HITACHI Projector LP-WU9100B Operating Guide...

1

DLP® Projector

LP-WU9100BUser's Manual (detailed) Operating GuideThank you for purchasing this projector.

Safety GuideWARNING

NOTE

WARNING

CAUTION

NOTICE

2

Introduction . . . . . . . . . . . . . . . 334

Setting up . . . . . . . . . . . . . . . . . 89

10131819

Remote control . . . . . . . . . . . 2121

23Power on/off . . . . . . . . . . . . . . 24

2424

Operating . . . . . . . . . . . . . . . . 252526

2730303134383939

4044

EASY MENU. . . . . . . . . . . . . . . 47PICTURE menu . . . . . . . . . . . . 48IMAGE menu . . . . . . . . . . . . . . 52INPUT menu . . . . . . . . . . . . . . 53SETUP menu . . . . . . . . . . . . . . 54SCREEN menu . . . . . . . . . . . . . 57OPTION menu . . . . . . . . . . . . . 58NETWORK menu . . . . . . . . . . . 62

Web Control . . . . . . . . . . . . . . . 65Maintenance . . . . . . . . . . . . . . 67

6768

Troubleshooting . . . . . . . . . . . 70707172

73 . . . . . . . . . . . . . 79

3

Introduction

NOTE

Checking the contents of packageContents of package User’s Manual

WARNING

4

Introduction

Part namesProjector

1927

23, 61

5AC 19

618

WARNING

CAUTION

5

Control panel and IndicatorsSTANDBY/ONINPUTAUTOASPECTLENS CENTERINGBLANKMENU

ENTEREXITLENS SHIFTFOCUSZOOMPOWERSTATUSLIGHTTEMP

Introduction

Part names (continued)

POW

ER

STA

TUS

LIG

HT

TEM

P.

6

Ports 13~17COMPUTER IN1COMPUTER IN2CONTROLHDBaseT/LANHDMI 1HDMI 2DVI-DSDI IN/OUTREMOTE CONTROL

12V OUTPUT (OPTION)

Introduction


LAN

IN OUTSDI

COMPUTER IN 2

REMOTECONTROL HDBaseT HDMI 1 DVI-D HDMI 2

CONTROL V H B/Cb/Pb G/Y R/Cr/Pr COMPUTER IN 1

7

Introduction


7056

NOTE

Remote control STANDBYONVOLUME + / -AV MUTECOMPUTER 1COMPUTER 2VIDEOLANUSB TYPE AUSB TYPE BHDMI 1HDMI 2Display PortHDBaseTSDIDIGITALFOCUS + / -LENS MEMORY SAVE / LOADSHIFTZOOM + / -GEOMETRYASPECTPICTUREFREEZEPbyPMAGNIFY ON / OFFMY BUTTON - 1 / 2 / 3 / 4MENURESETENTER

ID-1 / 2 / 3 / 4OSD MSGNETWORKINTERACTIVEINFO

INFO

NETWORK INTERACTIVE

8

Setting up

9

Installing the lens unit

Setting up

Positioning Precautions

270°

90°

0°180°

10

Setting up

Arrangement

Ⓗ × Ⓥ :ⓐ :

Projector top

Projector bottom

NOTE

11

Setting up

Arrangement (continued)

WARNING Install the projector where you can access the power outlet easily.

Do not subject the projector to unstable conditions.

Do not install the prothings.

Do not place the projector where any oils, such as cooking or machine oil, are used.

Do not place the projector in a place where it may get wet.

Do not block the ventilation inlet and ventilation outlet of the projector.

12

Setting up

Arrangement (continued)

ventilation.

Avoid placing the projector in smoky, humid or dusty place.

60

CAUTION

NOTICE

NOTE

13

Setting up

Connecting with your devices

Use only the appropriate accessories.WARNING

For a cable with a core at only one end, connect the end with the core to the projector.

CAUTION

COMPUTER IN1

About Plug-and-Play capability

NOTE

14

Setting up

Connecting with your devices (continued)Computer

LAN

IN OUTSDI

COMPUTER IN 2


CONTROL V H B/Cb/Pb G/Y R/Cr/Pr COMPUTER IN 112V OUTPUT(OPTION)

NOTE

15

Setting up

Connecting with your devices (continued)

Computer

Access point

External device

LAN

IN OUTSDI

COMPUTER IN 2



LAN

CAUTION

About HDBaseT™ connection

16

LAN

IN OUTSDI

COMPUTER IN 2



Setting up


VCR/DVD/Blu-ray DiscTM

player

HDMI

HDMI

・

NOTE

17

Setting up


LAN

IN OUTSDI

COMPUTER IN 2



SDI OUT

INFO

NETWORK INTERACTIVE

(Wired)Remote control

REMOTE CONTROL

SDI

NOTE

18

Using the security slot

WARNING

NOTE

Setting up

Security slot

CAUTION

19

Setting up

Installation of the projector

1. Installing the projector towards the screenScreen

2. Removing the mount cap on the projector

3. Selecting the correct input voltage depending on your area

4. Connecting the power cord to the projector

20

WARNING

NOTICE

turn on the power

LAN

IN OUTSDI

COMPUTER IN 2



Setting up

21

Installing the batteries

WARNING

Remote control

22

Remote control

Using the REMOTE ID function

61

INFO

NETWORK INTERACTIVE

ID ID

ID

NOTE

23

Remote control

About the remote control signal

61NOTE

0°

0°

m

24

Power on/off

ON

Turning on the power

Turning off the power

STANDBY

LAN

IN OUTSDI

COMPUTER IN 2



EXITMENULENSSHIFT

INPUT ASPECT BLANKLENS

CENTERINGAUTO

FOCUS ZOOM

12V OUTPUT(OPTION)

INFO

NETWORK INTERACTIVE

WARNING

58 58

NOTE

25

Operating

INPUT

INPUT

Selecting an input signal

LAN

IN OUTSDI

COMPUTER IN 2



EXITMENULENSSHIFT


CENTERINGAUTO

FOCUS ZOOM

12V OUTPUT(OPTION)

HDMI 1, HDMI 2, COMPUTER 1, COMPUTER 2, HDBaseT, SDI DIGITAL

INFO

NETWORK INTERACTIVE

Button Ports

HDMI 1 HDMI 1HDMI 2 HDMI 2

COMPUTER 1 COMPUTER IN1COMPUTER 2 COMPUTER IN2

HDBaseT HDBaseTSDI SDI

DIGITAL DVI-D

58NOTE

26

Operating

INFO

NETWORK INTERACTIVE

Selecting an aspect ratioASPECT

ASPECTNOTE

If there is no signal

LAN

IN OUTSDI

COMPUTER IN 2



EXITMENULENSSHIFT


CENTERINGAUTO

FOCUS ZOOM

12V OUTPUT(OPTION)

ASPECT

27

Operating

Adjusting the projector's angle, Lens Shift, Zoom, Lens Centering, and Focus

SHIFT

FOCUS ZOOM

SHIFTZOOM FOCUS

LENSSHIFT

FOCUS ZOOM

SHIFT

28

Operating

Horizontal and vertical lens shift

Moving the lens vertically

·NOTE

NOTE

29

Operating

Moving the lens horizontally

H H

·NOTE

Lens Memory

Load Memory

Save Setting

30

Operating

INFO

NETWORK INTERACTIVE

Using the automatic adjustment feature

LAN

IN OUTSDI

COMPUTER IN 2



EXITMENULENSSHIFT


CENTERINGAUTO

FOCUS ZOOM

12V OUTPUT(OPTION)

NOTE

Other buttons

OSD MSG

PICTURE

INFONETWORK

OSD MSG

PICTURE

INFO INFO

NETWORKNETWORK

31

Operating

GEOMETRYENTER

NOTE

GEOMETRY

Correcting the distortion

KEYSTONE: ENTER

ENTER

NOTE

INFO

NETWORK INTERACTIVE

GEOMETRY GEOMETRY

32

Operating

PERFECT FIT: ENTER

ENTER

ENTER

ENTER

Correcting the distortion (continued)

33

Operating

Correcting the distortion (continued)

SAVE:

LOAD:

NOTE

WARPING:

34

Operating

Using the EDGE BLENDING features

[1-

35

Operating

ENTER

36

Operating

ENTER

Input Image

Cropping

Input Image

Cropping

37

Operating

NOTE

38

Operating

Using the magnify featureMAGNIFY ON

MAGNIFY ON

MAGNIFY ON

MAGNIFY OFF

MAGNIFY ON NOTE

INFO

NETWORK INTERACTIVE

MAGNIFY ON/OFF

39

Operating

FREEZE

56

FREEZE

Temporarily freezing the screen

NOTE

AV MUTE

AV MUTE

Temporarily blanking the screen

CAUTION

INFO

NETWORK INTERACTIVE

INFO

NETWORK INTERACTIVE

FREEZE

AV MUTE

40

Operating

INFO

NETWORK INTERACTIVE

PbyP (Picture by Picture) / PinP (Picture in Picture)

70

NOTE

PbyP

PbyP

PbyP

PbyP

41

Operating

PbyP (Picture by Picture) / PinP (Picture in Picture) (continued)

Setting information

42

Operating

INPUT

Changing the picture input signal

2

PbyP (Picture by Picture) / PinP(Picture in Picture) (continued)

43

Operating

53 Changing the position of sub area

PbyP (Picture by Picture) / PinP (Picture in Picture) (continued)

NOTE

MY BUTTON 59 PbyP / PinP SWAP function

44

Operating

INFO

NETWORK INTERACTIVE

MENU

Using the menu function

MENU

In the EASY MENU

ENTER

ENTER

In the ADVANCED MENU

ENTER

MENU

ENTERRESET

LAN

IN OUTSDI

COMPUTER IN 2



EXITMENULENSSHIFT


CENTERINGAUTO

FOCUS ZOOM

12V OUTPUT(OPTION)

MENU

45

Operating

Using the menu function (continued)

MENUENTER

Indication in OSD (On Screen Display)

Indication Meaning

MENU

RESET

NOTE

46

Operating

Using the menu function (continued)

Containing items of each menu

Menu Items

EASY MENU 47

PICTURE 48

IMAGE 52

INPUT 53

SETUP 54

SCREEN 57

OPTION 58

NETWORK 62

47

EASY MENU

Item Description

ASPECT 52

KEYSTONE 54

PERFECT FIT 54

PICTURE MODE

49

®

ECO MODE 55INSTALLATION 55

RESET

LANGUAGE 57

ADVANCED MENU ENTER

EXIT ENTER

48

PICTURE menu

Item Description

BRIGHTNESS

CONTRAST

COLOR

TINT

SHARPNESS

DYNAMIC BLACK

49

PICTURE menu

Item Description

PICTURE QUALITY

PICTURE MODE

.

GAMMA

50

PICTURE menu

Item Description

PICTURE QUALITY

(continued)

COLOR TEMP

ENTER

51

PICTURE menu

Item Description

PICTURE QUALITY

(continued)

ACCENTUALIZER

HDCR

COLOR MANAGEMENT

MY MEMORY

MY BUTTON59

52

IMAGE menu

Item Description

ASPECT If there is no signal

OVER SCAN

V POSITIONRESET

H POSITIONRESET

H PHASE

H SIZE RESET

AUTO ADJUST

53

INPUT menu

Item Description

NOISE REDUCTION

COLOR SPACE

PbyP / PinP

PinP POSITION

3D FORMAT

3D EYE SWAP

3D DLP LINK

54

SETUP menu

Item Description

GEOMETRY CORRECTION

KEYSTONE

Correcting the distortion 31

32 33 .PERFECT FIT

Correcting the distortion 32

31 33 .WARPING

31 32EDGE BLENDING

34 ~ 37PATTERN

55

SETUP menu

Item Description

ECO MODE

CUSTOM POWER

PICTURE POSITION

・

INSTALLATION

56

SETUP menu

Item Description

STANDBY MODE

OSD MESSAGE

FREEZE

OSD MSG

OSD MSG

57

SCREEN menu

Item DescriptionLANGUAGE

MENU POSITION

START UP

TEMPLATE

ENTER

MY BUTTON59

58

OPTION menu

Item Description

AUTO SEARCH

DIRECT POWER ON

24

AUTO POWER OFF

CONTROL

Turning off the power 24

59

OPTION menu

Item Description

MY BUTTON

MY BUTTON 1 4 7

ENTER

ENTER

43

5151

51

MY BUTTON

49

57

60

OPTION menu

Item Description

SERVICE

ALTITUDE

LENS TYPE

61

OPTION menu

Item Description

SERVICE(continued)

INFRARED REMOTE

REMOTE ID

ID

INFORMATION

FACTORY RESET

62

NETWORK menu

56

NOTE

Item Description

NETWORK MODE

INFORMATION

NETWORK MODEDHCP

IP ADDRESS

SUBNET MASK

DEFAULT GATEWAY

DNS SERVER

MAC ADDRESS

NOTE

63

NETWORK menu

Item Description

SETUP

DHCP

IP ADDRESS

SUBNET MASK

DEFAULT GATEWAY

DNS SERVER

APPLY

NOTE

NOTE

64

NETWORK menu

Item Description

EXTERNAL CONTROL

AMX D.D.(AMX Device Discovery)

CRESTRON

EXTRON

65

Web Control

･ ®

®

®

®

NOTE

®

®

Web Control

66

Web Control

® ®

® ® ®

® ®

® 64®

NOTE

Example 192.168.1.10http://192.168.1.10/

57

NOTE

Login (Projector Web Control)

User namePassword

67

Maintenance

WARNING

Cleaning the ventilation inlet

TEMP.

68

Maintenance

Inside of the projector

Caring for the lens

Other care

69

WARNING

NOTICE

CAUTION

Caring for the cabinet and remote control

Maintenance

70

TroubleshootingWARNING

Related messages

DescriptionThere is no input signal.

The horizontal or vertical frequency of the input signal is not within the

An improper signal is input.

The button operation is not available.7

The installed lens is incompatible.

Troubleshooting

71

Troubleshooting

Regarding the indicatorTroubleshooting

POWER LED

STATUS LED

72

Troubleshooting

Regarding the indicator (continued)

LIGHT LED

TEMP. LED

NOTE

Resetting all settings

61

73

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects

Phenomenon Cases not involving a machine defect Reference page

○ ｜ 20

The electrical power cord is not plugged in. 19

The main power source has been interrupted during operation such as by a power outage (blackout), etc.

19

Signal source does not correctly work.–

The input changeover settings are mismatched. 25

The signal cables are not correctly connected.

The brightness is adjusted to an extremely low level.48

The computer cannot detect the projector as a plug and play monitor. 13

The BLANK screen is displayed.AV MUTE 39

74


The batteries in the remote control are near the end. 21

The ID numbers set in the projector and the remote control are different.

22

The FREEZE function is working.FREEZE 39

Color settings are not correctly adjusted.

COLOR SPACE setting is not suitable. 53

The brightness and/or contrast are adjusted to an extremely low level. 48

The projector is operating in Eco mode. 55

The light source is approaching the end of its product lifetime. –

The lens cover is attached. –

Either the focus and/or horizontal phase settings are not properly adjusted.

FOCUS + / -

The lens is dirty or misty.Caring for the lens 68

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

75


Flicker may appear on screen

The OVER SCAN is necessary.52

Excessive NOISE REDUCTION.53

The SAVING function is working.56

Troubleshooting


76


The SAVING function is working.

56

The SAVING function is working.56

The connected equipment may not be supported by HDBaseT. 15

This projector is compatible with 100BASE-T only –

–

–

Troubleshooting


77

Troubleshooting


–

–

–

Check if the extension connector is compatible with CAT5e.

HDBaseT

–

–

–

–

–


78

NOTE


POWER

Disconnect the LAN cable and check that the projector is working properly.

–

Troubleshooting


81

End User License Agreement for the Projector Software

Trademark acknowledgment

®

® ® ® ®

®

HITACHI Projector LP-WU9100B Operating Guide...

Documents

Transcript of HITACHI Projector LP-WU9100B Operating Guide...