HORIZONTAL BALER TYPE AVOS 1211 - CK International€¦ · horizontal baler type AVOS 1211 you have...
1
HORIZONTAL BALER TYPE AVOS 1211 HIGH EFFICIENCY IN COMPACT DESIGN Avermann reserves the right to alter specification without prior notice. Bale weights given are guidelines only, actual bale weights depend on operator and material baled. Go for flexibility • oil-heating element • 400 kg wire coil holders • feeding conveyor to fill the baler evenly and continuously • large display to indicate the bale length • hook base frame. ADVANTAGES _ Solid, torsion-resistant construction _ Individual equipment options _ Vertical 4-fold binding _ Compact design. Space saving with full efficiency: Deciding on the AVERMANN horizontal baler type AVOS 1211 you have latest-state-of-the-art technology in solid design. Thanks to the compact design only little space is needed. Thus you profit from a ‘slim’ design with all advantages regarding functionality and required quality. Moreover the horizontal baler type AVOS 1211 offers a fully automatic operation as well as the proven 4-fold binding. AVOS 1211-15/50 Machine Length 5800mm Machine Width 1800mm Machine Height 3000mm Feed Hopper Cross Section 1200 x 1100mm Dead Weight (Approx) 8500 Kg Bale Size (W x H) 1100 x 700mm Bale Length Adjustable Bale Weight* Up To 400 Kg Binding 4 Fold Vertically Channel Adjustment Semi Automatically Electricity 3 x 400 V, N, PE/50 Hz Cycle Type (Empty) 34 sec Idle Speed Capacity (Theoretically) 99 m 3 /h Throughput** 35 kg/m 3 (Cardboard) 2.7 t/h Throughput** 60 kg/m 3 (Cardboard, paper) 4.7 t/h Throughput** 100 kg/m 3 (Newspapers) 6.5 t/h Specific Press Force 64.9 N/cm 2 TECHNICAL DATA CK International Ltd. 38a Eglish Road Dungannon Co. Tyrone Northern Ireland BT70 1LA T: +44 (0) 28 8775 3966 F: +44 (0) 28 8772 5528 [email protected] www.ckinternational.co.uk Valid for all machine types Electricity: 3 x 400 V, N, PE/50 Hz; Plug connector: CEE-5 x 32 A/6 h or direct connection; Fuse protection (on site): 32 A, slow; Control voltage: 24 V DC. * Depending on bale length and material ** Relating to apparent weight You can get your horizontal baler type AVOS 1211 with: THE ENTRY MODEL WITH PROVEN TECHNOLOGY Press Force 500 kN Drive Capacity 15 kW
Transcript of HORIZONTAL BALER TYPE AVOS 1211 - CK International€¦ · horizontal baler type AVOS 1211 you have...
HORIZONTAL BALER TYPE AVOS 1211HIGH EFFICIENCY IN COMPACT DESIGN
Avermann reserves the right to alter specification without prior notice. Bale weights given are guidelines only, actual bale weights depend on operator and material baled.
Go for flexibility
• oil-heating element
• 400 kg wire coil holders
• feeding conveyor to fill the baler evenly and continuously
• large display to indicate the bale length
• hook base frame.
ADVANTAGES
_ Solid, torsion-resistant construction_ Individual equipment options_ Vertical 4-fold binding_ Compact design.
Space saving with full efficiency: Deciding on the AVERMANN horizontal baler type AVOS 1211 you have latest-state-of-the-art technology in solid design. Thanks to the compact design only little space is needed. Thus you profit from a ‘slim’ design with all advantages regarding functionality and required quality. Moreover the horizontal baler type AVOS 1211 offers a fully automatic operation as well as the proven 4-fold binding.
AVOS 1211-15/50Machine Length 5800mmMachine Width 1800mmMachine Height 3000mmFeed Hopper Cross Section 1200 x 1100mmDead Weight (Approx) 8500 KgBale Size (W x H) 1100 x 700mmBale Length AdjustableBale Weight* Up To 400 KgBinding 4 Fold VerticallyChannel Adjustment Semi AutomaticallyElectricity 3 x 400 V, N, PE/50 HzCycle Type (Empty) 34 secIdle Speed Capacity (Theoretically) 99 m3/hThroughput** 35 kg/m3 (Cardboard) 2.7 t/hThroughput** 60 kg/m3 (Cardboard, paper) 4.7 t/hThroughput** 100 kg/m3 (Newspapers) 6.5 t/hSpecific Press Force 64.9 N/cm2
TECHNICAL DATA
CK International Ltd.38a Eglish RoadDungannonCo. TyroneNorthern Ireland BT70 1LA
T: +44 (0) 28 8775 3966F: +44 (0) 28 8772 [email protected]
Valid for all machine typesElectricity: 3 x 400 V, N, PE/50 Hz; Plug connector: CEE-5 x 32 A/6 h or direct connection;Fuse protection (on site): 32 A, slow; Control voltage: 24 V DC.
* Depending on bale length and material ** Relating to apparent weight
HORIZONTAL BALER TYPE AVOS 1211High efficiency in compact design
…
with oil-heating element
… with 400 kg wire coil holders
… with feeding conveyor to fill the baler evenly
and continuously… with large display to indicate the bale length
… with hook base frame
4Solid, torsion-resistant construction
4Individual equipment options
4Vertical 4-fold binding
4Compact design
Sub
ject
to
tec
hn
ical
ch
ange
s.
0
47_S
OR_
AVO
S121
1_G
B_0
2042
014
AVERMANN Maschinenfabrik GmbH & Co. KGLengericher Landstr. 35 n 49078 Osnabrück n Germany
Tel.: +49 5405 505-0 n Fax: +49 5405 6441 n [email protected]
Standard RAL-colours
Further RAL-colours on demand at extra charge.
RAL 1003
RAL 2000
RAL 3001
RAL 3020
RAL 5005
RAL 5007
RAL 5010
RAL 5015
RAL 5017
RAL 6002
RAL 6018
RAL 6024
RAL 7016
RAL 7032
RAL 7038
RAL 9002
The entry model with proven techniqueSpace saving with full efficiency: Deciding on the AVERMANN horizontal baler type AVOS 1211 you have latest-state-of-the-art technology in solid design. Thanks to the compact design only little space is needed.
Thus you profit from a ‘slim’ design with all advantages regard ing functionality and required quality. Moreover the horizontal baler type AVOS 1211 offers a fully auto-matic operation as well as the proven 4-fold binding.
nAVOS 1211 with conveyor belt feeding nHydraulic unit of the AVOS 1211
Sub
ject
to
tec
hn
ical
ch
ange
s.
0
47_S
OR_
AVO
S121
1_G
B_0
2042
014
AVERMANN Maschinenfabrik GmbH & Co. KGLengericher Landstr. 35 n 49078 Osnabrück n Germany
Tel.: +49 5405 505-0 n Fax: +49 5405 6441 n [email protected]
AVOS 1211-15/50
Machine length 5800 mm
Machine width 1800 mm
Machine height 3000 mm
Feeding hopper cross section 1200 x 1100 mm
Dead weight approx. 8500 kg
Bale size (W x H) 1100 x 700 mm
Bale length adjustable
Bale weight* up to 400 kg
Binding 4-fold vertically
Channel adjustment semi-automatically
Electricity 3 x 400 V, N, PE/50 Hz
Cycle time (empty) 34 sec
Idle speed capacity (theoretically) 99 m3/h
Throughput** 35 kg/m³ (cardboard) 2.7 t/h
Throughput** 60 kg/m³ (cardboard, paper) 4.7 t/h
Throughput** 100 kg/m³ (newspapers) 6.5 t/h
Specific press force 64.9 N/cm2
Press force 500 kN
Drive capacity 15 kW
Technical data
* depending on bale length and material, ** relating to apparent weight
The entry model with proven techniqueThus you profit from a ‘slim’ design with all advantages regard ing functionality and required quality. Moreover the horizontal baler type AVOS 1211 offers a fully auto-matic operation as well as the proven 4-fold binding.
nAVOS 1211 with conveyor belt feeding nHydraulic unit of the AVOS 1211
Sub
ject
to
tec
hn
ical
ch
ange
s.
0
47_S
OR_
AVO
S121
1_G
B_0
2042
014
AVERMANN Maschinenfabrik GmbH & Co. KGLengericher Landstr. 35 n 49078 Osnabrück n Germany
Tel.: +49 5405 505-0 n Fax: +49 5405 6441 n [email protected]
AVOS 1211-15/50
Press force 500 kN
Drive capacity 15 kW
Technical data
* depending on bale length and material, ** relating to apparent weight
You can get your horizontal baler type AVOS 1211 with:
THE ENTRY MODEL WITH PROVEN TECHNOLOGY
Press Force 500 kNDrive Capacity 15 kW
