HIP SERIES - PDC · Opal V LIETIME L90/B10 45,000 hours @ 400mA L70/B10 123,000 hours @ 400mA...
Transcript of HIP SERIES - PDC · Opal V LIETIME L90/B10 45,000 hours @ 400mA L70/B10 123,000 hours @ 400mA...
HIP SMSurface mounted profiles
IP22 LEDTRIDONIC LLE LED
IP22 LEDTRIDONIC LLE LED
HIP profiles
HIPSERIES
Light Nation, in partnership with Darkon, is proud to announce the manufacture of HIP Profiles in New Zealand. These profiles have a light tray which utilises a built-in reflector for efficient light output and is available in a range of outputs to suit your project requirements. With manufacturing locally in New Zealand, these profiles are fully customisable and have reduced lead times.
LENSOpal V
LIFETIMEL90/B10 45,000 hours @ 400mAL70/B10 123,000 hours @ 400mA
COLOURWhite / Black
LAMPTridonic stark LLE24 HE
COLOUR TEMP3000K / 4000K
DIMMINGDali / Switched
WATTAGE/ LUMEN P/ MTRHE 350mA: 16.5W p/mtr 1,646lm p/mtrHE 400mA: 19.0W p/mtr 1,880lm p/mtrHE 450mA: 21.2W p/mtr 2,085lm p/mtrHE 500mA: 23.7W p/mtr 2,288lm p/mtr
MOUNTINGSurface mount / Suspended
*see next page for products where 5 days manufacturing lead time applies.
76
69
WARRANTYYR
PU
B01
18
WWW.LIGHTNATION.CO.NZ
#LIGHTNATIONfind us: [email protected]
We have a large selection of profile light specifications that can be manufactured within 5 working days.
LENGTH MOUNTING COLOUR CURRENT DIMMING
(e.g. HIP 1025 S B 40 3 S )
HIP 1025 mm Surface Mount Black 400mA 3000K Switched
1235 mm SUspended White 500mA 4000K Dali
1585 mm
1795 mm
2145 mm
2565 mm
If your requirements are outside of these specifications, contact us to discuss lead times.
*For dimming options, Switched will always be 400mA and Dali will always be 500mA.
COLOUR TEMPERATURE