like surface of the material reflects up to 95% of the infrared radiations emitted by the roof making the interiors surprisingly cooler.
Read more about how reflective insulation works on our website
Reflective insulation is installed with an air gap to reduce heat transfer via conduction
An air gap of at least one inch is necessary between the roof and the layer of reflective film insulation
While Ecosulationreflects up to 95% of the radiant heat back to the roof, the insulating air gap prevents heat transfer via conduction between the hot roof and the layer of insulation
Ecosulation is not just a shiny surface, it is a
tough yet easily workable material that is
flameproof. Know more about what makes
Ecosulation long lasting and efficient.
More about Ecosulation radiant barrier insulation
Perfect material for every application
The
rma
l, v
ap
or
an
d d
ust
ba
rrie
r
•Thermal insulation material with very low emissivity
•Prevents moisture seepage
•Prevents passage of dust
Tou
gh
an
d d
ura
ble
. Fla
me
re
sist
an
t. •Heavy duty and tear resistant multilayer structure
•Lightweight but strong
•Flame resistant and non smoke forming
•Non toxic
Ha
ssle
fre
e in
sta
llatio
n •No need to disrupt factory operations
•No modification required to setup
•Self supporting lengths of up to 1200 mm
De
sira
ble
pro
pe
rtie
s
•Does not promote growth of fungus
•Does not provide nesting place for birds and rodents
•Enhances building lighting
Read more about the product, its benefits and applications
Technical specifications
Low emissivity so reflects up to 95% of incident IR radiations
• Less than 0.05 (Testing method ASTM E408-71)
High tensile strength
•M.D 99.3 lb/inch C.D 57.5 lb/inch (Testing method ASTM C1136-08)
Flame proof and non smoke producing
•Flame spread 10 Smoke development Nil (Testing method ASTM E84-08)
Thermal integrity
• Tested between -29C and 66C no cracking no delamination (Testing method ASTM c1263-05)
We offer installation services for Ecosulation reflective insulation. Reflective insulation can be installed below or above roof purlins. Our experienced team ensures that operations are not disturbed and installation is carried out with minimum hassle.
How is Ecosulation Installed?
Easy and hassle free installation in new and existing sites
Since the material has to cover the entire roof, if necessary ,an iron rod is affixed to the sides of the roof so that it provides a place where the material and the supporting wires can be attached.
Anchoring provided for supporting wires and material
Steel wires are then strung between the anchor and the purlins. These wires would then be used to support pre cut lengths of Ecosulationinsulation.
Wires laid out between purlins to support weight
Sheets of Ecosulation are laid out above the wires and secured with tape. Care is taken to ensure that an air gap is maintained between the roof and layer of insulation so that heat transfer through conduction is minimized.
Precut lengths of Ecosulation are laid out over the supporting wire. Overlap is taped securely
Wherever there is an overlap between two sheets of Ecosulation, reflective tape is affixed to maintain a shiny surface.
Reflective tape used to secure overlaps
Our team has been doing this for more than 9 years. We ensure that the installation is quick, convenient and the insulation maintains its efficiency for years .
Proper installation ensures optimum performance of insulation
Thanks for your time!
Visit our website
e mail us
Get social
In case you have any doubts just let us know
Ecosulation Radiant Barrier Insulation
91-B, HSIIDC Sector 31
Faridabad Haryana India 121003
+911294041980, +9811327862
Anything else?