Hotpoint Dish Washer

20
Instructions for Installation and Use DWT10 60cm free standing Dishwasher

Transcript of Hotpoint Dish Washer

Page 1: Hotpoint Dish Washer

Instructions for Installation and Use

DWT1060cm free standing

Dishwasher

Issue date 9/10/03

Page 2: Hotpoint Dish Washer

2 ARISTON DISHWASHER - Instructions for installation and use

D ISHWASHER

Issue date 9/10/03

Page 3: Hotpoint Dish Washer

ARISTON DISHWASHER - Instructions for installation and use 3

D ISHWASHER

Contents

Electrical ConnectionFor Your SafetyInstallationGetting to know your DishwasherHow to use your DishwasherProgramme ChartBefore Using your DishwasherLoading your DishwasherInformation for Test LabsCare and CleaningTroubleshootingNotesAfter Sales ServiceHotpoint GuaranteeKey Contacts

456789

10-1112131415

16-171819

Back Cover

Retention of this Instruction BookThis Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of theappliance.

If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is alsoprovided so the new owner can become familiar with the appliance and safety warnings.

If the Book is lost or damaged a copy may be obtained from:Merloni Elettrodomestici UK LTD., Morley Way, Peterborough, PE2 9JB

Issue date 9/10/03

Page 4: Hotpoint Dish Washer

4 ARISTON DISHWASHER - Instructions for installation and use

D ISHWASHER

Electrical Connection

FusesYour appliance comes fitted with a plug and a 13A fuse. If you need toreplace the fuse, only those rated at 13A and ASTA approved toBS1362 should be used. If you lose the fuse cover, a replacementmay be obtained from your local authorised Service Centre orElectrical company. Correct replacement is identified by colour codingor the marking on base of plug.

WARNING: DO NOT use the plug unless the fuse cover is fitted.

WARNING: The dishwasher must not be connected to the electricitysupply while installation is being carried out.

WARNING: This appliance must be earthed.

Changing the PlugCut off and dispose of the supplied plug if it does not fit your socket.

WARNING: To avoid a shock hazard DO NOT insert the discarded pluginto a socket anywhere else.

IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED INACCORDANCE WITH THE FOLLOWING CODE:Green/Yellow - EarthBlue - NeutralBrown - Live

If you change the plug, the colour of the wires in the mains lead maynot correspond with the terminal markings in the plug, which if notcoloured, could be:EARTH ‘E’ orNEUTRAL ‘N’LIVE ‘L’

Changing the Mains LeadA lead can be ordered from Hotpoint ServiceUK: 08709 066 066 orRepublic of Ireland: 1850 302 220If you have damaged the existing lead or require a longer one acharge will be made. It is strongly advised that this work is carried outby a qualified electrician.

If the domestic wiring includes a residual current-operated circuitbreaker, ensure that it conforms to the latest regulations.

Safety InformationAt the time of delivery...All functions of your dishwasher have been thoroughly tested at thefactory. A small number of water marks may have been left as aresult, they will disappear when the appliance is used for the first time.

- This appliance should only be connected to a 230/240V ACsource, via a properly installed earthed socket.

- Use the dishwasher solely in a domestic environment.- DO NOT stand or place heavy objects on the door when it is

open, this could damage the door or cause the appliance to tipforward.

If your family includes children...- DO NOT allow children to play with the appliance or tamper

with its controls.- Keep detergents and rinse aids away from children. Keep

children away from the open door of a dishwasher, there couldstill be some detergent left inside.

CAUTION:The dishwasher meets the requirements set out by the regulations inforce concerning safety and electrical equipment.Any technical checks should be conducted exclusively by a trainedand authorised technician: Repairs carried out by unaithorisedpersons will invalidate the guarantee, as well as posing a potentialhazard to the user.

The manufacturer declines all responsibility for damage to persons orproperty resulting from failure to observe the above precautions, fromtampering with even a single component or from the use of non-original spare parts.

Issue date 9/10/03

Page 5: Hotpoint Dish Washer

ARISTON DISHWASHER - Instructions for installation and use 5

D ISHWASHER

For your SafetyThis manual forms an integral part of the appliance. It must always be kept handy for reference. Read through all the instructions contained in this manualbefore using the dishwasher.

1. Seperate the variouspackaging materials anddispose of safely - DO NOTleave discarded packagingmaterial around the home.

2. After removing the packaging,check to make sure yourappliance is intact. If in doubt,contact a qualifiedprofessional.

3. DO NOT use extension leadsand multiple plugs. If theelectricity supply wire is notlong enough, then have itreplaced with one of the correctlength and remember that itshould be free of bends ordangerous kinks.

4. In the event of any damage tothe power cord have itreplaced by a qualifiedtechnician.

5. The mains plug must be easilyaccessible after installation.

6. If the appliance is not operatingproperly or if maintenanceoperations are necessary,disconnect the dishwasherfrom the mains power supply(unplug it!).

7. DO NOT install outdoors, noteven if the area is covered bya roof: it is extremelydangerous to leave it exposedto rain and thunderstorms.

8. If installed on a carpeted orcovered floor, ensure that theopenings on the underside arenot obstructed.

9. Do not touch the heatingelement during or straight aftera wash cycle.

10. If the appliance malfunctions,turn off the water inlet tap anddisconnect the plug from thewall socket. Then read thesection entitled"Troubleshooting". If youcannot resolve the problem,then call Hotpoint Service(see KEY CONTACTS, backpage).

11. Cutlery and sharp utensilsshould always be inserted inrandom order with the bladespointing downwards (takecare with knife blades).

12. For your own safety ensurethe door is closed when thedishwasher is in use.

Installation must be performed by a qualified technician, in compliancewith the regulations in force, including the prevention and elimination ofradio frequency interference.

The dishwasher is designed for washing and drying dishes, anyother use shall be considered improper. The manufacturer declinesall responsibility for uses other than those described above.

The rating plate, featuring thetechnical data, serial numberand markings, is visiblypositioned on the inner edge ofthe door.DO NOT remove the rating plate.

The dishwasher is intended for use by adults. DO NOT allow childrento come near or play with the controls.

Keep children away from detergents and clear of the dishwasher doorwhen open.Keep all packaging material away from children.

1. DO NOT use solvents, such as alcohol or turpentine which maycause an explosion.

2. DO NOT load dishes to wash that are soiled with ash, wax or paints.3. DO NOT lean, sit or stand on any part of the dishwasher - this could

cause injury and/or damage the appliance.4. DO NOT drink any water residues from inside the dishwasher.

Issue date 9/10/03

Page 6: Hotpoint Dish Washer

6 ARISTON DISHWASHER - Instructions for installation and use

D ISHWASHER

InstallationCold water connection.Connect the cold water supplyhose, inserting the small filtersupplied with the dishwasher andmaking sure that it is fastened tightlyin place (see figure 2). If the waterhoses are new or have been out ofuse for an extended period of time,let the water run to make sure it isclear and free of impurities beforemaking the connection. If thisprecaution is not taken, the waterinlet could get blocked, causingdamage to your dishwasher.

Choose where you want to installyour dishwasher, you can place itso that its sides or back panel areside by side with furniture or upagainst the wall. The dishwasher isprovided with water supply and drainhoses, which can be directedtowards the left or right to facilitateappropriate installation.

Levelling.Once the appliance is positioned,adjust the feet by screwing them inor out depending on how high youwant it and to level it so that it ishorizontal. Make sure that it is notinclined more than 2 degrees. If theappliance is level, it will help ensureits correct operation.

Height AdjustmentInsert the appliance into the cutoutand then adjust the height using thescrews located on the front bottompart of the machine. Use ascrewdriver to turn the screws inthe clockwise or anti-clockwisedirection to increase or decreasethe height respectively.

A

Fig.2

Drain hose connection.WARNING: Connect yourdishwasher drain hose to pipeswhich connect to the foul drainsystem and not to surface waterdrains.IMPORTANT: For the correctoperation of your dishwasher, it isessential to comply with the followinginformation:-

Standpipe:Ensure that the hose is not pushedtoo far down the standpipe.If the end of your drain hose is fittedwith ‘retaining flaps’, ensure they areinserted fully into the standpipe. Thiswill prevent the pipe from jumpingout during installation and use.

DO NOT position the standpipe nearan electrical outlet.ENSURE that the drain hose is notkinked and it is routed as shown inthe diagram.

The standpipe should have a boreof at least 38mm (11/2”). It shouldbe installed as shown, have a trapfitted and must discharge into thesame drain system as yourhousehold sink.It MUST NOT be connected to asurface water drain.

Sink Waste System:For under sink drainage:Before connecting the drain hose,remove any internal restrictions -This will prevent a build up of debriswhich could cause a blockage.Remove any restrictions from thewaste spigot and ensure that thesealing bung is removed. The hoseshould be routed, such that it israised to a minimum height of800mm (31/2”).

NOTE: Ensure the sink outletpipe has a minimum diamtere of32mm.

1. Untie the end of the GREYdrainage hose from the rear ofthe appliance.2. Reposition the ‘Hooked EndSupport’ as required along theGREY drainage hose.3. If fitting an under sink wastedisposal unit, cut out themembrane, bung or blankingplug.4. Attach the GREY drainagehose to the under sink wastedisposal unit securely, using theclip and rubber tube supplied.

Ensure the drain hose issecurely attached, to preventit coming away while themachine is in use and causinga flood.

Issue date 9/10/03

Page 7: Hotpoint Dish Washer

ARISTON DISHWASHER - Instructions for installation and use 7

D ISHWASHER

Getting to know your Dishwasher

The ControlsA. ON-OFF Button

Press this button to switch theappliance on.

B. ON-OFF Indicator lightThis light informs you that thedishwasher is on.

C. Door opening handleUse this handle to open the door.

D. Delayed start select buttonThis button delays the start of thewash cycle you selected by 12,9, 6 or 3 hours.

E. Cycle indicator lightThis light informs you which cycleyou have selected or the one inprogress.

F. Half load selection buttonTo allow you to wash a half loadin the upper basket.

E. Upper basket

F. Top spray arm

G. Basket height adjuster

H. Lower basket

I. Bottom spray arm

J. Salt container cap

K. Washing filter

L. Detergent and rinse aiddispenser

This dishwasher conforms to thefollowing European CommunityDirectives:

73/23/EEC of 19/02/73 (LowVoltage) and subsequentmodifications;89/336/EEC of 03/05/89

(Electromagnetic Compatibility)and subsequent modifications;

G. Cycle phase and delayed startindicator lightsThes indicator lights inform youwhich cycle phase is underway(prewash,wash,rinses,drying).If you have set a delayed start,they also indicate the amount oftime left until the wash cyclestarts.

H. Half load indicator lightThis light informs you that the halfload is selected.

P. Cycle select buttonEach time this button is pressed,one of the cycle indicator lights“E” will come on in sequence.

R. Start / Reset buttonWith Start the wash cycle begins,whereas a;; the settings arecleared with Reset.

S. Low Salt indicator lightThis light warns you that it is timeto add more salt.

T. Low Rinse Aid indicator lightThis light warns you that it is timeto add more rinse aid.

scitsiretcarahClacinhceT

htdiW mc06

htpeD mc06

thgieH mc58

yticapaC gnittes secalp12 standard

erusserPretaWsniaM ) rab013,0(aPM1aPK03

egatloVrewoP tealpgnitarees

rewoprebrosbalatoT ta elpgnitarees

esuF tealpgnitarees

Issue date 9/10/03

G

J

I

L

K

H

F

E

S E F RG A

T P C D B

H

Page 8: Hotpoint Dish Washer

8 ARISTON DISHWASHER - Instructions for installation and use

D ISHWASHER

First of all.- Turn on the water supplytap completely.- Add the correct amount ofdetergent.- Load the baskets correctly.- Check that the spray armsrotate freely.- Close the door securely.

- Press the ON-OFF button "A":you will hear a short beep and indi-cator light "B" comes on.Your appliance is now on and await-ing instructions.

Select the wash cycle.Select the wash cycle by pressingbutton "P". Each time this button ispressed, a beep will sound and indi-cator lights “E” will come on insequence.Select the wash cyclemost suitable for the type of dishesto wash (see ‘Programme Chart’).Close the door and press the Startbutton after a few seconds, you willhear a short beep and the wash cy-cle will started.

The dishwasher informsyou.Your dishwasher has indicator lights"G" which light up to indicate thewash cycle phase that is underway.

Modifying a wash cycle inprogress.If you have chosen the wrong cycle- You can modify the wash cycle inprogress, if it has only just started.Keep the Reset button "R" pressedin for approximately 5 seconds, aprolonged beep will sound, followedby three short beeps.Indicator light "G" will go out to showall the settings will have been can-celled. You are now free to re-setthe correct wash cycle.

You've left out a dish?Interrupt the wash cycle by press-ing the On-Off button "A", theninsert the dish you had forgotten.When you shut the door, press theOn-Off button again. The cycle willstart up from where you interruptedit.

Cycle endThe end of the wash cycle is indi-cated by 2 short beeps and theflashing of the drying phase indica-tor light.Turn the appliance off by pressingthe On-Off button “A”, thus switch-ing off the electricity supply.Turn off the water tap.Wait a few minutes before unload-ing the dishes: they are very hot! Ifyou wait a little while, they dry betterdue to the steam.Empty the lower basket first.

There's been a powerfailure or you opened thedishwasher doorThe wash cycle stops and thenrestarts when the electricity comesback on or when you close the door.

How to use your Dishwasher

Delaying the start of aprogramme.When you have loaded the dishes,you can choose when to start yourdishwasher before setting the washcycle desired.Press button "D" to delay the startof the wash cycle by 12, 9, 6 or 3hours. Each time you press it, youwill hear a short beep and indicatorlight "G" corresponding to theselected delay will come on.Select the desired wash cycle.Press the Start button, you hear thebeep, the countdown to the delayedstart will begin.If, for example, you have set a 12hour delay, once you have selecteda wash cycle the 12 hour indicatorlight will flash... followed by the othersin sequence until the set time delayis up. The indicator lights will keepyou informed of the countdownprogress at all times.Once this time is up, indicator light"G" will stop flashing and the washcycle will begin.

If you change your mind and youwish to set a shorter delay, just openthe door, press button "D", you neednot reset the wash cycle.If you want to cancel the delay setand you wish to start the wash cycleimmediately, press button "D"repeatedly until the cycle starts andindicator light "G" corresponding tothe cycle start phase comes on.

Cycle phase and delayedstart indicator light "G"(1) Flashing to indicate adelayed start, to remind you that youhave set a delayed start.(2) On, lit constantly, each lightshows which stage of the washcycle is in progress.

Half load.Your dishwasher also allows you towash half a load, to save water ,electricity and detergent (use onlyhalf the amount).Before setting a wash cycle , pressbutton "F", indicator light "H" willcome on.NOTE: When set the dishwasherwill wash on the upper basket only.

To see the settings youhave selectedAt any time, when the cycle isunderway, if you press button "F",the cycle in progress indicator lightwill light up for a few seconds...followed by the half load indicator lightif set.

For your own safety,ensure the door is closedwhen the dishwasher isnot in use.

Issue date 9/10/03

Page 9: Hotpoint Dish Washer

ARISTON DISHWASHER - Instructions for installation and use 9

D ISHWASHER

Programme ChartSelect the most suitable programme for the type of dishes and how dirty they are. To select the washprogramme see the chart below:

To optimise wash performance and save on energy, try to use the dishwasher with a full wash load. If it takes some time to fill yourdishwasher, use the pre-wash to avoid caked on food and build up of bad odours.

ELCYC ECYCLE SELECTIONINSTRUCTIONS

WASH CYCLE DURATIONRINSE AIDLCYCNOITPIRCSED

ROFTNEGRETEDHSAW&HSAW-ERP )gniyrdartxetuohtiw(

setunimni

EVISNETNI snapdnasehsidytridyreVetaciledrofdesuebotTON(

)smeti

C04taretawtohhtiwhsaw-erPC56tahsawdednetxE

sesnirdloc2C56taesnirtoH

gniyrD

g52+5 * 021

LAMRON dnasnapytridyllamronrofelcyC.sehsid

.elcycyliaddradnatS

retawdlochtiwhsaw-erPC Cold rinse55tahsawtrohS

C07taesnirtoHgniyrD

g52+5 * 27

OCE ,elcycyldneirfyllatnemnorivnEnoitpmusnocygrenewolhtiw

ytridyllamronrofelbatius,slevel.sehsiddnasnap

sehsaw-erpdloc2C54tahsawdednetxE

C56taesnirtoHgniyrD

g52+5 * 021

TSAF ebotelcyctsafdnacimonocE.sehsidytridylthgilsrofdesu

.esuretfayletaidemmielcycnuR.gniyrdoN

C04tahsawtrohSesnirdloC

g52 62

HSAW-ERP sehsidrofelcychsawyranimilerPehtfonoitelpmocgnitiawaelihw

ehtmorfsehsidehthtiwdaol.laemtxen

dooftneverpothsawdloctrohS.sehsidehtotnogniyrdmorf 21

SETACILED rofdesuebotelcyclaicepSerahcihwsmetietacilederom

.serutarepmethgihotevitisnes.esuretfayletaidemmielcycnuR

C05tahsaWC54taesnirR

C56taesnirtoHgniyrD

g52 * 69

Issue date 9/10/03

Page 10: Hotpoint Dish Washer

10 ARISTON DISHWASHER - Instructions for installation and use

D ISHWASHER

Before Using your Dishwasher

Water hardness varies accordingto where you live. If the water inyour home is hard, without watersoftening, incrustations wouldform on your dishes. Yourdishwasher is fitted with a watersoftener which uses special salt toget rid of limescale in the water.

Adjusting the water softener.Your dishwasher can adjust its saltconsumption according to the hard-ness of the water in your home.This way, you can optimise andcustomise your dishwasher's saltconsumption.To adjust salt consumption, do asfollows:1. Unscrew the salt container cap2. There is an arrow on the neck

of the container (see figure): ifnecessary, turn the arrow anti-clockwise from the "-" settingto the "+" setting.

Select the arrow positiondepending on the waterhardness, referring to the table.

To prevent rust from forming,load the salt just beforebeginning a wash cycle.

W aterHardness

Clarkedegrees

°fH m m ol/lSelectorposition

Saltconsum ption(gram s/cycle)

Autonom y(cycles\2kg)

0 14 0 17 0 1,7 / 0 /

14 36 18 44 1,8 4,4 " " 20 60

36 71 45 89 4,5 8,9 M ED 40 40

>71 > 89 > 8,9 "+" 60 25

You don't know how hard thewater in your home is? Askthe company that supplies

water in your area.

Filling the salt container.Always use salt which is intendedfor dishwasher use.The salt container is situatedunderneath the lower basket, fill itup as follows:1.Pull out the lower basket

completely, unscrew andremove the container cap

2. If it is the first time you add thesalt, first fill the container up withwater (you won't have to do thisagain next time)

3. Put the dishwasher funnel on thehole and pour in approximatelytwo kilos of salt. It is normal thatsome water comes out of thecontainer.

4. Screw the cap back in placecarefully.

When to add salt:The salt container should be filledup when the low salt indicator light“S” flashes.The dishwasher will remind you todo so for five consecutive washcycles.

Salt

IMPORTANT:Only use recommend dishwashersalt DO NOT use everyday tablesalt, cooking salt as they containinsoluble substances which couldharm your dishwasher.

WARNING:DO NOT pour detergent into thespecial salt container - This will de-stroy the water softener.

IMPORTANT NOTICE:3 in 1 dishwasher tablets are now available. These combine detergent, saltand rinse aid ALL IN ONE. If the water in your area is hard or very hard, westill recommend you add salt to the salt container to prevent white streakson your dishes and in the dishwashers interior.Add rinse aid to the dispenser, only if you are dissatisfied with the results.In all cases, please read the manufacturers instructions on the packet.If you are only using the 3 in 1 products, after a number of cycles it is normalfor the salt and rinse aid indicator lights to flash permanently.

Issue date 9/10/03

Page 11: Hotpoint Dish Washer

ARISTON DISHWASHER - Instructions for installation and use 11

D ISHWASHER

Rinse aid.Rinse aid makes dishes sparklemore as it improves their drying. Therinse aid container is situated on theinside of the door.You should fill the rinse aid containerwhen indicator D lights up on thecontainer (see right) and the rinseaid indicator light "T" on the controlpanel flashes.

Adding rinse aid.To open the dispenser, turn cap Canticlockwise. Take care when youpour in the rinse aid to avoid itoverflowing. You can regulate theamount of rinse aid used by thedishwasher, move the adjuster Fwhich you will find under lid C.

The detergentAdding detergentTo open lid A, press button B.The detergent should be put into thetwo containers C and D.If using a tablet, put it in container"D".Now you can close the lid: press itdown until you hear it click.

If it won't closeCheck whether there is anydetergent residue on the edges ofthe dispenser. Remove the excess.

You can choose from six different positions.

It is normally set to 4.

Before Using your Dishwasher

- The amount of rinse aidneeds to be increased if thedishes appear dull or you cansee circular stains.- The amount of rinse aidneeds to be reduced if thedishes are sticky or you cansee white streaks.

We recommend Glist 3 in 1 for use in all Hotpoint dishwashers...Brilliant cleaning is guaranteed with Glist 3 in 1.Hotpoint only recommends Glist 3 in 1 Dishwasher tablets to give outstanding cleaning andcare.It is important to use detergent specially designed for domestic dishwashers. (Always follow themanufacturers instructions.)Glist 3 in 1 advanced dishwasher tablets with active enzymes are the ideal way to protect and care foryour dishwasher, while getting your dishes and glasses sparking clean.

Softer Water:Built in salt action softens water, helping to prevent the build up of limescale in the dishwasher andimprove the cleaning result*.Cleaner Dishes:With unique active enzymes in the cleaning phase Glist 3 in 1 breaks down even the hard to shiftfoodstuffs and grease, leaving the dishes spotless and the dishwasher clean too.Sparkling Results:The built-in Glist rinse agent ensures the dishes and glasses are free from water marks and smears.

If you have any questions regarding Glist 3 in 1, please contact the hotline on 0800 216 730.

*If you live in an area particularlyprone to very hard water ( 35°f)Glist and Hotpoint recommendthat you continue to keep yourdishwasher salt topped up.

• Use the right amount of detergent(see programme chart).

Store your detergent and rinse aidin a cool, dry place, safely away fromchildren.

Issue date 9/10/03

Page 12: Hotpoint Dish Washer

12 ARISTON DISHWASHER - Instructions for installation and use

D ISHWASHER

Loading your DishwasherFirst of all.Before placing dishes in the baskets,remove all course food remains. Thisavoids blocking the filter, whichwould reduce the efficiency of thewash.If saucepans and frying pans arevery dirty, allow them to soak beforebeing washed.To make it easier to load your dishes,pull the baskets out.

What goes into the lowerbasket?We recommend you place the mostdifficult dishes to wash into the lowerbasket: saucepans, lids, soupdishes and plates (a load exampleis shown in the photo).

Serving dishes and large lids:place them on the sides of thebasket.Saucepans, salad bowls: mustalways be placed upside downVery deep dishes: place themobliquely, thus allowing water torun down them and cleaningthem betterGlasses and cups: positionthem as shown in load examplephoto.

The cutlery basket is equipped withtwo removable grids. Cutlery andsharp utensils should always beinserted in random order with theblades pointing downwards (takecare with knife blades. Position themso that they don’t touch.

What goes into the upperbasket?Place delicate and lightweight dishesin the upper basket: glasses, teacups and coffee cups, saucers andplates - shallow salad bowls, slightlydirty frying pans and shallow pans.Position lightweight dishes in suchas way as to avoid their being movedby the spray of water.The dishwasher can also beequipped with one or two tip upcompartments onto which you canplace mugs and cups, as well aslong sharp knives and servingcutlery.

After loading the dishes, rememberto check that the spray arms canturn freely without hitting against anydishes.

How to adjust the upperbasket.The upper basket can be set in highor low position to enable you toorganise your dishes effortlessly.Open the rail stop flaps and pull therack out completely. Now place it inthe high or low position, then slide isalong the guide rails until the frontwheels also go in.Now close the rail stop flaps.Follow the sequence 1,2,3,4illustrated (below).

Load examplesupper basketlower basket

What can I Wash Items not suitable for the dishwasher:

Cutlery and tableware made from wood or part wood - They may become faded and unsightly in appearance.Avoid washing horn handled and bronze cutlery in the machine.Delicate/decorative glassware and vases, special antique or irreplaceable china - the decorative patternsprinted on these items will not be dishwasher proof.Plastic objects that are not resistant to hot water.Copper and Pewter utensils. Aluminium and Sliver objects.Some types of glass can become opaque in appearance after they have been washed too many times in adishwasher.Highly absorbent materials such as sponges and towels should never be placed in a dishwasher.If in any doubt, check with the manufacturer on items suitability for dishwasher’s.

WARNING: Dishes or cutlery soiled with tobacco ash, wax, lubricating grease or paint should not be putin the dishwasher.

Our recommendation: In future, only purchase table or kitchenware that has been confirmed - dishwasher proof.

Issue date 9/10/03

Page 13: Hotpoint Dish Washer

INFORMATION FOR TEST LABS

e

fg

hi

g

g

ge

k

12

61

2 3

5

4

e

3

upper basket

Load for 12 Standard Settings tests (upper basket at top position)

B

A

Comp1 Comp2 Comp3

C

F

D

Loading the detergentTo open lid "A", press button "B". The cleaning detergentshould be introduced into the three containers "1", �2�and�3�. "(see table at the end of this page)

The rinse aidThere are 6 different settings; the normal dosage setting is 5.

This basket isequipped with tworemovable grids:insert the cutlery oneby one into the slots,with the handles atthe bottom. Positionthem so that theydon't touch.

B

12

8

A

C

1

A

4

C

1

D

1

C

1

C9

lower basket

/RZHU�EDVNHW 8SSHU�EDVNHW

Type ItemDiameter/Volum(approximately)

Type ItemDiameter/Volum(approximately)

$ soupe plate 23 cm. H cup 0,20 l.

% dinner plate 26 cm. I serving bowl 19 cm.

& dessert plate 19 cm. J glass 250 ml.

' oval platter 35 cm. K saucer 14 cm.

N serving bowl 13 cm.

L serving bowl 16 cm.

78 6 4 5123

3 3 3 3 3 3

5 5 5 5 5 537 373

5 5

3 3

6 8

3 5

5

5

5

4 4 4 4 4 4

4 4 4 4 4 4

2

2

2

2

2

2

2

2

2

2

2

2

1

1

1

1

1

1

1

1

1

1

1

1

Press the �extra dry� button, if existing.Don�t press the �extra dry� button only for the free-standing diswashers with �turbo-dry� fan (see pag. 2)

EN 50242IEC/ DIN

Cycle Eco wash

Total detergent30 gr.

30 gr.

Comp.1 Comp.2 Comp.325 5

30*

*

Eco wash+extra dry

ARISTON DISHWASHER - Instructions for installation and use 13

Page 14: Hotpoint Dish Washer

14 ARISTON DISHWASHER - Instructions for installation and use

D ISHWASHER

Care and Cleaning

Cleaning the spray arms.Food residue may becomeencrusted onto the spray arms andblock the holes where water comesout. Check the spray arms regularlyand clean them once in a while.

DO NOT use solvents or abrasivesto clean the exterior and rubber partsof your appliance, do not usesolvents or abrasive cleaningproducts. Use a cloth dampenedwith lukewarm soapy water only.If there are any stains on the surfaceof the appliance interior, use a clothdampened with water and a littlewhite vinegar, or a cleaning productspecifically made for dishwashers.

1

2 AB

C

Cleaning the Water InletFilterPeriodically clean the water inlet filter(see figure 2 under "Installation")located on the outlet of the watersupply tap. After turning off the watertap, unscrew the end of the watersupply hose, remove the filter andclean it carefully under running water.Then, return the filter to its place andtighten the water supply hose backinto position.

Unplug the appliance.Before carrying out any cleaning ormaintenance on the dishwasher,always remove the plug from theelectricity socket.

The seals.One of the factors that causeunpleasant odours to form inside thedishwasher is food that remainstrapped in the seals. Periodiccleaning using a damp sponge willprevent this from occurring.

Going awayIf the dishwasher is not going to beused for some time, carry out thefollowing: run a cycle with the dishwasher

empty. switch off at the electrical socket

and unplug. turn off the water supply tap,

disconnect the inlet hose andallow to drain.

fill the rinse aid dispenser. leave the door ajar, to prevent the

build up of unpleasant odoursinside the dishwasher.

Before using the dishwasher after along break, plug in and switch on atthe electrical socket. Reconnect theinlet hose and turn on the watersupply tap. Check there are nodeposits of rust inside the waterpipe, if there are allow water to runfrom the supply tap for a fewminutes.

Moving the appliance.Drain water from the dishwasher.Secure all loose parts. Onlytransport in an upright position. If not kept upright during transport,

any water remaining inside mayseep into the control module andcause subsequent errors withprogramme functions.

Disconnecting the dishwasher.When disconnecting the dishwasherit is important that tasks are carriedout in the correct sequence. switch off at the mains and remove

the plug from the socket. turn off the water supply. disconnect drain and water inlet

hose. pull out the dishwasher, carefully,

withdrawing hoses at the sametime.

A

D

B

C

The filter assembly.If you want consistent good results from your dishwasher, you need to clean the filter assembly.The food particles are removed from the wash water, allowing it to be recirculated during the cycle, filtered perfectly.For this reason it is a good idea to remove the larger food particles trapped in the inside the semi-circular filter "A" and the cup "C" after each wash; to remove the filter assembly pull the cup handle upwards. All you need to do is rinse them under running water.

The entire filter assembly should be cleaned thoroughly once a month: semi-circular filter "A" + cup "C" + cylindrical filter "B" + microfilter "D".

To remove filter "B", turn it anti-clockwise. Use a small non-metallic brush for cleaning.

Reassemble the filter parts (as shown in the figure) and reinsert the whole assembly into the dishwasher. Position it into its housing and press downwards.

The dishwasher is not to be used without filters. Improper replacement of the filters may reduce the efficincy of the wash and even damage your dishwasher.

Issue date 9/10/03

Page 15: Hotpoint Dish Washer

ARISTON DISHWASHER - Instructions for installation and use 15

D ISHWASHER

Caution- Do not forget that repairs should be carried out by a qualified specialist. Improper repairs can lead to considerable equipmentdamage, as well as danger to the user.- The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out.Switch off at the mains socket and water supply and remove the plug.

If the dishwasher won'tstart, check...

Is the dishwasher plugged in at theelectricity socket and switched on?Is there a power failure, check otherappliances.Check the fuse.Is the water supply tap turned on?Is the water inlet hose connectedproperly?Is the pressure of the water supplysufficient?Is the inlet hose kinked?Is the filter on the water supply hoseblocked?Is the dishwasher door not closedproperly?

If water remains inside thedishwasher, check...

the drain hose is not kinked.the drain syphon is not obstructed.the dishwasher filters are not clogged.

If the dishes are not beingcleaned properly, check...

the correct amount of detergent hasbeen added.there is regenerating salt in the saltcontainer.the dishes have been loaded correctly.the selected programme is suitablefor the type of dishes and the degreeof soiling.all filters are clean and positionedcorrectly.the spray arm nozzles are notobstructed.there is nothing obstructing therotation of the spray arms.

Detergent compartment lidcan not be closed, check...

has the compartment been overfilled?is the mechanism clogged withremnants of detergent?

If the dishes fail to dry orremain dirty, check...

there is rinse aid inside the rinse aidcontainer.the rinse aid dispenser setting iscorrect.the detergent being used is of goodquality and has not lost itseffectiveness (for example, throughincorrect storage, with the box leftopen).

If the dishes show signs ofstreaking, staining etc.check...

the rinse aid dispenser setting is notset too high.

If there are visible tracesof rust inside the tank,check...

the cap off the salt container issecurely closed and that the watersoftner setting is correct.the correct amount of detergent isbeing used. Certain detergents canbe more corrosive than others.the tank is made of steel and thereforeany rust marks are due to externalelements (fragments of rust from thetank pipes, pots, cutlery etc.) Specialproducts are commercially availableto remove such marks.

...During washingUnusual amount of foam is created:- Has the correct detergent been used.Dishwasher stops suddenlyduring a wash cycle:- There has been a power cut.- Water supply has been interrupted.Knocking sound can be heardinside the dishwasher:- A spray arm is knocking againstdishes.Rattling sound an be heard insidethe dishwasher:- Crockery has not been stackedproperly.Knocking sound can be heardcoming from the inlet valves:- This is caused by the way the waterpipes are laid ad it has no effect uponthe way the dishwasher functions.

Error messagesYour dishwasher is equipped with a safetysystem which is able to detect operatingfaults.These faults are reported by one or twowash cycle indicator lights “E” flashingrapidly.Take a note of which lights are flashing,turn the appliance off and call HotpointService for technical assistance (see backpage).

Tap off alarmIf you have forgotten to turn the water tapon, your dishwasher will remind you bysounding a few short beeps for a fewminutes.Turn on the water tap and the dishwasherwill start after a few minutes.If you are not there when the beepssounded, the appliance will stop automati-cally and wash cycle indicator lights 4and 5 (fast wash and pre-wash) will flashrapidly.Turn the dishwasher off at the On-Offbutton, check the water supply and turnon the water tap, wait approximately 20seconds before turning appliance backon. Repeat your wash cycle selectionsand press the Start button.

Clogged filter alarmIf wash cycle indicator lights 3 and 5 (ecoand pre-wash) flash rapidly, this meansthe filter is blocked.Turn the dishwasher Off, follow cleaninginstruction in the ‘Care and Cleaning’ sec-tion.When the filter is back in position, turnthe dishwasher back on.Repeat your wash cycle selections andpress the Start button.

Troubleshooting

Resolving minor problems yourself.Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without havingto call out a service engineer. Not only does this save costs but it also means the appliance is available for use againthat much sooner. The following list of common occurences and their remedies should help you identify the causes ofmost problems.

If after all the checks, the appliancestill does not operate or the problempersists, call Hotpoint Service (seeKEY CONTACTS, back page) andinform them of:- the type of problem- the abbreviation of the model name(Mod.) and the relative numbers (S/N) written on the rating platelocated on the inner edge ofthe door.

Switch off at the mains socketand remove the plug. Turn offthe water supply.

Issue date 9/10/03

Page 16: Hotpoint Dish Washer

16 ARISTON DISHWASHER - Instructions for installation and use

D ISHWASHER

Notes

Issue date 9/10/03

Page 17: Hotpoint Dish Washer

ARISTON DISHWASHER - Instructions for installation and use 17

D ISHWASHER

Notes

Issue date 9/10/03

Page 18: Hotpoint Dish Washer

18

"No company is better positioned to offer an after sales service on aHotpoint appliance than us - the manufacturer"

As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusiveparts and labour guarantee for the first 12 months. In addition to this you also have the advantage of

free replacement parts for the first 5 years when fitted by a Hotpoint engineer. When the 12months parts and labour guarantee expires we offer the following after sales service options:

Repair Service and Information Help DeskUK: 08709 066066

www.theservicecentre.co.ukRepublic of Ireland: 1850 302 200

Note: Our operators will require the Model number and the Serial number of your appliance

Available 364 days a year with a fast, effective and value for money service. We have the largestwhite goods repair service in the UK with over 900 of our own fully trained engineers. All repairs

include a parts and labour guarantee for 12 months from the date of the repair.If you require any information or have any questions about your appliance, our operators are on

hand with help and advice. All this ensures that you will receive the best available after sales service possible.

Extended WarrantiesUK: 08709 088 088

www.theservicecentre.co.ukRepublic of Ireland: 1850 502 200

Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two servicecover plans to give you total peace of mind.

Repair Protection Plan - FREE service repairs for a single Hotpoint appliance during theperiod of cover.

Kitchen Cover - FREE service repairs for all your Hotpoint appliances less than 8years old.

Genuine Parts and AccessoriesUK: 08709 077 077www.theservicecentre.co.uk

Republic of Ireland: (01) 842 6836

A wide range of genuine parts and accessories are available from our hotline or through our website.

Genuine parts and accessories, extended warranties and service repairs are allavailable on our web-site at:

www.theservicecentre.co.uk

After Sales Service

Issue date 9/10/03

Page 19: Hotpoint Dish Washer

19

Guarantee

"Satisfaction guaranteed or your money back"

We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you havepurchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair

service or visit our web-site at www.theservicecentre.co.uk and where necessary, we will arrangefor an engineer to call. If the technical problem is not resolved under this guarantee, we will

replace your machine or, if you prefer, give you your money back.

All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as freereplacement parts for the first 5 years (except microwaves, selected integrated appliances andcooker hoods, which have a one year guarantee) provided that they are fitted by a Hotpointengineer.

Guarantee terms and conditionsYour guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject tothe following provisions that your appliance:� Has been installed and used correctly in accordance with this instruction booklet.� Has been used solely for domestic purposes and is located on domestic premises (ie. not

for commercial or trade use).� Has been properly connected to a suitable electrical supply voltage as stated on the

appliance rating plate.� Has not been subject to misuse, accident, modified or repaired by anyone other than one of

our own service engineers.

For pre purchase information on any other Hotpoint product call: 08701 50 60 70or visit: www.hotpoint.co.uk

Recycling & Disposal Information

As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the rightto use quality recycled components to keep down customer costs and minimise material wastage.Please dispose of packaging and old appliances carefully.To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with theappliance. Dispose of these parts separately to ensure that the appliance can no longer beplugged into a mains socket and the door cannot be locked shut.

Issue date 9/10/03

Page 20: Hotpoint Dish Washer

Over 900 trained specialists, directly employed by us, ensure that you can have completeconfidence in both the appliances and services we offer.

Repair Service and Information DeskUK: 08709 066 066

(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)www.theservicecentre.co.uk

Republic of Ireland: 1850 302 200Note: Our operators will require the following information:

Model number:

Serial number:

Extended WarrantiesUK: 08709 088 088

(Open 8 to 8 Mon - Sun)www.theservicecentre.co.uk

Republic of Ireland: 1850 502 200

Genuine Parts and Accessories UK: 08709 077 077

(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)www.theservicecentre.co.uk

Republic of Ireland: (01) 842 6836

Merloni Elettrodomestici UK Ltd., Morley Way, Peterborough, PE2 9JB.

Key Contacts

After Sales Service

195040957.00