Home Control Water Sensor
12
Home Control Water Sensor first steps
Transcript of Home Control Water Sensor
Home Control Water Sensor
first steps
2
Thank you for placing your trust in this devolo product.ons for later reference.
in damage.
Home Control online help to
l Water Sensor is com-eable parts!
basic requirements of therovisions of the Radio andesigned for use in the EU,luded.
Carefully read all instructions before setting up the device and store the instructi
Icons Very important note. Failure to observe this note may result
Important note that should be observed.
Background information and configuration tips for your device.
Intended useUse the Home Control Water Sensor as described in these instructions and in theprevent damage and injuries.
Except for occasional battery replacement, the Home Contropletely maintenance-free. The device contains no user-servic
CE conformityWhen used as intended, the product conforms to the directives 2014/53/EU, 2014/35/EU and the other relevant pTelecommunications Terminal Equipment Act (FTEG) and is dSwitzerland and Norway. A printout of the CE declaration is inc
3
devolo Home Controlf electrically operated indooreless standard.
e Home Control Central Unitater Sensor and all other
the my devolo app and at
t, please refer to the instal-ct's installation video online
hone/tablet)
Central Unit.
l Unit.
me Control devices, as well.
Home Control (also known as home automation) refers to the specific control ohousehold devices. The Home Control system from devolo uses the Z-WaveTM wir
A Home Control system requires a Z-WaveTM-compatible control unit such as thfrom devolo. Use its Home Control Portal to co-ordinate the Home Control WHome Control devices. You can access the Home Control Central Unit through www.mydevolo.com in a browser.
For more information about setting up the Home Control Central Unilation guide and/or Home Control online help. You can find the produat www.devolo.eu/home-control.
Accessing the Home Control Central Unit via the my devolo app (for smartp
Open the my devolo app � Home Control and select your Home Control
Accessing the Home Control Central Unit via web browser (PC/laptop)
At www.mydevolo.com � Home Control select your Home Control Centra
For more information on the control and configuration of all devolo Hoas application examples, please refer to the Home Control online help
4
5
The Home Control Water Sensor or leaking water. As soon asControl Water Sensor is idealachine or on an aquarium. It
or functions, refer to the
The Home Control Water Sensor is a water sensor and warns you about floodingwater touches the open metal contacts, the device triggers an alarm. The Homefor use in locations such as under a sink, under the supply valve of a washing mis equipped with an integrated LED and a release button.
For more detailed descriptions of the Home Control Water SensHome Control online help.
Release button(see rear side of the device)
Red LED
Sensor
Metal contacts
6
Batteries
peratures. Avoid direct
that are only in storageevice!
t. Using the battery in-
123(A) lithium battery. Forl online help.
Always keep batteries away from open flame and high temsunlight and radiated heat!
Always remove all batteries from battery-operated devices and are not in use. Old batteries can leak and damage the d
Do not use rechargeable batteries!
When inserting the battery, make sure the polarity is correccorrectly can damage the device!
The Home Control Water Sensor requires a commercially available CRinformation on replacing the battery, please refer to the Home Contro
7
Registering the Home Control Water Sensor on the control unit (e.g. devolo Home Control Central
ght or radiated heat!
Water Sensor, avoid posi-avoid interference sourc-nd especially metal objects
ce include electrical devicesat least around 50 cm away
e description in the section Unit and select Devices �ollow the instructions in the
Unit)
Only use the Home Control Water Sensor indoors.
Avoid placing the Home Control Water Sensor in direct sunli
To ensure the best possible wireless range for the Home Controltioning it behind objects that block the signal (attenuation) and es. Weak signals due to attenuation can result from furniture, plants awhich are located between the devices. Possible sources of interferensuch as a microwave or computer. In such instances, keep your device from the source.
� Place the Home Control Water Sensor close to the desired location of use.
� When you plug in the Home Control Central Unit from devolo, follow thdevolo Home Control on page 3 to call up your Home Control CentralAdd device (plus symbol) � devolo Home Control Water Sensor. FHome ControlPortal for logging into your Home Control Central Unit.
8
Installing the Home Control Water Sensor
l contacts as quickly asr example, on the floor,n video for the product
e sensor is displayed in theED flashes when the water
sor, adhere the tape to the Home Control Water Sensor
rface so that the blackhe device is installed.
apart the upper and lower release the housing compo-
In order for any unwanted leaking water to touch the metapossible, attach them directly to the potential leak point, founder a supply valve, etc. To do so, also refer to the installatioonline at www.devolo.eu/home-control.
� Before you attach the Home Control Water Sensor, first check whether thHome Control Portal. Then test whether the sensor is triggered and the Ltouches the metal contacts. If it is, the sensor is ready to operate.
� If using double-sided tape to fasten the Home Control Water Sencentre (below the release button) on the rear of the sensor and attach theto the desired location.
Install the Home Control Water Sensor on a flat and level surelease button on the rear of the sensor is depressed when t
� If you use screws to attach the Home Control Water Sensor, takehousing components of the sensor by pressing the tab down � in order tonents (from top to bottom).
9
water or power lines in
les into the desired location
� provided for this purpose
If installing on a wall using screws, make sure that no gas, the wall get damaged. There is a danger of electric shock!
� Based on the drill template on the lower housing component, drill hoand attach the lower component of the sensor using screws.
� Insert the bottom end of the upper housing component into the groovein the lower component.
1
10
� Then push the entire upper housing component (from bottom to top) onto the lower component as
rew the contact housing intoas quickly as possible, attacha supply valve, etc. Now the
Portal of the Home Controlof all devolo Home Controlntrol online help.
far as it will go.
Based on the drilling specifications for the metal contact, drill a hole and scplace. In order for any unwanted leaking water to touch the metal contacts these directly to the potential leak point, for example, on the floor, under Home Control Water Sensor is fully installed.
From now on, you can take electronic control using the Home ControlCentral Unit. For more information on the control and configuration devices, as well as application examples, please refer to the Home Co
1
2
11
Service and warranty
, please contact the supplierement or repair for you fromo.com/warranty.
on the devolo website.
with the household waste.int or at the retailer (e. g.
Warranty: 3 years If your devolo device is defective when first used or within the warranty periodwhere you bought the devolo product. The supplier will handle getting a replacdevolo. For the complete warranty terms, please visit our website at www.devol
* Detailed information about the actual costs of the telephone calls can be found
DisposalNeither the Home Control Water Sensor nor the battery may be disposed of Instead, you can return these at no charge at your municipal collection posupermarket, specialist shop).
Great Britain +44 203 0241 838 * supp
Portugal +351 707 200 896 * supp
Spain +34 902 887 682 * supp
Sweden +46 771 400 480 * supp
Other countries +49 241 70 525 18 * supp
devolo AGCharlottenburger Allee 6052068 Aachen – Germanywww.devolo.com 44
305/
0516
