HMS- 10 SM Datasheet
-
Upload
gabriel-vieira -
Category
Documents
-
view
232 -
download
0
description
Transcript of HMS- 10 SM Datasheet
DIAMOND HMS-10
SINGLE MODE PC
Specifications subject to changewithout noticeBDD 1950044 05_14
APPLICATIONS
Telecommunications, CATV, LAN, MAN, WAN, Test & Measurement, Industry,Medical, Sensors
COMPATIBILITY
With all DIAMOND connectors with ∅2.5 mm ferrules and M9x0.5- threaded or BNC locking mechanism
DESIGN/MATERIALS
Ferrule: ∅ 2.5 mm, spring loaded (25 N), anti-rotation keyed, with air pressure relief guides Mating adapter: Copper-nickel alloy with rigid tungsten carbide sleeve
AVAILABLE AS
Terminated connector Connector set, (to be terminated with Diamond special equipment)
CONNECTOR TYPES AND DIMENSIONS(with threaded locking mechanism)
DIAMOND HMS-10 connectors 900 µm boot style
Available types: DIAMOND HMS-10 MINI PC
Ferrule material: Tungsten carbide with copper-nickel alloy insert External parts: Copper-nickel alloy
DIAMONDFiber Optic Components
CABLE ASSEMBLIES AND ADAPTERS
DIAMOND SA • Via dei Patrizi 5 • CH-6616 Losone - SwitzerlandTel. +41 91 785 45 45 • Fax +41 91 785 45 00 • e-mail [email protected]
www.diamond-fo.com
SPECIFICATIONS
SINGLE MODE 0° PC
* May be further limited by cable specifications
UNITS
Insertion Loss (IL)
Return Loss (RL)
Repeatability of IL
Service life
Operating temperature
Storage temperature
Strain relief (cable)
typ. 0.2 max. 0.5
typ. 45 min. 40
max. ±0.2
1000 mate/demate cycles
-40/+85*
-40/+90*
>200
dB
dB
dB
°C
°C
N
TEST CONDITIONS
IEC 61300-3-4; λ = 1300 nm
IEC 61300-3-6; λ = 1300 nm
IEC 61300-2-2; λ = 1300/1550 nm
According to field experience
(Signal interruption at 25 N)
DIAMOND HMS-10
DIAMOND HMS-10 connectors 1.6 mm - 3.0 mm boot style
Available types: DIAMOND HMS-10 /RG PC
ADAPTER TYPE AND DIMENSIONS
DIAMOND MMT-10 mating adapter
CONNECTOR TYPE AND DIMENSIONS (/B = BNC-bayonet locking mechanism)
DIAMOND HMS-10 /B (900 µm) and /BRG (3.0 mm) connectors boot style
Available types: DIAMOND HMS-10 /B PC DIAMOND HMS-10 /BRG PC
Ferrule material: Tungsten carbide with copper-nickel alloy insert External parts: Copper-nickel alloy
ADAPTER TYPE AND DIMENSIONS
DIAMOND MMT-10 /B mating adapter
NOTE Diamond`s standard boot colors are as follows: Yellow for SM PC
ORDER INFORMATION
Please refer to the part numbers provided in the separate P/N list. For assemblies or other configurations, please contact your nearest local Diamond representative or fill in the contact form available on the www.diamond-fo.com website.
Other versions available upon request