Hip Arthroscopy AUSTRALIA & NEW ZEALAND Sports Medicine€¦ · 0295-720-000 Hip Arthroscopy Access...

AUSTRALIA & NEW ZEALAND

Sports MedicineProduct Guide

2nd Edition

Hip Arthroscopy | Shoulder Arthroscopy | General Arthroscopy

Sports. Medicine. Innovation.

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

A surgeon must always rely on his or her own professional clinical judgement when deciding whether to use a particular product when treating a particular patient. Stryker does not dispense medical advice and recommends that surgeons be trained in the use of any particular product before using it in surgery.

The information presented is intended to demonstrate the breadth of Stryker product offerings. A surgeon must always refer to the package insert, product label and/or instructions for use before using and Stryker product. Products may not be available in all markets because product availability is subject to the regulatory and/or medical practices in individual markets. Please contact your Stryker representative if you have questions about the availability of Stryker products in your area. Products referenced with ™ designation are trademarks of Stryker. Products referenced with ® designation are registered trademarks of Stryker.

Copyright © 2015. Stryker Printed in Australia.

Literature Number: 2000-223-000SportsMedSSP

Stryker Australia 8 Herbert St, St Leonards NSW 2065 T: 61 2 9467 1000 F: 61 2 9467 1010 Stryker New Zealand 515 Mt Wellington Highway, Mt Wellington Auckland T: 64 9 573 1890 F: 64 9 573 1891

www.strykermeded.com

We Are Stryker

At Stryker, we believe results speak louder than words. Since the founding of Stryker Corporation in 1941, this philosophy has made us a leader in the worldwide medical technology market and placed us at the forefront of medicine’s most promising solutions. Today, we are one of the preeminent medical products and services companies in the world. Stryker delivers results through a wide range of capabilities including joint replacements, trauma, spine and micro implant systems, orthobiologics, powered surgical instruments, surgical navigation systems, endoscopic products as well as patient handling and emergency medical equipment.

Headquartered in Kalamazoo, Michigan, Stryker operates through 37 manufacturing and distribution divisions that employ approximately 25,000 people around the world. Our company is one that sets high standards. We continually strive to achieve superior clinical results. we push the frontiers of medical research with uncompromising clinical integrity. We measure our success by our ability to partner with respected medical professionals – to help millions of people, around the world, lead more active and more satisfying lives. At Stryker, we do more than make commitments, we deliver results.

Stryker offers a wide range of innovative sports medicine implants, instrumentation, visualisation, resection and biologic solutions. Our solutions focus on minimally invasive and open approaches to the knee, shoulder, hip and small joints. Stryker Sports Medicine delivers a comprehensive and innovative portfolio of products and business solutions to help our customers excel, both clinically and operationally.

The Stryker Sports Medicine business unit is excited about the recent acquisition of Pivot Medical. Pivot, a market leader in hip arthroscopy, brings advanced hip-specific technology that complements and enhances the Stryker Sports Medicine platform.

Stryker South Pacific sell and distribute a range of products in the Australian and New Zealand markets and itself is certified to the ISO 9001:2008 Quality Management System.

Please visit www.strykermeded.com for more information.

AUSTRALIA & NEW ZEALAND

Sports MedicineProduct Guide 2nd Edition

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Table of ContentsHip Arthroscopy

5 Complete Hip Arthroscopy Kit

5 Instrumentation Kits

6 Access

6 Biters

6 Graspers

6 Suture Manipulation

7 Rigid Instruments

7 Probes

7 Microfracture

7 Accessories

8 Visualisation

8 IDEAL EYES Autoclavable Arthroscopes

8 Access

9 TransPort Hip Access System

9 TransPort Cannulas

10 Pivot Samurai Blades

10 Flowport II Cannulas with Obturator and Adaptors

11 Pivot Portal Entry Kit

11 Stick

11 TransPort Obturator

11 Capsule Punch

12 Pivot NanoPass Suture Management System

13 Pivot NanoTack Flex Suture Anchor System

14 Pivot CinchLock SS Knotless Anchor System

15 Pivot CinchLock Flex Anchor System

16 Pivot Phoenix Microfracture System

17 SlingShot Single Portal Capsule Restoration

Shoulder Arthroscopy

20 ICONIX All Suture Anchor System

20 ICONIX Anchors

21 ICONIX Guides

21 ICONIX Obturator

21 ICONIX Drills/Awl

21 Tray

22 ICONIX TT All Suture Anchor System

23 ReelX STT Knotless Anchor System

24 Knotilus Knotless Anchors

24 Knotilus Implants

24 Knotilus Instrumentation

25 PEEK Zip Anchors

25 PEEK IntraLine Sulture Anchors

25 PEEK IntraLine Punch-Tap

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

26 Titanium IntraLine Suture Anchors



29 Pivot CinchLock Flex Knotless Anchor System

30 VersiTomic G-Lok Suspensory Fixation System

30 VersiTomic G-Lok Implants

30 VersiTomic Drills/Instruments

31 Champion Shoulder Instrumentation Set

31 Champion Instruments

32 Champion Sliders

33 Champion Suture Passers

34 Champion Slingshot Suture Passers

35 MicroFX Osteochondral Drilling System

General Arthroscopy

39 ICONiX All-Suture Anchor with Needles

40 Conquest Manual Instruments

40 Punches

41 Scissors

41 Graspers

41 Probes

41 Sterilisation Trays

42 Champion Small-Joint Instruments

42 Small-Joint Instruments

43 Dri-Lok Cannulas

43 Standard 75 mm Length Dri-Lok Cannula

43 Long 90 mm Hip Length Dri-Lok Cannula

43 Accessories

44 Force Fiber Sutures

45 XBraid TT Suture (tape)

General Information

49 Terms & Conditions of Supply

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip Arthroscopy5 Complete Hip Arthroscopy Kit

5 Instrumentation Kits

6 Access

6 Biters

6 Graspers

6 Suture Manipulation

7 Rigid Instruments

7 Probes

7 Microfracture

7 Accessories

8 Visualisation

8 IDEAL EYES Autoclavable Arthroscopes

8 Access

9 TransPort Hip Access System

9 TransPort Cannulas

10 Pivot Samurai Blades

10 Flowport II Cannulas with Obturator and Adaptors

11 Pivot Portal Entry Kit

11 Stick

11 TransPort Obturator

11 Capsule Punch

12 Pivot NanoPass Suture Management System




16 Pivot Phoenix Microfracture System

17 SlingShot Single Portal Capsule Restoration

18 Injector II Capsule Restoration

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

5www.strykermeded.com

Hip

Art

hro

sco

py

Complete Hip Arthroscopy KitAccess and Instrumentation

• Includes access and instrumentation products:• Access products: scopes, cannulas, & bridge system• Instrumentation products: punches, graspers, & suture passers

• Hip Access Set was designed to help reduce the time and effort necessary to access and treat the hip joint. Portal exchange is smooth and seamless when you employ the fully cannulated cutter cannula-and-bridge system.

• Hip Instruments are a comprehensive kit of precision tools that assist in tissue resection, grasping, microfracture and suture-management.

• The angled designs of our tools optimise joint access and allow curvature around the femoral head for pinpoint control.

• Choice and variety of tools give surgeons the full range of options, all hand instruments have 190 mm working lengths that come in straight, up, left and right angles.

Instrumentation Kits 0242-200-000 Hip Arthroscopy Manual Instrumentation Kit

0242-000-112 Hip Arthroscopy Instruments Tray

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Art

hro

sco

py

6Stryker Sports Medicine Product Guide 1st Edition

Instrumentation Sets

AccessPart Number Outer Diameter Working Length Description

0242-200-001 5.5mm 140mm Slotted Cannula

0242-200-002 6.5mm 140mm Slotted Cannula

0242-200-003 4.0mm 302mm Cannulated Switching Stick

0242-200-004 5.5mm 302mm Cannulated Switching Stick

0242-200-005 6.0mm 302mm Cannulated Switching Stick Cannulated Switching Stick

BitersPart Number Outer Diameter Tip Direction Angled Direction Description

0242-200-006 4.0mm 0° Straight Hip Biter

0242-200-007 4.0mm 0° Up Hip Biter

GraspersPart Number Outer Diameter Tip Direction Angled Direction Description

0242-200-008 4.0mm 20° Right Hip Grasper

0242-200-009 4.0mm 20° Left Hip Grasper

0242-200-010 4.0mm 0° Straight Hip Grasper

Hip Biter

Grasper, Left

Grasper, Straight

Suture ManipulationPart Number Outer Diameter Tip Direction Angled Direction Description

0242-200-011 4.0mm Helix Left Hip Suture Passer

0242-200-012 4.0mm Helix Right Hip Suture Passer

0242-200-013 4.0mm 15° Straight Hip Suture Passer

0242-200-014 4.0mm 35° Up Hip Suture Passer

0242-200-015 4.0mm 0° Straight Hip Suture Grasper

0242-200-016 5.0mm 0° Straight Suture Cutter

0242-200-017 3.0mm 0° Straight Hip Knot Pusher

Suture Passer, Right

Suture Passer, Straight

Suture Grasper

Suture Cutter

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Hip

Art

hro

sco

py

Rigid InstrumentsPart Number Outer Diameter Tip Direction Angled Direction Description

0242-200-018 4.0mm 20° Up Hip Curette

0242-200-019 4.0mm 30° Up Rasp

0242-200-020 4.0mm 20° Up Hip Tissue Liberator

Curette

Rasp

Tissue Liberator

ProbesPart Number Outer Diameter Tip Direction Angled Direction Description

0242-200-021 3.0mm 90° Straight Hip Probe

0242-200-022 3.0mm 90° Curved Hip Probe Probe

MicrofracturePart Number Outer Diameter Tip Direction Angled Direction Description

0242-200-023 2.3mm 0° Straight Microfracture Pick

AccessoriesPart Number Description

0242-200-024 Curved Hip Blade*

0242-200-025 Straight Hip Blade, Blunt Tip*

0242-200-026 Straight Hip Blade. Sharp Tip*

0242-200-027 Switching Stick Handle*

*Additional hardware not included in Stryker Hip Arthroscopy Instruments Kit

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Art

hro

sco

py


IDEAL EYES Autoclavable ArthroscopesFitting

Part Number

Outer Diameter

View Direction

Field of View

Working LengthLight Post Direction

Locking Mechanism

Eyepiece0502-204-030 4.0 mm 30° 105° 165 mm Standard Speed-Lock

0502-204-070 4.0 mm 70° 105° 165 mm Standard Speed-Lock

C-Mount0502-804-030 4.0 mm 30° 105° 165 mm Standard Speed-Lock

0502-804-070 4.0 mm 70° 105° 165 mm Standard Speed-Lock

5.8 mm Series Speed-Lock Hardware

• For Long 4.0 mm, 165 mm Arthroscopes

0502-577-550 5.8 mm Cannula, 2 Rotating Stopcocks

0502-577-515 Pencil Tip Obturator 5.8 mm Long Cannula

0502-577-015 5.8 mm long pencil tip cannulated obturator

Sterilisation Trays and Accessories

0295-720-000 Hip Arthroscopy Access Kit

0295-800-000 Arthroscopy Access Sterilisation Tray Lid

0295-800-200 Arthroscopy Access Hardware XL Sterilisation Tray

0295-800-300 Arthroscopy Access Arthroscope Sterilisation Tray

0295-726-100 Screwdriver Handle

0266-722-100 4.0 mm Switching Stick

0266-723-100 5.0 mm Switching Stick

0275-720-300 Hip Needle

0275-720-500 Nitinol Guidewire (3/pack)

0266-721-100 Hip Cannula Plug

0266-724-000 Irrigation Adaptor

0266-725-000 Sealing Cap

Hip Bridges 0295-727-200 Dual rotating stopcock

0295-727-100 Single rotating stopcock

0295-727-202 Dual fixed stopcock

0295-727-101 Single fixed stopcock

• Fully cannulated cutter cannula-and-bridge system for seamless portal exchange

• Innovative obtrocar design• For use with 165 mm

IDEAL EYES Arthroscopes, 30 and 70 degree

Cannula Size ■ 4.0 mm ■ 5.0 mm ■ 5.5 mm

Cannula 0295-723-100 0295-724-100 0295-725-100

Cannula with Distal Holes 0295-723-110 0295-724-110 0295-725-110

Cannulated Obturator 0295-723-120 0295-724-120 0295-725-120

Cannulated Obtrocar 0295-723-130 0295-724-130 0295-725-130

Cannulated Trocar 0295-723-140 0295-724-140 0295-725-140

Visualisation

Access

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Hip

Art

hro

sco

py

TransPort Hip Access System

The TransPort Cannulas are offered in 3 hip-specific lengths to accommodate most patient sizes. The versatile cannulas allow for in-situ adjustments to account for swelling and help maintain optimal positioning within the joint space The polymer construction is designed to reduce the potential for iatrogenic damage, while the proximal securement threads are designed to maintain portal position during instrument insertion and removal. Cannulas accept most commonly used instruments including curved shavers and burrs, allowing for a reduction in the amount of naked portal plunges to help protect soft tissues from iatrogenic damage.

Tissue Protection Takes On A New FormPivot Medical’s TransPort Hip Access system is designed to allow the surgeon to access the central, peripheral and lateral compartments to treat pathology found in the hip.

TransPort Cannulas CAT00222 TransPort Cannula, 08mm, Length 1,2,3

CAT00223 TransPort Cannula, 08mm, Length 4,5,6

CAT00224 TransPort Cannula, 08mm, Length 7,8,9

TransPort Cannulas

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Art

hro

sco

py


Pivot Samurai Blades

Samurai Blades CAT00227 Samurai Blade, Full Radius

CAT02421 Samurai Curved Blade, Full Radius

The extremely sharp Samurai Blade cuts through thick capsule with ease and the ergonomic handle allows for control and comfort for precision capsule cutting and labral takedown. The Samurai’s hip-specific length and single body construction are designed to accommodate most patient sizes and helps to minimise the potential for blade breakage.

Samurai Curved Blade, Full Radius

The contour of the Samurai Curved Blade is designed to

reduce the risk of iatrogenic damage.

Samurai Blade, Full Radius

The extremely sharp tip of the Samurai Blade is designed

to cut through thick, capsular tissue.

FlowPort II Cannula with Obturator and Adapters

The FlowPort II cannulas and associated obturator are made of a radiopaque polymer design helps to reduce the potential for iatrogenic damage and is compliant against joint surfaces. The 5.0mm inner diameter allows for fluid inflow to maintain joint distention and visualization. When the adapter and scope construct is attached to the FlowPort cannula the system moves together between portals. Adapters are offered to fit many scope varieties and allow for adjustable inflow and outflow.

CAT00776 FlowPort II Cannula (Smith & Nephew) with ObturatorCAT00777 FlowPort II Adapter (Smith & Nephew)CAT01548 FlowPort II Cannula (Stryker) with ObturatorCAT02438 FlowPort II Cannula (Stryker 165mm) with ObturatorCAT00778 FlowPort II Adapter (Stryker)CAT01549 FlowPort II Cannula (Linvatec and Storz) with ObturatorCAT01030 FlowPort II Adapter (Linvatec)CAT00779 FlowPort II Adapter (Storz)

Portal Entry Kit

The Portal Entry Kit contains all essential disposable items needed for joint access during hip arthroscopy including:

17 Gauge Spinal Needles (2) Nitinol Guidewire (2)30cc Syringe (1) Ruler (1)Marking Pen (1)

CAT00241 Portal Entry Kit

The challenge is access. The answer is TransPort.

The FlowPort II cannulas and associated obturator are made of aradiopaque polymer design that helps to reduce the potential for iatrogenic damage and is compliant against joint surfaces. The 5.0mm inner diameter allows for fluid inflow to maintain joint distention and visualisation. When the adapter and scope construct is attached to the FlowPort cannula the system moves together between portals. Adapters are offered to fit many scope varieties and allow for adjustable inflow and outflow.

Flowport II Cannulas with Obturator and Adaptors

CAT00776 FlowPort II Cannula (Smith & Nephew) with Obturator

CAT00777 FlowPort II Adapter (Smith & Nephew)

CAT01548 FlowPort II Cannula (Stryker) with Obturator

CAT02438 FlowPort II Cannula (Stryker 165mm) with Obturator

CAT00778 FlowPort II Adapter (Stryker)

CAT01549 FlowPort II Cannula (Linvatec and Storz) with Obturator

CAT01030 FlowPort II Adapter (Linvatec)

CAT00779 FlowPort II Adapter (Storz)

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Hip

Art

hro

sco

py

The Stick comes with graduated markings to allow a hip specific reading from the capsule to the skin providing for an appropriately sized TransPort Cannula. The Stick comes cannulated for DALA entry and easy insertion over a 1.2mm guidewire or non-cannulated.

The TransPort Obturator is a reusable device that is compatible with all 3 sizes of the TransPort Cannulas. The obturator’s adjustable shaft is marked on the distal end to allow for appropriate size selection of the TransPort cannula while the cannulated ergonomic handle allows for comfort and ease of entry over the graduated stick.

The ergonomic handle and metal construction of the Capsule Punch allows for superior control during initial joint entry when extremely tough thick capsule is present. This entry places a pilot hole facilitating easy entry of the FlowPort II Cannula. The Capsule Punch is cannulated to accept a 1.2mm guidewire for precise placement.


Stick

The Stick comes with graduated markings to allow a hip-specific reading from the capsule to the skin providing for an appropriately sized TransPort Cannula. The Stick comes cannulated for DALA entry and easy insertion over a 1.2mm guidewire or non-cannulated.

CAT01515 Stick, Cannulated CAT01514 Stick, Non-Cannulated

Capsule Punch


CAT00599 Capsule Punch, Reusable

TransPort Obturator

The TransPort Obturator is a reuseable device that is compatible with all 3 sizes of the TransPort Cannulas. The obturator’s adjustable shaft is marked on the distal end to allow for appropriate size selection of the TransPort cannula while the cannulated ergonomic handle allows for comfort and ease of entry over the graduated stick.

CAT00792 TransPort Obturator, Reuseable

Port Access Instrument Tray

The Port Access instrument tray was designed specifically to contain the comprehensive line of Pivot Medical instrumentation products that will allow surgeons to quickly and efficiently address hip arthroscopy challenges such as access, visualization, refixation and restoration .

CAT02145 Port-Access Instrument Tray

0086

A surgeon must always rely on his or her own professional clinical judgment when deciding whether to use a particular product when treating a particular patient. Stryker does not dispense medical advice and recommends that surgeons be trained in the use of any particular product before using it in surgery.

The information presented is intended to demonstrate the breadth of Stryker product offerings. A surgeon must always refer to the package insert, product label and/or instructions for use before using any Stryker product. Products may not be available in all markets because product availability is subject to the regulatory and/or medical practices in individual markets. Please contact your Stryker representative if you have questions about the availability of Stryker products in your area.

Stryker Corporation or its divisions or other corporate affiliated entities own, use or have applied for the following trademarks or service marks: FlowPort, Port Access, Samurai, Stryker, The Movement in Hip Restoration, TransPort. All other trademarks are trademarks of their respective owners or holders.

Pivot Medical, Inc.A Stryker Sports Medicine Company247 Humboldt CourtSunnyvale, CA 94089 USA

TRANSP-BRO-1


Stick

The Stick comes with graduated markings to allow a hip-specific reading from the capsule to the skin providing for an appropriately sized TransPort Cannula. The Stick comes cannulated for DALA entry and easy insertion over a 1.2mm guidewire or non-cannulated.

CAT01515 Stick, Cannulated CAT01514 Stick, Non-Cannulated

Capsule Punch



TransPort Obturator

The TransPort Obturator is a reuseable device that is compatible with all 3 sizes of the TransPort Cannulas. The obturator’s adjustable shaft is marked on the distal end to allow for appropriate size selection of the TransPort cannula while the cannulated ergonomic handle allows for comfort and ease of entry over the graduated stick.

CAT00792 TransPort Obturator, Reuseable

Port Access Instrument Tray

The Port Access instrument tray was designed specifically to contain the comprehensive line of Pivot Medical instrumentation products that will allow surgeons to quickly and efficiently address hip arthroscopy challenges such as access, visualization, refixation and restoration .

CAT02145 Port-Access Instrument Tray

0086

A surgeon must always rely on his or her own professional clinical judgment when deciding whether to use a particular product when treating a particular patient. Stryker does not dispense medical advice and recommends that surgeons be trained in the use of any particular product before using it in surgery.

The information presented is intended to demonstrate the breadth of Stryker product offerings. A surgeon must always refer to the package insert, product label and/or instructions for use before using any Stryker product. Products may not be available in all markets because product availability is subject to the regulatory and/or medical practices in individual markets. Please contact your Stryker representative if you have questions about the availability of Stryker products in your area.

Stryker Corporation or its divisions or other corporate affiliated entities own, use or have applied for the following trademarks or service marks: FlowPort, Port Access, Samurai, Stryker, The Movement in Hip Restoration, TransPort. All other trademarks are trademarks of their respective owners or holders.

Pivot Medical, Inc.A Stryker Sports Medicine Company247 Humboldt CourtSunnyvale, CA 94089 USA

TRANSP-BRO-1

CAT01515 Stick, Cannulated

CAT01514 Stick, Non-Cannulated

CAT00792 TransPort Obturator, Reusable


Stick

TransPort Obturator

Capsule Punch

Pivot Portal Entry Kit• Kit conveniently contains all disposable instruments needed for access to the hip joint.• Specifically assembled for hip arthroscopy with spinal needles, nitinol guidewires, syringe,

ruler and marking pen.• Designed to help reduce the time and effort necessary to access and treat the hip joint.

Quantity Description

CAT00241 Portal Entry Kit 2 17 Gauge Spinal Needles

2 Nitinol Guidewire

1 30cc Syringe

1 Ruler

1 Marking Pen

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Art

hro

sco

py


Pivot NanoPass Suture Management System

• The NanoPass small puncture footprint, approximately half the size of a typical suture passer, offers minimal labrum disruption.

• Mattress, intra-labral or simple stitch may be accommodated as well as various labral pathologies with the multiple tip shapes.

• Delivers and retrieves sutures via a single portal and is designed to allow for close approximation to the acetabular rim.

NanoPass Suture Managers CAT02298 NanoPass Reach, Crescent

CAT01355 NanoPass Reach, 45° Left

CAT01356 NanoPass Reach, 45° Right

NanoPass Reach, Crescent NanoPass Reach, 45° Left NanoPass Reach, 45° Right

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Hip

Art

hro

sco

py

Pivot NanoTack Flex Suture Anchor System

• Flexible delivery system may facilitate increased safety margins by reducing joint penetration with multiple angles of approach.

• Simplistic coinciding anchor and pilot hole trajectory are designed to allow for seamless implantation where intended.

• Compact, high-strength implant yields fixation strength.

Ordering Information

DescriptionCatalog No.

NanoTack Suture Anchor, 1.4m

m w

ith Flex InserterCAT01858

NanoTack Flex Drill BitCAT01859

NanoTack Flex GuideCAT01860

NanoTack Flex ObturatorCAT01861

NanoTack GuideCAT01371

NanoTack ObturatorCAT01372

KnotPusherCAT01518

For more inform

ation about the NanoTack Flex System,

or to request a demo, please call Pivot M

edical at 1-866-596-2022

The NanoTack Flex System allow

s placement near the

labro-cartilage junction in multiple trajectories through a

straight or curved guide allowing placem

ent of multiple

non-everting stitches to allow for com

plete labrum

refixation even in hard to reach areas.

A surgeon must alw

ays rely on his or her own professional clinical judgm

ent when deciding w

hether to use a particular product when treating a particular

patient. Stryker does not dispense medical advice and recom

mends that surgeons be trained in the use of any particular product before using it in surgery.

The information presented is intended to dem

onstrate the breadth of Stryker product offerings. A surgeon must alw

ays refer to the package insert, product label and/or instructions for use before using any Stryker product. Products m

ay not be available in all markets because product availability is subject to the

regulatory and/or medical practices in individual m

arkets. Please contact your Stryker representative if you have questions about the availability of Stryker products in your area.

Stryker Corporation or its divisions or other corporate affiliated entities own, use or have applied for the follow

ing trademarks or service m

arks: NanoTack, Stryker, The M

ovement in Hip Restoration. All other tradem

arks are trademarks of their respective ow

ners or holders.

Pivot Medical, Inc.

A Stryker Sports Medicine Com

pany247 Hum

boldt CourtSunnyvale, CA 94089 USAN

ANOT-BRO-1

NanoTack Flex Anatomic Labrum

Restoration System

NanoTack Flex Anatomic Labrum Restoration Systems

CAT01858 NanoTack Suture Anchor, 1.4mm with Flex Inserter

CAT01859 NanoTack Flex Drill Bit

CAT01860 NanoTack Flex Guide

CAT01861 NanoTack Flex Obturator

CAT01371 NanoTack Guide

CAT01372 NanoTack Obturator

CAT01518 KnotPusher

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Art

hro

sco

py


Pivot CinchLock SS Knotless Anchor System

• Designed for precise anchor placement in challenging environments with optional-use Sport Sheath.• Allows for greater control over repairs with independent cinching capability and an internal

suture locking feature to allow for fixation independent of bone quality.• “One-click lock and release” offers speed and simplicity by reducing surgical steps.

CinchLock SS Knotless Anatomic Labrum

Restoration System

CinchLock SS Ordering Information


CinchLock SS Knotless Anchorw

/InserterCAT02462

CinchLock SS Drill BitCAT02463

CinchLock SS Drill GuideCAT02064

CinchLock SS ObturatorCAT02065

For more inform

ation about the CinchLock SS Knotless Anatom

ic Labrum Restoration

System, or to request a dem

o, please call Pivot M

edical at 1-866-596-2022

CinchLock SS optional-use Sport Sheath offers assistance when navigating off-angle anchor

delivery facilitating anchor placement in challenging environm

ents during labrum restoration


Restoration System.

A surgeon must alw


ent when deciding w












arks: CinchLock, Stryker. All other tradem


ners or holders.

Pivot Medical, Inc.


pany247 Hum

boldt CourtSunnyvale, CA 94089 USACINCH

L-BRO-1

CinchLock SS Knotless Anatomic Labrum Restoration System

CAT02462 CinchLock SS Knotless Anchor w/Inserter

CAT02463 CinchLock SS Drill Bit

CAT02064 CinchLock SS Drill Guide

CAT02065 CinchLock SS Obturator

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Art

hro

sco

py


Pivot CinchLock Flex Knotless Anchor System

• Utilises flexible drill technology and a curved instrumentation system for shoulder and hip labral repair, allowing close proximity to the labrum on the glenoid and acetabular rim

• The flexible anchor provides matched insertion and drill-hole trajectories, facilitating pin-point anchor placement and seamless implantation.

• The “One-Click Lock and Release” Deployment System provides the anchor with speed and simplicity for the surgeon

• Allows for independent cinching of sutures via direct tactile feedback and individual suture tensioning after insertion which provides total control to the surgeon

CinchLock Flex Knotless Anatomic Labrum Restoration System

CAT02643 CinchLock Flex Anchor w/Inserter

CAT02644 CinchLock Flex Drill Bit

CAT02645 CinchLock Flex 2.4mm 20° Slant Drill Guide

CAT02934 CinchLock Flex 2.4mm 20° Fish Mouth Guide

CAT02646 CinchLock Flex Obturator

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Hip

Art

hro

sco

py

Pivot Phoenix Microfracture System

• Designed to reduce the chance of induced fracture by allowing for a larger number of small diameter holes.

• Guide configuration specific to hip offers unobstructed access to the chondral defect and is designed to facilitate repeatable, precise bone hole placement.

• Designed to extract bone during drilling.

Phoenix Microfracture System CAT02418 Phoenix Drill Guide

CAT02504 Phoenix Drill Bit

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Art

hro

sco

py


SlingShot Single Portal Capsule Restoration

• Variable suture stitch placement allows for capsular plication.• Customised suture length delivery allows for quick and easy suture retrieval.• Tip options allow the surgeon to pass and retrieve varying lengths of suture into multiple

locations in the joint through one portal in one pass.

SlingShot 45° Up

SlingShot 70° Up

SlingShot Single Portal Capsule Restoration

CAT02589 SlingShot 45° Up

CAT02590 SlingShot 70° Up

CAT01585 Zipline #2 Suture, Green/White co-braid (12/Pk)

CAT01586 Zipline #2 Suture, Black/White co-braid (12/Pk)

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Art

hro

sco

py


Injector II Capsule Restoration System

• Capsule retraction capability ensures complete visualisation to the peripheral hip compartment providing full access to the cam pathology

• Capsule closure capability restores normal capsule anatomy• Single portal suture passing and retrieval streamlines procedure step• Bite depth of 3.5mm (per side) provides repeatable stitch depth for controlled tissue

apposition.

Injector II Capsule Restoration

CAT01856 Injector II Handle

CAT01857 Injector II Cartridge

CAT01585 Zipline #2 Suture, Green/White co-braid (12/Pk)

CAT01586 Zipline #2 Suture, Black/White co-braid (12/Pk)

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Shoulder Arthroscopy21 ICONIX All Suture Anchor System

21 ICONIX Anchors

22 ICONIX Guides

22 ICONIX Obturator

22 ICONIX Drills/Awl

22 Tray

23 ICONIX TT All Suture Anchor System

24 ReelX STT Knotless Anchor System

25 Knotilus Knotless Anchors

25 Knotilus Implants

25 Knotilus Instrumentation

26 PEEK Zip Anchors

26 PEEK IntraLine Sulture Anchors

26 PEEK IntraLine Punch-Tap

27 Titanium IntraLine Suture Anchors




31 VersiTomic G-Lok Suspensory Fixation System

31 VersiTomic G-Lok Implants

31 VersiTomic Drills/Instruments

32 Champion Shoulder Instrumentation Set

32 Champion Instruments

33 Champion Sliders

34 Champion Suture Passers

35 Champion Slingshot Suture Passers

36 MicroFX Osteochondral Drilling System

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Sh

ou

lder

Art

hro

sco

py ICONIX

All Suture Anchor System

ICONIX Anchorswith IntelliBraid Technology

3910-500-512 ICONIX 1 1 strand #2 Force Fiber

Use w/1.4mm instrumentation

3910-500-522 ICONIX 2 2 strands #2 Force Fiber






• The simplistic colour coded design with IntelliBraid Technology and small drills with Self Centring Technology reduce the risk of human error, allow for optimal fixation reducing the possibility of loose bodies in the joint, and result in minimal bone removal and accurate pilot hole placement.

• The Guide, Anchor, Suture and Obturator options allow for a variety of techniques in numerous repairs.

Introduction Searching For a Better Option

IntelliBraid Technology

Without SC Technology

Self-Centering Technology

With SC Technology

12.0 mm

ICONIX 1

4.5 mm

3.0 mm

ICONIX 2,3,25

Measurements - Before

4.0 mm

8.0 mm

Measurements - Before Measurements - After


• The IntelliBraid Technology creates a bunching effect using targeted compression zones within the implant sheath for optimal fixation

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Sh

ou

lder

Art

hro

sco

py


ICONIX Obturator 3910-500-562 Pencil Tip Obturator SHORT for 1.4mm anchor

3910-500-563 Pencil Tip Obturator SHORT for 2.3mm anchor

3910-500-564 Trocar Tip Obturator for 1.4mm anchor

3910-500-565 Trocar Tip Obturator for 2.3mm anchor

ICONIX Drills/Awl 3910-500-568 1.4mm Disposable Drill

3910-500-569 2.3mm Disposable Drill

3910-500-571 1.4mm Reusable Straight Drill

3910-500-573 2.3mm Reusable Straight Drill

3910-500-574 2.3mm Reusable Awl

Tray 3910-500-575 Multi-System Reusable Tray

ICONIX Guides 3910-500-550 Straight Guide SHORT for 1.4mm anchor

3910-500-551 Straight Guide SHORT for 2.3mm anchor

3910-500-552 Straight Guide for 1.4mm anchor

3910-500-553 12º Guide for 1.4mm anchor


3910-500-555 Straight Guide for 2.3mm anchor







Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Sh

ou

lder

Art

hro

sco

py


ICONIX TT All Suture Anchor System

• With Stryker’s XBraidTT, the ICONIXTT offers the first ever all-suture anchor system with tie-able tape suture

• Available as a 1.4mm and a 2.3mm anchor

Introduction Searching For a Better Option


Without SC Technology

Self-Centering Technology

With SC Technology

12.0 mm

ICONIX 1

4.5 mm

3.0 mm

ICONIX 2,3,25

Measurements - Before

4.0 mm

8.0 mm

Measurements - Before Measurements - After


• The IntelliBraid Technology creates a bunching effect using targeted compression zones within the implant sheath for optimal fixation

ICONiX TT 3910-500-312 ICONiX TT 1, 1.4mm Anchor

3910-500-322 ICONiX TT 2, 2.3mm Anchor

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Sh

ou

lder

Art

hro

sco

py ReelX STT

Knotless Anchor System• Proximal PEEK eyelet design helps to protect the tuberosity from suture damage.• Allows for patient specific tissue tensioning with the simplistic locking mechanism giving

greater control over repairs.• PEEK anchor body expands up to one full millimetre in diameter under the cortical surface.• Sharp metal tip designed to allow anchor insertion with or without instrumentation.

ReelX STT (5/Pk)

3910-600-060 5.5mm Knotless Anchor

3910-600-062 4.5mm Knotless Anchor

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Sh

ou

lder

Art

hro

sco

py


Knotilus Knotless Anchors• The Knotilus Implant Loop uses luggage tag technology to provide an enhanced bumper.• Two guide tip options, laser lines on the inserter, and the unique loop and tail design allow

for surgeon preference and ease of use.• The unique decorticating reusable drill along with the non-friction relying secure loop in the

centre of the implant optimise procedures.

Knotilus Implants 3910-500-100 3.5mm Anchor, 3.5mm

3910-500-107 25mm Implant Loop (5/Pk)

Knotilus Instrumentation 3910-500-101 3.5mm Drill Guide, Sawtooth

3910-500-102 3.5mm Drill Guide, Fishmouth

3910-500-103 3.5mm Obturator Bullet Tip

3910-500-104 3.5mm Step Drill

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Sh

ou

lder

Art

hro

sco

py PEEK Zip Anchors

• Trocar-tip inserter to withstand greater torque and for repositioning if necessary.• Double-helix thread design for excellent purchase.• Separate suture eyelets for better suture management.• Available in 5.5mm and 6.5mm sizes. With and without needles.

PEEK Zip Anchors 3910-200-035 5.5mm Anchor

3910-200-030 5.5mm Anchor with Needles

3910-200-075 6.5mm Anchor


PEEK IntraLine Sulture Anchors

PEEK IntraLine Sulture Anchors

3910-400-010 5.5mm Anchor


3910-400-020 6.5mm Anchor


PEEK IntraLine Punch-TapOptimised for use with 5.5mm and 6.5mm PEEK IntraLine anchors

3910-004-055 5.5mm Punch-Tap

3910-004-060 6.5mm Punch-Tap

• The PEEK IntraLine is a fully-threaded anchor with a suture eyelet. The Force Fiber eyelet runs through the centre of the anchor, providing flexibility for the working suture.

• Offered in 5.5mm and 6.5mm sizes. With and without needles.

PEEK IntraLine Suture AnchorPEEK IntraLine AnchorThe PEEK IntraLine is a fully-threaded anchor with a suture eyelet. The Force Fiber suture eyelet runs through the center of the anchor, providing flexibility for the working suture.

O�ered in 5.5mm and 6.5mm sizes, with and without needles, the PEEK IntraLine Anchor is an excellent tool for rotator cu� and other soft-tissue repairs.

Features:

Suture eyelet.

Fully threaded anchor design.

5.5mm and 6.5mm sizes.

With and without needles.

Simple Handle Design forOpen Cases

The PEEK IntraLine Anchor is excellentfor arthroscopic and open cases. For open cases, the needles are loaded onForce Fiber Suture and housed in the handle. Once the anchor is implanted, simply slide open the handle and remove the needles. The distal end of the shaft on the version with needles is slotted for simplicity and ease of use.

PEEK IntraLine AnchorFor arthroscopic repairs, the PEEK IntraLine Anchor features a fully cannulated shaft to house the high-strength Force Fiber working suture. The handle is large for better grip and ergonomics. At the proximal end of the handle, the suture is neatly wound. With one straight pull, the suture simply unwinds and the inserter is ready to be removed. The PEEK IntraLine Anchor is designed for a quick and simple delivery.

Punch-Tap Features:Punch and tap with one instrument.

Optimized f use with 5.5mm and6.5mm PEEK IntraLine .

Available in 5.5mm sizes.

Strength & Flexibility In Soft-Tissue Repair

471_08.indd 2-3 5/30/08 10:31:22 AM

Strength & Flexibility In Soft-Tissue Repair

PEEK IntraLine Anchor

471_08.indd 1 5/30/08 10:31:13 AM

PEEK IntraLine

Suture Anchor


The PEEK IntraLine is a fully-threaded anchor with a suture eyelet. The Force

Fiber suture eyelet runs through the center of the anchor, providing flexibility

for the working suture.

O�ered in 5.5mm and 6.5mm sizes, with and without needles, the

PEEK IntraLine Anchor is an excellent tool for rotator cu� and

other soft-tissue repairs.Features:Suture eyelet.

Fully threaded anchor design.

5.5mm and 6.5mm sizes.

With and without needles.Simple Handle Design for

Open CasesThe PEEK IntraLine Anchor is excellent

for arthroscopic and open cases. For

open cases, the needles are loaded on

Force Fiber Suture and housed in the handle.

Once the anchor is implanted, simply slide

open the handle and remove the needles.

The distal end of the shaft on the version

with needles is slotted for simplicity and

ease of use.


For arthroscopic repairs, the PEEK IntraLine Anchor features a fully cannulated shaft to house the high-

strength Force Fiber working suture. The handle is large for better grip and ergonomics. At the proximal end

of the handle, the suture is neatly wound. With one straight pull, the suture simply unwinds and the inserter is

ready to be removed. The PEEK IntraLine Anchor is designed for a quick and simple delivery.

Punch-Tap Features:

Punch and tap with one instrument.

Optimized f use with 5.5mm and

6.5mm PEEK IntraLine .

Available in 5.5mm

sizes.

Strength & Flexibility

In Soft-Tissue Repair

471_08.indd 2-3

5/30/08 10:31:22 AM

PEEK Zip 6.5mm Anchor

PEEK IntraLine 5.5mm Anchor

PEEK IntraLine 5.5mm Punch-Tap

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Sh

ou

lder

Art

hro

sco

py


Titanium IntraLine Suture Anchors

• The Titanium IntraLine is a fully-threaded anchor with a suture eyelet. The Force Fiber suture eyelet runs through the centre of the anchor, offering flexibility for the working suture.

• Offered in 5.5mm and 6.5mm sizes, with and without needles, the Titanium IntraLine Anchor is an excellent tool for rotator cuff and other soft-tissue repairs.

Titanium IntraLine Sulture Anchors

3910-400-050 5.5mm Anchor


3910-400-060 6.5mm Anchor


Titanium IntraLine AnchorFor arthroscopic repairs, the Titanium IntraLine Anchor features a fully cannulated shaft to house the high-strength Force Fiber® working suture. The handle is large for better grip and ergonomics. At the proximal end of the handle, the suture is neatly wound. With one straight pull, the suture unwinds and the inserter is ready to be removed. The Titanium IntraLine Anchor is designed for a quick and simple delivery.

Mechanical Features:

Excellent suture sliding, less than 2.2 lbs of force required.1

Internal suture eyelet composed of one strand No. 1 Force Fiber®.

Designed to decrease torque required for insertion.

5.5mm IntraLine Anchor3910-400-050

6.5mm IntraLine Anchor3910-400-060

5.5mm IntraLine Anchor with Needles3910-400-055

6.5mm IntraLine Anchor with Needles3910-400-065

Simplicity & Predictability in Soft Tissue Repair

Simplicity & Predictability in Soft Tissue Repair

Titanium IntraLine Anchor

Titanium IntraLine 5.5mm Anchor

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Sh

ou

lder

Art

hro

sco

py Pivot NanoTack Flex

Suture Anchor System• Flexible delivery system may facilitate increased safety margins by reducing joint

penetration with multiple angles of approach.• Simplistic coinciding anchor and pilot hole trajectory are designed to allow for seamless

implantation where intended.• Compact, high-strength implant yields fixation strength.

Ordering Information


NanoTack Suture Anchor, 1.4m

m w

ith Flex InserterCAT01858

NanoTack Flex Drill BitCAT01859

NanoTack Flex GuideCAT01860

NanoTack Flex ObturatorCAT01861

NanoTack GuideCAT01371

NanoTack ObturatorCAT01372

KnotPusherCAT01518

For more inform

ation about the NanoTack Flex System,

or to request a demo, please call Pivot M

edical at 1-866-596-2022

The NanoTack Flex System allow

s placement near the

labro-cartilage junction in multiple trajectories through a

straight or curved guide allowing placem

ent of multiple

non-everting stitches to allow for com

plete labrum

refixation even in hard to reach areas.

A surgeon must alw


ent when deciding w












arks: NanoTack, Stryker, The M

ovement in Hip Restoration. All other tradem


ners or holders.

Pivot Medical, Inc.


pany247 Hum

boldt CourtSunnyvale, CA 94089 USAN

ANOT-BRO-1

NanoTack Flex Anatomic Labrum

Restoration System

NanoTack Flex Anatomic Labrum Restoration Systems

CAT01858 NanoTack Suture Anchor, 1.4mm with Flex Inserter

CAT01859 NanoTack Flex Drill Bit

CAT01860 NanoTack Flex Guide

CAT01861 NanoTack Flex Obturator

CAT01371 NanoTack Guide

CAT01372 NanoTack Obturator

CAT01518 KnotPusher

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Sh

ou

lder

Art

hro

sco

py


Pivot CinchLock SS Knotless Anchor System

• Designed for precise anchor placement in challenging environments with optional-use Sport Sheath.• Allows for greater control over repairs with independent cinching capability and an internal

suture locking feature to allow for fixation independent of bone quality.• “One-click lock and release” offers speed and simplicity by reducing surgical steps.


Restoration System

CinchLock SS Ordering Information


CinchLock SS Knotless Anchorw

/InserterCAT02462

CinchLock SS Drill BitCAT02463

CinchLock SS Drill GuideCAT02064

CinchLock SS ObturatorCAT02065

For more inform

ation about the CinchLock SS Knotless Anatom

ic Labrum Restoration

System, or to request a dem

o, please call Pivot M

edical at 1-866-596-2022

CinchLock SS optional-use Sport Sheath offers assistance when navigating off-angle anchor

delivery facilitating anchor placement in challenging environm

ents during labrum restoration


Restoration System.

A surgeon must alw


ent when deciding w












arks: CinchLock, Stryker. All other tradem


ners or holders.

Pivot Medical, Inc.


pany247 Hum

boldt CourtSunnyvale, CA 94089 USACINCH

L-BRO-1

CinchLock SS Knotless Anatomic Labrum Restoration System

CAT02462 CinchLock SS Knotless Anchor w/Inserter

CAT02463 CinchLock SS Drill Bit

CAT02064 CinchLock SS Drill Guide

CAT02065 CinchLock SS Obturator

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Sh

ou

lder

Art

hro

sco

py


Pivot CinchLock Flex Knotless Anchor System

• Utilises flexible drill technology and a curved instrumentation system for shoulder and hip labral repair, allowing close proximity to the labrum on the glenoid and acetabular rim

• The flexible anchor provides matched insertion and drill-hole trajectories, facilitating pin-point anchor placement and seamless implantation.

• The “One-Click Lock and Release” Deployment System provides the anchor with speed and simplicity for the surgeon

• Allows for independent cinching of sutures via direct tactile feedback and individual suture tensioning after insertion which provides total control to the surgeon

CinchLock Flex Knotless Anatomic Labrum Restoration System

CAT02643 CinchLock Flex Anchor w/Inserter

CAT02644 CinchLock Flex Drill Bit

CAT02645 CinchLock Flex 2.4mm 20° Slant Drill Guide

CAT02934 CinchLock Flex 2.4mm 20° Fish Mouth Guide

CAT02646 CinchLock Flex Obturator

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Sh

ou

lder

Art

hro

sco

py VersiTomic G-Lok

Suspensory Fixation System• Sized to promote secure fixation and minimise the tunnel size needed for passing.• Multiple loop sizes and a no loop option allow for versatility and customisable fixation.• The braided continuous loop is the latest technology in high performance medical-grade fibre• G-Lok XL is available to provide extra length and width to the G-Lok.

VersiTomic G-Lok Implants 0234-100-000 G-Lok No Loop

0234-100-016 G-Lok XL

VersiTomic Drills/Instruments 0234-020-111 Graft Sizing Block

0234-040-045 4.5mm VersiTomic Cannulated Drill
















Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Sh

ou

lder

Art

hro

sco

py


Champion Shoulder Instrumentation Set

Suture Sliders, Rasps, Knot Pusher• Simplistic colour coded design reduces the risk of human error in arthroscopic shoulder cases.• Versatile instruments allow for multiple techniques in bone and tissue preparation as well

as suture passage, including loading suture transversely. Razor sharp tips on suture needles allow for ease in tissue penetration.

• Costs are lowered with non-disposable suture passage instruments (StabiliHook & Cuff Hook) and a suture slider handle that is reusable for all needles.

Champion Instruments 3910-500-722 ■ StabiliHook Left

3910-500-723 ■ StabiliHook Right

3910-500-724 ■ Cuff Hook Left

3910-500-725 ■ Cuff Hook Right

3910-500-727 ■ Suture Manipulator

3910-500-728 ■ Tissue Grasper with Ratchet

3910-500-729 ■ Crochet Hook

3910-500-730 ■ Knot Manipulator Full Loop

3910-500-731 ■ Rasp Up Bend 20°

3910-500-732 ■ Rasp Down Bend 20°

3910-500-733 ■ Tissue Liberator Blade Up

3910-500-734 ■ Tissue Liberator Blade Down

3910-500-735 ■ Penetrating Grasper Right

3910-500-736 ■ Penetrating Grasper Left

3910-500-737 ■ Penetrating Grasper Straight

3910-500-738 ■ Penetrating Grasper 30º

3910-500-739 ■ Penetrating Grasper 45º

3910-500-740 ■ Suture Grasper with Ratchet

3910-500-741 ■ Suture Grasper

3910-500-742 ■ Suture Cutter 2mm

3910-500-800 Probe 3mm

3910-500-850 Probe 5mm

The Champion Shoulder instrumentation system was designed with simplicity in mind. Clever instruments like the StabiliHook and Cuff Hook allow for suture passage without the use of disposable elements. Razor sharp tips al-low easier penetration of tough tissue during shoulder arthroscopy. The Stitch Blade Suture Cutter adds versatility to any technique by giving the surgeon the unique opportunity to load the suture transversely. Aggressive rasps and traumatic liberators can be used for preparation of bone and tissue.

Champion Instruments Simplicity & Versatility

Tissue Grasper with Ratchet

Suture Grasper with Ratchet

Suture Grasper

Tissue Grasper used to pull tissue over bone, pull RC into anatomical position; with ratchet.

Tissue & Suture Graspers

Tissue Grasper with Ratchet

Suture Grasper with Ratchet

Suture Grasper

■ Suture Grasper

Penetrating Graspers

Penetrating Grasper Left

Penetrating Grasper Right

Penetrating Grasper Straight

Penetrating Grasper 45º


Penetrating Graspers: Suture passage and retrieval; Left, Right, Straight, 45º and 30º

Penetrating Grasper Left

Penetrating Grasper Right

Penetrating Grasper Straight



■ Penetrating Grasper

StabiliHook

StabiliHook Left

StabiliHook Right

The StabiliHook was specifically designed for suture passing and retrieving at the 6 o’clock position of the glenoid

labrum. Emphasis must be placed on a rotation technique that involves piercing the labrum with the distal tip of the

device and rotating the tip through the tissue. Using a twist-in, twist-out motion, the StabiliHook is designed for

instability repair.

Cuff Hook

Cuff Hook Left

Cuff Hook Right

The Cuff Hook was specifically designed for suture passing and retrieving during rotator cuff repair. The suture can be

retrieved by piercing the superior portion of the rotator cuff with the sharp distal tip of the instrument, rotating through

the tissue, and then retrieving the suture using a twisting retrograde motion. Suture can be passed by grasping the suture

and anti-grading the distal tip through the inferior portion of the rotator cuff. Both of these techniques use an intuitive

twist-in, twist-out motion.

StabiliHook Left

StabiliHook Right

Cuff Hook Left

Cuff Hook Right

■ StabiliHook

StabiliHook

StabiliHook Left

StabiliHook Right

The StabiliHook was specifically designed for suture passing and retrieving at the 6 o’clock position of the glenoid

labrum. Emphasis must be placed on a rotation technique that involves piercing the labrum with the distal tip of the

device and rotating the tip through the tissue. Using a twist-in, twist-out motion, the StabiliHook is designed for

instability repair.

Cuff Hook

Cuff Hook Left

Cuff Hook Right

The Cuff Hook was specifically designed for suture passing and retrieving during rotator cuff repair. The suture can be

retrieved by piercing the superior portion of the rotator cuff with the sharp distal tip of the instrument, rotating through

the tissue, and then retrieving the suture using a twisting retrograde motion. Suture can be passed by grasping the suture

and anti-grading the distal tip through the inferior portion of the rotator cuff. Both of these techniques use an intuitive

twist-in, twist-out motion.

StabiliHook Left

StabiliHook Right

Cuff Hook Left

Cuff Hook Right

■ Cuff Hook

Suture ManipulatorSuture Manipulator

Suture Manipulator is used to manipulate suture and/or Nitinol wire of suture sliders.

Suture Cutter

Suture Cutter

Due to its unique transverse loading technique, the Stitch Blade Suture Cutter allows for more versatility than conventional

cutters. A surgeon can use the distal tip as a knot pusher to throw a final half-hitch and then cut both strands without leaving

the joint-space. To operate the device, the handle portion of the device is squeezed, locking the suture in the eyelet. The device

may be slid up and down the length of the suture with less potential for unload. The device is slid down the suture to the knot

and with a simple squeeze of the trigger, the suture is cut.

Crochet HookCrochet Hook

The Crochet Hook is used to retrieve suture within the joint.

Knot ManipulatorKnot Manipulator

The Knot Manipulator is used during knot tying to advance the knot down the suture and up against the tissue.

Suture Manipulator

Suture Cutter 2mm

Crochet Hook

Knot Manipulator Full Loop

■ Suture Manipulator Suture ManipulatorSuture Manipulator


Suture Cutter

Suture Cutter










Suture Manipulator

Suture Cutter 2mm

Crochet Hook


■ Suture Cutter



Suture Cutter

Suture Cutter










Suture Manipulator

Suture Cutter 2mm

Crochet Hook


■ Crochet Hook



Suture Cutter

Suture Cutter










Suture Manipulator

Suture Cutter 2mm

Crochet Hook


■ Knot Manipulator

Tissue LiberatorTissue Liberator Blade Up

Tissue Liberator Blade Down

Designed for preparation of bone & tissue; Liberator separates tissue from bone.

Rasp Bend

Rasp Bend Up

Rasp Bend Down

Designed for preparation of bone & tissue; Rasp used to create bleeding on the glenoid to prep a labrum reattachment site.

Tissue Liberator Blade Up


Rasp Up Bend 20º

Rasp Down Bend 20º

■ Tissue Liberator

Tissue LiberatorTissue Liberator Blade Up


Designed for preparation of bone & tissue; Liberator separates tissue from bone.

Rasp Bend

Rasp Bend Up

Rasp Bend Down

Designed for preparation of bone & tissue; Rasp used to create bleeding on the glenoid to prep a labrum reattachment site.

Tissue Liberator Blade Up


Rasp Up Bend 20º

Rasp Down Bend 20º

■ Rasp Bend

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Sh

ou

lder

Art

hro

sco

py Champion Sliders 3910-500-750 ■ Champion Slider Handle

3910-500-751 ■ Slider Needle 45º Right

3910-500-752 ■ Slider Needle 45º Left

3910-500-753 ■ Slider Needle 25º Right

3910-500-754 ■ Slider Needle 25º Left

3910-500-755 ■ Slider Needle Crescent Large

3910-500-756 ■ Slider Needle Crescent Medium

3910-500-757 ■ Slider Needle 30º Straight

3910-500-758 ■ Slider Needle 60º Straight

3910-500-759 ■ Slider Needle Crescent Large XL

3910-500-760 ■ Slider Needle Crescent Medium XL

3910-500-761 ■ Slider Nitinol Shuttle

Diamond Tip Technology The Diamond Tip design holds the wire in place and allows the surgeon to grasp easily in the joint space.

Outer Diameter The new Champion Sliders are 25% smaller than the previous Suture Sliders.

Multiple Color Coded OptionsThe system offers a variety of color coded curved needles for easier recognition and efficient suture passing.

Tactile Feedback The innovative color cap locks into place with a click, providing tactile feedback.

Razor SharpThe razor sharp needles of the sliders allow for multiple uses.

Champion SlidersEfficient & Reliable













Champion Slider HandleReusable handle fits all needles

Nitinol Wire

Medium XL & Large XL CrescentFor Hip Arthroscopy

25º Right & Left

45º Right & Left

Medium & Large Crescent

30º & 60º Straight

■ Champion Slider Handle

■ Slider Needle 45°

• Multiple Colour Coded Options for easier recognition and efficient suture passing

• Colour cap locks into place with a click, providing tactile feedback

• Razor Sharp needles of the sliders allow for multiple uses

25º Right & Left

45º Right & Left Medium &

Large Crescent


■ 45° Slider Needle

25º Right & Left


Large Crescent30º & 60º Straight

■ 25° Slider Needle

25º Right & Left


Large Crescent


■ Crescent Slider Needle

25º Right & Left

45º Right & Left

Medium & Large Crescent


■ 30° Straight Slider Needle

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Sh

ou

lder

Art

hro

sco

py


Champion Suture Passers 3910-900-086 Ratchet Straight

3910-900-087 Ratchet Humpback

3910-900-088 Ratchet Straight Capture

3910-900-089 Ratchet Humpback Capture

3910-900-091 Champion Passer Needle (Disposable, 5/Pk)

• The Champion Suture Passer is designed to optimise surgeon efficiency by simplifying suture management during arthroscopic rotator cuff repairs. With four unique, ratcheting jaw options, the ergonomically designed instrument offers a complete solution for medial and lateral row suture passing.

• Comfortable, ergonomic design of the reusable handle provides an easy to use, single-handed suture passing device.

• The sleek Ratchet Safety Button, and finger controlled Ratchet Release Lever, allow the surgeon to easily control and self-manage the ratcheting mechanism during the procedure.

Champion Suture Passers Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Sh

ou

lder

Art

hro

sco

py Champion Slingshot

Suture Passers• The Champion Slingshot has been optimised for use in the shoulder and allows the surgeon to

both pass and retrieve suture using a single portal. • Its ergonomically designed thumb-slide mechanism helps to simplify the suture passing and

retrieval steps and eliminate additional procedural steps.• The small Nitinol Arms allow for the ability to quickly retrieve the suture, while the razor

sharp needle tip helps to minimise potential damage to the labral tissue.

Champion Slingshot CAT02854 Champion Slingshot, 45° Left

CAT02855 Champion Slingshot, 45° Right

CAT02862 Champion Slingshot, 70° Up

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Sh

ou

lder

Art

hro

sco

py MicroFX

Osteochondral Drilling System• The guide mouth design and dimensions result in precision and stability helping to maintain

structural integrity of the subchondral bone.• The universal drill along with the multiple guide, curette and snap cap options enable

surgeons to access various defect areas, create vertical shoulders of mechanically stable cartilage and select appropriate drill depth to stimulate blood flow.

• The fluted drill tip provides clear channels to the healing site by extracting bone.

MicroFX OCD 3910-500-575 Multi-System Tray

0234-200-000 0° MicroFX OCD Guide




0234-200-145 45° MicroFX OCD Guide, Long



0234-200-004 4mm MicroFX OCD Snap Cap




0234-200-010 Angled Ring Curette

0234-200-011 Angled Reverse Triangle Curette

0234-200-012 Angled Pear Curette

0234-200-110 Long Angled Ring Curette

0234-200-111 Long Angled Reverse Triangle Curette

0234-200-112 Long Angled Pear Curette

0234-200-200 MicroFX OCD Universal Drill

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

General Arthroscopy40 ICONiX All-Suture Anchor with Needles

41 Conquest Manual Instruments

41 Punches

42 Scissors

42 Graspers

42 Probes

42 Sterilisation Trays

43 Champion Small-Joint Instruments

43 Small-Joint Instruments

44 Dri-Lok Cannulas

44 Standard 75 mm Length Dri-Lok Cannula

44 Long 90 mm Hip Length Dri-Lok Cannula

44 Accessories

45 Force Fiber Sutures

46 XBraid TT Suture (tape)

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Gen

era

l A

rth

rosc

op

y ICONIX with Needles All Suture Anchor System

ICONIX Needleswith IntelliBraid Technology

3910-500-212 ICONIX 1 with Needles 1.4mm Anchor with 1.2mm XBraid TT

3910-500-412 ICONIX 1 with Needles 1.4mm Anchor with 1 strand #2 Force Fiber

3910-500-222 ICONIX 2 with Needles 2.3mm Anchor with 2.0mm XBraid TT

3910-500-422 ICONIX 2 with Needles 2.3mm Anchor with 2 strands #2 Force Fiber

• Combining all the features of the standard and TT ICONiX range, the ICONiX with needles system comes pre-packed with single use drill and guide.

• Available in both 1.4mm and 2.3mm Xbraid and standard #2 Force Fiber suture options.

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Gen

era

l A

rth

rosc

op

y

PunchesPart Number Outer Diameter Tip Direction Angled Direction Description

0300-027-100 2.7 mm 0° Straight Big Bite Punch

0300-027-101 2.7 mm 30° Right Big Bite Punch

0300-027-102 2.7 mm 30° Left Big Bite Punch

0300-027-103 2.7 mm 15° Up Big Bite Punch

0300-034-100 3.4 mm 0° Straight Big Bite Punch

0300-034-101 3.4 mm 30° Right Big Bite Punch

0300-034-102 3.4 mm 30° Left Big Bite Punch

0300-034-103 3.4 mm 15° Up Big Bite Punch

0300-027-200 2.7 mm 0° Straight Narrow Punch

0300-034-200 3.4 mm 0° Straight Narrow Punch

0300-034-203 3.4 mm 15° Up Narrow Punch

0300-034-300 3.4 mm 0° Straight Scoop Jaw Punch

0300-034-301 3.4 mm 30° Right Scoop Jaw Punch

0300-034-302 3.4 mm 30° Left Scoop Jaw Punch

0300-027-104 2.7 mm 0° Straight Upshaft Big Bite Punch

0300-034-104 3.4 mm 0° Straight Upshaft Big Bite Punch

0300-034-110 3.4 mm 45° Left Tip Biter

0300-034-111 3.4 mm 45° Right Tip Biter

0300-034-500 3.4 mm 0° Right Meniscal Crescent Punch

0300-034-501 3.4 mm 0° Left Meniscal Crescent Punch

0300-034-502 3.4 mm 30° Right Meniscal Crescent Punch

0300-034-503 3.4 mm 30° Left Meniscal Crescent Punch

0300-034-400 3.4 mm 90° Right Rotary Punch

0300-034-401 3.4 mm 90° Left Rotary Punch

0300-034-800 3.4 mm 0° Straight Backbiter

Conquest Manual Instruments

Big Bite Punch

Narrow Punch

Upshaft Big Bite Punch

Meniscal Crescent Punch

Rotary Punch

Scoop Jaw Punch

Tip Biter

Angled Meniscal Crescent Punch

Back Biter

• Conquest is Stryker’s line of manual instruments including punches, scissors, and graspers designed to provide top-notch performance.

• The Conquest set includes sharp, highly durable components with extremely tight tolerances, combined to create the ultimate tissue resection tool.

• Heat-treated stainless steel offers excellent strength, while wire EDM technology provides sharp edges on all cutting surfaces.

• Stryker’s exclusive contoured meniscal crescent design provides surgeons easy access in difficult-to-reach posterior areas of the meniscus, while ninety degree rotary punch enables surgeons to access anterior to medial third of the meniscus.

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Gen

era

l A

rth

rosc

op

y


ScissorsPart Number Outer Diameter Angled Direction Description

0300-034-600 3.4 mm Straight Hook Scissor

0300-034-601 3.4 mm Right Hook Scissor

0300-034-602 3.4 mm Left Hook Scissor

0300-027-603 2.7 mm Straight Micro Scissor Punch

0300-034-603 3.4 mm Straight Micro Scissor Punch

GraspersPart Number Outer Diameter Ratchet Length Description

0300-027-702 2.7 mm 120 mm Soft Tissue Grasper with Ratchet

0300-034-702 3.4 mm 120 mm Soft Tissue Grasper with Ratchet

0300-034-701 3.4 mm – Loose Body Grasper

0300-034-700 3.4 mm – Loose Body Grasper with Ratchet

0300-027-703 2.7 mm 120 mm Soft Tissue Grasper without Ratchet



0300-034-380 – – Claw Rongeur

ProbesPart Number Outer Diameter Angled Direction Description

3910-500-800 3.0 mm Straight Calibrated Probe (one piece)

3910-500-850 5.0 mm Straight Calibrated Probe (one piece)

Sterilisation Trays

Sterilisation Trays for Arthroscopic Manual Instruments

0242-000-012 12 Instrument Sterilisation Tray


Hook Scissor

Micro Scissor Punch

Loose Body Grasper

Grasper

Probe

Rongeur

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Gen

era

l A

rth

rosc

op

y

Champion Small-Joint Instrumentation System

0242-100-000 Small-Joint Instrumentation Kit

Kit includes the following:


0242-100-002 2.1 mm Straight Blunt Nose

0242-100-003 2.1 mm Right Blunt Nose

0242-100-004 2.1 mm Left Blunt Nose

0242-100-005 2.1 mm Down Blunt Nose

0242-100-006 2.1 mm Up Blunt Nose

0242-100-007 2.5 mm Scissors

0242-100-008 2.5 mm Grasper

0242-100-012 2.7 mm Straight Blunt Nose

0242-100-013 2.7 mm Up Blunt Nose

0242-100-014 Small-Joint Probe Straight

0242-100-015 Small-Joint Probe 90°

0242-100-016 Small-Joint Probe 30°

Additional Small-Joint Instruments

0242-010-200 Mini 2.0 mm Small-Joint Punch

0242-010-300 Mini 2.0 mm Small-Joint Grasper

0242-010-400 Mini 2.0 mm Small-Joint Scissors

Small-Joint Instruments

Champion Small-Joint Instruments

• This durable instrument set includes small joint specialty punches, graspers, and scissors that range in size from 2.1mm to 2.7mm.

• Combines increased sharpness, highly durable components, and extremely tight tolerances for the ultimate in tissue resection capabilities.

• Set includes up, down, right, and left biters for hard to reach tissue pathology.• All instruments have a replaceable safety pin mechanism built into the handle. If the

instrument experiences an abnormally high load of force, the safety pin will break instead of the working instrument tip.

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Gen

era

l A

rth

rosc

op

y


Standard 75 mm Length Dri-Lok CannulaQuantity: Box of 5

5.0 mm 6.5 mm 8.0 mm

Threaded 3910-075-500 3910-075-650 3910-075-800

Non-Threaded 3910-075-501 3910-075-651 3910-075-801

Distal Threaded 3910-075-502 3910-075-652 3910-075-802

Reusable Cannulated Obturator – 3910-075-006 3910-075-008

Long 90 mm Hip Length Dri-Lok CannulaQuantity: Box of 5

5.0 mm 6.5 mm 8.0 mm

Threaded 3910-090-500 3910-090-650 3910-090-800

Reusable Cannulated Obturator – 3910-090-006 3910-090-008

Accessories

Accessories for the Dri-Lok Cannulas 0266-719-000 4.0 mm Wissinger Rod (Small) – For use with 6.5 mm Dri-Lok CannulasUse with reusable cannulated obturator

0266-720-000 5.0 mm Wissinger Rod (Large) – For use with 8.0 mm Dri-Lok Cannulas

0266-721-000 Wissinger Rod Handles (2/Pk)

0266-722-000 4.0 mm Switching Stick (Small) – For use with 6.5 mm Dri-Lok CannulasUse with reusable cannulated obturator

0266-723-000 5.0 mm Switching Stick (Large)

Dri-Lok Cannulas• Dri-Lok cannulas come in threaded, non-threaded, and distal threaded

options, which helps to accommodate a wide range of shoulder and hip procedures.

• Stryker cannulas feature a “no-leak triple-seal” design, adjustable inflow/outflow valves, shatter-resistant plastic constructions, and colour-coding sizes to improve usability for surgeons and safety for patients.

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Gen

era

l A

rth

rosc

op

y Force Fiber Sutures• Force Fiber is a surgical suture designed for excellent tensile and knot break strength.

Combined with Stryker’s full line of anchors, Force Fiber helps provide strength when it matters most.

• Force Fiber is a non-absorbable surgical suture composed of a unique, ultra-high molecular weight, polyethylene fibre.

• Designed to offer greater tensile strength that polyester and polyblend sutures, as well as increased lubricity and knot break strength, Force Fiber is excellent for ligation of soft tissue and bone.

Force Fiber Sutures12/Pk

3910-900-020 #2 Force Fiber, Blue Co-Braid 38” Strand with 1/2 Circle Taper Needle (26mm)

3910-900-021 #2 Force Fiber, Blue Co-Braid 38” Strand

3910-900-022 #2 Force Fiber, Blue Co-Braid 38” Strand with 1/2 Circle K Point Needle (39mm)

3910-900-024 #2 Force Fiber, Blue Co-Braid 38” Strand with 1/2 Circle Taper Needle (39mm)

3910-900-050 #5 Force Fiber, Blue Co-Braid 38” Strand with 3/8 Circle Cutting Needle (49mm)

3910-900-051 #5 Force Fiber, Blue Co-Braid 38” Strand

#2 Force Fiber, Blue Co-Braid with 1/2 Circle Taper Needle (26mm)

63910

-900

-020

#2

For

ce F

iber

® with

1/2

Cir

cle

Tape

r Nee

dle

(26m

m)

3910

-900

-022

#2

For

ce F

iber

® with

1/2

Cir

cle

K-P

oint

Nee

dle

(39m

m)

3910

-900

-024

#2

For

ce F

iber

® with

1/2

Cir

cle

Tape

r Nee

dle

(39m

m)

3910

-900

-050

#5

For

ce F

iber

® with

3/8

Cir

cle

Cut

ting

Nee

dle

(49m

m)

Join

t P

rese

rvati

on

Forc

eFi

ber®

Sut

ure

–S

treng

thW

hen

itM

atte

rsM

ost

Ava

ilable

Configura

tions

• 391

0-90

0-02

1 #

2 Fo

rce

Fibe

r®

• 391

0-90

0-05

1 #

5 Fo

rce

Fibe

r®

63910

-900

-020

#2

For

ce F

iber

® with

1/2

Cir

cle

Tape

r Nee

dle

(26m

m)

3910

-900

-022

#2

For

ce F

iber

® with

1/2

Cir

cle

K-P

oint

Nee

dle

(39m

m)

3910

-900

-024

#2

For

ce F

iber

® with

1/2

Cir

cle

Tape

r Nee

dle

(39m

m)

3910

-900

-050

#5

For

ce F

iber

® with

3/8

Cir

cle

Cut

ting

Nee

dle

(49m

m)

Join

t P

rese

rvati

on

Forc

eFi

ber®

Sut

ure

–S

treng

thW

hen

itM

atte

rsM

ost

Ava

ilable

Configura

tions

• 391

0-90

0-02

1 #

2 Fo

rce

Fibe

r®

• 391

0-90

0-05

1 #

5 Fo

rce

Fibe

r®

#2 Force Fiber, Blue Co-Braid with 1/2 Circle K Point Needle (39mm)

#2 Force Fiber, Blue Co-Braid with 1/2 Circle Taper Needle (39mm)

63910

-900

-020

#2

For

ce F

iber

® with

1/2

Cir

cle

Tape

r Nee

dle

(26m

m)

3910

-900

-022

#2

For

ce F

iber

® with

1/2

Cir

cle

K-P

oint

Nee

dle

(39m

m)

3910

-900

-024

#2

For

ce F

iber

® with

1/2

Cir

cle

Tape

r Nee

dle

(39m

m)

3910

-900

-050

#5

For

ce F

iber

® with

3/8

Cir

cle

Cut

ting

Nee

dle

(49m

m)

Join

t P

rese

rvati

on

Forc

eFi

ber®

Sut

ure

–S

treng

thW

hen

itM

atte

rsM

ost

Ava

ilable

Configura

tions

• 391

0-90

0-02

1 #

2 Fo

rce

Fibe

r®

• 391

0-90

0-05

1 #

5 Fo

rce

Fibe

r®

63910

-900

-020

#2

For

ce F

iber

® with

1/2

Cir

cle

Tape

r Nee

dle

(26m

m)

3910

-900

-022

#2

For

ce F

iber

® with

1/2

Cir

cle

K-P

oint

Nee

dle

(39m

m)

3910

-900

-024

#2

For

ce F

iber

® with

1/2

Cir

cle

Tape

r Nee

dle

(39m

m)

3910

-900

-050

#5

For

ce F

iber

® with

3/8

Cir

cle

Cut

ting

Nee

dle

(49m

m)

Join

t P

rese

rvati

on

Forc

eFi

ber®

Sut

ure

–S

treng

thW

hen

itM

atte

rsM

ost

Ava

ilable

Configura

tions

• 391

0-90

0-02

1 #

2 Fo

rce

Fibe

r®

• 391

0-90

0-05

1 #

5 Fo

rce

Fibe

r®

#5 Force Fiber, Blue Co-Braid with 3/8 Circle Cutting Needle (49mm)

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Gen

era

l A

rth

rosc

op

y XBraid TT Suture Tape• Smooth, low profile, 100% ultra-high molecular weight polyethylene• An increase in the suture footprint can be achieved as the tape allows the suture to lie flat

against the tissue (no internal core)• Specifically designed to not fold under tension due to the custom braid technology• The tape will easily slide after anchor insertion and during knot tying• Ultimate tissue pull through load: 206N2

XBraid TT 12/Pk

3910-900-018 2.0mm XBraid TT 1, Blue Co-Braid 39” Strand

3910-900-017 1.2mm XbraitTT, Blue-Co-Braid 45” Strand

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

General Information

50 Terms & Conditions of Supply

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Gen

era

l In

form

ati

on

Terms & Conditions of Supply

1. Interpretation

In these terms and conditions: “Customer” means a person (including a successor or an assignee) acquiring the goods and/or services from Stryker; “person” includes body corporate, firm, unincorporated body, a joint venture, partnership, association or government agency; “Stryker” means Stryker Australia Pty Ltd ABN 48 002 873 850; “goods” means any equipment, material, components, merchandise or other products supplied by Stryker; Related Body Corporate has the meaning set out in section 50 the Corporations Act, 2001. These terms and conditions are in lieu of and replace any and all terms and conditions set forth in any documents issued by Customer.

2. Delivery & Risk

Unless otherwise agreed between Stryker and Customer delivery terms are FOB Stryker’s dispatch warehouse (as defined in Incoterms 2010). Delivery shall be deemed to have been made when Customer’s goods have been delivered to a carrier nominated by Customer or failing such nomination then to a carrier selected by Stryker. Customer bears the risk of any loss, damage or deterioration to the goods due to any cause whatsoever after such delivery and is responsible for all transportation costs in bringing the goods to their final destination. Any agreed date of delivery is an estimate only. Stryker does not guarantee delivery on that date and accepts no liability for delay in delivery for any reason whatsoever. Late, short or defective delivery does not entitle Customer to cancel any order. Urgent or expedited deliveries such as deliveries requested with less than 24 hours notice, loan kit deliveries that do not result in any purchase of Stryker goods or a delivery outside Stryker’s usual business hours of 7.00am to 5.00pm during business days may incur a special delivery charge at Stryker’s standard rates for that type of delivery,

3. Inspection & Acceptance

Customer agrees to inspect and/or test the goods promptly on receipt. The goods shall be deemed accepted by Customer unless Customer provides Stryker a timely written notice specifically notifying of defects or discrepancies in the quality or quantity of the goods received. All notices regarding non-conforming goods, shortages, rejection or revocation of acceptance must be made in writing and received by Stryker no later than 30 days from the date of Stryker’s invoice which Customer agrees is a reasonable time-frame to diligently inspect and provide notice to Stryker. Customer waives any right to reject the shipment or revoke acceptance thereafter.

4. Price

The purchase price for goods will, unless otherwise agreed in writing, be the price in Stryker’s price list(s) current, a) in the case of consignment stock and loan stock, on the date on which Customer uses the goods, or b) on the date the goods are delivered to Customer. Stryker may alter prices without notice and the purchase price of goods may be different from the price quoted or the price current when the goods were ordered. Prices in Stryker’s price lists do not include the cost of delivery. Prices are also exclusive of Goods and Services Tax (GST) and GST will be added to the price where applicable.

5. Settlement Terms

Customer must pay an invoice amount within thirty days (30 days) of the invoice date. Stryker reserves the right to charge interest on any overdue amounts at a rate of 2.5% per annum above the prevailing bank overdraft rate applying to Stryker as advised by Stryker (and subject to variation from time to time) until the overdue amounts are paid in full (to accrue from day to day). Stryker may also charge Customer for all costs and expenses incurred by Stryker in obtaining (or attempting to obtain) a remedy for any failure to pay on the due date.

6. Claims

Any claim of short or defective delivery must be made within seven (7) days of goods arriving at the delivery address. A claim of damaged goods must be made within fourteen (14) days of receipt of goods and be supported by a survey report or other documentary evidence as required by Customer’s insurance company. If Customer’s shipment is insured under a floating policy it must notify its insurance company of any claim.

Stryker Australia Pty Ltd

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Gen

era

l In

form

ati

on


7. Returned Goods

Stryker will not accept returned goods for which it has not authorised the return and will not credit Customer for the returned goods. Where Stryker has authorised the return of goods, all freight charges must be paid by Customer, including any costs paid by Stryker in respect of original delivery. Returned goods must be in a resaleable condition in original packaging and Customer must pay to Stryker a restocking charge equal to:

• 10% of the cost of the goods for returns within thirty (30) days of the date of the invoice;• 30% of the cost of the goods for returns within ninety (90) days of the date of the invoice;• 100% of the cost of the goods for returns over ninety (90) days from the date of the invoice.

To assist in crediting Customer account, the Stryker Customer number, original purchase order number and Stryker invoice number should be quoted on all returned goods.

8. Warranty and Liability

The goods are warranted free from manufacturing and material defects for a period of one year after delivery of same, with the following exceptions:

• Reusable irrigation tubing, tips and clips 30 days• Contra angle heads and reducers 90 days• Micro electric system fibre optic cables 90 days• Heavy duty powered instrument battery packs The earlier of 90 days or 100 sterilisation Cycles• Battery adapters 6 months• Steri -Shield battery and fibre optics cables 6 months• Handpiece power cords 6 months• Bur guards and bur shields 6 months• Burs, blades and cutting accessories No warranty

If Customer wishes to make a claim under this warranty, it must contact its local Stryker representative or the Stryker switchboard on 1800 803 601. Customer must (at its cost) return, with proof of purchase, the goods the subject of the warranty claim to Stryker at 8 Herbert Street, St Leonards NSW 2065. If Stryker finds on examination that the goods are faulty due to manufacturing or material defects and are within the specified warranty period, Stryker will, at its option:

• replace the goods or supply equivalent goods free of charge;• repair of the goods;• pay the cost of replacing the goods or of acquiring equivalent goods; or• pay the cost of having the goods repaired.

The warranty period is not renewed or extended as a result of the replacement or re -supply of the goods by Stryker.

The express warranty above is subject to the proper use by Customer in the application for which the goods were intended and any instructions outlined in the labelling, manual, and/or instructions for use being followed. This warranty does not cover any goods a) that have been misused, modified, refurbished or repaired without the prior consent of Stryker, b) that have been subjected to unusual stress or have not been properly maintained, or c) on which any original serial numbers or other identification marks have been removed or destroyed.

Where Customer is purchasing as a “consumer” within the meaning of the Competition and Consumer Act 2010 (Cth) (or an equivalent State or Territory enactment) (“Act”):

• the benefits under the above warranty are in addition to other rights and remedies Customer may have in relation to the goods; and

• our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n


Gen

era

l In

form

ati

on

Nothing in these conditions is intended to exclude, restrict or modify any statutory obligation of Stryker if that cannot lawfully be effected. However, where the goods are not of a kind ordinarily acquired for personal, domestic or household use and consumption, then the liability of Stryker to Consumer is limited to one of the following as determined by Stryker:

• the replacement of the goods or the supply of equivalent goods;• the repair of the goods;• the payment of the cost of replacing the goods or of acquiring equivalent goods; or• the payment of the cost of having the goods repaired.

Customer will promptly notify Stryker of any claim against Stryker under the Act. Stryker then shall only be liable to Customer in the event goods were defective (within the meaning of the Act) at the time of delivery and shall not be liable to the extent that any liability arises from any act or omission of Customer.Subject to this clause 8 and any legislation to the contrary:

• all other warranties, guarantees, conditions or representations by Stryker, expressed or implied and whether collateral or antecedent are expressly negatived and excluded;

• in no event will Stryker be liable for special, indirect, incidental, consequential or punitive damages of any nature, including, but not limited to, loss of profits or revenue.

9. Software License

Certain Stryker products contain software that is installed onto the products by Stryker. Stryker owns this software; this software is never sold. Each sale of a software-containing product, is not a sale of such software; it includes a license only to use the software in the product in which the software was initially installed.Any license granted by Stryker to use the software contained in its products does not give the licensee the right to copy, alter, disassemble, reverse engineer and create derivative works of such software or to use such software in either original or modified form in any product other than the Stryker product in which the software was initially installed by Stryker.Prior to delivering a product containing software, Stryker may require the customer to execute a license agreement to acknowledge the above and any additional terms under which Stryker may elect to license its software. If a customer elects not to sign a license agreement, Stryker reserves the right to cancel the order for the product containing the software. If a customer receives a Stryker product without agreeing to any additional licensee agreement, the customer is still bound by the license term set forth above.

10. Advice

To the fullest extent permitted by law:

• Customer acknowledges that it relies on its own skill and judgment in relation to the goods; and • Stryker will be under no liability for any unsuitability for any purpose of the goods irrespective of any knowledge

which it may possess as to the purpose for which the goods are required by Customer.

11. Force Majeure

Stryker is not liable for any failure to comply with any obligations set out in these terms and conditions if that failure is caused by an act beyond Stryker’s reasonable control.

12. Retention of Ownership

Unless otherwise agreed between Customer and Stryker title and property of the goods will not pass to Customer until payment in full is received by Stryker. Pending full and final payment of the purchase price Customer will hold possession of the goods as a bailee only. During such period Customer will take reasonable care of the goods and will not dispose of, damage or encumber the goods or any part of them in any way and will at the cost of Customer return the same goods without damage or encumbrance to Stryker immediately after Customer receives notice.

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Gen

era

l In

form

ati

on


13. PPSA

“PPSA” is the Personal Property Securities Act (2009) (Cth) and in this clause “Register”, “Purchase Money Security Interest”, “Security Agreement”, “Security Interest” and “Verification Statement” all have the meanings for those terms as defined in the PPSA. Customer acknowledges and agrees that each order fulfilled by Stryker for supply of consignment and loan stock, and goods on credit terms, constitutes a Security Agreement for the purposes of the PPSA and that Stryker may register its Security Interest in the goods and all proceeds (if any) received by Customer in relation to the goods as a Purchase Money Security Interest on the Register. Customer undertakes to promptly sign any further documents and to provide any further information (such information to be complete, accurate and up-to-date in all respects) which Stryker may require to make relevant registration on the Register. Where the PPSA applies to action taken by Stryker in relation to the goods, Customer a) agrees that sections 120, 125, 142 and 143 of the PPSA will not apply, and b) waives its right to receive any notices under sections 95, 118(1)(b), 121(4), 123(2), 130, 132(3)(d), 132(4) and 135 of the PPSA and any right to receive a Verification Statement under the PPSA.

14. Offer & Acceptance

These terms and conditions apply to the supply of all goods and/or services by Stryker to Customer and no contract for the supply of goods and/or services exists between Stryker and Customer except on these terms and conditions. Any order placed by Customer for goods and/or services inconsistent with these terms and conditions will not be accepted by Stryker unless such terms and conditions have been agreed to in writing by an authorised representative of Stryker. Where Customer places an order for goods and/or services on terms and conditions which vary from these terms and conditions, any subsequent delivery of ordered goods and/or services to Customer will be construed as a counter offer to supply the goods and services on these terms and conditions. Such counter offer is deemed to be accepted by Customer at the time of delivery of the goods and/or performance of the services.

15. Alterations to Terms & Conditions

These terms and conditions can be varied by Stryker at any time without notice to Customer. Alteration to these terms and conditions must be in writing and signed by an authorised representative of Stryker.

16. Assignment

Customer may not assign all or any of its rights under this agreement without the written consent of Stryker. Stryker may assign any or all of its rights or interests under this agreement without the written consent of Customer to any Related Body Corporate.

17. Severance

Should any part of these terms and conditions be held to be void or unlawful, these terms and conditions are to be read and enforced as if the void or unlawful provisions had been deleted.

18. Governing Law

This agreement and the transactions contemplated by this agreement are governed by the law in force in New South Wales.

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Stryker Australia

PO Box 970 Artamon NSW 15701800 803 602 (between 7am – 6pm EST)

New Zealand

PO Box 17136Greenlane Auckland 1130(09) 573 1894 (between 7am – 6pm)

Phone Order Details

Our Customer Service Department is available to take your phone and fax orders from 7:30am through 6:00pm Monday to Thursday and 7.30am through 5.30pm on Friday.

Australia

Toll Free for Stryker Australia Head Office1800 803 601Dedicated Customer Service phone line02 9467 1111Dedicated Customer Service fax line02 9467 1110

New Zealand

Stryker New Zealand Head Office0800 787 9287Dedicated Customer Service line09 5731 894Dedicated Customer Service fax line09 5731 895Email for Australia and New [email protected]

Hip

Arthroscop

yShould

er Arthroscop

yG

eneral A

rthrosco

py

Genera

l Inform

atio

n

Hip Arthroscopy AUSTRALIA & NEW ZEALAND Sports Medicine€¦ · 0295-720-000 Hip Arthroscopy Access...

Documents

Transcript of Hip Arthroscopy AUSTRALIA & NEW ZEALAND Sports Medicine€¦ · 0295-720-000 Hip Arthroscopy Access...