HLI-L240C-NON LED HIGHBAY LIGHT - Lighting and Power...

HLI-L240C-NONLED HIGHBAY LIGHT

240W LED Highbay Products Specification

FEATURES● Replace up to 600Watt Pulse start Metal Halid● Universal 120-277V● Mercury Free: no UV● Aluminum sheet housing; rust and corrosion proof;polyester powder coating

g y p

g; p ;p y p g● Polycarbonate diffusor with UV protector● Hook & cord out of the fixture for mounting convenience● 4KV surge protector inside of power supply● Occupancy and bi-level power supply compatible● LM-79/80 data available● 5 Year Limited Warranty

CONSTRUCTION● Fixture:Aluminium sheet housing polyester powder coating● Lens: High light transmittance polycarbonate● LEDs: Top grade LED, high-output,long-life; CREE,SEOUL,SAMSUNG and so on● Heat Sink: Aluminium plate attach to the Housing and LEDs to act the whole fixture as the heat sink system to

reduce LED heats and add to life.reduce LED heats and add to life.● LED Driver: IP65/ Constant current meets UL1310 UL 48 Class 1● Finish:White finish. Environmentally friendly polyester powder coatings● Mounting: Heavy duty cast aluminium hook for mounting convenience

Lighting and Power Technologies7101 Whisperfield Drive, Plano, TX 75024

Ph: 877-666-5267 Fax: 972-624-5800 Web: www.lightingandpowertech.com Email: [email protected]

HLI-L240C-NONLED HIGHBAY

SPECIFICATIONS ifi iItem No. Specificatio

InputInitial

EfficiencyInputCRICCT

Data

GeneralPerformance

250W

23310

91

120-277V/50-60HZ

75

5000K

PowerTHD

Driver TypeSurge

LuminaireDimension

Weight

Performance

Physical15.88"x15.88"x20.55"

20.9lbs (9.5kg)

4KV inside of Driver

50000HRS

≥0.95

≤15%

Constant Current / Class 1

WeightOperatingHumidity

CertificationEnviroment

Material

PHOTOMETRY

0 9 bs (9 5 g)

Rohs compliant

OperationCondition

-30℉～+130℉

≤95%

Certificate

ETL,cETL,DLC,FCC,LM79,LM80

Suitable for Damp Location

PHOTOMETRY



HLI-L240C-NONLED HIGHBAY

WIRINGWIRINGUniversal voltage driver permits operation at

100V to 277VAC, 50 or 60Hz except fixtures factory

ordered with a 120V photocell (/PC).

1. Connect the black fixture lead to the (L) LINE supply lead.

2. Connect the white fixture lead to the (N) COMMONsupply lead. Wiring diagram3. Connect the bare copper Ground wire from fixture to supply lead.3. Connect the bare copper Ground wire from fixture to supply lead.



HLI-L240C-STPLED HIGHBAY

LED Highbay Light / Microwave Sensor Function

FUNCTIONFUNCTIONIt offers 3 levels of light:100%-->dimmed light (10%,20%,30%,40%,50%optional)-->off; and 2 periods of selectable waiting time: motion holdtime and stanby period; selectable daylight threshold and freedom of detection area.

With sufficient natural light,the light does not swith on when presence detected

With insufficient natural light,the sensor switches onthe light automatically when person enters the room

Object left, light dims to 10%/20%/30%/40%/50%(optional) stand-by level after the hold-time

Light switches off automatically after the stand-byperiod elapsed.


WORKING AREAWORKING AREA

SETTINGS

Note: When you want to maintain dimming level for whole light the daylight sensorNote: When you want to maintain dimming level for whole light, the daylight sensorshould be set as disable.




TECHNICAL DATATECHNICAL DATA

WIRING CIRCUIT



HLI-L240C-CTNLED HIGHBAY

FEATURES Fixture with the 0-10V dimmable driver When the fixture connect with a 0-10V switches or smart controller, it can be dimmable continued



HLI-L240C-NON LED HIGHBAY LIGHT - Lighting and Power...

Documents

Transcript of HLI-L240C-NON LED HIGHBAY LIGHT - Lighting and Power...