March 1st, 2012

Seite 1 von 5

Hostaform® C 13021 GADSL (global automotive declarable substance list, 2011 GADSL Version 1.0) (content of substances is covering VDA 232-101) – see also listing in IMDS – Database Please note that the manufacturer or seller of parts and articles made out of the above mentioned products have to take the full responsibility regarding applicable legal requirements. Ticona confirms that the above mentioned products by constitution do not contain the following substances: Heavy metals and their compounds

Antimony LithiumArsenic NickelBarium Mercury Beryllium Selenium Bismuth SilverLead TelluriumCadmium Thallium Chromium Thorium Cobalt TinCopper

Halogenated substances - brominated compounds - chlorinated compounds - e.g.

Substance HBFC Hydrobromofluorocarbons PBB Polybrominated Biphenyls PBT Polybrominated Terphenyls PBDE Polybrominated Diphenylethers TBBA Tetrabromobisphenol A PCP Pentachlorophenol TCB Trichlorobenzol,(2005/59/EC) HCB Hexachlorobenzene HCFC Hydrochlorofluorocarbons PCB Polychlorinated Biphenyls PCT Polychlorinated Terphenyls PCN Polychlorinated Naphthalenes PCDE Polychlorinated Diphenylethers

March 1st, 2012

Seite 2 von 5

SCCP short chain chlorinated paraffins MCCP medium chain chlorinated paraffins LCCP long chain chlorinated paraffins HBCDD Hexabromocyclododecane PVC Polyvinylchloride TRIS Tri (2,3-dibrompropyl)-phosphat TEPA Tri-(aziridinyl)phodphinoxid Vinylchloride TBP 2,4,6- Tribromophenol TBA 2,4,6- Tribromoanisole

Softener: Phthalates, e.g. (Dir 2005/84/EG)

Substance DEHP Diethylhexylphthalate DOP Di-n-octylphthalate DINP Diisononylphthalate DIDP Diisodecylphthalate DBP Dibutylphthalate BBP Benzylbutylphthalate DBP Dibutylphthalat DEP Diethylphthalat DMEP Bis-(methoxyethyl)-phthalat DnPP Di-n-pentylphthalat DNOP Di-n-octylphthalat DiPP Diisopentylphthalat DIBP Diisobutylphthalate

Other substances

Substance 2-(2'-Hydroxy-3',5'-di-tert-butylphenyl)benzotriazole - CAS No. 3846-71-7 2-Isopropylthioxanthone (ITX) 4-tert-Butylbenzoic acid (PTBBA); CAS-No.: 98-73-7) Acetophenone Acrylonitril Acrylamines Alkylphenolethoxylates (APEO) Butylhydroxytoluol (BHT) Bisphenol-A (CAS-RN. 80-05-7) Bisphenol-F-diglycidylether (BFDGE) – 1895/2005/EC Benzene Benzoyle peroxideBenzidin Chlorpyrifos (CAS- No.: 2921-88-2) Colophony, Pine rosin; CAS: 8050-09-7

March 1st, 2012

Seite 3 von 5

CMR- substances CYCLODODEKANE- CAS-No. 294-62-2Diethylene glycol dimethacrylates Dimethylformamide (DMF, CAS-RN. 68-12-2) Diazinon (CAS- No.: 333-41-5) Dimethyl-benzenemethanol Ethyl benzene (CAS No.: 106-46-7)Fenobucarb (CAS- No.: 3766-81-2) Flame retardants Gluten Glycol Kalium-Dichromat Kreosot Latex Lindane Mirex (Perchlordecone) Organotin compounds (Tributyltin, Triphenyltin) Octylphenol, Nonylphenol Octylphenolethoxylates – OPEO Nonylphenolethoxylates – NPEO n- Tetradecane (CAS- No.: 629-59-4) Nonanal (CAS-No.: 124-19-6) Parabene, 4-Hydroxybenzoic acid estersp- Dichlorobenzene (1,4- Dichlorobenzene) PFOA - Perfluorooctanoic acid PFOS Perfluoroctane sulfonate PFOSA - Perfluorooctane sulphonamide and derivatives that contain any of the following groups: C8F17SO2, C8F17SO3 and C8F17SO2N Red Phosphorus Styrene (CAS- No.: 100-42-5) Sulfur SVHC (substances of very high concern as listed in Annex XIV of REACH) PVC (Polyvinylchloride) Radioactive materials Silicones Toulene, all isomers Xylene (Dimethyl-benzene), all isomers

Halogenated dioxins and furans With the „the revised version of the chemical prohibition ordinance“ („Neufassung der Chemikalien-Verbotsverordnung“) of June 13th, 2003 (recent amendment of June the 21st, 2005) the extended prohibitions and restrictions for polybrominated and polychlorinated dioxins and furans are regulated. We hereby confirm that all products as delivered by us comply with this ordinance (in the currently valid version).

March 1st, 2012

Seite 4 von 5

CONEG-Regulation and EU Directive 94/62/EC We hereby certify, that in compliance to the CONEG-Regulation as well as to the EU Directive 94/62/EC “Packaging and Packaging Waste”, Article 11 the total concentration of the heavy metals Lead, Cadmium, Mercury and Chromium-VI in the above mentioned products do not exceed 100 ppm by weight (100 mg / kg polymer). This certificate implies constitutionally caused concentration of heavy metals as well as ubiquitous traces. Ozone depleting substances; German regulation of the ban of halones Herewith we confirm that above mentioned products by constitution do not contain ozone depleting substances: none of the substances listed in Annex 1 of the EU-Ordinance 2000/2037/EC on ozone depleting substances are contained in the a.m. products. In addition, the a.m. products are in accordance with the German FCKW-Halon-Verbots- Verordnung (German regulation of the ban of halones) of May 6th, 1991 including its amendment of October 29th, 2001. Asbestoes compounds Asbestoes and other fibers which are able to pass into the lungs are not used in the above mentioned products. Azo dyes We hereby confirm that the above mentioned product does not contain Azo dyes with carcinogenic amine compounds. BADGE, NOGE We also confirm that bisphenol A diglycidyl ether (BADGE) and Novolac glycidyl ether (NOGE) are not used to manufacture above listed products. Phenol derivates are included in the above mentioned products like in almost all plastic materials as antioxidants.

March 1st, 2012

Seite 5 von 5

Formaldehyde Polyacetals can release Formaldehyde when manufactured. Please keep in line with the applicable occupational health and safety requirements. Usually our products are in compliance with EU Migration-Limit (EU 10/2011) for food contact applications and with VDA 275 test (emissions in cars). However, both tests have to be conducted at the end product. The presence of ubiquitous traces of undesired substances cannot be totally excluded. Ticona GmbH, Product Safety. Important: This information relates only to the above mentioned materials as delivered in their original packaging. It does not relate to any product made of these materials with or without the inclusion of further additives, such as processing aids or colorants. To the extent that any hazards may have been mentioned in this publication, we neither suggest nor guarantee that such hazards are the only ones that exist. This information should not be construed as a promise or guarantee of specific properties of the products described or their suitability for a particular application. Any existing intellectual property rights must be observed. It is the responsibility of any manufacturer of medical devices containing Ticona resins to determine the necessary steps to ensure the safe and efficacious use of their products/devices and to obtain the necessary regulatory approvals for the intended applications. Insofar as this information relates to sterilization for medical purposes, the data contained herein show the typical effects of sterilization procedures on the nominal physical properties (using standardized test specimens) of the Ticona resins. The actual sterility of the parts has not been evaluated for either single or multiple use applications. The products mentioned herein are not intended for use in medical or dental implants.