Holland College Trades Brochure 2012

T R A D E S A N D I N D U S T R I A L T E C H N O L O G Y

Aircraft Gas Turbine Engine Repair

and Overhaul Technology

Graduate opportunities for each program are identified with the GO! icon.

The Aircraft Gas Turbine Engine Repair and Overhaul Technology program follows the Canadian Council for Aviation and Aerospace (CCAA) outline for the Aircraft Gas Turbine Engine Repair and Overhaul Technician and is Canadian Aviation Maintenance Council accredited. Learn the techniques, procedures and the documentation requirements necessary to perform the disassembly, inspection, repair, reassembly and testing of the turbine engines used to power today’s aircraft.

Start: September Length: 10 months Location: Summerside Waterfront CampusCredential Issued: Certificate, Aircraft Gas Turbine Engine Repair and Overhaul Technician.

Develop a strong foundation of automotive technology skills through classroom, lab and shop activities. An automotive technician must be well versed in computers, mathematics, reading and communication skills along with skills specific to the trade.

Start: September Length: 32 months Location: Summerside Waterfront CampusCredential Issued: Diploma, Automotive Technician

Admission Requirements

• Grade 12 or equivalent with credits at or above the general level • A valid Class 5 driver’s license • Driver’s abstract • Attendance at an information session • Resumé

NOTE: Preference will be given to applicants with Grade 11 or 12 academic English, math and physics.

GO!Work in the automotive industry.

hollandcollege.com/autotech

Automotive Technology

hollandcollege.com/agtAdmission Requirements

• Grade 12 or equivalent • Academic Grade 11 or 12 math and physics

GO! Work either directly or indirectly in the aerospace industry.

GO!


Carpentry

In this program, you will be introduced to all aspects of the carpentry trade, and will acquire an understanding of how a building is structurally supported and protected from the elements. Through classroom, lab, and on-site training, you will be introduced to building layout, framing, roof system, interior and exterior finish. Safe operation of hand and power tools will be taught.

Start: September Length: 9 Months Location: Summerside Waterfront CampusCredential Issued: Certificate, Carpenter


• Grade 12 or equivalent with credits at or above the general level• Resumé

GO!Work with contractors and building supply yards, be self-employed.

hollandcollege.com/carpentry

Get the training you need to enter the diving industry as a surface supplied diver. The program is taught to Association of Diving Contractors International standards. ADCI certification cards are recognized throughout the world as being documents that attest to the training and experience level of commercial divers and ROV pilot/technicians.Start: September Length: 9 months Location: Marine Training Centre, Summerside Waterfront Campus Credential Issued: Certificate, Unrestricted Surface Supplied Diver


• Grade 12 or equivalent with credits at or above the general level with credits in Grade 11 and/or 12 math and English • Open Water Scuba Diving Certificate • Full commercial diving medical from an approved Hyperbaric Physician prior to the first day of class • Resumé

NOTE: Preference is given to applicants with a physics credit. This program includes a daily 3-mile run. The purpose is to assess the diver’s fitness to dive each day, improve cardiovascular fitness, and team building.

Commercial Diving

GO! Work in harbour infrastructure inspection, maintenance and repair; deep water drilling platform inspection, maintenance and repair; oil and gas pipeline infrastructure inspection, maintenance and repair; shipbuilding and ship repair; bridge inspection, maintenance and repair; search and rescue; Canadian Armed Forces; seafood harvesting and aquaculture; developing countries building ‘first time’ infrastructure; quality control and quality auditing companies; non-destructive testing companies.

hollandcollege.com/comdive


Systems used within facilities have grown from the basic electrical, power and lighting systems to include signal and alarm, emergency lighting, communications and energy management systems. At the same time, advancements in technology are having a major impact on automation and control. With this advancement and growth comes the demand for technical people to install, operate and maintain these systems.

There are two areas of specialization in this program. The Industrial Electrical Technician and the Electrical Construction Wiring specialization.

Electrical Technology

hollandcollege.com/electech

Start: September Length: Industrial Electrical Technician - 2 years Electrical Construction Wiring - 1 yearLocation: Summerside Waterfront Campus Credential Issued: Diploma, or Certificate, Electrical Construction Wiring

Admission Requirements: Electrical Construction Wiring • Grade 12 or equivalent with credits at or above the general level • Resumé

Admission Requirements: Industrial Electrical Technician• Grade 12 academic • Resumé

NOTE: For this profile, preference will be given to applicants with academic English, math and physics.

GO! Work in manufacturing, processing, construction, marine, sales, service industries, engineering sector, Canadian Armed Forces.

Electromechanical TechnologyThe Electromechanical Technology program trains you to install, maintain, troubleshoot, and repair complex industrial equipment. There is an increased need in industry for technicians with cross-disciplinary skills in the areas of electrical and mechanical technology. The curriculum includes hands-on training in the areas of electronics, microprocessors, electrical control, industrial mechanics, hydraulics, pneumatics, programmable logic controllers, mechatronics and many other components and processes directly related to electromechanical technology.

hollandcollege.com/electrotech

Start: September Length: 2 years Location: Summerside Waterfront Campus Credential Issued: Diploma, Electromechanical Technician


• Academic Grade 12 • Resumé

NOTE: Preference will be given to applicants with academic Grade 12 math and Grade 11 or 12 physics.


Learn how energy is generated, distributed and consumed and how we need to make smart choices to ensure a sustainable flow of energy while maintaining our lifestyle. If you are interested in equipping yourself with the knowledge and skills to make a difference in the way we use energy to ensure sustainability of the planet this program is the place to start.

Start: September Length: 2 years Location: Prince of Wales CampusCredential Issued: Diploma, Energy Systems Engineering Technology


• Academic Grade 12 • Resumé

NOTE: Preference will be given to applicants with academic Grade 12 math and Grade 11 or 12 physics.

Graduates may find employment in design, sales, technical support or installation for energy equipment manufacturers, dealers or installers; energy management companies; engineering and architectural firms; general contractors; energy site developers; energy intensive industries; municipalities; and real estate development.

hollandcollege.com/esetech

Energy Systems Engineering Technology Heating, Ventilation and

Air Conditioning

Technology

Develop the skills and knowledge to be successful in many aspects of the HVAC trade including electrical and control systems, installation and servicing of basic heating, ventilation, air conditioning and refrigeration systems for residential and commercial application.

Start: September Length: 2 years Location: Summerside Waterfront CampusCredential Issued: Diploma, HVAC Technician


• Grade 12 or equivalent with credits at or above the general level • Resumé

NOTE: Preference will be given to applicants with academic math and physics.

GO!Work in mechanical contracting, wholesale and retail sales, equipment manufacturers, design consultants, and preventative maintenance.

hollandcollege.com/hvac

The Heritage Retrofit Carpentry program trains carpenters to respond to the need to restore heritage buildings and other older buildings while achieving energy efficiency. By preserving and restoring heritage buildings we can secure the future of these culturally important struc-tures by achieving a sustainable level of energy efficiency while providing comfort for occupants. If you are interested in working with wood while learning about energy efficient renovation and building history, this is the program for you. Students who complete the nine-month program may be eligible for apprenticeship credit.

Heritage Retrofit

Carpentry

hollandcollege.com/heritage

Start: September Length: 9 months Location: Prince of Wales Campus Credential Issued: Certificate, Heritage Retrofit Carpentry


• Graduation from a college- level carpentry or wood manufacturing program or equivalent, or completion of Block 1 Apprenticeship, or equivalent experience • Resumé GO!Work in building

construction, building supply yards, custom woodworking shops, be self-employed.


Outdoor Power Equipment

Learn how to service and repair a wide variety of equipment such as motorcycles, ATVs, snowmobiles, lawn and garden equipment, chain saws and generators. If you have an interest in working on small engines and mechanical and electrical systems you will enjoy this program.

Start: September Length: 9 months Location: West Prince CampusCredential Issued.: Certificate, Outdoor Power Equipment Technician


• Grade 12 or equivalent with credits at or above the general level • A valid Class 5 driver’s license • Driver’s abstract• ResuméNOTE: Preference will be given to applicants with Grade 11 or 12 English, math and physics. Outdoor Power Equipment is a provincially designated trade that leads to a Provincial Certificate of Qualification as an Outdoor Power Equipment Mechanic (also known as Small Engine Repair Mechanic). Students who successfully complete this program may be eligible to challenge the first block exam and get credit hours towards their apprenticeship. Students who are interested in becoming a motorcycle mechanic may be able to apply some of the time from this course toward challenging the Interprovincial Red Seal in Motorcycle Mechanic.

GO!Work with equipment dealers, independent service shops, equipment rental firms, golf courses, authorized service depots, or be self-employed.

hollandcollege.com/outpower

Plumbing

The Plumbing program will prepare you to enter the field with nationally identified skills for piping occupations. The program allows for specialization in installing process pipe and tubing, natural and liquefied gas, plumbing, heating and instrumentation and fire sprinkler and standpipe systems.

Start: September Length: 9 months Location: Georgetown Centre Credential Issued: Certificate, Plumber


• Grade 12 or equivalent • Resumé

NOTE: Preference will be given to applicants with Grade 11 or 12 physics.

GO!Work with mechanical contracting companies, heating contractors, plumbing companies, vacuum system installers, irrigation system installers, natural gas utility companies, propane gas companies, sewer and water utilities, plumbing and heating services, water pump installers, hardware sales, water treatment systems installers.

hollandcollege.com/plumb

Precision Machinist

Precision Machinists are in demand across the world to produce accurately machined parts that could be used for aerospace, agricultural or general manufacturing applications. This program gives you a variety of machining skills on up-to-date equipment to an industrial level of performance. This program readies you to enter the field as apprentice machinist, tool and die maker, mold maker, pattern maker, machine operator or quality control personnel.

Start: September Length: 9 months Location: Summerside Waterfront Campus Credential Issued: Certificate, Machinist

Admissions Requirements


GO!Work in production machine shops, machine repair shops, aerospace/aviation shops, farm equipment dealers, heavy equipment companies, shipyards, electrical generation facilities.

hollandcollege.com/presmach


Power Engineering

Steamfitters and pipefitters install, alter, maintain and repair piping systems that convey low and high pressure steam, hot water, air, fuel gasses, fuel and finely divided solids. This program provides you with nationally identified skills training to prepare for a career in this field.

Start: September Length: 9 months Location: Georgetown Centre Credential Issued: Certificate, Steamfitter/Pipefitter


• Grade 12 or equivalent at or above the general level • Resumé NOTE: Preference will be given to applicants with Grade 11 or 12 physics.

Steamfitting/Pipefitting

The Power Engineering program prepares you to take responsibility for the safe and efficient operation and maintenance of boilers, turbines and refrigeration or air conditioning in commercial or industrial buildings.

Start: September Length: 9 months Location: Marine Training Centre, Summerside Waterfront CampusCredential Issued: Graduates are eligible to apply for certification by the Provincial Department of Labour. Certificates range from fourth to first class. Certificates are inter-provincial and are recognized across Canada.


• Academic Grade 12 or equivalent • Resumé

NOTE: Emphasis is placed on abilities in math and physics.

GO!Work in power plants, waste treatment plants, wind power sites, refineries, chemical plants, food processing plants, large building complexes, and other industries that utilize large industrial equipment.

hollandcollege.com/powereng

GO!Work in thermal and hydro power plants, mines, chemical and industrial plants, petroleum refineries, pulp and paper mills, dairies, schools, apartment and office buildings, hospitals, shopping malls, laundries, ships, shipyards and oil drilling platforms.

hollandcollege.com/steampipe


Welding Fabrication

Train to be a Welder or Metal Fabricator. The Welder profile takes a broad approach to the welding fabrication industry, providing skills in the layout, fabrication, assembly and erection of metal framework and miscellaneous items by cutting, forming and welding. You will also be trained in the use of stationary power equipment such as press-break, shear and rolls.

The Metal Fabricator profile teaches layout, fabrication, assembly, and erection of metal frameworks and structures. You will also be trained in both non-destructive and destructive inspection methods. You train on Computer Numeric Controlled equipment such as press-break, shear, plasma cutting table and Auto-CAD. Students in this area of study train to the Red Seal standard for the designated trade of Metal Fabricator.

Start: September Length: 2 years, 7 months; Location: Georgetown Centre Credential Issued: Diploma, Welder



NOTE: Preference will be given to applicants with Academic Grade 11 or 12 English, Math and Physics. Related courses and work experience will enhance your application. GO!Work in construction industries;

fabrication, assembly and maintenance shops; pulp and paper mills; shipyards; offshore construction and maintenance; be self-employed.

hollandcollege.com/weldfab

The Welding Level 1 program prepares you with the basic skills and knowledge you require to gain employment in the welding industry. When you graduate, you may choose to pursue further training opportunities such as apprenticeship training or transfer into the second year of the Welding Fabrication program in Georgetown.

Welding Level 1

Start: September Length: 9 months Location: West Prince Campus Credential Issued: Certificate, Welding Level 1



NOTE: Preference will be given to applicants with Academic Grade 11 or 12 English, math and physics. Related courses and work experience will enhance your application.

GO!Work in construction industries; fabrication, assembly and maintenance shops; pulp and paper mills; shipyards; offshore construction and maintenance; or they may be self-employed.

hollandcollege.com/weld1


The global market for wind energy is expanding faster than any other source of electric energy. Wind energy is a sustainable form of energy. It does not use fuel, and does not produce greenhouse gas. If you are interested in renewable energy technologies, like working outdoors, and aren’t afraid of heights, this may be the program for you!Start: September Length: 10 months Location: Summerside Waterfront Campus Credential Issued: Certificate, Wind Turbine Technician


• Grade 12 or equivalent • A completed Medical form• Valid Class 5 driver’s license • Drivers abstract • Resumé

NOTE: Preference will be given to applicants with Grade 11 or 12 physics. For more details about admission requirements, visit the website. You must be in excellent physical condition as determined by a thorough medical examination and be able to participate in strenuous physical activity on elevated work platforms in adverse weather conditions.

GO!Work as a maintenance technician or wind turbine constructor, or with wind turbine manufacturer.

Wind Turbine Technician

hollandcollege.com/wind

Wood Manufacturing - Cabinetmaking

Start: September Length: 9 months Location: Summerside Waterfront CampusCredential Issued: Certificate, Wood Manufacturing/Cabinetmaking Technician

Admission Requirements• Grade 12 or equivalent with credits at or above the general level • Resumé

NOTE: Applicants must be physically capable of meeting the demands of this industry.

GO!Work in cabinetmaking, architectural millwork, wood product manufacturing, furniture manufacturing, restoration, design operations, or may choose self employment.

hollandcollege.com/wood

Get the knowledge and skills necessary to enter the wood manufacturing and cabinetmaking area of the construction industry. In this program, you will learn the technology and skills involved in the manufacture of cabinets, architectural millwork, and furniture, and receive training in modern manufacturing techniques. By the time you graduate, you will be familiar with the setup and operation of woodworking machinery and equipment, breakout of lumber and panel components, laminating, veneering, machining, sanding, assembly and finishing.

Degree Pathways:

A great blend of college

and university

Degree pathways such as articulation agreements and transfer credits give you the opportunity to begin your studies at one institution and finish at another. Holland College has more than 150 agreements with universities and other post-secondary institutions across Canada, in the U.S. and overseas. There are a variety of joint applied degree programs and 2+2 programs that enable you to earn a university degree in as little as two years after you have your Holland College diploma, along with other agreements that can lead to certifications.

On the job training and internships give you the opportunity to experience real day to day operations in your area of study. You get to use the skills and knowledge that you’ve acquired, and to interact with staff members on the work site. Students must complete their OJT or internship requirements in order to graduate.

On The Job Training



Accreditation

Apprenticeship Training

Apprenticeship training begins after you finish your program at Holland College and are working full-time with a suitable employer. When you are working with a suitable employer, you will register as an apprentice, and Apprenticeship PEI will give you credit for the hours earned and block exams passed while you were at Holland College. Each trade has a certain number of hours that an apprentice must complete before he or she can take block training and move to up to the next level. Once you have completed the required number of blocks and worked the required number of hours for your trade, you can earn your Interprovincial Red Seal by completing an exam. An Interprovincial Red Seal, which is the mark of excellence for your chosen trade and the designation most employers will ask for, gives you the ability to work anywhere in Canada. The most successful path to an Interprovincial Red Seal begins with a full-time Holland College program.

For more information about apprenticeship training in P.E.I., visit apprenticeship.pe.ca. This information pertains to P.E.I. only. For apprenticeship in other provinces, visit the apprenticeship branch of the provincial government for that province.

Accredited programs are recognized across Canada as having met national academic standards. If you are planning to work elsewhere in Canada, a diploma from a nationally accredited program will ensure that you receive full credit for your training regardless of where you settle.

Summerside Waterfront

Campus (SWC)

Marine Training Centre (MTC)

This state-of-the-art facility houses the labs, workshops and classrooms for most of the college’s Industrial Trades and Technology programs, as well as a Computer Information Systems program and a Legal Administration program.

Part of the Summerside Waterfront Campus, this centre has been providing Transport Canada approved training to the marine industry for more than three decades. The centre offers a full range of certification, from deckhand to master mariner, as well as two full-time programs, Commercial Diving and Power Engineering. At its peak, it employs up to 25 staff and has an average of 800 full-time and part-time students.

Georgetown Centre (GC)

The Georgetown Centre houses the college’s Welding Fabrication, Plumbing, and Steamfitting/Pipefitting programs.


Prince of Wales Campus

For more information, contact:

Admissions - Holland College140 Weymouth StreetCharlottetown, PEC1A 4Z1

Toll Free: 1-800-446-5265Tel: (902) 629-4217E-mail: [email protected]

hollandcollege.com

This document is published for information purposes and outlines the intentions of Holland College in as timely a fashion as possible. Although this information has been prepared with care, Holland College accepts no responsibility for actions caused by misinformation. Holland College reserves the right to revise or cancel programs or courses, revise policies and procedures, change instructors and alter fees and charges as Holland College deems necessary without notice.

ISO 9001:2008 CERTIFIED 2012 08 22

The West Prince Campus is located in Alberton. The campus offers programs for the residents of the West Prince region of Prince Edward Island. Program offerings change depending on industry demand. The campus features a cafeteria, classrooms, workshops and several meeting rooms.

Located in downtown Charlottetown, the Prince of Wales Campus is home to most of the college’s programs. The campus includes the Charlottetown Centre, the School of Performing Arts, the Centre for Community Engagement, and the new $17 million Centre for Applied Science and Technology. The college’s residence, Glendenning Hall, is also located on the Prince of Wales Campus.

West Prince Campus (WPC)

Prince of Wales Campus (PWC)

Holland College Trades Brochure 2012

Documents

Transcript of Holland College Trades Brochure 2012