Holophane T.MAX

8/19/2019 Holophane T.MAX

1/40

PATENT PENDING

REGISTERED EUROPEAN DESIGN

Del iver ing smoothert rans i t ion and adaptat ion


2/40

2 •

Tunnel Lighting turns Digital


3/40

• 3

With the revolution in Solid StateLighting it is imperative that as alighting manufacturer we are ready toevolve in order to take advantage ofthese technological improvements anddeliver solutions that add value andprovide efficiency as well as quality

of light.

T·MAX™ is the latest development thathas been created, by Holophane, usingthe latest in LED technology specificallyfor tunnels. The development has beenshaped using the latest is solid statelighting and features the most reliableand efficient LED’s on the market todeliver a long system life. With a varietyof mounting arrangements and opticalpackages T·MAX™ provides full flexibility

that enables it to adapt in all tunnel orunderpass environments.

During any product develop we arealways conscious of what the lightingplanners and users of the environmentrequire from the lighting solution. Thedemands of the Project Team begin atthe starting point when defining themain features of a new development.

We must understand what the marketrequires from a new product and wherethe opportunities for improvement exist.This is one example of how technicalexpertise and customer interactionplays an important part at Holophane:collaborating in applied research duringthe Product Development. This naturalinteraction with our customers providesthe platform for the developmentof a landmark evolution in tunnellighting technology.


4/40

4 •

Delivering smoother transition and adaptation


5/40

• 5

✓Modular design

✓One solution to maintain

✓ Thermal excellence

✓Optical performance

✓Energy efciency


6/40

6 •

PATENT PENDING

REGISTERED EUROPEAN DESIGN

SMART

& SIMPLE

Delivering smoother transition and adaptation

Up to

40.000lumens


7/40

• 7

Up to

6480combinations

T·MAX™ has been designed around the latest in Solid StateLighting, captured inside a housing that is guaranteed tolast for decades within tunnel environments. Our drive wasto ensure that today’s technology will still be applicable andeffective in the future. Under the extremes of actual workingenvironments the technology within T·MAX™ has beendesigned to deliver at up to 60ºC ambient temperatures.

At Holophane we have aspired to design lighting productsthat last for decades, under the harsh conditions experiencedin outdoor environments. Now we have combined scalabilityand technology, for one of the most challenging and toughest

conditions in industrial and road lighting applications.

T·MAX™ has been developed to deliver over 110lm/W in asmany as 72 combinations of lumen packages and photometricdistributions. The T·MAX™ concept provides a complete solutionfor tunnel applications in a variety of mounting options. Withthis wide range of possibilities we can now specifically addressevery installation scenario, faced by planners when workingon tunnel lighting projects.

Optics / light source

✓ Lumen package ranging from 6000lm to 40000lm✓ 9 Distribution options✓ Color temperature 4000k✓ Class I✓ Suitable for working ambients of – 40ºC to 60ºC✓ Designed to IP66✓IK 9 suitable for high pressure jet cleaning✓ Fixing System – lineal & projector✓ IP68 IP69K cable gland

Approvals

IP 66 light engines (EN 60529)IP 66 gear compartment (EN 60529)Ta -40˚C to +60˚C

For further information please visitwww.holophane.co.uk


8/40

8 •


9/40

• 9

Luminaire Designed to Achieve Ta +40ºC - Ambient


Performance Characteristics

The above is just an example of the lumen packages offered. For more information on the performance characteristics of T·MAX™, pleasecontact your Holophane representative.

Lumen maintenance values at 25ºC are calculated per TM-21 based on LM-80 data and in-situ luminaire testing.

In accordance with IESNA TM-21-11. Calculated Values represent time durations that exceed 6 times the IESNA LM-80-08 total test durationfor the driver under testing.

Note: Information correct at time of printing. The company reserves the right to modify the value at any time.

Configuration Nº LEDs Drive Power Delivered LPW at CCT (K) Projected Life of LED Module (L70B50)

Current (mA) Consumption (W) Lumens at 60ºC (lm) 60ºC (lm/W) (Hours)

.L064 10 450 53 c.6000 126 4.000 60,000

.L084 14 450 75 c.8000 111 4.000 60,000

.L104 16 450 85 c.10000 127 4.000 60,000

.L124 20 450 107 c.12000 117 4.000 60,000

.L164 26 450 139 c.16000 120 4.000 60,000

.L204 34 450 181 c.19000 110 4.000 60,000

.L314 52 450 279 c.31000 119 4.000 60,000

.L404 68 450 363 c.39000 110 4.000 60,000



.L064 8 600 59 c.6000 112 4.000 100,000

.L084 10 600 73 c.8000 112 4.000 100,000

.L104 13 600 95 c.10000 112 4.000 100,000

.L124 15 600 110 c.12000 112 4.000 100,000

.L164 20 600 147 c.16000 112 4.000 100,000

.L204 24 600 176 c.20000 112 4.000 100,000

.L314 40 600 286 c.31000 115 4.000 100,000

.L404 48 600 353 c.40000 112 4.000 100,000



.L064 8 600 59 c.6000 113 4.000 100,000

.L084 10 600 73 c.8000 113 4.000 100,000

.L104 13 600 95 c.10000 113 4.000 100,000

.L124 15 600 110 c.12000 113 4.000 100,000

.L164 20 600 147 c.16000 113 4.000 100,000

.L204 24 600 176 c.20000 113 4.000 100,000

.L314 40 600 286 c.31000 116 4.000 100,000

.L404 48 600 353 c.40000 113 4.000 100,000



10/40

10 •

Body

Enclosure

Thermal Control

Optical enclosure

Photometricdistributions

Sealed for Life

Fixing

Maintenance

Cable Plug & Play

Gear Box

Finished

Water IngressProtection

Impact Protection ElectricalSpecifications

Weight

Sleek profile manufactured from extruded anodized aluminium 6060 T6.

Flat tempered glass

Employing the 3 principles of thermal transfer: Conduction via the aluminium housing, Convection through theventilations channels and Radiation from all critical components. The luminaire also employs a Venturi effect which allowsair movement over the glass lens which self cleans and provides enhanced lumen maintenance. The driver chamber isexternal and housed away from critical LED components. This ensures that the complete system life is maximised.

PMMA Acrylic lens.

.L1L7 => Long 60º& Wide 45º/15º

.L7L0 => Long 70º& Wide 60º/15º

.L5L6 => Long 70º& Narrow 20º



.L6L6 => Long 70º& Wide Symmetric 40º

.L1L1 => Long 60º& Narrow Symmetric 20º

.L7L7 => Long 70º& Narrow Symmetric 30º

.L8L7 => Asymmetric 50º

Ventilation filter (GORE®) that regulates the pressure changes caused by temperature variations internaland external of the luminaire. Eliminates condensation and stresses caused by these enviornmentalchanges and ensures the IP seal is maintained for the life time of the product.

There are two types of mounting arrangements:.OL, OPL and .OSL => Adjustable brackets for the luminaire..ZL => Fixed mounting as Z for the luminaire and the driver box.

Access to the gear is on the side of the luminaire via 4 Allen metric (5) screws. Cover designed to ensure IP66 sealis maintained. Connection of luminaire via IP68 connectors. Earthing cable attached to the luminaire body.

Connection between the fixture and gear are achieved by providing an insulated EPR cable free from polyurethane halides which

is equiped with an IP68 connector for quick connection. The cable length is determined by the type of configuration selected.There are 2 types of cable:.FL3XX => 3-pin Cable.FL5XX => 5-pin Cable

The driver is supplied in a bespoke housing. Upon request, we can supply the gear on a separate‘gear-tray’ which excludes the bespoke gear box. This allows onsite installation flexibility.The gear housing is manufactured from extruded aluminum 6060 T6 anodized. Side coversare cast aluminum LM6 (EN AC-44100 AlSi12) low copper content IP66According to EN 60529 Degree of protection of the driver compartment (Gbox) => IP66

According to EN 62262, IK09 impact protection.

Input Voltage => 230V-240V / 50Hz - 60HzPower Factor > 0,9 at full loadTotal Armonic Distortion < 20% at full load.CPROTEC => At customer request an addition 10KV of surge protection can be supplied..CFUS => At customer request can be supplied with an additional overprotection through a fuse

TMX.L064/L084/L104/L124 => 5.3kgTMX.L164/L204 => 8.8kgTMX.L314/L404 => 17.6kgNote: without fixture kits or drivers.

GBOX.L064/L084/L104/L124 => 1.9kgGBOX.L164/L204/L314/L404 => 2.9kgNote: without fixture kits.

Technical Specifications Luminaire


11/40

• 11

Light Source

LED Technology

Lifetime

Operatingtemperature

Designed around the latest LED technology, with a luminous flux range from 6,000 lm to 40,000 lm and a colortemperature of 4,000K. (Neutral White, nw). CRI 70.Operating current 600mA Ta +40ºC.

Utilises 8 to 48 LEDS that are attached to the PCB in zero oxygen atmosphere. This process ensures LED robustnessand relaibilty. All LED modules are stress tested prior to integration into the luminaire - this ensures reliability andeliminates on site failures.

The lifetime of the T · MAX is 100,000 hours L70B50 Standard product => -40°C / +40°C.With option .D03=> -40°C / +60°C.

Technical Specifications LED

Compliance with standards:

UNE-EN 61547:2011Equipment for general lighting purposes - EMC immunity requirements UNE-EN 55015:2013Limits and methods of measurement of radio disturbance characteristics ofelectrical lighting and similar equipment UNE-EN 61000-3-2:2006Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits forharmonic current emissions (equipment input current


12/40

12 •

Modular installation Modular distribution

TMX.L064.L1L7.GBOX.LRD.FL509.C9.1OLZG


TMX.L064.L1L7.GTRAY.LRD.C9.1OLZG





13/40

• 13

T·MAX™ is a lighting solution that benefits all stakeholdersinvolved in tunnel lighting (drivers, maintainers, installers andoperators) due to the systems versatility and flexibility.

In addition to the inherent benefits of LED technology, the

added value of this luminaire is that it adapts to any type,shape or surface of tunnel. This is achieved by the modularityand flexibility of T-MAX. This modularity simplifies installationof the luminaire and the mounting configuration is performedin situ and is common to all luminaires installed.

Through specific anchor points designed into the luminairewe have guaranteed flexibility which allows it to be adaptedto any type of installation and can successfully be used in anyenvironment without impacting the optical performance ofthe system.

Modular

design

Modular assembly

Lineal and projection

lighting solution

These are just some of the possibilitiesoffered by the modularity of T·MAX™

Thin profileextreme adaptability

72mm


14/40

14 •

L e s s T e m p e r a t u r e

LONGEVITY

EFFICIENCY

COST SAVING

RELIABILITY

LIFETIME

Thermal excellence

Extruded housing with

vented channels.T·MAX™ utilises natural air movement to convect heat away from the criticalelectrical components. It takes advantage of the constant wind flow in the tunnelto manage the heat and is further improved by the Piston Effect (Bernoulli Effect).

Working ambient temperature

–40ºC a 60ºC.

During the design process we have also been able to accommodate the harshambient conditions of the Middle East. T·MAX™ has the option of a 60ºC ambient.

Soldering and verification

of the LED module.

An innovative soldering system that eliminates 100% of the bubbles created withconventional soldering systems used for LED modules developed by other luminairemanufacturers. This ensures we are able to deliver a ‘sealed for life’ solution.

PCB CHARACTERISTICSImpress circuit with a high thermal transference – Aluminium

Thermal material between the LED boards and aluminiumhousing ensures excellent thermal transfer.Revision of the welds by RX – 100%

100%

C O N N E C T

I O N

Long life


15/40

• 15

From the LED and driver onto thealuminium luminaire and gear housingrespectively.

Conduction

AirMovement

Piston Effect

Flow velocity Flow velocity

Increased fluid speed,decreased internalpressure.

V 1 V 2

P2


16/40


17/40

• 17

Hammer screws

An indispensable part of the modularityis the manner in which differentelements of the luminaire, gear box andfixing kits are anchoured together. Theunique design of our “hammer” screwsgive the luminaire the flexibility neededto respond to each application accordingto the tunnel.

Designed for dirtyenvironments

One of the factors faced by luminairesin a tunnel environment is dirt. T·MAX™is the only LED solution on the marketwere the thermal management of theluminaire is achieved primarily throughchannels that allow dirt and dust

particles to flow through the luminairehousing.

Accessible

Although the luminaires have beendesigned to ensure a ‘sealed for life’system the gear and luminaire areaccessible if an upgrade of the LEDmodules or drivers is required.

Product AProduct C

Portal

LexExit Luminance

T·MAX™T·MAX™

Portal

LexExit Luminance


18/40

18 •

Extreme light uniformity.

Each distribution utilises, different opticsCode Optical Distribution

.L1L7 Long 60º & Wide 45º/15º

.L7L0 Long 70º & Wide 60º/15º

.L5L6 Long 70º & Narrow 20º



.L6L6 Long 70º & Wide Symmetric 40º

.L1L1 Long 60º & Narrow Symmetric 20º


.L8L7 Asymmetric 50ºLumenpackage

ranging from6000lm to40000lm


19/40

• 19

Long 60º Narrow 20º ( .L1L5) Long 70º Wide 60º/15º (.L7L0) Long 70º Wide Symmetric 40º (.L6L6)

Long 60º Narrow 30º (.L1L6) Long 60º Wide 45º/15º (.L1L7) Long 60º Narrow Symmetric 20º (.L1L1)

Long 70º Narrow 20º (.L5L6) Long 70º Narrow Symmetric 30º (.L7L7)

Aerial backflowdisposal anddistribution

Distributionand bilateralsymmetricdistribution

Symmetricaldistributionand unilateraldistribution

Symmetricaldistributionand overheadmounting

Optical Distributions

Asymmetric 50º (.L8L7)

Elevation

Elevation

Floor plan

Elevation

Floor plan

Elevation

Floor plan

Elevation

Elevation

Floor plan


20/40

20 •


21/40

• 21

Lighting within tunnel environments is used 24 hours a day. Reducingenergy consumption and costs is critical. T·MAX™ is designed for maximumperformance and uniformity with minimum power consumption.

The choice of quality and cutting-edge LEDS attached to the optimal andefficient control of the emitted light and photometric flexibility, makes T·MAX™the most efficient solution for tunnel lighting.

The lowest energyconsumption

ConsumptionSystem failuresmaintenance

LifespanWarrantySecuritySaving

Investmentreturn

Technology

T·MAX™ T·MAX™ T·MAX™Energy savings Energy savings

These values are representative

Energy savings

100W VSAP/TMX LEDENERGY SAVINGSWATT/UNIT- 56W



Comparison HPS / LED

19% 36% 48%

HPS HPS HPSLED LED LED


22/40

22 •

A tunnel luminaire is under the toughest conditions: the gases emitted byautomobiles, oils and fuels, moisture and condensation, (marine, ice Potash)salts, dust in suspension, soot, detergents used for cleaning, constant vibrations(vehicle, weather conditions and effector Bernoulli).

We have paid particular attention to the materials used and its characteristics ofendurance, resistance to vibration and corrosion, ensuring a minimum influenceof the effects that cause such extreme conditions of work in the fixture.

Our total commitment to quality is reflected in that T·MAX™ is sealed for life, aminimum life of 100,000 h L70B50.

T·MAX ™ Low Risk SolutionRobustness of the Solution

Protective vents incorporatedPressure equalization to prevent the housing seals fromleaking

In T·MAX™ luminaire enclosure, the 60ºC temperature created a -100mbar pressuredrop in 3 minutes. In non vented housings, seals begin to leak around -70mbar.

The Gore® vent equalizes pressure and prevents the housing seals from leaking.

Without Vents

1 x Vent

Sealing Leakage

Sealedfor Life

Long lifecomponents

Q

Time [min]

P r e s s u r e C h a

n g e d p [ m b a r ]


23/40

• 23

Internal connectors - Robustness vs vibrations

For environments with high probability to suffer vibrations and air shocks allconnections have been made with a connector which is certificated (IRIS)Shock and vibration tests for equipment intended for use on railway vehiclesaccording to EN 61373:2010 (Railway applications, Category 1, Class B)- Voltage drop measurement according to EN 60947-7-1:2009, Clause 8.4.4- Contact disturbance / interruption test during the vibration strain: All through connections of the terminal blocks are monitored with an

oscilloscope with clamp-on ammeter for interruptions≥ 20 ns. Test current for the voltage interruption test: 1A DC

Simulated long-life testing at increased random vibration levelsaccording to EN 61373:2010, Clause 9Shock test “Single shocks 5 g, 30 ms” according to EN 61373:2010, Clause 10Functional random vibration test according to EN 61373:2010, Clause 8

Surge Protection as StandardA surge protection device is installed on the input current of the luminaire and acts asprotection in front of the equipment / Driver as well as the LED module.

The tests carried out in the laboratory in accordance with international standards,IEC 61643-1 “Surge protective devices connected to low-voltage ower distributionsystems” and IEC 60364-4-44 “Protection for safety – Protection against voltage

disturbances and electromagnetic disturbances” have demonstrated the effective-ness of the protector to prevent the destruction of the equipment/driver againsttransient overvoltages of up to 10 kA wave 820 (overvoltages induced and driven).

Soldering without oxygen In order to improve and to guarantee the quality and the long life of the productunder the toughest conditions of tunnel applications T·Max led are soldered to thepcb with a revolutionary method that improves the heat transfer and the vibrationresistance of other soldering methods.

Led soldered with voids 25% voidsNot acceptable

Led soldered with


24/40

24 •

Fixing 10L

Fixing 1OL-ZG

The drivers are mounted in a separate externalpower supply (max. distance 9m from the luminaire)facilitating access during maintenance phase.Adjustable luminaire. Zenith position focused on

the longitudinal axis of driveway or lane and lateralposition. Continuous (linear) or point lighting system.

The drivers are supplied in separate boxes so that theycan be mounted where deemed appropriate. Flexibilityin positioning the driver-box in the bottom wall and/ or grouping, facilitates maintenance. Adjustableluminaire. Zenith position focused on the longitudinalaxis of each driveway or lane and lateral position.Continuous (linear) or point lighting system.

Luminaire and driver-box integrated forming a lightspot. Adjustable light spot. Zenith position focusedon the longitudinal axis of each driveway or lane and

lateral position. Continuous (linear) or point lightingsystem.

Mounting options.


25/40

• 25

Fixing 1ZL

The drivers are mounted in a point external powersupply (max. distance 9m from the luminaire)facilitating access during maintenance phase. Noadjustable luminaire. Zenith position focused on

the longitudinal axis of driveway or lane and lateralposition. Continuous (linear) or point lighting system.

Luminaire and driver-box integrated forming a lightspot. No adjustable light spot. Zenith position focusedon the longitudinal axis of each driveway or lane andlateral position. Continuous (linear) or point lightingsystem.

Fixing 1ZL-ZG

The drivers are supplied in separate boxes so thatyou can mount them where required. Flexibility inpositioning the driver-box in the bottom wall and /or grouping, facilitates maintenance. No adjustableluminaire. Zenith position focused on the longitudinalaxis of each driveway or lane and lateral position.

Continuous (linear) or point lighting system.


26/40

26 •

Fixing 1ZL-ZG

Fixing 20L-ZG

Fixing 2OLP

Daytime lighting reinforcement. Luminaire and driver-box integrated forming a light spot. Adjustable lightspot. Zenith position focused on the longitudinal axis ofeach driveway or lane and lateral position. Continuous

(linear) or point lighting system.

Daytime lighting reinforcement. The drivers aremounted in a locker external power supply (max.distance 9m from the luminaire) facilitating accessduring maintenance phase. Adjustable luminaire. Zenithposition focused on the longitudinal axis of driveway orlane. Continuous (linear) or point lighting system.

Daytime lighting reinforcement. The drivers aremounted in a locker external power supply (max.distance 9m from the luminaire) facilitating access

during maintenance phase. Adjustable luminaire. Lateralposition focused. Continuous (linear) or point lightingsystem.


27/40

• 27

Fixing 2OLS

Daytime lighting reinforcement. The drivers aresupplied in separate boxes so that you can place whererequired. Flexibility in positioning the driver-box in thebottom wall and / or grouping, facilitates maintenance.

Adjustable luminaire. Zenith position focused on thelongitudinal axis of each driveway or lane. Continuous(linear) or point lighting system.

Fixing 2OLS-ZG

Daytime lighting reinforcement. The drivers aresupplied in separate boxes so that you can place whererequired. Flexibility in positioning the driver-box in thebottom wall and / or grouping, facilitates maintenance.Adjustable luminaire. Lateral position focused.Continuous (linear) or point lighting system.


28/40

28 •

Pack T·MAX™ Extreme flexibility.

T-MAX has been designed to allow installationwithin a number of applications. The lightingsystem comprises of 4 components:

• Sealed body with the LED Module• Gear + tray / Gear Box• Cable• Bracket

Gear Box. Also available as separate gear tray.

Connector

Fixing brackets

Gear Box Gear Tray


29/40

• 29

Configurator SERIE

TMX TMAX - Tunnel Luminaire Code LAMP_TYPE .L064 LED light engine producing c.6,000 lm with a nominal 4,000K colour temperature

.L084 LED light engine producing c.8,000 lm with a nominal 4,000K colour temperature


.L124 LED light engine producing c.12,000 lm with a nominal 4,000K colour temperature .L164 LED light engine producing c.16,000 lm with a nominal 4,000K colour temperature




Code OPTICAL_DISTRIBUTION .L1L7 Long 60º & Wide 45º/15º

.L7L0 Long 70º & Wide 60º/15º .L5L6 Long 70º & Narrow 20º



.L6L6 Long 70º & Wide Symmetric 40º



.L8L7 Asymmetric 50º

Code GEAR EQUIPMENT .GBOX With control gear box

.GTRAY* Without control gear box (only gear tray)

Code OPTIONAL: HIGH AMBIENT .D03 Suitable for a maximum ambient temperature of 60ºC

Code OPTIONAL: FUSE PROTECTION

.CFUS With fuse included

Code OPTIONAL: CONTROL GEAR .LRD LED dimmable DALI protocol

.ANF LED dimmable 1-10V

Code OPTIONAL: CABLE CONNECTION LENGTH** .FL309 3 core cable (90 cm) with IP connector

.FL318 3 core cable (180 cm) with IP connector.FL390 3 core cable (900 cm) with IP connector

.FL509 5 core cable (90 cm) with IP connector



Code COLOUR

.C9 RAL 9006

.RAL**** RAL colour (customer choise) Code FIXING METHOD (2)

.1OL* Kit 1 LED unit: Rotational Bracket for Luminaire

.1OLZG Kit 1 LED unit: Rotational Bracket for Luminaire & ZBracket for Gbox

.1ZL* Kit 1 LED unit: Z Bracket for Luminaire

.1ZLZG Kit 1 LED unit: Z Bracket for Luminaire & Z Bracket forGbox

.2OLZG Kit 2 LED unit: Rotational Bracket for Luminaire & ZBracket for GBox

.2ZLZG Kit 2 LED unit: Z Bracket for Luminaire & Z Bracket

for Gbox .2OPL* Kit 2 LED unit: Rotational Bracket for Luminaire

Perpendicular

.2OPLZG Kit 2 LED unit: Rotational Bracket for LuminairePerpendicular & Z Bracket for Gbox

. 2OSL* Kit 2 LED unit: Rotational Bracketfor Luminaire Side

.2OSLZG Kit 2 LED unit: Rotational Bracket for Luminaire Side

& Z Bracket for Gbox Code OPTIONAL: OVERVOLTAGE PROTECTION

SYSTEM.CPROTEC With overvoltage protection

TMX .L064 .L1L7 .GBOX .D03 .C-FUS .LRD .FL309 .C9 .1OL .C-PROTEC* This version will be available under special request after confirm the required gear-tray dimmensions** See the attached Configuration Matrix to select the option


30/40

30 •

GEARBOX SEPARATEDFROM THE LUMINAIRE

.L064 .L084 .L104 .L164 .L204 .L314 .L404

.1OLZG .FL309.FL318

.FL309

.FL318.FL509.FL518

.1ZLZG .FL309.FL318

.FL309

.FL318.FL509.FL518

.2OPLZG .FL309.FL318

.FL509

.FL518

.2OSLZG .FL309.FL318

.FL509

.FL518

GEARBOX FIXED ONTHE LUMINAIRE

.L064 .L084 .L104.L124

.L164 .L204 .L314 .L404

.1OLZG .FL302 .FL302 .FL504

.1ZLZG .FL302 .FL302 .FL504

.2OLZG .FL304 .FL504

.2ZLZG .FL304 .FL504

FL3 3 Core cable 02 = 25cm04 = 40cm

09 = 90cm18 = 180cm

FL5 5 Core cable 04 = 40cm09 = 90cm18 = 180cm

Configuration Matrix to select the cable and the fixing method.


31/40

• 31

Accessories T·MAX ™

Insulated aerial and flexible EPR cable free frompolyurethane halides which is equipped with an IP68connector 3 and 5 pins for quick connection

.OL Adjustable braket

Special retention system to prevent possiblemovement of the bracket once fixed which could becaused by vibrations or impact of water during thecleaning process.

Lockingsystem

Code Accessories

Kit 1 LED unit: Rotational Bracket for Luminaire

TMX.1OLZG Kit 1 LED unit: Rotational Bracket for Luminaire& Z Bracket for Gbox

TMX.1ZL (1) Kit 1 LED unit: Z Bracket for Luminaire

TMX.1ZLZG Kit 1 LED unit: Z Bracket for Luminaire& Z Bracket for Gbox

TMX.2OLZG Kit 2 LED unit: Rotational Bracket for Luminaire& Z Bracket for GBox

TMX.2ZLZG Kit 2 LED unit: Z Bracket for Luminaire& Z Bracket for Gbox

TMX.2OPL (1) Kit 2 LED unit: Rotational Perpendicular Bracket for Luminaire Perpendicular

TMX.2OPLZG Kit 2 LED unit: Rotational Perpendicular Bracket for Luminaire& Z Bracket for Gbox

TMX.2OSL (1) Kit 2 LED unit: Rotational Lateral Bracket for LuminaireTMX.2OSLZG Kit 2 LED unit: Rotational Lateral Bracket for Luminaire Side& Z Bracket for Gbox

TMX.FL302 3 core cable (25 cm) with IP connector










32/40

32 •

Dimensions

633 570

450

161

90

294

213110

140

100

60

Ø17

60

Ø11

72

633 278

204

90

660

18060

59,5 Ø8,5

72

.L164/.L204.GTRAY.1ZL

.L314/.L404.GTRAY.20SL


33/40

• 33

633 570

400

161

90

294

213200

140

100

60

Ø17

60

Ø11

72

633

204

211

UP

570

570

18060

59,5

Ø8,5

72

.L314/.L404.GTRAY.20PL

.L314/.L404.GBOX.2ZL-ZG


34/40

34 •

204

UP

211

390 278

370

18060

59,5 Ø8,5

72

UP332

83

278

90213

633

140

100

60

Ø17

60

Ø11

72

.L064/.L084/.L104/.L124.GBOX.1ZL-ZG

.L164/.L204.GBOX.1OL-ZG


35/40

• 35

83

90

UP

332

390 278

140

100

60

Ø17

60

Ø11

213

72

633

332 UP

570

83

90

140

100

60

Ø17

60

Ø11

213

72

.L314/.L404.GBOX.2OL-ZG

.L064/.L084/.L104.GBOX.1OL-ZG


36/40

36 •

83

90

390278

140

100

60

Ø17

60

Ø11

213

72

210

83

90

278

72

633

140

100

60

Ø17

60

Ø11

213

210

.L064/.L084/.L104/.L124.GBOX.1OL

.L164/.L204.1OL


37/40

• 37


38/40

38 •


39/40

• 39


40/40

Holophane Europe Limited

Bond Avenue, Bletchley, Milton Keynes MK1 1JG United Kingdom

Telephone: +44 ( 0 ) 1908 649292 UK Fax: +44 ( 0 ) 1908 367618

International Fax: +44 ( 0 ) 1908 363789

E-mail: [email protected]

www.holophane.co.uk

6

Holophane T.MAX

Documents

Transcript of Holophane T.MAX